Recoiler pirkti naudotą (92)

Būklė: naudotas, Decoiler/Rewinder for Coil Material HMS Type BA 1.5-06/80 Machine No. Year of manufacture: 1991 Maximum coil weight: 8,000 kg Maximum coil outside diameter: 1,600 mm (with coil car) Maximum coil outside diameter: 2,000 mm (without coil car) Coil support disc diameter: Ø 1,700 mm Coil inside diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expanding jaws width: 750 mm Reel drum height above base plate: 1,500 mm - Reel drum driven via hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on reel drum TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the reel drum, centrally actuated via wedge slider system - Hydraulic press-down arm with hydraulically driven double pendulum roller - Coil car with 12 t lifting capacity and 300 mm stroke - Reel in above-floor travel frame with motorized cross-travel drive Hnsdpfxehx R Etj Abvsl - Hydraulic power unit (separately located, also used for additional functions on a strip processing line) - Without electrical control cabinet (an existing cabinet was used for the entire strip processing line) Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 t Good condition – Not operational electrically

Gamybos metai: 1986, būklė: geras (naudotas), Bandwidth: max. 200 mm Band thickness: 0.1 - 1 mm Coil weight: 0.5 t Mandrel diameter: 304 mm Hnjdpfx Asbh Ucbsbvsl

Gamybos metai: 1976, būklė: geras (naudotas), Strip width: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Hnedsbh Ubwepfx Abvjl Mandrel Ø: 508 mm

Gamybos metai: 1995, būklė: geras (naudotas), Band width: max. 420 mm Hnjdpfx Abjbibqwevsl Band thickness: max. 12 mm Coil weight: 2.4 t

Gamybos metai: 1980, būklė: geras (naudotas), Band width: 1,650/1,750 mm Hnsdpfodn I Hrox Abvsl Band thickness: 0.4 - 3 mm Coil weight: 10 t Interchangeable mandrels, Ø: 304/406/610 mm

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), Band width: 800 - 2,400 mm Band thickness: max. 3.5 mm Coil weight: 20 t Mandrel Ø: 600 mm Hodpfxog Ewano Abvenl

Gamybos metai: 1985, būklė: geras (naudotas), Strip width: 100 - 750 mm Strip thickness: 0.5 - 4 mm Hjdpfx Asd Ha Hbjbvenl Coil weight: 10 t Mandrel diameter: 406/508 mm

Gamybos metai: 1995, būklė: geras (naudotas), Bandwidth: max. 1,900 mm Strip thickness: 0.3 - 3 mm Coil weight: 25 t Hodpfx Asg Iigvsbvsnl Mandrel Ø: 508 mm

Būklė: naudotas, Pay-off and take-up decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of manufacture 2023 (unused) Maximum coil weight: 1,500 kg Coil width with entry arms: 500 mm Coil width without entry arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with adaptor jaws: approx. 380 - 440 mm Decoiler running ring: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Centre of decoiler drum to base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Electrical connection: 400 V, 50 Hz - Infinitely variable decoiler drum speed via frequency inverter - Loop control / proximity switch for decoiler STOP - Central expansion via hand crank - Clockwise and counterclockwise rotation - Pneumatic pressure arm with running roller - 4 entry arms, 870 mm each - 4 plastic adaptor jaws for the decoiler drum for adjustment Hedeua Nngepfx Abvjnl Required space L x W x H Weight: 970 kg Very good condition

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, gaminio plotis (maks.): 1 250 mm, darbinis plotis: 1 250 mm, konvejerio juostos plotis: 1 250 mm, produkto aukštis (maks.): 1 mm, Lakštinio metalo vyniojimo mašinos iš didesnių ritinių į mažesnes, kurių vidinis skersmuo 300 mm, didžiausia masė 300 kg ir plotis iki 1250 mm. Vyniotuve yra integruotas rankinis skaitiklis, skersinio pjovimo žirklės ir ritinio nuėmimo zondas. SAS mažų ritinių vyniotuvas ritiniams iki 300 kg, 1250 mm pločio. Hnjdewqc I Sopfx Abvsl

Būklė: naudotas, Unwinding and rewinding decoiler for coil material WANZKE CAMU Type SC 515/M Serial No. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Decoiler shaft diameter: 90 mm Distance from center of decoiler crown to decoiler base: 950 mm Decoiler crown rotational speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Decoiler drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz Hodpfx Aswvv Rqobvonl - Mechanical expansion of the decoiler crown via hand crank - Drive by gear motor with worm gear, directly coupled to the decoiler shaft - Gear motor equipped with electric brake - Decoiler shaft with mechanical slip clutch, pretensioned and adjustable via disc springs - Decoiler crown without coil-threading arms - Without electrical control system and without loop control switch Space requirements (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, ritės vidinis skersmuo: 508 mm, ritės išorinis skersmuo: 2 000 mm, ritės svoris: 16 000 kg, ritės plotis: 1 000 mm, gaminio plotis (maks.): 1 250 mm, paskutinio kapitalinio remonto metai: 2022, Automatiškai centruojantis FLENDER suvyniojimo būgnas + 2 automatiškai centruojantys FROHLING išvyniojimo būgnai Būgnų komplektas: DU IŠVYNOJIMO ir VIENAS SUVYNIOJIMO Prekės ženklas: - Frohling – išvyniojimui - Flender – suvyniojimui Atnaujinti ir perrinkti su AUTOCENTRAVIMU ir linijiniais bėgeliais 2022 m. (prieš tai taip pat buvo puikios būklės, bet trūko visų priedų ir CPC automatinio centravimo) Talpa: 16MT Vidinis ritės skersmuo: 508 mm, išorinis – 2 000 mm Didžiausias juostos plotis: 1 100 mm (galima padidinti iki 1 250 mm) Didžiausias linijos greitis: 240 m/min Autonominė tepimo sistema su filtru ir siurbliu Hodpfx Abou Hlausvsnl Parduodama be variklių ir greičio keitimo Įranga paruošta bet kokiai apžiūrai mūsų sandėlyje Roverete (TN), Italijoje Dėl klausimų prašome kreiptis. JEIGU DOMINA, SUSISIEKITE SU MUMIS – BŪTINAI SUTARSIME.

Būklė: naudotas, Gamybos metai: 2002, Parduodama profesionali Suomijos gamintojo Macring / Sintech kombinuota ruloninio metalo apdirbimo linija, pagaminta 2002 metais. Linija skirta ruloninio metalo išvyniojimui, išlyginimui, išilginiam pjovimui, pjovimui į lakštus bei suvyniojimui į mažesnes rites. Įranga pritaikyta tiksliam metalo pjovimui iki 1500 mm pločio. Staklės šiuo metu demontuotos, tačiau visi pajungimo elementai sužymėti, todėl paleidimas ir surinkimas bus paprastesnis. Linija valdoma hidrauline sistema. Linijos komplektacija: Išvyniojimo dekoileris – 8 T Metalo lyginimo segmentas Išilginio pjovimo mazgas Atsarginiai pjovimo peiliai Lakštų kirpimo giljotina Stabdymo ir atskyrimo segmentas Suktuvas su separatoriumi Suvyniojimo rekoileris – 8 T Valdymo pultas Elektros spinta Pakėlimo / nuleidimo stalas Apsauginės tvoros Techninė specifikacija: Maksimalus metalo plotis: 1500 mm Maksimalus rulono svoris: 8 T Hnjdpfx Aboy N Sqgsvsl Įranga tinkama skardos apdirbimo, ventiliacijos, stogų, fasadų bei kitai metalo apdirbimo gamybai. Jeigu turite papildomų klausimų – mielai atsakysime.

Gamybos metai: 2026, būklė: naujas, WOODGRAIN STUMP GRINDER – POWER AND PRECISION FOR YOUR GARDEN Engine: 420 cm³ | Power: 9 kW (12.24 HP) | Disc: 300 mm | Tungsten carbide teeth Are you looking for a reliable machine to permanently remove troublesome tree stumps after felling? The Woodgrain is a professional petrol-powered stump grinder, designed with efficiency, durability, and user comfort in mind. With a compact design just 75–80 cm wide, the machine easily accesses areas unreachable by heavy forestry equipment. KEY FEATURES – FP15 STUMP GRINDER: - POWERFUL PETROL ENGINE: At the heart of the machine is a proven four-stroke engine with a 420 cm³ displacement and 9 kW output, ensuring stable operation even with hardwood stumps. - EFFICIENT CUTTING SYSTEM: The 90 mm thick, 300 mm diameter disc is equipped with tungsten carbide (widia) teeth, noted for their extreme hardness and resistance to dulling. - WIDE OPERATING RANGE: Enables stump grinding well below ground level (up to approx. 225 mm) and above (up to 515 mm), allowing complete removal of tree remnants. - MOBILITY AND STABILITY: Large 13" pneumatic wheels ease transport over uneven terrain, while the drum brake can lock one wheel to create a pivot axis for effortless sweeping grinding motion. TECHNICAL SPECIFICATION: - Brand: Woodgrain - Engine: 4-stroke OHV, air-cooled - Engine displacement: 420 cm³ - Nominal power: 9.0 kW / 12.24 HP - Starting system: Manual (recoil cord) - Fuel tank capacity: 6.5 l (unleaded petrol) - Oil pan capacity: 1.1 l - Cutter disc diameter: 300 mm - Cutting disc thickness: 90 mm - Number of cutting teeth: 9 (with tungsten carbide) - Grinding depth (below ground): up to 225 mm - Grinding height (above ground): up to 515 mm - Machine weight: approx. 110 kg SAFETY AND COMFORT: - Emergency stop switch: Conveniently located within operator’s reach, allows immediate machine shutdown in emergency situations. - Adjustable handlebar: Lets you set handle height according to operator and working depth, easing strain on the back. - Robust construction: Steel housing protects the engine and components from mechanical damage and wood debris. SET CONTENTS: - Woodgrain stump grinder - Full set of installed cutting teeth - Service tool kit - Operating manual Hnodpfxsy Sggno Abvol

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Parduodama ruloninio metalo išvyniojimo, išilginio pjovimo ir suvyniojimo linija Būklė: naudota, prijungta – galima pamatyti veikimą gyvai. Skirta ruloninio metalo išvyniojimui, tiksliam pjovimui į siauresnes juostas bei jų suvyniojimui į mažesnius rulonus. Techniniai parametrai: Gamybos metai: 1998 Pagaminta: Lenkijoje Hnsdpfsxlcp Njx Abvel Maks. metalo plotis: 1250 mm Peilių poros: 5 Išilginis pjovimas, plienas: min 0.4 mm / maks 1,2 mm Plėvelės uždėjimo funkcija Atraižų atkirpimas giljotina Liniją sudaro: Išvyniojimo dekoileris 5 T Suvyniojimo rekoileris 5 T Kelių ašmenų diskinės žirklės Stabdymo ir atskyrimo segmentas Suktuvas su separatoriumi Valdymo pultas Paskirtis: Linija pritaikyta ruloninio metalo paruošimui tolimesniam apdirbimui: išvyniojimui, tiksliam išilginiam pjovimui, suvyniojimui į mažesnius rulonus. Jei turėsite daugiau klausimų – mielai atsakysime.

Būklė: naudotas, Gamybos metai: 2014, Technical Description: Cutting height: vertical: 2,150 mm; horizontal: 50–2,000 mm. Cutting length: 4,300 mm. Cutting depth: 80 mm (with clamps: 55 mm). Saw blade protrusion behind the panel: approx. 15 mm. Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow flat tooth. Saw blade rotation: 4,200 rpm. Motor: 4 kW (5.5 HP). Required air pressure: 6 bar. Material support rollers: 20 ball-bearing rollers + 2 feed/outfeed rollers. Panel locking for horizontal cuts via a pneumatic workpiece clamping system with switch on the control panel. Center support: 3 individually foldable support arms for 3 m span. Measurement readout for: horizontal cuts: via electronic digital display with zeroing (for strip cutting from top to bottom), scale from 0–2,100 mm, strip cutting stop from 75–730 mm; vertical cuts: via electronic digital display, scale 0–1,300 mm. Extraction ports: 100 mm for the saw unit and 120 mm for the rear extraction channels, right side of the machine frame. Equipment features: - ADVANCE clamping system, consisting of 2 pneumatically actuated clamps that move motorized up and down on vertical axes using a ball screw. The clamps can be positioned to the top edge of the panel using a joystick. The clamps detect the panel’s top edge via a limit switch and automatically stop when the edge is reached. The clamps then close to hold the panel (max. weight 150 kg). The panel can then be raised for trimming the lower edge and repositioned onto the lower support afterwards (detected by a limit switch as well). Afterward, the clamps can either be raised again or kept clamping the panel to relieve the horizontal cut, preventing the panel from dropping onto the saw blade after the horizontal cut. Standard distance between clamps approx. 1,800 mm. Clamps are mounted on the right side of the machine (other positions available at extra cost). Minimum strip height with Advance clamps: 400 mm. - Electro-pneumatic scoring system for tear-free cuts through double cutting with the main saw blade (no scoring width adjustment required – always ready for use, simple to operate) Hnsdpfx Asy Rphxebvsl - Torsion-free, free-standing machine frame. - Round bar guidance for vertical and horizontal movement. - Pneumatically retractable slatted frame prevents the saw blade from cutting into a backpanel slat. A sensor detects the position of the back slats; the slatted frame retracts pneumatically if the saw blade would impact a slat. - Extraction port for the saw head for dust collection in front of the workpiece. - Extraction port for 3 vertical extraction channels for dust collection behind the workpiece. - Fine-adjustable folding stop for vertical cuts, guided on a 30 mm round bar. - Extension for the stop – heavy panels remaining on the lower rollers that cannot reach the folding stop don’t have to be lifted onto the center support. - Fine-adjustment for horizontal cuts via handwheel. - Folding strip stop with ball bearing scanning at the upper panel edge, adjustable from 75–730 mm.

Būklė: naujas, Gamybos metai: 2025, Advantages of Pre-glued Dowels • No additional glue required when shooting the dowel • No cleaning effort for the water supply system Advantages of DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Versatile application range Hnodpfxswu Dnno Abvsl Technical Data of DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile Application Range • Driving in pre-glued dowels (with water), especially in furniture manufacturing • Driving in positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or carcass connectors

Būklė: naujas, Gamybos metai: 2026, Wood Processor/Splitter CORMAK RPL380 Key features and functions of this machine: - Productivity: Efficient operation with productivity up to 8 m³ of wood per hour, depending on wood type. - Multifunctionality: Combines a chainsaw, splitter, and belt conveyor in one device, enhancing capability and saving time. - Versatility: Suitable for both professionals and individual users, allowing processing of various wood species. - Engine: 15 HP petrol engine provides powerful force necessary for effective cutting and splitting. - Time Efficiency: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. - Reliability: Designed for use in sawmills, the timber industry, and for firewood or construction wood production. - Equipment: Features a STIHL chain guide bar, with an oil tank for the guide bar located at the rear of the housing. - Precision: Cross wedge enables effective splitting and precise cutting to desired length. - Adjustment: Wedge height can be easily adjusted to the log diameter using a lever. - Safety: Operator protection ensured by integrated safety and protection systems. - Mobility: Easy relocation between worksites thanks to wheel chassis and ball hitch. - Belt Conveyor: The belt feeds logs to the splitter and then transports split pieces away. It can be folded in half and set to a vertical position. - Certifications: The processor/splitter comes with required CE quality certificates and technical documentation. A strong 24L hydraulic pump powers: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20T pressure ✅ Discharge conveyor The machine is equipped with a 9-step cross wedge adjustment, allowing splitting of logs of various diameters into 2 or 4 parts. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical specifications Engine: Engine Model: Lanchin G420F Engine Power: 9.0 kW (15 HP) Hjdpfoyw I Epox Abvjnl Displacement: 420 cc Fuel: Petrol Fuel Tank Capacity: 5.4 L Starter: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic system: Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance and cutting parameters: Maximum splitting force: 20T Splitting wedge: 4-way Maximum log diameter: 380 mm Minimum/maximum wood cutting length: 190 mm – 600 mm Chainsaw guide bar length: 18” (45 cm) Productivity: approx. 8 m³/h Feed belt: Length/height of feed conveyor: 1000 mm / 910 mm Feed conveyor dimensions (L × W): 1040 × 254 mm Maximum feed belt incline: 40° Discharge belt: Discharge belt dimensions (L × W): 3200 × 254 mm Discharge belt speed: 27 m/min Wheels and tyres: Size: 135/70R12 Pressure: 2.5 bar Dimensions and weight: Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg

Gamybos metai: 2025, būklė: naujas, New machine Year of manufacture: 2025 Features and technical data: Standard equipment: - Robust machine base - Dowel system for: dowel diameter 8 mm Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) Dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free dispensing gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels Water tank (stainless steel container 7.5 l) Closed water system with 6 bar water pressure and spray nozzle - Electronic control featuring: main power switch On / Off Program selector switch Water / Water + Injection Potentiometer for dowel feed via vibratory feeder Potentiometer for water injection volume Indicator light for minimum water level in water tank - Chassis Hedpfxjwx Aado Abvenl - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DowelJet with option for through-hole processing: 1 unit HoKuTech | DowelJet with expansion kit for GlueJet incl. mounting devices for integration/connection with DowelJet incl. height-adjustable suspension for glue hose/ including: 1 HoKuTech | GlueJet Glue dosing unit for through-hole processing Suitable for PVAc glues up to 75,000 mPas viscosity Incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, galia: 2,18 kW (2,96 AG), kuro tipas: benzinas, spalva: geltonas, darbinė masė: 23 kg, Gamybos metai: 2023, Įranga: UVV saugos patikra, Wacker Neuson BH 55 Petrol Breaker – Demo Machine Wacker Neuson BH 55 Petrol Breaker – Demo Unit | Year of Manufacture: 2023 | 2-stroke WM 80 engine | Power: 2.18 kW | 1,300 blows/min Item number: 5100047063 Technical Data: Manufacturer: Wacker Neuson Model: BH 55 Condition: Demo machine Year: 2023 Operating weight: 22.8 kg Engine: Wacker Neuson WM 80 petrol (2-stroke) Engine output: 2.18 kW (approx. 3.0 HP) Blow rate: 1,300 bpm Starting system: recoil starter Applications: Demolition / Compaction / Construction Accessories: 1x Wacker Neuson pointed chisel Highlights & Features: - Powerful petrol breaker for versatile applications - Robust 2-stroke engine – reliable & high-performance - High impact force for efficient demolition work - Compact design – ideal for mobile use - No electrical connection required – maximum flexibility - Made by Wacker Neuson – proven quality & durability Applications: ✓ Roadworks & civil engineering Hnjdpfx Absy Ipdzovsl ✓ Fibre optic installation ✓ Sewer and pipe laying ✓ Foundation & concrete breaking ✓ Construction companies & municipalities ✓ Horticulture & landscaping ✓ Repair & renovation work Location: Warehouse D-46514 Schermbeck (NRW) – inspection & pick-up possible Delivery: Germany-wide & international on request Pricing: ex-warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices are exclusive of VAT Other models & accessories available! ➡️ Petrol & electric breakers, chisels, trolleys & spare parts Buy Wacker Neuson Petrol Breaker | BH 55 NEW | Year: 2023 | Demolition breaker with WM 80 engine | 2-stroke petrol breaker | Mobile site breaker | Wacker Neuson BH series | Professional demolition hammer | Cordless breaker Your reliable partner for demolition & compaction technology: Claudio Macagnino Construction Equipment & Commercial Vehicles Ltd ➡️ Enquire now & secure immediately available new equipment! On request, we offer virtual machine inspections via video call.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 3,1 kW (4,21 AG), kuro tipas: dyzelinas, spalva: geltonas, darbinė masė: 160 kg, Gamybos metai: 2026, Įranga: UVV saugos patikra, Wacker Neuson DPU 2540 H Vibratory Plate – NEW | 25 kN Centrifugal Force | 400 mm Working Width | Hatz Diesel Engine 1B20 with 3.1 kW Item Number: 5000610035 Technical Data: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating Weight: 160 kg Frequency: 90 Hz Centrifugal Force: 25 kN Working Width: 400 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium Compaction Area Performance: approx. 624 m²/h Hnodpfx Asy Ipckobvol Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – enables precise compaction even in confined areas - Ergonomic guide bar – low vibration & comfortable handling - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving work & medium-sized areas ✓ Landscaping & horticultural construction ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction on small to medium construction sites Options: Extra charges only in combination with the machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. The data is wirelessly transmitted to the Wacker Neuson App and clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery Germany-wide & internationally on request Pricing ex-stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to change and prior sale. Prices plus VAT / VAT excluded More models and sizes available! Also available: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Vibratory Plate 25 kN | 400 mm Working Width | Hatz Engine | Wacker Neuson Compaction Technology | Vibratory Plate for Paving Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! If required, we are happy to offer a virtual viewing of the machine via video call.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 3,6 kW (4,89 AG), kuro tipas: benzinas, spalva: geltonas, darbinė masė: 96 kg, Gamybos metai: 2026, Įranga: UVV saugos patikra, Wacker Neuson WPU 1550 A Vibratory Plate – NEW Wacker Neuson WPU 1550 A Vibratory Plate – NEW | 15 kN centrifugal force | 500 mm working width | Honda GX 160 petrol engine, 3.6 kW | The smallest reversible vibratory plate from Wacker Neuson! Hedpfx Abjy Ipcdovonl Item number: 5100071592 Technical Specifications: Manufacturer: Wacker Neuson Model: WPU 1550 A Condition: NEW Operating weight: 96 kg Frequency: 98 Hz Centrifugal force: 15 kN Working width: 500 mm Engine: Honda GX 160 petrol engine Engine power: 3.6 kW Fuel type: Petrol Start system: Recoil start Compaction class: Light compaction Surface performance: approx. 720 m²/h Highlights & Features: - The smallest reversible vibratory plate from Wacker Neuson - Compact design – ideal for confined workspaces - 500 mm working width – for efficient surface processing - Ergonomic guide bar – low vibration & comfortable handling - Reliable Honda petrol engine – low maintenance & efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving construction & medium-sized areas ✓ Landscaping & horticulture ✓ Municipal use & construction companies ✓ Fibre optic & cable installation ✓ Compaction work on small to medium construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery within Germany & internationally upon request Price ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other models and sizes available! Also in stock: WPU 1550 Aw, WP 1550 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | WPU 1550 A NEW | Reversible Petrol Vibratory Plate 15 kN | Vibratory Plate with Honda Engine | 500 mm Working Width | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Construction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading Ltd. ➡️ Contact us now & secure new stock available immediately! Virtual machine inspection via video call available upon request.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 3,1 kW (4,21 AG), kuro tipas: dyzelinas, spalva: geltonas, darbinė masė: 171 kg, Gamybos metai: 2026, Įranga: UVV saugos patikra, Wacker Neuson DPU 2560 Hts Vibratory Plate Compactor – NEW Hnjdpfey Ipbtex Abvol Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW | 25 kN Centrifugal Force | 600 mm Working Width | Hatz 1B20 Diesel Engine with 3.1 kW Item number: 5000610038 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2560 Hts Condition: NEW Operating Weight: 171 kg Frequency: 90 Hz Centrifugal Force: 25 kN Working Width: 600 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-duty compaction Surface Capacity: approx. 624 m²/h Features & Equipment: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily jobsite use - 600 mm working width – high surface capacity in a compact machine - Ergonomic guide handle – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Typical Applications: ✓ Paving and medium-sized surfaces ✓ Landscaping & horticulture ✓ Municipal and construction company applications ✓ Fiber-optic & cable installation ✓ Compaction work on small to medium-sized construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & pickup possible Nationwide & international delivery upon request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel District) All information without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded Additional models and sizes available! Also available: DPU 3060, DPU 3760 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2560 Hts NEW | Diesel Vibratory Plate 25 kN | Plate Compactor 600 mm Working Width | Hatz Engine | Wacker Neuson Compaction Technology | Plate for Paving Applications Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new stock! We are happy to offer a virtual machine inspection via video call upon request.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 4,2 kW (5,71 AG), kuro tipas: dyzelinas, spalva: geltonas, darbinė masė: 247 kg, Gamybos metai: 2026, Įranga: UVV saugos patikra, Wacker Neuson DPU 3750 Hts Vibratory Plate Compactor – NEW Wacker Neuson DPU 3750 Hts Vibratory Plate – NEW | 37 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Article number: 5000610321 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 3750 Hts Condition: NEW Operating Weight: 247 kg Frequency: 90 Hz Centrifugal Force: 37 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium Compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel plate compactor for demanding compaction tasks - Robust construction – ideal for daily site use Hnodpfxjy Ipbgs Abvel - 500 mm working width – high area output with a compact design - Ergonomic guide bar – low-vibration and comfortable handling - Reliable Hatz diesel engine – powerful and efficient - Made by Wacker Neuson – proven quality & immediate availability Applications: ✓ Paving construction & medium-sized areas ✓ Landscaping & gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable laying ✓ Compaction on small to medium-sized construction sites Options: Surcharges only in combination with the machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally on request Pricing ex-warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices are net of VAT / VAT excluded Further models and sizes available! Also available: DPU 5247 etc. ➡️ New & used equipment, accessories & spare parts Buy Wacker Neuson vibrating plate | DPU 3750 Hts NEW | Diesel plate compactor 37 kN | Vibratory plate with 500 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving construction Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Construction Equipment & Commercial Vehicles GmbH ➡️ Inquire now & secure immediately available new units! On request, we are happy to provide a virtual machine viewing via video call.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 4,2 kW (5,71 AG), kuro tipas: dyzelinas, spalva: geltonas, darbinė masė: 190 kg, Gamybos metai: 2026, Įranga: UVV saugos patikra, Wacker Neuson DPU 3060 Hts Vibratory Plate Compactor – NEW | 30 kN Centrifugal Force | 600 mm Working Width | Hatz Diesel Engine 1B30, 4.2 kW Item No.: 5000610042 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 3060 Hts Condition: NEW Operating Weight: 190 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 600 mm Engine: Hatz 1B30 Diesel Engine Hodpoy Ipbajfx Abvsnl Engine Output: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium duty compaction Surface Performance: Approx. 624 m²/h Key Features & Equipment: - Powerful diesel vibratory plate for demanding compaction tasks - Robust construction – ideal for daily job site use - 600 mm working width – high surface output in a compact design - Ergonomic guide handle – low vibration & comfortable operation - Reliable Hatz diesel engine – high performance & efficiency - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-sized areas ✓ Landscaping & horticultural construction ✓ Municipal & civil engineering works ✓ Fiber optics & cable installation ✓ Compaction work on small to medium construction sites Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery nationwide & internationally on request Ex works: Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to error and prior sale. All prices plus VAT / VAT excluded Further models and sizes available! Also in stock: DPU 3760, DPU 5260 etc. ➡️ New & used machines, attachments & spare parts Purchase Wacker Neuson plate compactor | DPU 3060 Hts NEW | Diesel Plate Compactor 30 kN | Vibratory Plate 600 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Plate Compactor for Paving Work Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Virtual machine inspections via video call available on request.