Rankinė Mašinėlė pirkti naudotą (772)

Sąlyga: paruoštas naudoti (naudotas), Parduodama Hermle CNC universalioji įrankinė frezavimo staklė. Važiavimo eiga X/Y/Z: 700mm/550mm/500mm, stalo matmenys X/Y: 1000mm/500mm, pinolės eiga: 100mm, įrankio tvirtinimas: SK40, apsukos: 3150 aps./min, padavimo greitis: 2m/min, greitoji eiga: 5m/min, maks. ruošinio svoris: 400kg. Staklių matmenys X/Y/Z: apie 3900mm/3300mm/2100mm, svoris: apie 3300kg, valdymas: Heidenhain TNC 150. Galima apžiūra vietoje. Knodpjxwcu Aefx Adved

Sąlyga: naudotas, Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, HECKLER & KOCH - AM 442 Pasiūlymo informacija Sandėlio numeris: 1039-9384 Staklių tipas: Universalios įrankinės frezavimo staklės Gamintojas: HECKLER & KOCH Modelis: AM 442 Metai: 1982 Valdymas: konvencinis Vieta: D-59302 Oelde Kilmės šalis: Vokietija Pristatymo terminas: pagal susitarimą Kedpfext N Rvex Advsnd Transportavimo sąlygos: iš sandėlio vietos Papildoma informacija: Universalios įrankinės frezavimo staklės HECKLER & KOCH - AM 442 MES JUMS SIŪLOME: dirbtuvėse patikrintas stakles pakraunama į sunkvežimį be papildomo mokesčio BE aukciono mokesčio Galimas pristatymas (už papildomą mokestį) iškrovimas ir paleidimas (už papildomą mokestį) Techniniai duomenys X ašies eiga: 390 mm Y ašies eiga: 330 mm Z ašies eiga: 380 mm Valdymas: konvencinis Stalo tvirtinimo paviršius: 850 x 255 mm Maks. stalo apkrova: 200 kg T griovelio plotis: 12 mm H8 T griovelių skaičius: 5 vnt. T griovelių atstumas: 45 mm Frezavimo sūkių diapazonas: 63–2.800 aps./min. Pavarų skaičius: 12 padėčių Prietaisų pastūmos greitis: 0–1.500 mm/min Įrankių tvirtinimas: SK 40 Greitas pastūmos greitis: 1.500 mm/min Staklių svoris apie: 1,9 t Reikalinga erdvė apie: 2,0 × 2,5 × 2,8 m

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, pavaros tipas: mechaninis, ritės vidinis skersmuo: 200 mm, ritės išorinis skersmuo: 800 mm, ritės svoris: 100 kg, ritės plotis: 220 mm, parduodama AMADA ORII rankinė lakštinio metalo ir kabelių vyniotuvė gamintojas/modelis: AMADA ORII ST 02 Z ritinio plotis: maks. 220 mm vidinis ritinio skersmuo: 200–500 mm išorinis ritinio skersmuo: 1100 mm maksimali ritinio masė: 100 kg Ksdsxvitvspfx Advend

Sąlyga: naudotas, Lakštų plotis 2000 mm Knodpfjxfwdzox Adved Lakšto storis 3 mm Galinė atrama su rankiniu valdymu, 750 mm Matmenys apie 2800 x 1120 x 1510 mm Svoris apie 1800 kg Mechaninė rankinė skardos žirklė Pridedama 1 pora atsarginių peilių Mašina buvo naudota iki galo retkarčiais

Sąlyga: naudotas, Skylių štampavimo mašina MUHR & BENDER - MUBEA modelis KL 350 / 203 Mašinos Nr. KL3509864 Pagaminimo metai: 1998 Spaudimo jėga: 35 t Strypo iškyša: 200 mm Stūmoklio eiga: 22 mm Našumas: Ø 28 mm 10 mm storio lape (esant 450 N/mm²) Ø 23 mm 12 mm storio lape (esant 450 N/mm²) Stūmoklio plokštė: 265 x 70 mm Stūmoklio plokštės storis: 25 mm išorėje / 50 mm centre Stalo plokštė: 285 x 250 mm, storis 40 mm Stalo išpjova: 115 x 85 mm Knedpjxf Utaefx Adved Iškritimo anga stalo išpjovoje: 115 x 25 mm Įrenginio aukštis (su stalu ir stūmoklio plokšte): 125 mm Eigos dažnis: vienkartinis smūgis per kojinį jungiklį Variklio galia: 1,5 kW Maitinimas: 400 V, 50 Hz - elektrinis kojinis jungiklis eigos aktyvavimui - rankinė paieškos svirtis stūmoklio judesiui - specialus įrankis kaip štampavimo įrankis Užimamas plotas (I x P x A): 800 x 800 x 400 mm Svoris be įrankių: 340 kg Svoris su įrankiais: 370 kg Gera būklė

Sąlyga: naudotas, Gamybos metai: 2002, 3 bokštai po 8 skyrių Vielinio segimo stotis SPF-20A Priekinio pjovimo trimeris FC-20A 2 segimo galvos 48/5 S 2 žiedinių kilpų segimo galvos Knjdpfsxyfpzox Advod Vibruojantis stalas PJ-77 Kompresorius Rankinė sistema

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 250 mm, veleno skylė: 58 mm, tekėjimo ilgis: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 460 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, centro aukštis: 230 mm, greitas poslinkis X ašimi: 5 m/min, greitasis eiga Z ašyje: 5 m/min, veleno greitis (min.): 40 aps./min, veleno greitis (maks.): 3 000 aps./min, lovos plotis: 300 mm, bendras ilgis: 2 500 mm, bendras plotis: 1 700 mm, bendras aukštis: 1 800 mm, bendras svoris: 1 850 kg, sukimo momentas: 1 012 Nm, X ašies eiga: 210 mm, Z ašies eigos atstumas: 800 mm, ruošinio svoris tarp centrų: 350 g, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: sūkių greitis be galo kintamas, Sūkurio skersmuo virš lovos: 460 mm Atstumas tarp centrų: 930 mm Didžiausias apsisukimų diapazonas: 3000 aps./min. Veleno galia (40/100% darbo ciklo): 14/10 kW (kintamosios srovės pavara) Didžiausias sukimo momentas: 1012 Nm Veleno fiksavimo DIN 55029: Camlock D6 Veleno gręžinio skersmuo: 58 mm Į komplektą įeina, be kita ko: Ksdpfou T Ippsx Advjnd - Siemens AC servo varikliai - Siemens tiekimo ir stiprintuvo moduliai - Rankinis 3 pavarų reduktorius - Plieninis laikiklio galvutė Multifix B tipo - 2 slankiojančiomis durimis uždengta apdirbimo zona ir papildoma griebtuvo apsauga atviram darbui - Iš priekio ištraukiama drožlių dėžė - Rankinė priešgalvis - Sukimosi centras - Aušinimo skysčio sistema

Sąlyga: geras (naudotas), Gamybos metai: 2005, Internal item no.: 24012 Knjdpfxsrywa Rs Advod Universal Milling Machine Macmon M100 NC Year of manufacture: 2005 Control: Heidenhain TNC124 + Coolant pump + Machine vice Travels: X 310 / Y 170 / Z 330 mm Spindle speed: 40–2000 rpm Spindle taper: SK40 Dimensions (LxWxH): 1200 x 1600 x 1850 mm Weight: approx. 1000 kg

Sąlyga: naudotas, Presavimo galia apie 5 t Montavimo aukštis 110 mm Išsikišimas 40 mm Mašinos svoris apie 50 kg Knodpfexr Ravox Advsd Užimamas plotas apie 1,2 x 0,5 x 1,3 m Rankinė tiesinimo presas plokščioms juostoms arba velenams, velenų montavimas tarp centrų ant reguliuojamos apvalios ašies. Tai naudota mašina, todėl parduodame ją be jokios garantijos. SANDĖLIUOJANTIS PREKYBININKAS SU 1600 m² PARODŲ SALE.

Sąlyga: naudotas, Gamybos metai: 1995, x eiga 710 mm y eiga 500 mm z eiga 500 mm Stalo dydis 1000 x 600 mm CNC valdymas TNC 407 Heidenhain Pavaros diapazonas 1-3000 mm/min Greita eiga 6 m/min Įrankio tvirtinimas ISO 40 Sukimosi dažnių diapazonas 20 - 3150 aps/min Pagrindinis pavara DC 7 kW Frezavimo galva pasukama + / - 90° Bendras galios poreikis 15 kW Staklių svoris apie 3,9 t Užimama vieta apie 2,5 x 2 x 2 m CNC įrankinė frezavimo staklės su Heidenhain TNC 407 valdymu. Kedpjxukn Sjfx Advond

Sąlyga: geras (naudotas), Gamybos metai: 1985, Deckel FP1 Aktiv su 3 ašių Heidenhain skaitmenine indikacija, 3 aktyvios ašys, standus stalas, SK 40 M16 veleno laikiklis. Centrinis tepimas, naudojimo instrukcijos. Geros, darbingos būklės, atvežta iš profesinio mokymo centro. Pagal susitarimą galima parodyti veikiančią. Knsdpoxwunzsfx Advsd

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout Original Condition!!! Technical Data: >> Machine No. 56560/08, Year of manufacture approx. 1975 >> Fixed angle table >> Speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and features: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels, and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel onsite under power. Kedpfxju Nvxmj Advond

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, X = 400 mm, Y = 300 mm Knsdpfexwc D Dsx Advjd Pastūmos greičiai reguliuojami be pakopų, Sukimosi greičiai su pakopomis nuo 35 iki 2200 aps./min. Tvirtinimas ISO 40 • Frezavimo galvutė su gręžimo pinoliu • Universalus sukamasis ir pakreipiamas stalas

Sąlyga: geras (naudotas), Internal item no.: 25029 Universal Milling Machine Deckel FP1 3-axis active digital readout (Heidenhain TNC113) Year of manufacture: 1987 Spindle mount: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gear ranges) Feed rate steplessly adjustable. The machine is in well-maintained condition and can be inspected under power at the site. Includes extensive accessories: - Operating manual / electrical schematic / spare parts list - Deckel drawer cabinet Knedpfx Adowvgcdevjd - SK40 tool holders (S20x2) - Steady rest - Coolant pump

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C, Infinitely Variable Feed, in Light Grey – Excellent Condition Knjdpfx Ajt Aav Isdvsd Technical Data: >> Year of manufacture: 1978 Machine No.: 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle support by 100 mm >> Vertical and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout system (K&C), newly installed, with manufacturer's warranty and operating manual. The display unit features: reference points, zero point setting, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered is a universal milling machine Deckel FP1 in excellent condition. The machine has very little backlash and all the spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is infinitely variable on two axes, and the machine is also equipped with rapid traverse. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 Kjdpfjt Aarpex Advsnd >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, like new condition!! Technical data: >> Machine No.: 2101-51084, year 2011 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Knodpfowpi Dqex Advjd Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: Offered is a universal milling machine Deckel FP1 repowered by FPS in like-new condition. Included in the accessories are the hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You have the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power. Ksdpjvb Ud Usfx Advend

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram Knedpfx Aju Racrjdved About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm Knedpfx Aju T D Nrsdvod >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Knsdpfsu Nvwvjx Adved Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: Knsdpfxjxu Hbhe Advsd >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed - TOP Condition Technical Data: >> Year of manufacture: 1979 Serial No.: 2202-10777 >> Fixed angle table (newly planed) >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Traversing paths X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150mm on the column >> Vertical and horizontal quill - SK40 extendable >> Drawbar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis TNC 113 active digital readout by Heidenhain Ksdpfjuc Ubwjx Advond >> Coolant unit >> Central lubrication About the Machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw only limited use. The machine has minimal play in the handwheels, and all spindle movements operate smoothly. Even at maximum speed, the milling machine runs quietly. On this later FP2 model, feed is infinitely variable on all three axes; the machine also features rapid traverse for each axis. A key advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions for the machine to automatically move to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise operation. Take the opportunity to inspect and test this machine under power on site.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power. Kjdpeu R D I Ssfx Advend

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Kedpfxexu E R Is Advond Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.