Savo Ruožtu Lentelė pirkti naudotą (210)

Sąlyga: naudotas, Table size 140 x 130 mm Table height 100 mm Max. measuring height 230 mm Max. throat depth 115 mm Column diameter 50 mm Ffedpovimvlsfx Ab Sot Weight approx. 13.5 kg

Gamybos metai: 2021, Sąlyga: naudotas, Volelių plotis: ±60 cm. Ffjdpfsxiw Nxsx Ab Sst Apžiūros juostos ilgis: ±275 cm.

Gamybos metai: 1982, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 391; Lg-Nr. 13100, Technical data: - Load capacity: 2000 kg - Maximum load capacity (horizontal): 3500 kp - Faceplate turning cross: 1750 x 1750 mm - Turning cross extensions - Faceplate tilt via gear motor: 0 – 90° - Rotary motion electrically infinitely variable: 0.2 – 1.5 m/min - Right/left rotation - Welding current transmission: 1200 A - Drive: 400 V Ffodpfx Abjbp Thhs Sst - Table height in horizontal position with base frame: approx. 2070 mm - Table height in horizontal position without base frame: approx. 940 mm - Required floor space: approx. W 1650 x H 1130 / 940 x D 2500 mm - Weight: approx. 2.2 t

Gamybos metai: 1994, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 8084/77/01, Kalibro stalo profilio ekstruzija Ffsdpsxghqhefx Ab Set

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras plotis: 700 mm, bendras ilgis: 1 400 mm, bendras aukštis: 500 mm, bendras svoris: 2 000 kg, reikalingas plotis: 700 mm, vietos reikalavimas ilgis: 1 400 mm, reikalingas aukštis: 850 mm, Attention: only surface plate from CMM dismantling with table frame Ffjdpfx Aevfn Ihsb Sst

Sąlyga: naujas, Gamybos metai: 2025, For separating and sorting by specific weight into light and heavy fractions. Suitable for use with grain, nuts, etc. See PDF for details. Type and size selectable according to product and throughput requirements. With an approximately consistent machine length, working widths of 450 mm, 600 mm, and 900 mm are available. Fsdpsbbr Iiofx Ab Ssft

Gamybos metai: 1990, Sąlyga: naudotas, mašinos/transporto priemonės numeris: xxxx; Lg-Nr. 17250, Technical data: - Load capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Jib arm motorized, rotatable left and right Fjdsdd Ilxspfx Ab Soft - Jib arm manually tiltable - Faceplate motorized, rotatable left and right - Faceplate speed infinitely variable - Faceplate diameter 300 mm - Swiveling control panel with ESAB controls, - Type 6 PTF, year of manufacture 1997 - Space requirements approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7001296, Greiner Caliber stalas Fsdpfjxgdp Hex Ab Soft

Gamybos metai: 2025, Sąlyga: naujas, For separating and sorting by specific weight into light and heavy fractions. Suitable for applications ranging from grain to aluminum/plastic, rubber/textile, up to cable recycling, etc. Type and size selectable depending on product and throughput. With approximately the same machine length, working widths of 450 mm, 600 mm, and 900 mm are available. Fodpfx Abschb Sbj Sjft

Gamybos metai: 1986, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: xxxx; Lg-Nr. 16059, Technical data: - Load capacity in horizontal position: 15,000 kg - Load capacity in vertical position: 10,000 kg - Faceplate diameter: 1,850 mm - Faceplate steplessly tiltable with crane support - Rotation electrically steplessly adjustable - Right and left rotation Ffodpfxjd Nauio Ab Sjt - Drive: 400 V - Foot remote control - Grounding cable - Welding current transmission: 500 A - Table height in horizontal position: 1,850 mm - Required space approx.: W 2,450 x H 1,850 / 2,300 x D 3,000 mm - Weight approx.: 6,000 kg

Sąlyga: naujas, Gamybos metai: 2025, The heavy-duty WS16 bench drill is a general-purpose drilling machine designed for operations such as drilling, reaming, countersinking, and tapping (using special holders for tapping tools). The drill allows for both drilling and tapping with multi-spindle heads. This machine is characterized by high efficiency, precise operation, low noise levels, a wide range of spindle speeds, a centralized control panel for easy operation, and user-friendly handling. Machine Features: - High spindle rigidity - Automatic reverse for tapping operations - Left-hand rotation switch - Headstock, column, table, and base made from top-quality, seasoned cast iron - Spindle and gearbox shafts made from hardened and heat-treated steel - High-power motor - Large spindle travel Fedpfsrif S Rex Ab Ssft - Intuitive control panel - U-type spindle guard with limit switch, CE-compliant - Manually adjustable worktable with 360° rotation and T-slots - Belt drive guard equipped with a safety limit switch - CE certificate - Adjustable keyed drill chuck with Morse taper fitting - Taper drift for removing Morse shank tools Technical Specifications: MAX. DRILLING DIAMETER IN STEEL: 16 mm MAX. TAPPING DIAMETER IN STEEL: M10 COLUMN DIAMETER: 70 mm SPINDLE TRAVEL: 100 mm SPINDLE-TO-COLUMN DISTANCE: 193 mm MAX. SPINDLE-TO-TABLE DISTANCE: 330 mm MAX. SPINDLE-TO-BASE DISTANCE: 613 mm SPINDLE MOUNT: MT2 SPINDLE SPEED RANGE: 480–1875 rpm NUMBER OF SPEEDS: 5 TABLE DIMENSIONS: 265 x 285 mm BASE DIMENSIONS: 360 x 480 mm MACHINE HEIGHT: 1130 mm MOTOR POWER: 1.1 kW SUPPLY VOLTAGE: 400V NET WEIGHT: 131.5 kg DIMENSIONS: 600 x 400 x 1150 mm Optional Equipment: Cooling system

Sąlyga: geras (naudotas), Aluminum Measuring Table with 50 mm Aluminum Plate and Drawer Cabinet Type: Measuring table with aluminum measuring plate Dimensions: 80 cm wide, 75 cm deep, and 95 cm high (2.26 m high with construction) Aluminum plate: 5 cm thick, with threaded holes Drawer cabinet manufacturer: Garant (Hoffmann Group) Ffodpjhvmkijfx Ab Sst Number of drawers: 2 Material: Aluminum Condition: Used Complete plant closure, large selection of warehouse platforms, pallet racking, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools More items—both new and used—can be found in our shop! International shipping costs on request!

Sąlyga: geras (naudotas), Sveiki, Parduodama radialinė gręžimo staklė RF-50/1250. Įrenginys veikiantis, nuolat naudojamas, galima patikrinti. Skelbime nurodyta kaina yra be PVM, prie kurios reikia pridėti PVM mokestį. Ffsdoxykctopfx Ab Sot Įrenginį galima apžiūrėti Starachowicach, Kwiatkowskio g. 13. Telefoninis kontaktas nuo 7:00 iki 16:00.

Sąlyga: naudotas, Table length 600 mm Table width 600 mm Ffodpsd Ihbbsfx Ab Set Table load capacity 0 t Various clamping tables from a Höfler measuring machine! Available individually or as a package.

Gamybos metai: 2010, Sąlyga: geras (naudotas), 2 pcs. aluminum tables for measuring machine Manufacturer: MEUSBURGER Type: BST 5500 Year: 2010 Dimensions: Length 5500 mm, Width 1200 mm, Height 700 mm In good condition. Fjdpfog Uf Ngsx Ab Sjft

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (naudotas),

Sąlyga: naujas, Gamybos metai: 2025, The W16 bench drill is distinguished by its rigid construction and excellent performance while maintaining compact dimensions. It features a tapping function and a swiveling worktable with adjustable height. This machine combines power and precision, which is crucial for a wide range of applications. Machine Description Tapping function Automatic spindle reversing during tapping Manual spindle reversing using a foot lever High spindle rigidity Adjustable drilling/tapping depth stop Belt-driven transmission Worktable with adjustable height, tiltable from -45° (left) to +45° (right), and 360° rotation around the column Base equipped with 14 mm T-slots Belt drive cover equipped with a safety limit switch Vice not included! Technical Data Max. drilling diameter: 16 mm Max. spindle quill travel: 100 mm Spindle taper: MT2 Spindle speeds: 480, 800, 1400, 2440, 4100 rpm Distance spindle axis to column: 193 mm Table dimensions: 200x230 mm Base dimensions: 528x360 mm Max. spindle nose to table distance: 315 mm Max. spindle nose to base distance: 556 mm Ffjdpfx Asrif Iueb Sot Table horizontal tilt range: ±45° Table rotation around column: 360° Motor power: 750 W / 400V Weight: 90 kg Scope of delivery: B18 keyless drill chuck MT2 chuck arbor

Sąlyga: naudotas, Dimensions: 3,000 mm x 1,200 mm Ffedpfx Abjd Hwwue Sot - without stops - without press cylinder

Sąlyga: naujas, Gamybos metai: 2025, The W25 bench drill is a machine that combines both power and precision. It features a robust, rigid construction, high performance, and accuracy. The device is equipped with a swiveling worktable with adjustable height, as well as a tapping function with automatic spindle rotation reversal. Machine description: - Tapping function - Automatic reversal of spindle rotation during tapping - Manual reversal of spindle rotation via foot lever - High spindle rigidity - Setting of required drilling/tapping depth - Drive transmitted by a belt mechanism - Worktable with adjustable height, tilting from -45° (left) to +45° (right), and capable of 360° rotation around the column - Base equipped with 14 mm wide T-slots - Belt drive guard equipped with a safety limit switch Technical specifications: - Max. drilling diameter: 25 mm - Max. spindle quill stroke: 125 mm - Spindle taper: MT3 - Spindle speeds: 290, 420, 740, 1260, 2150 rpm - Distance from spindle axis to column: 240 mm - Column diameter: 100 mm - Table dimensions: 280 x 300 mm - Base dimensions: 590 x 375 mm - Max. distance spindle nose to table: 367 mm - Max. distance spindle nose to base: 630 mm - Table tilting range (horizontal axis): ±45° - Table rotation around column: 360° Ffjdorif I Rspfx Ab Sjt - Quill diameter: 50 mm - Motor power: 1100W / 400V - Dimensions: 800 x 400 x 1100 mm - Weight: 165 kg Included: - B22 keyless drill chuck 5-20 mm - MT2 drill chuck arbor

Sąlyga: naujas, Gamybos metai: 2025, The reinforced construction bench drill WS20 is a general-purpose drilling machine, suitable for operations such as drilling, reaming, countersinking, and tapping (with the use of special holders for tap tools). The drills allow for drilling and tapping with multi-spindle heads. The drill features high efficiency, accuracy of operations, low noise level, a wide range of spindle speeds, a centralized control panel simplifying machine operation, and ease of use. Machine Features SPINDLE AUTOMATIC FEED - High spindle rigidity - Tapping via automatic engagement of reverse rotation - Reverse rotation switch - Headstock, column, worktable, and base all made from top-quality seasoned cast iron - Spindle and gearbox shafts made from hardened and heat-treated steel - High motor power - Large spindle stroke - Clear control panel - U-type spindle guard with CE-compliant limit switch Ffedpfx Aorif T Djb Sjt - Manually raised worktable, 360° rotation, with T-slots - Belt drive cover equipped with safety limit switch - CE certificate - Adjustable drill chuck with key and Morse taper mounting - Drift for Morse taper removal Technical Data MAX. DRILLING DIAMETER IN STEEL: 20 mm MAX. TAPPING DIAMETER IN STEEL: M16 COLUMN DIAMETER: 85 mm SPINDLE STROKE: 135 mm DISTANCE SPINDLE-COLUMN: 260 mm MAX. DISTANCE SPINDLE-TABLE: 366 mm MAX. DISTANCE SPINDLE-BASE: 678 mm SPINDLE MOUNT: MT2 SPINDLE SPEED RANGE: 280-1875 rpm NUMBER OF SPEEDS: 5 TABLE DIMENSIONS: 300 x 320 mm BASE DIMENSIONS: 376 x 566 mm MACHINE HEIGHT: 1245 mm MOTOR POWER: 1.1 kW SUPPLY VOLTAGE: 400V NET WEIGHT: 179 kg DIMENSIONS: 800 x 450 x 1250 mm Optional Equipment: Coolant system

Sąlyga: naujas, Gamybos metai: 2025, The WS20 Heavy-Duty Bench Drill is a general-purpose drilling machine engineered for operations such as drilling, reaming, countersinking, and tapping (when using dedicated tapping tool holders). The drill accommodates both single- and multi-spindle tool holders for drilling and tapping processes. It distinguishes itself with high efficiency, precision, low noise levels, a broad range of spindle speeds, a centralized control panel for user convenience, and ease of operation. Machine Features - High spindle rigidity - Automatic reversal for tapping operations - Left-hand rotation switch - Spindle head, column, table, and column base made from premium, seasoned cast iron - Spindle and gear shafts manufactured from hardened and heat-treated steel - Powerful motor - Large spindle stroke - Easy-to-read control panel - U-type spindle guard with CE-compliant limit switch - Manually adjustable worktable, 360° rotation, with T-slots - V-belt drive guard equipped with safety limit switch - CE certification - Adjustable key-type drill chuck with Morse taper mounting - Taper drift supplied for tool release Technical Data MAX. DRILLING DIAMETER IN STEEL: 20 mm MAX. THREADING DIAMETER IN STEEL: M16 COLUMN DIAMETER: 85 mm Fsdpfx Asrif Trob Ssft SPINDLE STROKE: 135 mm SPINDLE-TO-COLUMN DISTANCE: 260 mm MAX. SPINDLE-TO-TABLE DISTANCE: 366 mm MAX. SPINDLE-TO-BASE DISTANCE: 678 mm SPINDLE FITTING: MT2 SPEED RANGE: 280–1,875 rpm NUMBER OF SPEEDS: 5 TABLE DIMENSIONS: 300 x 320 mm BASE DIMENSIONS: 376 x 566 mm MACHINE HEIGHT: 1,245 mm MOTOR POWER: 1.1 kW SUPPLY VOLTAGE: 400 V NET WEIGHT: 179 kg DIMENSIONS (L x W x H): 800 x 450 x 1,250 mm Optional Equipment Cooling system

Sąlyga: naujas, Gamybos metai: 2025, The CORMAK WS32 bench drill is a robust tool featuring high spindle rigidity. It offers automatic left-hand rotation engagement, a large spindle stroke, and a clearly arranged control panel. Constructed from the highest quality seasoned castings, it comes equipped with a powerful motor and CE certification. The maximum drilling diameter in steel is 32 mm, and the maximum thread-cutting diameter is M24. Fitted with an MK3 spindle taper, it ensures stability and effortless tool changes, making it ideal for both professional and hobby applications. Features of the WS32 bench drill: - High spindle rigidity - Thread cutting via automatic left-hand rotation engagement - Left-hand rotation switch - Spindle housing, column, table, and base made from high-quality seasoned castings - Spindle and gearbox shafts manufactured from hardened and heat-treated steel - High motor power - Large spindle travel - Readable control panel - U-type spindle guard with limit switch in compliance with CE standards - Manually adjustable worktable with 360° rotation and T-slots - Belt drive guard equipped with safety limit switch - CE certificate - Adjustable keyed drill chuck with Morse taper shank - Ejector wedge for Morse taper Ffodpsrif Udjfx Ab Sst Technical specifications MAX. DRILLING DIAMETER IN STEEL: 32 mm MAX. THREAD CUTTING DIAMETER IN STEEL: M24 COLUMN DIAMETER: 100 mm SPINDLE TRAVEL: 150 mm SPINDLE-TO-COLUMN DISTANCE: 265 mm MAX. SPINDLE-TO-TABLE DISTANCE: 390 mm MAX. SPINDLE-TO-BASE DISTANCE: 745 mm SPINDLE MOUNT: MK3 SPINDLE SPEED RANGE: 280, 400, 675, 1140, 1875 rpm NUMBER OF SPEEDS: 5 TABLE DIMENSIONS: 380 x 400 mm BASE DIMENSIONS: 645 x 470 mm MACHINE HEIGHT: 1370 mm MOTOR POWER: 1.1 kW POWER SUPPLY: 400V NET WEIGHT: 230 kg DIMENSIONS: 900 x 500 x 1400 mm Optional equipment: Cooling system

Sąlyga: naujas, Gamybos metai: 2025, The drill, thanks to its rigid construction, ensures optimal drilling quality. The tilting table allows for a wide range of machining operations. The device is equipped with an electronic speed display and a drilling depth stop. Machine Description - Tilting table from -45° to +45° - Rigid machine frame - Stepless spindle speed adjustment - Rack-and-pinion height-adjustable table - Three-spoke feed handle - Drilling depth stop - Electronic drilling speed indicator - Laser pointer - Work area lighting Technical Specifications MAXIMUM DRILLING DIAMETER: 20 mm SPEED RANGE: 190–2700 rpm POWER SUPPLY: 230 V SPINDLE TAPER: MK2 MAXIMUM SPINDLE STROKE: 120 mm DISTANCE SPINDLE TO COLUMN: 170 mm DISTANCE SPINDLE TO BASE: 530 mm TABLE HEIGHT ADJUSTMENT RANGE (on column): 380 mm COLUMN DIAMETER: 70 mm TABLE DIMENSIONS: 280 x 280 mm BASE DIMENSIONS: 480 x 290 mm MOTOR POWER: 750 W HEIGHT: 1120 mm Ffsdpfovzqrzex Ab Sot WEIGHT: 66 kg Manufacturer: Cormak

Sąlyga: naujas, Gamybos metai: 2025, CORMAK Z7016A Vario Bench Drill for Metal – Precision Column Drill with Infinitely Variable Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill designed for precise drilling operations in professional and workshop settings. Its stepless speed adjustment, robust construction, and versatile features provide maximum control over the drilling process and high work efficiency. Key Machine Advantages - Infinitely variable speed control – range from 440 to 2600 rpm allows for optimal adjustment to the machined material. - Robust cast iron construction – ensures high rigidity and reduces vibration during operation. - Worktable with height and tilt adjustment – tiltable from -45° to +45° and equipped with rack-and-pinion height adjustment. - Laser alignment and LED lighting – guarantee maximum drilling precision and user comfort. - Electronic speed display – enables complete real-time parameter monitoring. - 65 mm vise included – machine ready to work immediately after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a solid 60 mm diameter column and a rigid cast iron base measuring 345 × 210 mm. The machine body and table are manufactured from precision-machined castings. The MT2 taper allows for a wide range of tool fits, and a 60 mm quill stroke enables deep hole drilling. The overall height of just 870 mm makes it an exceptionally ergonomic and mobile unit. Precision and Work Efficiency Equipped with a 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables efficient drilling in metal up to 16 mm in diameter. No need for belt changes – thanks to the seamless speed adjustment, machine setup time is significantly reduced. The ergonomic three-arm feed lever, depth gauge, and guided quill system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a bench drill for metal recommended for: - Metal and maintenance workshops - Maintenance departments Fodpfx Abjxbzuvj Soft - Technical schools - Small production lines and prototyping facilities Standard Equipment - 65 mm vise - Laser drilling pointer - LED work area illumination - Electronic speed display - Three-arm feed lever - Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Maximum drilling diameter 16 mm Spindle speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max. quill travel 60 mm Distance spindle to column 125 mm Distance spindle to base 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Sąlyga: naujas, Gamybos metai: 2025, The drill ensures perfect drilling quality thanks to its rigid construction. The tilting table allows for a wide range of machining operations. The device is equipped with an electronic speed indicator and drilling depth gauge. A 65 mm vise is included. Machine description: - Tilting table from -45° to +45° - Rigid machine construction - Table height adjustment via rack-and-pinion - Three-arm feed lever - Drilling depth gauge - Electronic speed indicator - Laser guide - Work area lighting Technical specifications: MAX. DRILLING DIAMETER: 16 mm SPEED RANGE: 350–2400 rpm POWER SUPPLY: 230 V SPINDLE TAPER: MT2 MAX. SPINDLE STROKE: 90 mm SPINDLE-TO-COLUMN DISTANCE: 150 mm Ffsdpferif H Eex Ab Set SPINDLE-TO-BASE DISTANCE: 430 mm TABLE HEIGHT ADJUSTMENT RANGE (ON COLUMN): 335 mm COLUMN DIAMETER: 60 mm TABLE DIMENSIONS: 240x240 mm BASE DIMENSIONS: 400x232 mm MOTOR POWER: 700 W HEIGHT: 910 mm WEIGHT: 46 kg