Scm T 160 pirkti naudotą (636)

Būklė: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Gjdpfx Aloiiv Dcs Njud Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Multi-spindle moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles to the right guide: 0 - 45 mm Min. and max. diameter of profile tools: 100 - 220 mm Min. and max. diameter of tools on the planing spindle: 120 - 140 mm Profile capacity of the second lower horizontal spindle with tool Ø 200 mm = 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7,500 m³/h Compressed air supply: 6 – 10 bar Weight: 6,000 kg Dimensions L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Lower horizontal spindle: Motor power: 11.0 kW Spindle speed: 6,000 rpm Right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 2nd lower horizontal spindle: Motor power: 12.0 kW Spindle speed: 8,300 rpm 2nd upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 3rd lower horizontal spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm SET-UP quick adjustment system Worktables with fine adjustment of all units via Control 100 PC control Axial travel of vertical spindle 80 mm for large tool diameters Pneumatically operated full safety cabin Feed system with universal joint drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Segmented pressure shoes after the upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Godjg Umrmspfx Al Neud Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic loader Note on used machinery: • Technical data and prior sale subject to change. • All prices quoted are ex-site – loaded free of charge! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Būklė: naujas, The best-selling edge banding machine in its class with an unrivaled price-performance ratio. SCM edge banding machine for plastic edging from 0.4 - 3 mm and solid wood edging up to 5 mm, equipped with a new corner rounding unit. Edgebanding thickness for roll material: 0.4 - 3 mm Maximum edgebanding thickness for strip material: 5 mm Min. – max. workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9,000 rpm Glue pot: 0.18 kW, 0.8 kg capacity Saw cross-cut unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL FEATURES Gusdpfx Alec S Di Re Nod Radius scraper Flat scraper Grooving unit: 1.1 kW, 12,000 rpm, groove width 4mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heated infeed fence Glue pot quick-change system ...

Būklė: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. Gusdpfx Aljcuwpte Nod • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 400 mm, Tuščioji masė: 2700 kg - Pagaminimo metai: 2013 m. - Dokumentacija: yra Godpfx Alswnii Re Nsud - CE žymėjimas: yra - CE sertifikatas: nėra - Serijos numeris: AA1/017355 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velenas Nr. 1: - Valdomų ašių skaičius [vnt.]: 3 - Maksimalus veleno sūkių skaičius [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 9,5 - Frezavimo stalo tipas: balkinis stalas - Gręžimo įrankiai: yra - Horizontalūs gręžimo velenai [vnt.]: 6 - Vertikalūs gręžimo velenai [vnt.]: 12 - Pjovimo įrenginys: yra - Sistema/programinė įranga: SCM Maestro - Darbinis plotas X [mm]: 3050 - Darbinis plotas Y [mm]: 1250 - Z ašies darbinis plotas [mm]: 1810 - Y ašies maksimalus eiga [mm]: 1550 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 31 - Transportavimo matmenys: 5240 mm x 2400 mm x 2244 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2700 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / diferencinis apmokestinimas: įmonėms PVM galima atskaityti Pristatymas ir senos įrangos atpirkimas galimi bet kuriuo metu, visoms pramoninėms prekėms Glenn Smeets

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, working width 220 mm working height 120 mm 4 heads spindle diameter 40 mm variable feed speed control star-delta start head adjustment in two axes electric adjustment of pressure beam spring-loaded feed roller clamps spindle speed 6000 rpm Gsdpfsyxlqxex Al Noud

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, labai gerai išlaikytas 4 peilių reikalas, mažai naudotas maksimalus apdirbimo plotis – 230 mm maksimalus apdirbimo aukštis – 120 mm veleno variklio galia: Guedpfx Aozlk U Hel Nod U – 5,5 kW L ir R – 7,5 kW O – 5,5 kW komplektuojamas su „Tersa“ tipo obliavimo galvutėmis.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008047, Pozicija 1: Šepetėlinė mašina SCM-BRAVOROBOT P1 Gujdpfx Aljw Idbye Nsd Pozicija 2: Dažymo mašina SCM-BRAVOROBOT P1 Pozicija 3: Perkėlimas SCM-BRAVOROBOT P1 Pozicija 4: Suslėgto oro džiovintuvas SCM-BRAVOROBOT P1 Pozicija 5: Lako džiovinimas SCM-BRAVOROBOT P1

Būklė: naudotas, Gamybos metai: 2005, Darbinis plotis: 180 mm Darbinis aukštis: 110 mm Darbiniai velenai: 4 Velenų išdėstymas: apačioje, dešinėje, kairėje, viršuje Variklio galia – apatinis & viršutinis velenas: 7,5 kW Variklio galia – dešinysis & kairysis velenas: 7,5 kW Apatinio veleno reguliavimas: - Dešinio veleno reguliavimas: - Kairio veleno reguliavimas: rankinis ratukas Viršutinio veleno reguliavimas: rankinis ratukas Obliaus galvos apačioje & viršuje: Centrolock Obliaus galvos kairėje ir dešinėje: Centrolock su profiliavimo galimybe Guedsyq R Aiopfx Al Nsd Padavimo greitis: 2 Padavimo volų prispaudimas: spyruoklė Srovės sunaudojimas: 32,8 A Ištraukimo jungtis: Staklių ilgis: Staklių plotis: Svoris:

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Guodpovvi I Rofx Al Nod

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Gedpfx Aevwbp Aol Noud

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, working area 2700x1250mm Gusdpfewp R Eijx Al Nod table size: 2700x1250 mm Z-axis travel: 160 mm rotary axis: C spindle motor power: 8.5 kW spindle speed: 24,000 rpm tool change magazine (auxiliary): 8 tools main tool magazine: 10 tools saw aggregate on X and Y axes vertical drills in X-axis: 8 pcs vertical drills in Y-axis: 5 pcs horizontal drills in X-axis: 4 pcs horizontal drills in Y-axis: 4 pcs tool holder: HSK 63 central lubrication pump vacuum raster table edge milling unit in X-axis year of manufacture: 2011

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Gujdpevvi Htofx Al Ned Sandėlio vieta: Sonnefeld

Būklė: naudotas, Gamybos metai: 2007, Judėjimo eiga: X=4400 Y=2195 Z=440 mm Darbinis laukas X=3650 mm Y=1560 mm Pralaidumas: 330 mm Elektros verpstė SCM Power 2000, didelės spartos frezavimo verpstė, 13 kW galia Sukimo ašis Vector (C ašis) Įrankio valymo pūstuvas frezavimo agregate Įrankio laikiklis HSK 63 F Sukimosi greitis 600–24 000 min⁻¹ bepakopis inverteriu Variklio galia 8,5 kW Įrankių laikikliai: 6 vnt. Įrankių keitiklis: Rapid 12 (12 vietų) Vakuuminis siurblys 250 m³/h, 5,5 kW Maksimalus vakuumas: 0,9 bar Stalo šoninis atskaitos taškas Gręžimo agregatas su 11 verpstėmis (7 vertikalios / 4 horizontalios) Valdymas: NUM serija 1000 Naudotojo sąsaja: XILOG Plus PC Office Aparatinė įranga WINDOWS XP Professional Bendra prijungimo galia: maks. 27,5 kW Svoris: 5200 kg Sandėliavimo vieta: Nattheim Gedew Dcb Sepfx Al Noud

Būklė: naudotas, Gamybos metai: 2001, Apačioje / dešinėje / kairėje / viršuje – „Centro Fix“ obliavimo galvutės. Maž./maks. apdirbimo plotis (galutinis matmuo): 23–180 mm. Maž./maks. apdirbimo aukštis (galutinis matmuo): 6–105 mm. Maž. ruošinio ilgis: 300 mm. Padavimo greitis: 6 / 12 aps./min. Veleno greitis: 6000 aps./min. Veleno skersmuo: 35 mm. Horizontaliojo veleno variklio galia: 7,5 kW. Vertikalaus veleno variklio galia: 5,5 kW. Padavimo variklio galia: 1 kW. Padavimo volelių skersmuo: 120 mm. Dulkių nusiurbimo antgalis 1 vnt.: 150 mm. Dulkių nusiurbimo antgalis 2 vnt.: 120 mm. Svoris: apie 950 kg. Gujdpfx Aloym D Eij Nod Sandėlio vieta: Nattheim.

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 160 mm Pakreipiamas velenas: -10° - 45° Apsisukimai: 3000/4500/6000/8000/10000 aps./min Rankinis veleno aukščio ir kampo reguliavimas Veleno fiksatorius Darbo stalo matmenys: 760/2500x1000/1500 mm Reguliuojamos liniuotės rankenos Variklio galia: 4 kW Maitinimas: 380 V Guedpfx Aljzd Ap Ts Njd Bendri matmenys: Ilgis: 1500 mm Plotis: 2500 mm Aukštis: 1350 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Apatinio veleno frezavimo staklės SCM T130 Godpozakgmefx Al Neud Veleno skersmuo: 35 mm Bendras veleno ilgis: 160 mm Pagrindinis variklis – 5,5 kW Sukimosi greitis (diržinis keitimas): 3000/4500/6000/7000/10000 aps./min. Veleno sukimasis į kairę ir dešinę Elektrinis veleno pakėlimas

Būklė: naudotas, Gamybos metai: 2000, Stalai, 260 cm Stalo ištraukiamoji dalis Variklis, 7,5 kW Skaitmeninė padėčių nustatymo sistema 5 greičio režimai Guodpfxszi Ewwj Al Ned 380 V

Būklė: naujas, Gamybos metai: 2025, New machine Year of manufacture: 2025 Standard equipment and accessories - Swiveling control panel, easily accessible by the operator, “eye-S 15” electronic control. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operation modes * Operator assistance with the option to manage 3 different points on the tool to determine the correct zero point * Capability to store up to 1000 programs with corresponding images * Capability to store up to 1000 different tools with corresponding images * USB port * Pre-wired for network connection - Operator assistance via the electronic control, complete with: * Tool database management * Indication of coordinates for 3 points on the tool to determine a new zero point * Management of tool edge speed * Operator guidance for the most common machining operations - "Flex" milling fence with automatic adjustment via the electronic control. The entire fence is referenced to tool diameter, infeed jaw for the desired chip removal. The "FLEX" fence can be pivoted away from the work table. - Aluminum fence jaw for the milling fence with continuous workpiece support inserts - "Fast" table insert, manually adjustable, instead of table rings for optimal workpiece support surface adjustment - Electrical pre-installation for a power feed unit - Spindle forward/reverse rotation - Automatic motor start - M-E version complete with: * Electric spindle with maximum power from 3,400 rpm * Electric spindle power 7.5 kW 10 HP [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling safety guard, max. tool diameter 160 mm - Electronic motor brake, guaranteed function even without mains power - Safety sensors for tool changes for: spindle stop, spindle lock, opening/closing tool holder - Electropneumatic spindle lock - Micro safety switch on machine door - Emergency stop switch - Lockable main switch - Motor protection switch - Auxiliary circuit 24V - CE Declaration of Conformity - 931201 Frequency 50 Hz - 083250 Machine base - 109993 MACHINE LANGUAGE: German - 109999 Standard safety regulations - 570257 Manual device for feed unit height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the control panel column, this device enables the feed unit to be pivoted away from the work table. - 930731 Voltage 400 EU - 570288 Quick tool clamping “T-SET” Allows clamping/unclamping of tools through simple use of an air gun. - R00845 L'invincibile TI 5 CE version Guodpfx Ajx Nbzuel Ned - 110293 Version “LL” work table with two cast iron table extensions. Total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - 131304 Milling spindle Ø 30 mm Availability: short notice

Būklė: naudotas, Stalinė freza SCM T130 NPS - naudota - Gujdpfsw Nv Nfjx Al Ned smulkiai reguliuojamas frezavimo tvartas, tarnavimo ir išpjovimo stalas, dešinė/kairė eiga ----- Techniniai duomenys ----- Stalo dydis: 1.080 x 750 mm, Veleno skersmuo: 30 mm, Greičiai: 3.000/4.500/6.000/7.000/10.000 aps./min., Ištraukimo anga Ø: 120 mm, Apatinė ištraukimo anga Ø: 120 mm

Gamybos metai: 2010, veikimo valandos: 540 h, būklė: paruoštas naudoti (naudotas), X ašies eiga: 3 060 mm, Y ašies eiga: 1 735 mm, Z ašies eigos atstumas: 250 mm, bendras svoris: 2 000 kg, ašių skaičius: 4, Šios 4 ašių medienos gręžimo staklės SCM TECH Z2-27-C buvo pagamintos 2010 m. Didžiausias ruošinio aukštis - 160 mm, ilgis - 2700 mm, o plotis - 1300 mm. Staklėse yra frezavimo velenas ir horizontalaus ištekinimo įrenginys, užtikrinantys operacijų universalumą. Jei norite įsigyti aukštos kokybės medienos apdirbimo galimybes, apsvarstykite mūsų parduodamas stakles SCM TECH Z2-27-C. Susisiekite su mumis dėl išsamesnės informacijos. Gsdpfxoy Dd R Io Al Noud • Elektra: 400 V, 3 + N, 33 A, 50 Hz, išjungimo galia 10 kA • Valdymas: Xilog Plus". • Apdirbimo įrenginiai: pjūklo įrenginys (įeina į komplektą), horizontaliojo ištekinimo įrenginys (įeina į komplektą), frezavimo velenas: 1 • Ruošinio talpa: didžiausias aukštis 160 mm; didžiausias ilgis 2700 mm; didžiausias plotis 1300 mm; didžiausias plotis (dvigubi stulpai) 1210 mm • Didžiausias važiavimo greitis: 60 m/min • Prispaudimo sistema: pneumatiniai fiksatoriai; prispaudimo strypų skaičius: 6 • siurbtukų dydžiai: 120x120 mm ir 55x120 mm • Mašina įjungta: 5.500 h

Būklė: labai geros būklės (naudotas), Apatinės veleno frezavimo staklės SCM T150 Veleno skersmuo: 35 mm Bendras veleno ilgis: 180 mm Elektrinis veleno pakėlimas Elektrinis liniuotės judėjimas Gedpfx Aow Ral Hjl Nsud Elektriškai reguliuojamas kampas -10/45° Kintamas veleno greitis: 3000-4500-6000–7000-10000 aps./min Variklio galia 5,5 kW DTR techninė dokumentacija

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, ašies skersmuo: 30 mm, sukimosi greitis (maks.): 10 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, aukščio reguliavimo tipas: elektrinis, frezos veleno ilgis: 140 mm, Apatinio veleno frezavimo staklės SCM T130E Veleno skersmuo: 30 mm Veleno ilgis: 140 mm Veleno apsukos (kintamos): 3000/4500/6000/7000/10000 aps./min Pagrindinio variklio galia: 7,5 kW Elektroninis veleno aukščio reguliavimas jungikliu Pakrovimas: 4 volelių Padavimo greičio reguliavimas variatoriumi CE sertifikatas Techninė dokumentacija (DTR) Gusdpexzyltsfx Al Nod

Būklė: labai geros būklės (naudotas), Four-side Planer SCM Sintex XL Gujdpfxjw Hbf Is Al Njd Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum workpiece length: 300 mm Spindle diameter: 35 mm Feed speed adjustable via frequency inverter: 4-12 m/min Technical documentation CE certificate

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, Keturpusi obliavimo staklės SCM SUPERSET XL Pagaminimo metai: 2007 Staklės dirbo tik 50 valandų, praktiškai kaip naujos. Techniniai duomenys: • Darbinis plotis iki 240 mm • Darbinis aukštis iki 120 mm • Velenų apsisukimų greitis: 6000 aps./min • Nuolatinė padavimo reguliacija: 5–25 m/min • Velenų išdėstymas (5 velenai): - apatinis 7,5 kW - dešinys 7,5 kW - kairys 7,5 kW - viršutinis 7,5 kW - apatinis 7,5 kW Gjdpfx Asyhhx Nol Nsud • Visi įrankiniai velenai su nepriklausomais varikliais Staklės turi 2 vertikalius (2 ir 3) velenus su HSK85S greita jungtimi.