Rotorinis Kultivatorius Dviems pirkti naudotą (507)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
ManitouMRT 2660 vision
Skambinti
Būklė: naudotas, Gamybos metai: 2025, keliamoji galia: 6 000 kg, kėlimo aukštis: 25 900 mm, bendras ilgis: 9 280 mm, Max. lifting capacity: 6,000 kg
- Lifting height: 25.90 m
- Maximum lateral outreach: 21.70 m
- Tilting angle a4: 12°
- Discharge angle a5: 110°
- Upper carriage rotation: 360°
- Tyre specification: 445/65 R22.5
- Drive wheels (front/rear): 2 / 2
- Steering type: 2-wheel steering, 4-wheel steering, crab mode
- Support type: Dual telescopic
- Outrigger control: Individual or simultaneous outrigger commands
- Manufacturer: Yanmar
- Emission standard: Stage V / Tier 4
- Engine model: 4TN107FHT-6SMU1
- Rated engine power / output (kW): 156 HP / 115 kW
- Max. torque / engine speed (rpm): 602 Nm @ 1,500 rpm
- Number of cylinders - cylinder displacement: 4 - 4,567 cm³
- Engine cooling system: Water cooling
- Number of batteries / voltage per battery / battery capacity: 2 x 12 V / 120 Ah
- Battery starting current (EN): 850 A
- Transmission type: Hydrostatic with Speedshift
- Transmission / number of forward gears / number of reverse gears: Speedshift 2 / 2
- Max. travel speed: 40 km/h
- Tractive force: 8,600 daN
- Parking brake: Automatic negative parking brake
- Service brake: Oil-immersed multi-disc brakes on front and rear axles
- Gradeability - laden / unladen: 40.40% / 45.50%
- Pump type: Variable displacement pump
- Hydraulic flow rate: 185 l/min
- Hydraulic pressure: 350 bar
- Engine oil: 13 l
- Hydraulic oil: 260 l
Gusdpfx Aeynmlnsf Doa
- Fuel tank capacity: 270 l
- Diesel exhaust aftertreatment (AdBlue®): 24 l
- Noise level in cab (LpA): 68 dB
- External sound level (LwA): 108 dB
Mažas skelbimas
Gorzów Wielkopolski
625 km
ROTORINIAI MENTINIAI VAKUUMINIAI SIURBLIAI, VEIKIANTYS SAUSUOJU BŪDU
BeckerVTLF 2.250
Skambinti
Būklė: naujas, Gamybos metai: 2026, ROTARY VANE VACUUM PUMPS, DRY-RUNNING
The VTLF 2.250 is a dry-running displacement pump designed for rough vacuum applications and continuous operation. It utilizes self-lubricating vanes made from a graphite composite, requires minimal maintenance, and does not need any oil changes.
FEATURES
- 100% dry (oil-free) operation
- Quiet running
- Long vane service life
- Designed for continuous duty
- Air-cooled
- Direct drive using a single shaft
- Compact design
- Wide range of motor options available
Gujdpotty Duofx Af Dea
BENEFITS
- Low operating and maintenance costs
- No cycling times
- Quiet operation – no silencer housing required
- Small footprint for space-saving installation
- Simple design for quick and easy on-site servicing to minimize downtime
SPECIFICATIONS
Volume flow rate 50 Hz: 244 m³/h
Ultimate vacuum 50 Hz: 200 mbar
Power consumption 50 Hz: 5.5 kW
Sound level 50 Hz: 77.0 dB(A)
Volume flow rate 60 Hz: 286 m³/h
Ultimate vacuum 60 Hz: 200 mbar
Power consumption 60 Hz: 6.6 kW
Sound level 60 Hz: 79.0 dB(A)
Weight: 151.0 kg (without motor)
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
ManitouMRT 3255
Skambinti
Būklė: naudotas, Gamybos metai: 2021, keliamoji galia: 5 500 kg, kėlimo aukštis: 31 600 mm, bendras ilgis: 9 700 mm, Rotacinis krautuvas
Manitou MRT 3255
Guedpeym D N Ujfx Af Dja
Variklis: dyzelinis
Pagaminimo metai: 2021
Kėlimo aukštis (mm): 31 600
Keliamoji galia (kg): 5 500
Mažas skelbimas
Siemianowice Śląskie
632 km
Tagliavini Rotorinė siuvinėjimo krosnelė
Skambinti
Gamybos metai: 2022, būklė: naujas, Tagliavini Rotary Oven
- New
- For trays 60 x 80 cm
- Gas or oil burner
- Computerized control
- 1 rack with 18 shelves
- 12 months warranty
- Immediately available
Gedpfxep Ebxme Af Dsua
- From stock or with delivery
- Price on request
Mažas skelbimas
Rödermark
1 168 km
Dviems stulpams automatinė kampinė juostinė pjūklas
MEBAECO 335 GA
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: 68892, Offer 26014
Hydraulic Two-Column Guided Mitre Bandsawing Machine (Automatic)
Technical Specifications:
- Fully automatic cutting cycle, hydraulic lifting/lowering of the saw frame
- Manual mitre adjustment with hydraulic clamping
- Automatic material feed, motorised mitre adjustment
- Saw blade dimensions: 4400 x 34 x 1.1 mm
Godpfoytn Diex Af Doua
- Continuously variable cutting speed: 15 – 150 m/min
- Stepless cutting pressure control: 10 – 15 bar
- Downfeed rate: 0 – 300 mm/min
- Mitre cutting range: 30° – 90°
- At 90°: round material up to 335 mm diameter
- At 90°: square/flat material up to 500 x 335 mm
- At 45°: round material up to 330 mm diameter
- At 45°: rectangular standing up to 320 x 335 mm
- At 30°: rectangular standing up to 170 x 335 mm
- Automatic material feed
- Discharge roller conveyor: 4000 mm
- Infeed roller conveyor: 4000 mm
- Drive: 400 V / 6.5 kW
- Floor space (approx.): W 2300 x H 1750 x D 2200 mm
- Weight (approx.): 1800 kg
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
ManitouMRT 3570 vision
Skambinti
Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 7 000 kg, kėlimo aukštis: 34 700 mm, bendras ilgis: 10 300 mm, Max. lifting capacity: 7,000 kg
- Height: 24.80 m
- Maximum lateral reach: 20.50 m
- Dump angle: 12°
- Discharge angle: 110°
- Uppercarriage rotation: 360°
- Drive wheels (front/rear): 2 / 2
- Steering modes: 2-wheel steering, 4-wheel steering, crab steering
- Support type: Double telescopic
- Stabilizer controls: Individual or simultaneous control
Godjykvfcjpfx Af Doua
- Engine manufacturer: Yanmar
- Emission standard: Stage V / Tier 4
- Engine model: 4TN107FTT-6SMU1
- Rated engine output / power: 173 HP / 127 kW
- Max. torque / engine speed: 805 Nm @ 1,500 rpm
- Number of cylinders – cylinder capacity: 4 – 4567 cm³
- Engine cooling system: Water cooling
- Number of batteries: 2 x 12 V
- 12V battery capacity: 120 Ah
- Battery cold cranking current (EN): 850 A
- Transmission type: Hydrostatic with Speedshift
- Transmission / number of gears (forward) / number of gears (reverse): Speedshift / 2 / 2
- Max. travel speed: 40 km/h
- Drawbar pull: 9,200 daN
- Park brake: Automatic negative parking brake
- Holding brake: Oil-immersed disc brakes on front and rear axles
- Gradeability – loaded / unloaded: 32.40% / 41.40%
- Pump type: Variable displacement pump
- Hydraulic flow rate: 185 l/min
- Hydraulic pressure: 350 bar
- Engine oil: 13 l
- Hydraulic oil: 300 l
- Fuel tank capacity: 320 l
- Diesel exhaust aftertreatment (AdBlue®): 24 l
- In-cab noise level (LpA): 67 dB
- External noise level (LwA): 108 dB
- Hand/arm vibration value: < 2.50 m/s²
- Steering wheels (front/rear): 2 / 2
- Controls: 2 joysticks
- Cabin safety approval: ROPS - FOPS Level 2
- Attachment recognition system (E-Reco): Standard
Mažas skelbimas
Stuttgart
1 231 km
Motorizuotas kultivatorius
KöpplHydro Athlet 22
Skambinti
Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 16,18 kW (22,00 AG), kuro tipas: benzinas, pavaros tipas: hidrostatinis, Gamybos metai: 2008, KÖPPL Hydro Athlet
Professional Hydrostatic Power Unit with 85cm Reverse Rotary Tiller
Technical Specifications:
- Engine: Briggs & Stratton Vanguard, 2-cylinder 4-stroke petrol engine, 22 HP, electric start
- Transmission: Infinitely variable hydrostatic drive
- Steering arm: rubber-mounted, tool-free height and side adjustment
- Tyres: 23 x 8.50 - 12 agricultural tread (AS)
- Hydraulic axle adjustment
- Towing hook flange
- Fuel: Unleaded petrol
Accessories:
1. Portal axle
2. KÖPPL SVU-85 reverse rotary tiller
This KÖPPL HA Hydro tool carrier is in well-maintained overall condition with the typical signs of use and wear for this equipment class. Major service has just been carried out. Immediately ready for operation!
Sale as a used machine under exclusion of return, guarantee, and warranty.
- Gross price €13,990 // Net price €11,756
- Inspection/test drive welcome!
Gjdpfxsv Ecm Eo Af Deua
- Nationwide shipping €220 via freight forwarder.
- Financing/leasing can be arranged individually!
Mažas skelbimas
Stuttgart
1 231 km
Motorizuotas kultivatorius
AgriaTaifun 23
Skambinti
Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 16,92 kW (23,00 AG), kuro tipas: benzinas, pavaros tipas: hidrostatinis, Gamybos metai: 2022, veikimo valandos: 40 h, Agria 5900 Taifun
Professional Hydro Tool Carrier
Technical Details:
Kawasaki 2-cylinder, 4-stroke petrol engine, 23 HP, electric start
Transmission: Infinitely variable hydrostatic drive with single-plate dry clutch
Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h
Handlebar: rubber-mounted, height and side adjustable without tools
Steering: power steering (handlebar active steering)
Tyres: 23 x 8.50 - 12 AS
Standard equipment: tyres, service and parking brake, hour meter, manual start, electric starter, power socket
Fuel: Unleaded petrol
Weight: approx. 221.00 kg
Features:
Speed control via “Hahnenkamm” lever for optimum operating comfort
Central parking brake
Stepless hydrostatic drive for perfect adaptation of working speed
Robust, low-maintenance design for continuous use under the toughest conditions
Equipped as standard with operating hour meter
Agria mounting flange for form-fit and force-fit connection between base unit and attachment
Powerful engine options ensure efficient work with professional attachments
Easy to move the machine even with the engine off by releasing the wheels
Possible attachments:
Grounds care: mowing, mulching, round baler and belt rake
Soil cultivation: reverse rotary tiller, harrow
Property and pathway maintenance: weed removal, snow clearing, snow blower, spreading, sweeping
Woodland maintenance: brushwood chipper
This Agria 5900 Taifun Hydro Tool Carrier is a 2022 model, with approximately 40 operating hours, and has served as a demonstration unit up to now. The Taifun is in like-new overall condition, minimal signs of use, and ready for immediate operation.
Sale is offered as a used machine with return, warranty, and guarantee excluded.
Net price €16,386 // Gross price €19,500
Gujdpfx Aov Ecl Usf Doa
- On-site inspection / test drive gladly possible
- Nationwide shipping €180 via freight carrier
- Financing / leasing packages available upon request!
Mažas skelbimas
Stuttgart
1 231 km
Motorizuotas kultivatorius
Agria5900 Cyclone 23
Skambinti
Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 16,92 kW (23,00 AG), kuro tipas: benzinas, pavaros tipas: hidrostatinis, Gamybos metai: 2024, veikimo valandos: 75 h, Agria 5900 Taifun
Professional Hydrostatic Implement Carrier
Gjdpfxov Ecdkj Af Djua
Technical Specifications:
- Kawasaki 2-cylinder, four-stroke petrol engine with 23 HP and electric start
- Transmission: infinitely variable hydrostatic drive with single-plate dry clutch
- Speeds: Forward: 0–7 km/h, Reverse: 0–3.6 km/h
- Handlebar: rubber-mounted, height and side adjustable without tools
- Steering: power steering (active handlebar-steering system)
- Tyres: 23 x 8.50 - 12 agricultural tread
- Standard equipment: tyres, service and parking brake, hour meter, manual start, electric starter, power socket
- Fuel: unleaded petrol
- Weight: approx. 221.00 kg
Special Features:
- Intuitive steering with minimal effort thanks to active handlebar-steering system
- Patented easy-control panel for intuitive operation
- Powerful professional engines ensure sufficient output for all attachments
- Portal axle for shifting the centre of gravity depending on location and attachment
- Excellent visibility even in poor lighting conditions due to LED safety lighting
- Standard support leg for comfortable parking without attachments
- Hydraulic safety valve for secure positioning even on steep slopes
- Optimised air intake reduces suction of dirt and dust
- Central parking brake
- Infinitely variable hydrostatic drive for optimal adjustment of working speed
- Robust, low-maintenance design for continuous operation under the toughest conditions
- Hour meter as standard
- Agria quick-attach flange for a positive, secure connection between base unit and attachment
- Powerful engines ensure fast operation with professional attachments
- Easy to maneuver even without engine running thanks to wheel release
Possible Attachments:
- Green area maintenance: mowing, mulching, baling, and band raking
- Soil cultivation: reverse tillers, harrows
- Property and path maintenance: weed removal, snow clearing, snow blowers, grit spreading, sweeping
- Woody plant maintenance: brushwood choppers
This Agria 5900 Cyclone Hydro implement carrier is from model year 2024, has approximately 75 operating hours, and has only been used as a demonstration machine so far. The Cyclone is in excellent, as-new overall condition, with minimal signs of use, and is immediately ready for work.
Sale is as a used machine, with return, warranty, and guarantee excluded.
Net price: €18,479 // Gross price: €21,990
- Viewing and test drive welcome
- Nationwide shipping by freight carrier for €180!
- Financing and leasing available on request!
Mažas skelbimas
Tata
923 km
Smulkintuvas, rotorinis kirptuvas 22kW
Eric Schomberg ES60/1202x11kw
Skambinti
Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 22 kW (29,91 AG), bendras svoris: 2 600 kg, Gamybos metai: 2006, Cutting unit width: 600 mm
Cutting unit length: 1,200 mm
Shaft center distance (between knife shafts): 250 mm
Knife shaft rotational speed: approx. 16 rpm
Knife shaft torque: approx. 17,000 Nm
Feed hopper: 1,200 mm x 2,400 mm
Drive power: 2 x 11 kW
Total drive power: 22 kW
Gsdjtzbvyspfx Af Dsua
Weight: 2,600 kg
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
MagniRTH 6.35
Skambinti
Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 6 000 kg, kėlimo aukštis: 34 900 mm, bendras ilgis: 9 290 mm, - Rotating telescopic handler RTH 6.35
- Maximum lifting capacity 6,000 kg (centre of gravity 600 mm)
- Maximum lifting height 34.90 m
- Rotation 360 degrees (continuous)
- Engine: Volvo TAD 583 VE, Stage V
- Rated power 175 kW (238 HP) at 2,300 rpm
- Maximum torque 975 Nm at 1,380 rpm
- Displacement 5.13 l
- Number of cylinders 4 in-line
- Engine configuration: Diesel with direct injection and turbocharging
- Cooling system: Water-cooled intercooler
- Drive type: Hydrostatic
- Model: Danfoss / Rexroth
- Maximum pressure 480 bar
- Flow rates: Electronically controlled axial piston pump. Variable displacement motor.
- Transmission: Dropbox gearbox with 2 speeds for forward and reverse travel
Gsdpfsydqw Hsx Af Dsua
- Axles and brakes: Axle type with planetary final drives
- Rear axle: Steering pendulum axle with hydraulic lock
- Front axle: Oscillating steering axle with level compensation +/- 8 degrees
- Service brake: Oil-immersed disc brakes on each axle, hydraulically actuated
- Parking brake: Negative brake, hydraulically actuated
- Tyre size: 445/65 R22.5
- Maximum driving speed: 40 km/h
- Maximum tractive effort at lifting hook: 152 kN
- Gradeability: 65%
- Turning radius (with forks): 7,000 mm
- Diesel fuel tank: 270 l
- AdBlue: 40 l
- Hydraulic oil: 220 l
- Engine oil: 16 l
- Coolant: 40 l
- Maximum operating pressure: 350 bar
- System type: Load sensing
- Operating pump: Danfoss / Rexroth variable displacement pump
- Manifold for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2
- Manifold for outriggers: Bosch Rexroth electrohydraulic actuators
- Motion control: Two 2-axis Danfoss joysticks with dead man's switch
- Control system with CAN-bus technology
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
MagniRTH 6.21 Drive
Skambinti
Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 6 000 kg, kėlimo aukštis: 20 800 mm, bendras ilgis: 7 890 mm, - Rotating Telescopic Handler RTH 6.21
- Maximum lifting capacity: 6,000 kg (load center 600 mm)
- Maximum lifting height: 20.80 m
- Continuous 360° rotation
- Rated power: 100 kW (136 HP) at 2,200 rpm
- Max. torque: 500 Nm at 1,600 rpm
- Displacement: 3.6 l
- Number of cylinders: 4 in-line
- Engine configuration: Diesel engine with direct injection and turbocharging
- Cooling system: Water-cooled intercooler
- Drive type: Hydrostatic
- Model: Danfoss / Rexroth
- Max. pressure: 480 bar
- Flow rates: Electronically controlled axial piston pump. Variable displacement motor.
- Transmission: Dropbox gearbox with 2 speeds for forward and reverse
- Axles and brakes: Axles with planetary final drives
- Rear axle: Steering oscillating axle with hydraulic lock
- Front axle: Oscillating steering axle with level compensation +/- 8 degrees
Godpfx Afjxfcb Se Dsua
- Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically operated
- Parking brake: Negative brake, hydraulically operated
- Tire size: 445/65 R22.5
- Performance:
- Max. travel speed: 40 km/h
- Max. towing force at tow hook: 72 kN
- Gradeability: 41%
- Turning radius (with forks): 5,900 mm
- Unladen weight: 17,600 kg
- On front axle, unladen (boom retracted and lowered): 8,000 kg
- On rear axle, unladen (boom retracted and lowered): 9,600 kg
- Max. operating pressure: 350 bar
- Hydraulic system type: Load sensing
- Working pump: Danfoss / Casappa variable displacement pump
- Valve block for boom and upper carriage movements: Danfoss electro-proportional valve SIL
- Valve block for outriggers: Bosch Rexroth electrohydraulic actuators
- Motion control: Two 2-axis Danfoss joysticks with deadman function; control via CAN-bus technology
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
MagniRTH 6.35
Skambinti
Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 6 000 kg, kėlimo aukštis: 34 900 mm, bendras ilgis: 9 290 mm, - Rotating telescopic handler RTH 6.35
- Maximum lifting capacity 6,000 kg (centre of gravity 600 mm)
- Maximum lifting height 34.90 m
- Rotation 360 degrees (continuous)
- Engine: Volvo TAD 583 VE, Stage V
- Rated power 175 kW (238 HP) at 2,300 rpm
- Maximum torque 975 Nm at 1,380 rpm
- Displacement 5.13 l
Gedpfeydqv Nex Af Djua
- Number of cylinders 4 in-line
- Engine configuration: Diesel with direct injection and turbocharging
- Cooling system: Water-cooled intercooler
- Drive type: Hydrostatic
- Model: Danfoss / Rexroth
- Maximum pressure 480 bar
- Flow rates: Electronically controlled axial piston pump. Variable displacement motor.
- Transmission: Dropbox gearbox with 2 speeds for forward and reverse travel
- Axles and brakes: Axle type with planetary final drives
- Rear axle: Steering pendulum axle with hydraulic lock
- Front axle: Oscillating steering axle with level compensation +/- 8 degrees
- Service brake: Oil-immersed disc brakes on each axle, hydraulically actuated
- Parking brake: Negative brake, hydraulically actuated
- Tyre size: 445/65 R22.5
- Maximum driving speed: 40 km/h
- Maximum tractive effort at lifting hook: 152 kN
- Gradeability: 65%
- Turning radius (with forks): 7,000 mm
- Diesel fuel tank: 270 l
- AdBlue: 40 l
- Hydraulic oil: 220 l
- Engine oil: 16 l
- Coolant: 40 l
- Maximum operating pressure: 350 bar
- System type: Load sensing
- Operating pump: Danfoss / Rexroth variable displacement pump
- Manifold for boom and upper carriage movements: Danfoss electro-proportional valve SIL 2
- Manifold for outriggers: Bosch Rexroth electrohydraulic actuators
- Motion control: Two 2-axis Danfoss joysticks with dead man's switch
- Control system with CAN-bus technology
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
GildemeisterTwin 32
Skambinti
Gamybos metai: 2003, būklė: paruoštas naudoti (naudotas), Galima Gildemeister CNC dvigubos galvutės tekinimo staklė su Y ašimi. Strypo pralaida: 32 mm, įrankių vietos: 2x12, pagrindinio ir priešpriešinio veleno greitis: 8000 aps./min, valdymas: Siemens Sinumerik 840D Powerline, darbo valandos: 39 426 h, veleno valandos: 25 529 h. Komplekte yra KSS sistema, įrankiai ir trumpų strypų padavimo įrenginys 1500 mm Iemca Vip 80E. Yra dokumentacija. Galima apžiūra vietoje. Tikimasi, kad bus prieinama nuo 2026 m. balandžio pabaigos.
Gsdpfoygw Svex Af Deua
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
HyundaiLM 1600 TTSY
Skambinti
Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), Tekinimo ilgis: 705 mm, tekinimo skersmuo: 230 mm, X1/X2 eiga: 165 mm/195 mm, Y eiga: 100 mm, Z1/Z2 eiga: 700 mm/702 mm, strypo pralaidumas: 51 mm, apsukos: 6000 aps./min, įrankių vietos: 2x12. Staklių matmenys X/Y/Z: apie 5100 mm/2200 mm/2500 mm, svoris: apie 8400 kg, valdymas: Fanuc 31i-B, darbo valandos: 1565 h, veleno valandos: 506 h. Yra transformatorius, drožlių transporterio įrenginys, filtravimo sistema ir aušinimo įrenginys. Kabinos durų stiklas yra įskilęs. Dokumentacija prieinama. Galima apžiūra vietoje.
Gedpjxaphnjfx Af Doua
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
HyundaiLM 1600 TTMS
Skambinti
Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), Tekinimo ilgis: 705 mm, tekinimo skersmuo: 230 mm, X1/X2 eiga: 165 mm/195 mm, Z1/Z2 eiga: 700 mm/720 mm, strypo pralaidumas: 51 mm, apsisukimų dažnis: 6000 aps./min, įrankių pozicijos: 2x12. Staklių matmenys X/Y/Z: apie 5100 mm/2200 mm/2500 mm, svoris: apie 8200 kg, valdymas: Fanuc 31i-B, darbo valandos: 1407 h, verpstės valandos: 343 h. Komplekte transformatorius ir drožlių transporterio įrenginys. Dokumentacija yra. Galima apžiūra vietoje.
Guedpfx Aexaphuef Doa
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
TraubTNC 42/65 DGY
Skambinti
Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible.
Gsdpjv Scrbsfx Af Deua
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
MazakMultiplex MP 620
Skambinti
Gamybos metai: 1992, būklė: paruoštas naudoti (naudotas), Revolveris: 2, įrankių vietos: 12, įrankio tvirtinimas: VDI 40, maks. tekinimo skersmuo: 320 mm, maks. apvertimo skersmuo: 390 mm, veleno skylė: 61 mm, apsukos: 5000 aps./min, veleno galia: 15 kW, eigos X/Z: 230 mm/430 mm, staklių matmenys X/Y/Z: 3900 mm/2000 mm/2900 mm, svoris: apie 8600 kg. Komplekte yra robotas. Yra dokumentacija. Apžiūra vietoje galima.
Guodpfxjyhgpaj Af Dsa
Mažas skelbimas
Vokietija
999 km
CNC staklės su dviem velenais
TakisawaTT-500 GD
Skambinti
Gamybos metai: 2018, būklė: paruoštas naudoti (naudotas), A high-precision Takisawa CNC lathe with dual spindles is available. Spindle power: 2x 7.5 kW, spindle speed: 5000 rpm, spindle nose: F-80, tool holder: 2x 5 positions, max. turning diameter: 50 mm, max. turning length: 50 mm, max. workpiece weight: 2x 0.5 kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Includes rear-mounted hinged belt conveyor, automatic central lubrication, machine enclosure with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle, and discharge chute for test piece. Documentation available. On-site inspection possible.
Gujdpfx Afeu Dm Izs Dja
Mažas skelbimas
Wiefelstede
1 046 km
Rotorinis stabdys krano stabdys
Pintsch BubenzerSB 23-450x30-80/6
Skambinti
Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Rotor brake, disc brake, electrohydraulic disc brake, crane brake, disc, drum, and storm brakes, overhead crane brake
Gusdpfx Afsv Hbk Eo Dea
-Manufacturer: Pintsch Bubenzer, unused rotor/disc brake
-Type: SB 23-450x30-80/6
-Braking torque: 1850 Nm
-Accessories: incl. 3 sets of replacement brake discs
-Quantity: 2 brakes available
-Price: per piece
-Dimensions: 370/330/H650 mm
-Total weight: 105.7 kg/unit
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
MagniRTH 6.21
Skambinti
Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 6 000 kg, kėlimo aukštis: 20 800 mm, bendras ilgis: 7 890 mm, - Rotating Telescopic Handler RTH 6.21
Gsdpfxsx Avycs Af Dsua
- Maximum lifting capacity: 6,000 kg (load center 600 mm)
- Maximum lifting height: 20.80 m
- Continuous 360° rotation
- Rated power: 100 kW (136 HP) at 2,200 rpm
- Max. torque: 500 Nm at 1,600 rpm
- Displacement: 3.6 l
- Number of cylinders: 4 in-line
- Engine configuration: Diesel engine with direct injection and turbocharging
- Cooling system: Water-cooled intercooler
- Drive type: Hydrostatic
- Model: Danfoss / Rexroth
- Max. pressure: 480 bar
- Flow rates: Electronically controlled axial piston pump. Variable displacement motor.
- Transmission: Dropbox gearbox with 2 speeds for forward and reverse
- Axles and brakes: Axles with planetary final drives
- Rear axle: Steering oscillating axle with hydraulic lock
- Front axle: Oscillating steering axle with level compensation +/- 8 degrees
- Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically operated
- Parking brake: Negative brake, hydraulically operated
- Tire size: 445/65 R22.5
- Performance:
- Max. travel speed: 40 km/h
- Max. towing force at tow hook: 72 kN
- Gradeability: 41%
- Turning radius (with forks): 5,900 mm
- Unladen weight: 17,600 kg
- On front axle, unladen (boom retracted and lowered): 8,000 kg
- On rear axle, unladen (boom retracted and lowered): 9,600 kg
- Max. operating pressure: 350 bar
- Hydraulic system type: Load sensing
- Working pump: Danfoss / Casappa variable displacement pump
- Valve block for boom and upper carriage movements: Danfoss electro-proportional valve SIL
- Valve block for outriggers: Bosch Rexroth electrohydraulic actuators
- Motion control: Two 2-axis Danfoss joysticks with deadman function; control via CAN-bus technology
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Ennepetal
1 181 km
Dviem rankomis valdomi pultai
Skambinti
Būklė: geras (naudotas), Dvi rankenos valdymo pultai, įvairių modelių, dalis su avarinio stabdymo mygtuku, žali arba pilki, kai kurie su stovu, kaip parodyta nuotraukose. Kaina galioja žaliam pultui be mygtukų.
Gjdpfjxwm Erex Af Doua
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
ManitouMRT 2660 vision
Skambinti
Būklė: naudotas, Gamybos metai: 2025, keliamoji galia: 6 000 kg, kėlimo aukštis: 25 900 mm, bendras ilgis: 9 280 mm, Max. lifting capacity: 6,000 kg
- Lifting height: 25.90 m
- Maximum lateral outreach: 21.70 m
- Tilting angle a4: 12°
- Discharge angle a5: 110°
- Upper carriage rotation: 360°
- Tyre specification: 445/65 R22.5
- Drive wheels (front/rear): 2 / 2
- Steering type: 2-wheel steering, 4-wheel steering, crab mode
- Support type: Dual telescopic
- Outrigger control: Individual or simultaneous outrigger commands
- Manufacturer: Yanmar
- Emission standard: Stage V / Tier 4
- Engine model: 4TN107FHT-6SMU1
- Rated engine power / output (kW): 156 HP / 115 kW
- Max. torque / engine speed (rpm): 602 Nm @ 1,500 rpm
- Number of cylinders - cylinder displacement: 4 - 4,567 cm³
- Engine cooling system: Water cooling
- Number of batteries / voltage per battery / battery capacity: 2 x 12 V / 120 Ah
- Battery starting current (EN): 850 A
- Transmission type: Hydrostatic with Speedshift
- Transmission / number of forward gears / number of reverse gears: Speedshift 2 / 2
- Max. travel speed: 40 km/h
- Tractive force: 8,600 daN
- Parking brake: Automatic negative parking brake
- Service brake: Oil-immersed multi-disc brakes on front and rear axles
- Gradeability - laden / unladen: 40.40% / 45.50%
- Pump type: Variable displacement pump
- Hydraulic flow rate: 185 l/min
- Hydraulic pressure: 350 bar
- Engine oil: 13 l
- Hydraulic oil: 260 l
- Fuel tank capacity: 270 l
- Diesel exhaust aftertreatment (AdBlue®): 24 l
- Noise level in cab (LpA): 68 dB
- External sound level (LwA): 108 dB
Gjdpfx Afoxylvhj Dsua
Mažas skelbimas
Crailsheim
1 155 km
Rotorinis krautuvas
ManitouMRT 2260
Skambinti
Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 6 000 kg, kėlimo aukštis: 21 800 mm, šakių ilgis: 1 200 mm, bendras ilgis: 8 170 mm, - Max. lifting capacity: 6,000 kg
- Height: 21.80 m
- Maximum lateral reach: 18.20 m
- Tilting angle a4: 12°
Gsdpjx Szumjfx Af Dsua
- Dump angle a5: 110°
- Upper carriage rotation: 360°
- Weight: 18,000 kg
- Tyre models: 445/65 R22.5
- Drive wheels (front / rear): 2 / 2
- Steering type: 2-wheel steering, 4-wheel steering, crab steering
- Support type: Dual-stage telescopic
- Outrigger controls: Individual or simultaneous outrigger control
- Manufacturer: Yanmar
- Engine emission standard: Stage V / Tier 4
- Engine model: 4TN107FHT-6SMU1
- Rated engine output / power (kW): 156 Hp / 115 kW
- Max. torque / engine speed (min): 602 Nm @ 1,500 rpm
- Number of cylinders – cylinder displacement: 4 – 4,567 cm³
- Engine cooling system: Water cooling
- Number of batteries / battery voltage: 2 x 12 V
- Battery capacity: 120 Ah
- Battery starting current (EN): 850 A
- Transmission type: Hydrostatic with Speedshift
- Transmission / number of gears (forward) / number of gears (reverse): Speedshift / 2 / 2
- Max. travel speed: 40 km/h
- Tractive effort: 8,600 daN
- Parking brake: Automatic negative parking brake
- Service brake: Oil-immersed multi-disc brakes on front and rear axles
- Gradeability – loaded / unloaded: 40.40% / 45.50%
- Pump type: Variable displacement pump
- Hydraulic flow rate: 185 l/min
- Hydraulic pressure: 350 bar
- Engine oil: 13 l
- Hydraulic oil: 260 l
- Fuel tank capacity: 270 l
- Exhaust aftertreatment for diesel (AdBlue®): 24 l
- In-cab noise level (LpA): 68 dB
- External noise level (LwA): 108 dB
- Hand/arm vibration value: < 2.50 m/s²
- Steering wheels (front / rear): 2 / 2
- Controls: 2 joysticks
- Safety – cab approval: ROPS-FOPS Level 2 cab
- Attachment recognition system (E-Reco): Standard
Mažas skelbimas
Centawa
636 km
Dviem rankomis valdoma pneumatinė šlifuoklė
DMS2HS
Skambinti
Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Fast sanding of multiple components!
We are pleased to present our latest solution—a convenient, two-handed sander designed for rapid processing of various elements such as furniture fronts, coffin parts (including assembled ones), and doors. It also enables the sanding of multiple components (edges) in a stack.
The DMS 2HS is a pneumatic sander equipped with a Flex Trim flap wheel head. This combination ensures top-quality sanding results.
Only compressed air supply is required to operate the device. The machine features a 1/4″ quick coupling as well as a transparent dust extraction guard. An additional benefit is the option to connect an industrial vacuum for dust reduction.
The unit offers speed adjustment and the ability to reverse the direction of operation.
Key features:
* Flex Trim head with a 120 mm working width—equipped with a patented Snaplock adapter, allowing quick head changes without additional tools
Gujdpfx Afjxt Dxhj Dea
* Customizable abrasive media according to customer requirements—for example, for veneer, MDF, composite, wood, and intermediate lacquer sanding
* Dimensions (mm): 455x240x320
* Low weight
* Variable speed control
* Powered by compressed air
Palengviname jums paiešką: "rotorinis kultivatorius dviems"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Rotorinis Kultivatorius Dviems (507)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Akumuliatoriaus Įkroviklis
- Besisukančios Rankos Vyniotuvas
- Ekstrahavimo Rankos
- Kaercher Bd 50 50
- Kaercher Robo 30
- Kalkių
- Keturių Pirštų Rotacinis Griebtuvas
- Konsoliniai Rankos
- Konsoliniai Rankos Lentyna

















































































































































































































