Scm Si 3200 pirkti naudotą (579)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 45 mm, bendras aukštis: 1 650 mm, bendras ilgis: 2 800 mm, bendras plotis: 1 220 mm, bendras svoris: 660 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Kantavimo staklės, naudotos po techninės apžiūros. - Pagaminta Italijoje - Nedažyta - Labai gera būklė - Naudotos kantavimo staklės Techniniai parametrai Įranga: - Lėkštė - Klijų bakelis (granuliuotas) - Giljotina – išankstinis briaunos pjovimas - Galutinis briaunos pjovimas pjūklu - 2 frezavimo agregatai briaunos viršui/apačiai - 2 ciklinės – klijų pertekliui pašalinti - 2 poliravimo agregatai - Didžiausias ruošinio storis – 45 mm - Mažiausias ruošinio plotis – 50 mm - Mažiausias ruošinio ilgis – 150 mm - Nusiurbimo angos skersmuo – 60 mm - Suspausto oro slėgis – 6 barai Bendri matmenys: - Ilgis 2800 mm - Plotis 1220 mm - Aukštis 1650 mm - Svoris 660 kg Kur galite apžiūrėti mūsų įrenginius? JBS MEDIENOS APDIRBIMO TECHNIKA WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKOJE APSKRITIS Fsdsy Iv R Uopfx Af Aspg

Būklė: labai geros būklės (naudotas), SCM S520 storio matuoklė Fjdpfey N Uc Eex Af Aopg Didžiausias obliavimo plotis: 520 mm Didžiausias obliavimo aukštis: 250 mm 4 klasikiniai peiliai, vadinami „ant pleištų“ Elektrinis pakėlimas 4 padavimo greičiai 2 reguliuojami volai stalo paviršiuje Elektroninis aukščio rodmuo 150 mm ištraukimo pajungimas Variklis 5,5 kW Tylus veikimas, staklės labai geros būklės.

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 14 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 118 mm, pjovimo plotis (maks.): 1 270 mm, pjūklo disko skersmuo: 350 mm, pjūklo disko nuolydžio reguliavimas: 45 °, aukščio reguliavimo tipas: mechaninis, pjūklų disko skylė: 30 mm, pavaros tipas: elektrinis, bendras ilgis: 3 550 mm, bendras plotis: 2 200 mm, bendras aukštis: 1 600 mm, bendras svoris: 630 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, pjūklo disko apsauga, – itališkos gamybos – pagaminimo metai: 2006 – DTR dokumentacija ir CE sertifikatas TECHNINIAI PARAMETRAI: – vežimo ilgis: 3200 mm – pjovimo plotis dešinėje: 1270 mm – disko skersmuo: min. 250 mm, maks. 350 mm – priešpjovio skersmuo: 120 mm – pagrindinis variklis: 5,5 kW – priešpjovio variklis: 0,55 kW – stabdys – pagrindinio disko veleno skersmuo: 30 mm – priešpjovio veleno skersmuo: 20 mm – pjovimo aukščio reguliavimas – pjovimo kampo reguliavimas: 0° – 45° – maks. pjovimo aukštis 90° kampu (350 mm diskas): ~118 mm – maks. pjovimo aukštis 45° kampu (350 mm diskas): ~84 mm – dvi fiksavimo atatrankos Fsdpjy Ax Niefx Af Ajpg – judama apsauga – vežimo matmenys (ilg./plot.): 3200 x 315 mm – atvamzdžio skersmuo: 80 ir 120 mm – gabaritai (ilg./plot./aukšt.): 355 / 220 / 170 cm – svoris: ~630 kg

Būklė: labai geros būklės (naudotas), Kraštų klijavimo staklės SCM K360 Skysčiai Precutteriai frezos, Klijų tepimas voleliu, Keičiamas bakelis Fpsdpfxjy Nlgzo Af Aeg Komplekte antras bakelis Pneumatinė pradinė giljotina, Galutinio pjovimo pjūklai, pneumatiškai reguliuojami Frezavimo agregatas aukštyn-žemyn R1-R2, pneumatinis nustatymas Kampinių briaunų apdirbimo agregatas, pneumatinis reguliavimas Profilinė ciklina Valomieji skysčiai Plokščioji ciklina, Poliravimo įrenginys, Maks. ruošinio aukštis: 60 mm Maks. kraštų storis ritinyje: 3 mm Padavimas: 11 m/min Originali rida: 135.000 m Labai gera būklė Galimybė tikrinti ir išbandyti vietoje

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, bendras svoris: 452 kg, Surface planer-thicknesser, TECNOMAX FS 41 elite jointer – after technical inspection, ready for operation Specification: • Condition – used, after comprehensive inspection • Manufacturer – TECNOMAX (SCM Group) • Model – FS 41 elite • Working width – 410 mm • Thicknessing working height – 240 mm • Table length – 200 cm • Noise reduction fingers at the cutterblock • 3.0 kW motor • 3-knife cutterblock for traditional knives • Extraction port diameter – 120 mm • 2 feed speeds (6 and 12 m/min) • Original paintwork • Weight – 452 kg • Year of manufacture – 2009 Fodsy Inuxspfx Af Aopg • Overall dimensions – 220 x 90 x 100 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to switch on and inspect the machine on site • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport via the MDD fleet, courier companies or external carriers • We offer financial support in the form of lease or lease loan

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, working width 230 mm working height 120 mm 6 heads head configuration: bottom/right/left/top/bottom/universal spindle speed 6000 rpm Fsdpfx Afjy N N T Ee Aopg spindle adjustment on two axes pneumatic pressure rollersinfinitely variable feed speed adjustment year of manufacture 2000

Būklė: labai geros būklės (naudotas), working width 520 mm 4-knife cutterblock star/delta start mechanical table adjustment variable feed speed Fpedjy N N I Aspfx Af Ajg cutterblock speed 4500 rpm table-integrated feed roller

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Bottom, right, left, top, universal Motor power: 4 kW, 5.5 kW, 4 kW, universal 4 kW Spindle speed: 6000 rpm Table lubrication Electric height adjustment (up/down) Two feed speeds Year: 1999 Fodpfsy N Rb Rox Af Aepg Weight: 2320 kg 400 V

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC-Tischfräsmaschine ERGON CNC-Maschine SCM Typ: Ergon Seriennummer: AA1/012348 Baujahr: 2001 CNC-Maschine SCM ERGON Steuerung: NUM PC, Programmierung: CAD ALPHA CAM 2 Arbeitstische – simultaner oder Einzeln-Betrieb möglich 2 Werkzeugmagazine/Wechselstationen mit je 12 Plätzen 2 Elektrospindeln, je 11 kW, 18.000 U/min, können paarweise (DUOSET) unabhängig voneinander in Z-Richtung arbeiten Werkzeugaufnahme: HSK 63 1 Bohrkopf mit 18 Spindeln Werkzeugwechselmagazine: 2x12 Plätze Winkelgetriebekopf Handbuch/Bedienungsanleitung, Pneumatik- und Schaltpläne in mehreren Sprachen auf CD Technische Daten: Fpsdpfsn Hx Tlex Af Asg Steuerung/Programm: NUM-PC, CAD Alpha CAM Verfahrwege X-Y-Z: 4500 – 1740 – 300 mm Arbeitstische: 2 Stück je 2160 x 1520 mm Elektrospindeln/Router DUOSET 2x11 kW, 18.000 U/min, können im Paarbetrieb arbeiten Vertikalhub von 2 unabhängigen Z-Achsen Synchron-elektrischer Schwebekopf 2 Karussell-Werkzeugwechsler mit je 12 HSK63 Werkzeugplätzen Vektorachse Vakuumpumpe 90 m³/h F18-Bohrkopf: 18 Spindeln Anschlusswert: 400 Volt, 50 Hz, 3-phasig Aufstellmaße ca.: 7460 x 5500 mm (L x B) Gewicht: 7.000 kg Lager-Nr.: 2001650BXA Preis: 200.000 SEK

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Keturių pusių obliavimo staklės SCM Superset XL Darbo plotis: 15-230 mm Darbo aukštis: 6-120 mm Velenų skaičius: 5 Velenų išdėstymas: Apatinis Dešinys Fpedpfxoy E S R Ej Af Aog Kairys Viršutinis Apatinis Velenų apsisukimų greitis: 6000 aps./min Pneumatiniai prispaudėjai Prietraukimo greitis reguliuojamas variatoriumi: 5-25 m/min Pavara per kardano velenus CE sertifikatas

Būklė: naudotas, SCM obliavimo staklės, itališka gamyba 4 tradiciniai peiliai, tvirtinami pleištais Šukos ant stalo plotis 410 mm stalo ilgis 2600 mm Reguliuojamas kampinis liniuotė Stabdys Prižiūrėta mašina, tylus darbas Fsdsy Ifglepfx Af Aspg

Būklė: naudotas, • Keturių pusių obliavimo staklės su klasikiniu velenėliu • Darbo plotis iki 240 mm Fsdpfoxxkt Aex Af Ajpg • Darbo aukštis iki 120 mm • Mažiausias darbo aukštis 6 mm • Veleno greitis: 6000 aps./min • Begalinis tiekimas 5–25 m/min (pasirinktinai iki 36 m/min) • Ilgas ašinis poslinkis prie vertikalios velenėlio, iki 80 mm • Visi įrankių velenai su nepriklausomais varikliais

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Atnaujinta keturpusiai obliavimo staklės iš SCM GROUP. Paprasta ir tvirta konstrukcija užtikrina ilgalaikį įrenginio tarnavimo laiką ir našumą. Tvirta plieninė staklių bazė garantuoja tikslų ir aukštos kokybės apdirbimą. Įrenginys skirtas didesnėms gamybos įmonėms profilių gamybai (tiesių bei formuotų profilių). 5 darbiniai velenai: apatinis, dešinysis, kairysis, viršutinis, apatinis Automatinis centrinis darbinio stalo tepimas Medžiagos padavimo greičio variatorius Patikrintas įrenginys su pusės metų garantija Puiki techninė būklė Su įrankiais komplekte Fsdovxtzaopfx Af Aopg Techniniai duomenys: Darbinis plotis (galutinio profilio storis) min/maks: 25 / 230 mm Darbinis aukštis (galutinio profilio storis) min/maks: 6 / 120 mm Stalo ilgis: 2000 mm 1-asis apatinis velenas: apie 5 kW Dešinysis ir kairysis velenai: apie 7 kW 4-asis viršutinis velenas: apie 7 kW 5-asis apatinis velenas: apie 5 kW Įrankių apsisukimų skaičius: 6000 aps./min Nuolatinis padavimo greitis: 4 - 24 m/min Medžiagos padavimo variklis: 4 kW Svoris: apie 3000 kg

Būklė: naudotas, Naudota mašina Obliavimas: Darbinis plotis 500 mm Bendras stalo ilgis 2200 mm Velenas su 4 peiliais, su juostiniais oblių peiliais Variklis 4 kW Fpedpfx Afoy Rvldj Aog Storio obliavimas: Min. darbinis aukštis 3 mm Maks. darbinis aukštis 235 mm Didžiausias pjovimo gylis 8 mm Aukščio nustatymo skaitmeninis rodmuo su dešimtainio tikslumo ekranu Padavimo greitis 7,5/15 m/min Prieinamumas: trumpu laikotarpiu Sandėlio vieta: Flörsheim

Būklė: labai geros būklės (naudotas), SCM obliavimo staklės, 30 cm, Obliavimo plotis: 30 cm, Stalų ilgis: 210 cm, 3 tradiciniai peiliai, tvirtinami klinų sistema, Variklis: 3 AG, 380 V, Ištraukimo anga: 130 mm, Stalo šukos slopinančios veleno garsą, Fpjdpjy Hp Iwefx Af Aeg Reguliuojama kampinė tvorelė, Labai gera būklė.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008350, Sumontuoto briaunos tipas: plona briauna, stora briauna, masyvi mediena Fedpfx Afsx A Tgys Ajpg Klijavimo sistema: PUR Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Maksimalus padavimo greitis: 20 m/min Maksimalus plokštės storis: 60 mm Darbiniai agregatai: 7 vnt

Būklė: naudotas, Gamybos metai: 2023, Ex demo machine Garbsen CNC-CONTROLLED MACHINING CENTER Morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with an extensive range of tools for milling and drilling to handle any requirement in the woodworking sector. Highly efficient – features drilling spindles with 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free hours. Fully and extensively equipped – the vacuum pods can be individually configured via the TV FLEX worktable, allowing the machine to be adapted flexibly to your needs. User-friendly and intuitive programming thanks to integrated MAESTRO CAD-CAM CNC software. Easy to operate: the lowered machine base ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and the PRO SPACE version requires no additional structural safety measures. Supporting structure The main frame consists of an exceptionally strong, monolithic steel base, heavily ribbed and extremely robust. Its especially wide support surface is specifically designed to provide the machine with outstanding stability, ensuring continuous precision under all working conditions. There is no need for the machine to be anchored to the floor. The base forms a large, solid foundation for the moving gantry: the operating unit is equipped with a balanced, stable and resistant support that withstands the highest loads, ensuring superior quality and greater accuracy. The moving gantry consists of a single solid piece bolted to the base and moves along prismatic guides with recirculating ball carriages of the highest quality. The machining unit is mounted on it and also moves along the Y and Z axes on prismatic guides with recirculating ball carriages. The movement of the lower moving unit (X-axis) and the machining unit along the traverse of the moving unit (Y-axis) is driven by a helical rack and pinion drive; this provides greater tooth-on-tooth thrust for higher acceleration and increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, delivering perfect balance under dynamic loads, and withstanding high acceleration and deceleration. The main milling unit is directly coupled with the Z-axis carriage, allowing for very high quality finishing with practically zero vibration. X-Y-Z axis movement is handled by brushless motors driven by static inverters. These provide: - Reduced cycle times thanks to improved acceleration - Improved positioning accuracy thanks to high-resolution encoders - Elimination of set-up operations when powering on the machine thanks to absolute encoders - No general maintenance on the drive system as the brushless system uses no brushes. The management of axis movement and general machine operations... Fsdpfx Ajytrgzsf Aopg

Būklė: naujas, Electric Heated Platen Press Manufacturer: SCM Model: GS 6/90 30-13 Offer type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of heating platens: 2 pcs Max. temperature of heating platens: 120°C Recommended working temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Press cylinder diameter: 70 mm Number of daylight openings: 1 pc Daylight opening approx.: 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminum sandwich platens by ELKOM - Germany. Continuously adjustable up to 120°C, up to 150°C on request. Thermal insulation between platens and press frame. The heating platens are mounted with special brackets to allow necessary thermal expansion. Hydraulics: Compact hydraulic pump by HAWE Germany, integrated in the press frame. 2-stage design for closing and pressure build-up phases. Hydraulic cylinders made from high-grade, tempered, and ground steel with large diameters. Press Frame: The press frame is constructed from heavy-duty, torsion-resistant, stress-relieved welded steel. Presses of the GS series can be loaded from all four sides. Press tables are welded from HEA profiles. Precision machining of all assemblies is performed on state-of-the-art CNC machining centers. Uniform and precise movement of the press table is ensured by rack-and-pinion drives and self-lubricating guides at two corners of the press frame. Control System: Side-mounted control panel with SIEMENS 7'' color touchscreen. SCM's proprietary software enables simple and intuitive control of the press. Fedpfx Ajfh Tmmef Aopg The following parameters can be programmed, retrieved, and changed: - Automatic calculation of the maximum permissible hydraulic pressing force based on the workpiece size. - Ability to store up to 100 programs (temperature, specific pressure, pressing time, platen size). - Direct setting of hydraulic pressure - Option for internet connectivity for remote service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault messages displayed on the screen. OPTIONAL: - Electronic flatness control (misplacement monitoring) - MYLAR film for protection and easy cleaning of electric platens - Surcharge for pressing force 120 t - ELKOM platens with gold anodized finish

Būklė: naujas, DMC SD 90 RCS 135 C-Plus version Technical Specifications Useful working width: 1350 mm Min./max. working height (with fixed table): 4 – 200 mm Abrasive belt dimensions: 1,370 x 2,620 mm Feed speed: 3.5–18 m/min Working Units: - “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st position: “RA” diagonally ribbed steel contact roller D=250 mm • 2nd position: COMBI unit with rubber-coated sanding roller D=175 mm, 65 Sh - Floating pressure shoe in 1st position, pneumatically adjustable - Two grooved rubber-coated pressure rollers in 2nd and 3rd positions - Oscillating air jet cleaning device for 1st and 2nd unit - Workpiece cleaning unit with rotating air nozzles Power: • 1st unit motor: 18.5 kW • 2nd motor with inverter: 15 kW Table: - Fixed table, working height 900 mm - Roller table at infeed for long workpieces - Roller table at outfeed for long workpieces - Perforated table and conveyor belt 50 Sh - Vacuum table with 4 kW electric fan integrated in the machine frame Foded E Ixzopfx Af Aopg - Stepless conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: - Electronic programming unit "Pro-Sand" - Touch-screen with 10.4" display - Door with inspection window on setup side for machines with two working units - LED interior lighting Note for used machines: - Technical data subject to errors and prior sale. - Prices quoted are ex-works, loaded free on truck. - The machines have been cleaned and function tested. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our site. - Special agreements are valid only if made in writing. (We will respond to inquiries only if you provide your address and telephone number!)

Būklė: naujas, Worktable dimensions: 2500 x 780 mm Spindle diameter: 30 mm Spindle swivel range: +/- 45.50° Spindle clamping length: 140 mm Max. tool diameter under table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Motor power (electro spindle): 7.50 kW Electro spindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with “Easy Touch 7” electronic control “Flex” milling fence with automatic setting via electronic control Right- / left-hand spindle rotation Extendable front table support INCLUDES OPTIONS: - “Fast” table insert with automatic adjustment via “Easy” control - “LL” version with 2 cast iron table extensions up to 2500 mm Notice for used machines: • Technical details are subject to error and prior sale. • Prices quoted are ex works – loading included! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claim. Buyers are free to inspect the machines on site. • Special agreements are only valid in written form. Fedpfxjd Etkho Af Aopg (Inquiries will be answered only with your address and telephone number!)

Būklė: beveik kaip naujas (parodų įrenginys), pneumatic single-head boring machine with 21 spindles Fpjdpfx Afod Supgj Aog MAGGI Model: Boring System 21 STANDARD EQUIPMENT: Aluminium fence with 2 stops (1,500 mm each on right and left) No. 5 quick-change drill chucks No. 2 patented safety clamping cylinders Connection for extraction unit in accordance with EU standards KEY FEATURES: Worktable made of cast iron Boring head made of aluminium Patented helical system for fine adjustment of drilling depth Pneumatic lowering of the boring head with locking at any position between 0° - 90° Extendable cast iron side fences with millimetre adjustment, scale with magnifier Drilling height adjustment via counter with decimal display Fixed stops at 37 mm for hinge boring The machine is built according to CE standards. TECHNICAL DATA: Drill spindles (left red/right black) 21 pcs (10/11) Distance between drill spindles 32 mm Working width 640 mm Max. drilling depth 65 mm Clamping cylinders 2 pcs Max. workpiece size 900 x 3000 x 60 mm Max. workpiece height 65 mm Number of motors 1 pc Motor power 1.5 kW, 400 V, 50 Hz Motor speed 2800 rpm Operating pressure 6-8 bar Air consumption per cycle 10 l/cycle Extraction port diameter 80 mm Worktable height 860 mm Overall dimensions approx. L x W x H 1030 x 1030 x 1285 mm Weight approx. 260 kg

Būklė: naujas, Bandsaw in compliance with European safety regulations, complete with: - Reinforced tilting grey cast iron table - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion mechanism - Blade tension indicator - Precision upper and lower blade guides - Cleaning brush on the lower flywheel - Stable aluminium fences - Maximum saw blade width: 16 mm Fpsdpfx Afedibw Ao Aeg - Extraction port mounted under the table, attached to the machine frame - Microsafety switches on the machine doors Table dimensions: 600 x 520 mm Table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./max. blade length: 3690 / 3742 mm Min./max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Būklė: naujas, Equipment: Height adjustment of the brush units via handwheel with digital readout Brush diameter: 200 mm Machine in standard configuration, CE compliant Technical Specifications: Working width: 600 mm Max. working height: 300 mm Extraction connection diameter: 2 x 140 mm Feed motor power: 0.37 kW Feed speed, variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (option: 5.5 kW) Machine weight: approx. 750 kg Further technical details: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note on used machines: • Errors in technical details and intermediate sale reserved. • Listed prices are ex works, loaded free of charge at location! • The machines have been cleaned and function-tested. • All machines are sold as seen without any claim to warranty. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. Fpjdpfx Afedd Hi Ee Aeg (We only respond to inquiries containing your address & phone number!)

Būklė: naujas, Clean air extraction unit / Dust extractor Tested for dust class H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Designed for industrial/commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle easily reversible from left to right, allowing flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled, ready for immediate use All models are mobile Filter material made of polyester fleece, aluminium-coated for extended service life Fpjdpfx Aor A Eq Rjf Aeg Filters are antistatic as standard, tested and approved to Category M-BIA The fan is positioned downstream of the filter Extraction motor efficiency class: IE3 Rated air flow: 1,448 m³/h Rated negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter extraction nozzle (inlet): 160 mm Filter area: 9.21 m² Residual dust content: < 0.1 mg/m³ Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a wiper frame

Būklė: naujas, Gamybos metai: 2023, Robust cast iron and steel construction Milling spindle tiltable backwards from 0° to -45° Reversible spindle rotation (right/left) Large dimension cast iron milling unit mounted directly to the table Solid and precise cast iron table Standard arc milling safety hood Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily use 10-year SCM warranty on wear of the guide rails Milling spindle mounted high up with precision ball bearings for minimal bearing load and maximum service life Fpodpfx Ajiknp Rsf Aog Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction port diameter 2 x 120 mm Working table (L x W): 1000 x 435 mm Table height: 900 mm Sliding table length: 1000 mm Sliding table width: 270 mm Main drive motor power: 5.0 kW, 400 V, 50 Hz Milling spindle tilt: 0 to -45° Usable spindle length: 100 mm Maximum projection above table: 130 mm Spindle speeds: 3500/7000/10000 rpm Spindle diameter: 30 mm Maximum lowerable tool diameter: 180 mm