Scm R pirkti naudotą (579)

Būklė: naujas, - NEW - GENERAL FEATURES: Machine frame and work table * Steel structure with electric control cabinet at the front of the machine * Introduction of sanding belts from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with protection class IP 54 Iedpfxovwfrno Agfshw Emergency and safety devices * Safety microswitch for thickness overrun * Automatic brake for immediate stopping of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom switch at the workpiece infeed and outfeed * Lockable main switch * Automatic emergency machine shutdown in cases of: - sanding belt breakage - sanding belt not tensioned - protection against lateral wandering of sanding belt - lack of compressed air - main motor overload Note: The standard version with 400 Volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400 Volt power supply is without a neutral conductor, a single-phase transformer from the price list must be ordered as well. The same transformer must also be ordered with a machine having a voltage higher than 400 Volts, regardless of whether a neutral conductor is present or not. Machines with 220 or 230 Volts (50 or 60 Hz) are available at an extra cost (see price list). BASE MACHINE STANDARD EQUIPMENT - R140/85 rubber-coated calibrating roller, diameter 140 mm 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for main motor to indicate current consumption - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of worktable - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering Working width mm: 1,100 Min./max. working height mm: 4 – 170 Sanding belt width mm: 1,115 Sanding belt length mm: 2,150 Main motor power kW (HP): 11 (15) Gear motor kW (HP): 0.45/0.8 (0.6/1.1) Feed speed m/min: 4.5/9 Comprises: 10.90.87 European safety regulations (mark C.E.) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10" operating panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Būklė: naudotas, mašinos/transporto priemonės numeris: 007981, Taikomo krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: EVA Sujungimo frezavimas: taip Ihedpfsw Ic Tzex Agfew Daugiafunkcis įrenginys: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt

Būklė: naudotas, mašinos/transporto priemonės numeris: 008116, Maks. apdirbimo aukštis: 120 mm Maks. padavimo greitis: 25 m/min Darbo velenų skaičius: 6 Ihodpfjw Iddzsx Agfew

Būklė: naudotas, mašinos/transporto priemonės numeris: 008319, Darbo sritis X ašis: 6380 mm Darbo sritis Y ašis: 1380 mm Darbinis paviršius: Su vakuuminiais konsoliniais atramos Ihodpfx Agex A Tc Isfjw Pagrindinio veleno galia: 11 kW Valdomų ašių skaičius: 5 ašys Įrankių vietų skaičius: 32

Būklė: naudotas, mašinos/transporto priemonės numeris: 007983, Pozicija 1: Vienpusė briaunų klijavimo staklės SCM-STEFANI KDR Pozicija 2: Plokščių grąžinimo įrenginys SCM-STEFANI KDR Ihjdpfx Aewqndlegfow

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 970 mm, Y ašies eiga: 1 480 mm, Z ašies eigos atstumas: 330 mm, stalo ilgis: 2 970 mm, stalo plotis: 960 mm, valdiklio modelis: XILOG Plus, ašies variklio galia: 11 W, greitasis eiga Z ašyje: 25 m/min, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, SCM apdirbimo centras, RECORD 110 modelis su pilnu stalu. Darbinė sritis: 2970 x 1480 x 3302 mm. Frezavimo velenas 11 kW, įrankių tvirtinimas HSK F63, įrankių magazinas su 8 vietomis, vakuuminis siurblys su aušinimu. Tiksli techninė specifikacija yra priedėlyje kaip PDF failas. Ihedpfx Agex Ttlmsfow

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 4-side planer with 6 spindles, reconditioned in 2025, zero operating hours after overhaul, manufacturer SCM, Superset model. This professional industrial equipment delivers high-precision wood processing and is ideal for workshops or factories seeking superior performance and long-term reliability in solid wood machining. The machine represents a modern technological solution, originally manufactured in 2003 by renowned Italian producer SCM, brought up to current standards through a thorough reconditioning with zero hours of operation since the revision. Quality and operational safety are guaranteed, similar to a new machine. Main technical specifications: - Max working width: 240 mm (adjustable from 15 mm) - Max working height: 160 mm (adjustable from 10 mm) - 6 independent processing spindles, each with its own motor and electronic brake - First lower horizontal spindle: 5.5 kW, Ø 40 mm, 8300 rpm - Right vertical spindle: 5.5 kW, Ø 40 mm, 170 mm length, 8300 rpm - Left vertical spindle: 5.5 kW, Ø 40 mm, 170 mm length, 8300 rpm - Upper horizontal spindle: 11 kW, Ø 40 mm, 170 mm length, 8300 rpm - Second upper horizontal spindle: 13.8 kW with inverter, Ø 40 mm, 170 mm length, 10,000 rpm - Second lower horizontal spindle: 5.5 kW, Ø 40 mm, 240 mm length, 8300 rpm Iedpfx Aew Emlwsgfshw Feed system: - Cardan shaft transmission, each unit fitted with its own feed roller and universal joint - 4 kW feed motor with electronic brake - Continuously variable feed speed with frequency inverter: 6–30 m/min - Modernized electrical control cabinet, advanced safety systems, and improved ergonomics for easy operation and maintenance. Key benefits: - High precision and versatility in cutting, planing, and profiling solid wood, regardless of complexity - High reliability due to complete overhaul and top-quality spare parts - Optimized cost compared to new machines, with no compromise on performance - 5-year leasing options available for flexible investment management Recommended applications: - Production of cladding, solid parquet, beams, battens, boards, decorative profiles, and other solid wood products - Carpentry workshops and plants, door/window manufacturers, furniture production, industrial finished lumber manufacturing

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, working width 230 mm working height 120 mm 6 heads head configuration: bottom/right/left/top/bottom/universal spindle speed 6000 rpm Ijdpfeqffa Nex Agfohw spindle adjustment on two axes pneumatic pressure rollersinfinitely variable feed speed adjustment year of manufacture 2000

Būklė: beveik kaip naujas (naudotas), darbinis plotis 630 mm Ihodpfx Agjxztfysfjw sklandus padavimo reguliavimas 4 peilių velenas maksimali ruošinio aukštis 240 mm elektrinis aukščio reguliavimas variklis 7,5 kW žvaigždės/trikampio paleidimas maitinimas 380V

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 3 200 mm, ruošinio plotis (maks.): 200 mm, ruošinio aukštis (maks.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Working table height during profiling: 850 mm Feed roller diameter: 100 mm Axle spacing of feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Tenoning Milling Unit High-performance spindle with upper bearing: diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis run below working table: 575 mm Profile Milling Unit Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool stations: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Ihjdjxx Un Repfx Agfew Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Būklė: naujas, mašinos/transporto priemonės numeris: 10L0354745A, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 410 mm, TERSA cutter block for SCM surface planer F410 • Planer knife width: 410 mm • Including ball bearings on both sides • Without planer knives • SCM article no.: 10L0354745A The cutter block is new and has never been installed. Only storage marks may be present. Ihsdpfxevftv Re Agfjw You will receive an invoice with VAT shown separately. Payment: Prepayment by bank transfer – NO PAYPAL!

Būklė: labai geros būklės (naudotas), SCM Praktika in excellent condition Ihsdpjt Hkq Rsfx Agfjw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Lentynos ilgis: 3000 mm Ijdpfxow Nqnve Agfjhw Lentynos plotis: 1300 mm 6 hidrauliniai stūmokliai Stūmoklių skersmuo: 70 mm Avarinis išjungiklis – avarinis laidas Elektrinis alyvos šildytuvas Svoris: 3300 kg Naujos aliuminio lentynų dangos Pagaminimo metai: 2013

Būklė: beveik kaip naujas (naudotas), cutting length 4.5 m Ihjdpfxjwtygqj Agfew maximum working height 60 mm maximum saw blade diameter 350 mm scoring unit pneumatic pressure beam main motor power 7.5 kW power supply 380 V

Būklė: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Ijdpfxocr S Ecj Agfjhw Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Būklė: naujas, Gamybos metai: 2025, Woodworking Machines / Spindle Moulder Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table Large-scale milling unit made of cast iron, tiltable up to -45° to the rear Four milling speeds from 3,500 to 10,000 rpm Right- and left-hand rotation as standard Height and tilt display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling protection hood included Made in Italy Dimensions and Weights Length (product): approx. 1200 mm Width/Depth (product): approx. 2000 mm Weight (net): approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1200 mm Work table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required length: 2800 mm Required width/depth: 2910 mm Explanation required space: The dimensions take into account maximum travel or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Ijdpfx Aji Dphtegfohw Explanation working area: Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speed(s): 3500/6000/8000/10000 rpm Spindle speed display: LED on the machine front Spindle shaft diameter: 30 mm Max. Milling Tool Diameter Max. tool diameter: 240 mm Max. lowerable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning cutter diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table: ✔ Spindle fence: Heavy‑duty professional version with hold-down, safety guard, and aluminum fence cheeks Telescopic mitre fence: with two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Sliding table handle: ✔ Spindle height adjustment: manual Spindle tilt adjustment: manual Control: manual height and tilt adjustment of the milling unit Control element position: on the machine body Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Motorized thickness table lift with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-threaded spindles for maximum stability and precision Four feed speeds Optional: Two rollers in the thickness table Standard noise and chip protection curtains at the infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa cutterhead Knife change in seconds When the machine starts, centrifugal force automatically tensions the knives – self-locking The knife projection is set automatically without the need for setting gauges Work table The work table is mounted on four large trapezoidal-threaded spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is perfectly maintained even without locking Helically toothed steel infeed rollers ensure constant and uniform wood feed Second, rubber-coated feed roller at outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and weight Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Isdpsff Efaofx Agfshw Extraction connection Extraction port diameter thicknessing: 150 mm Drive power Main motor: 9 kW Installation information Space requirement length: 1305 mm Space requirement width/depth: 1080 mm Space requirement height: 1197 mm Explanation space requirement: Dimensions include maximum traversing paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation working area: Please add the stated dimensions to the space requirement in order to get the recommended free setup area for the machine. Thicknessing Thickness table length: 630 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 300 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connecting voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: In stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Powered thickness table lift with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thickness table Standard noise and chip protection curtain at workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter change in seconds When the machine starts, the cutters are tensioned automatically by centrifugal force—self-locking The knife protrusion adjusts automatically without the use of setting gauges Work Table The work table is mounted on four large trapezoidal threaded spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfect even without locking Helically geared steel infeed rollers for constant and even wood feed Second, rubberized feed roller at the outfeed Heavy-duty anti-kickback fingers prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter, thickness 150 mm Drive Power Main motor 7.5 kW Installation Information Required space length 1170 mm Required space width/depth 1003 mm Required space height 1197 mm Installation note: Dimensions account for maximum stroke or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Note on working area: Please add the specified dimensions to the required space in order to obtain the recommended free installation area for the machine. Thickness Thickness table length 520 mm Thickness table width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Maximum depth of cut 8 mm Electrical Data Connection voltage 400 V Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs. Isdod Hx E Iepfx Agfshw Speed 4500 rpm Maximum planing width 520 mm Feed Feed speed 5/8/12/18 m/min

Būklė: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Iedpecnxayjfx Agfshw Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Būklė: naujas, Gamybos metai: 2026, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Ihjdpfxocnxa So Agfow Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Būklė: naujas, Gamybos metai: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Joiner (Planing Table) Infeed table length: 1034 mm Maximum cutting depth: 5 mm Dust extraction connection Thicknesser extraction port diameter: 2 x 120 mm Thicknesser Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 5 mm Electrical Data Drive motor power: 5 kW Rated voltage: 400 V Network frequency: 50 Hz Cutterblock Type: TERSA Number of blades: 4 pcs Speed: 5,200 rpm Maximum planing width: 410 mm Ihedpfx Aohkz E Togfow Feed Feed speed: 6 / 12 m/min The TERSA cutter system allows for exceptionally quiet operation. Helically grooved steel infeed roller ensures consistent and even material feed. Material feed with two selectable speeds. Digital height readout for thickness table. The 2,000 mm long jointer tables make it easy to plane large workpieces. Tables are made of cast iron, stress-relieved and annealed, ensuring stability and long-term flatness. Heavy-duty, large aluminium jointer fence with round bar guide (1200 x 160 mm). Thickness table adjustment via handwheel with numeric height display. The high machine weight delivers maximum precision and extremely smooth running. Powerful industrial-grade motor. Robust steel/cast iron construction. Equipment Details Jointer Fence Stable, large jointer fence made from aluminium (1200 x 160 mm), with precise round bar guide. Extraction Hose Connection The extraction ports for both jointer and thicknesser face the same direction during operation. This allows the extraction hose to be connected from the same side for both planing operations, requiring no hose routing around the machine. Planer Unit Helically-grooved steel infeed rollers assure a constant and uniform material feed. Heavy-duty anti-kickback fingers prevent workpiece kickback. Four-knife cutterblock provides optimal planing results. Chain Drive Robust chain drive design. Drive sprockets made of steel. Massive cast iron bearing block. Two Feed Speeds Standard with two feed rates, easily selectable from the operator’s panel. Material Feed Helically-grooved steel infeed rollers provide consistent, mark-free material feed. Multiple teeth engage simultaneously for powerful feed force. Wear-free compared to rubber infeed rollers. Thickness Table Adjustment Adjustment via handwheel, with numeric digital height display, accurate to 0.1 mm. Tersa Cutterblock No setting or screwing required—blade changes in seconds, self-locking, exceptionally quiet, perfect planing results. Location: Ex-stock 54634 Bitburg - immediately available - Subject to prior sale.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulding Machine With tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and grey cast iron construction Large support surface and precise cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°–45° Rip fence with fine adjustment Stable saw unit and large double-trunnion spindle moulder aggregate ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3,500 to 10,000 rpm Spindle with reversible rotation direction Standard curved milling guard Two 5.0 kW motors with high power reserves Grey Cast Iron Spindle Moulder Unit Top-mounted on both sides Top precision ball bearings Close to pivot point Four optimally graded spindle speeds, allowing for trimming of workpieces Powerful Motors Industrial motor, 100% duty cycle suitable for continuous operation (full load) Scope of delivery: Curved milling guard Anodized aluminium format sliding table Ihedscnwydjpfx Agfjw Aluminium fence jaws Folding stops Technical Data Cast iron working table dimensions: 1112 x 430 mm Cutting length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscutting width: 2660 mm Saw blade tilting: 90°–45° Cutting width: 900 mm Speed: 4000 rpm Spindle moulder: – Spindle tilt: 90°–45° Usable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 180 mm Speeds: 3,500/7,000/10,000 rpm General: – Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Location: Ex stock 54634 Bitburg – Available immediately –

Būklė: naujas, Gamybos metai: 2026, LAB 300 PLUS F 16 TERSA – Universal Combination Machine with Aluminium Sliding Table and Multiple Spindle Speeds For sawing, milling, surface and thickness planing, and optional slot mortising - Torsion-resistant steel and cast iron construction - Machine table made of hardened and ground cast iron - Smooth-running anodised aluminium sliding table, with a 10-year warranty on guideways - Large squaring frame with extendable aluminium telescopic fence and flip stops - Combination saw jointing fence with 45° quick adjustment - Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard reversible spindle rotation (right/left) - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling protection hood - Tersa cutterblock - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops - Eccentric clamping arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90°/45°: 100/79 mm Max. cross-cut width left of saw blade: 1660 mm Cutting width at parallel fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilting: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Ihjdjcnxa Njpfx Agfow Table size: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter (retractable): 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speed: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power (400 V / 50 Hz / S6 - 40%): 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Sliding Table with Ball Bearing System - Equipped with a proven ball contact system, tested millions of times - Permanently smooth running due to hardened and ground guides - Not sensitive to dust and dirt, thanks to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on wear of carbide guideways Extraction Hose Connection The extraction ports on both the surface planer (1) and thickness planer (2) face the same direction. The extraction hose can therefore be connected to the machine from the same side for both modes, eliminating the need for the hose to reach around the machine. Planer Units - Helical-toothed steel infeed rollers ensure constant, even wood feed - Heavy-duty anti-kickback devices prevent workpiece kickback - 3-knife cutterblock ensures optimal surface finish

Būklė: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Ihodpfjff Hdpjx Agfew Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Required space length: 2250 mm Required space width/depth: 1440 mm Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Isdpfx Ajhp Rdlsgfshw Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -