Purškimo Technika pirkti naudotą (29 991)

Sąlyga: naudotas, Gamybos metai: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational, including all walls/constructions and motors/burners. Nsdpfx Aswrpwvsdusli

Sąlyga: geras (naudotas), We offer spray guns, booths, complete systems, used and reconditioned equipment. Nodpfsri R Rlex Aduoli

Sąlyga: geras (naudotas), Milling Grinder for Plastic Recycling The machine is designed for shredding both soft and hard plastics, such as: plastic bottles, plastic materials like soles, straps, moulded parts, materials with low metal content such as electric wires or electric boards, waste paper, paper, cardboard, as well as rubber compounds. Manufacturer: PRTECHNIKA Model: MF-15 Year of manufacture: 2012 Power: 15 kW, 400V Screen mesh diameter: 6 mm + additional screen with 10 mm mesh diameter Cutting system: 24 rotary knives Cutting chamber: 470x350 mm Feed hopper: 470x300 mm Weight: 1,200 kg Included: large cyclone separator and fan without motor Nlsdpfx Asvzz H Nodusi Technical condition: used machine, operational, good condition, knives undamaged

Sąlyga: geras (naudotas), Gamybos metai: 1998, GEOTECHNIKA XZ 1000/1 3-roller plate bending machine Njdpfjq Ix Anex Aduoli 1000 mm Year of manufacture: 1998 Weight: 200 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Automatic drum-type zinc electroplating line GALWANOTECHNIKA (2018/2021) Technical Data Summary (focus on components and performance): ● Machine type: automatic electroplating line, drum type (Zn – zinc plating). ● Manufacturer: GALWANOTECHNIKA. ● Year of manufacture: main structure 2018, major retrofit in 2021 (fully documented). ● Capacity: approx. 220 tons/month (with 3-shift operation; suitable for nails/small parts). ● Condition: complete, operational, after retrofit assessed as very good. Key components included: ● Zinc plating drums/drum assemblies: 7 pcs. (purchased new in 2021 for plating nails). ● Rectifiers (total 7 pcs.): ○ 6 pcs. with parameters 400A/1700A (year 2017). ○ 1 pc. 800A (year 2017). ● Process/rinse tanks (total 17 pcs.): including tanks for zinc plating, cascade rinsing (3- and 2-station) and passivation (year 2006 – as declared). ● Automation: control cabinet/switchgear (2018), line transporters/hoists (2016). ● Wastewater treatment (LPW-ANLAGEN tanks): scrubber, fan, and complete wastewater treatment station. ● Auxiliary equipment (2021 retrofit): full drip tray made of acid-resistant PE under the entire line, chemical laboratory with equipment. Commercial information: Nedpfx Asxm Ttzedueli ● Documentation: DTR (Technical and Operating Documentation) available.

Sąlyga: naudotas, bakelio talpa: 1 350 l, GENERAL Design: suspended Remarks: Various technical documents available; tanks were previously suspended by the former operator in a ring with load cells, which was embedded in the floor (one ring each is included in the delivery; see photos) Speed: 412 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Total height: 2,650 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Double-jacket volume: 80.0 litres Product-contact surface material: V4A 1.4435 (AISI316) Condition: used Cylinder height: 1,460 mm Last application: pharmaceutical TANK Max. operating temperature tank / °C: 130°C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manway / dome: on tank top Nljdpfx Ajxxiccsduoi Outlet: available Outlet (alternative entry): 50 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted TECHNICAL DATA / DIMENSIONS Top thickness: 4.5 mm

Gamybos metai: 2013, Sąlyga: naudotas, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for residual emptying, degassing, and pre-compacting of PET bottles with volumes from 0.3 to 2.5 liters. The machine is equipped with a chassis and can be driven into and out of the feed chute of your baler. The throughput capacity is approximately 85,000 bottles or about 3 tons per hour. The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Model: R-1200 F (with hopper for inserting and removing the compactor) Year of manufacture: 2013 Nledpfeu Thpnjx Aduei Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Pre-fuse: 40 A Design: Continuous flow system Function: Double-rotor press system Rotor pre-tension: Pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: Single-use and reusable PET bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air supply: G1/2", 8 bar, 40 L/min Compaction ratio: 1:3 Flange dimensions (internal): 972 x 1,220 mm (L x W) Infeed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be positioned in the feed chute of your baler as needed, ensuring residual emptying, degassing, and pre-compacting of bottles and packaging. When changing materials, the PET compactor is simply removed from the feed chute, allowing materials such as paper, cardboard, films, etc., to be compacted without the unit. BOREMA PET Compactor Process: Plastic containers are fed in by two rotating shafts. One shaft is pneumatically pre-loaded with two air bellows and presses the PET bottles against the second rotating shaft with 16 t of force. The sealed plastic containers are compressed, ruptured, and degassed in the process. Residual liquids drain away, and the pre-compacted material drops into the baler. In case of contaminants, the pneumatically pre-loaded shaft yields, allowing the contaminant to pass through without interruption. Key advantages over conventional PET perforators with punch pins or knives: The BOREMA process is considerably more efficient and less prone to wear compared to conventional PET perforators with punch pins or knives. The major advantage is that contaminants (e.g., metal parts, stones, bottles with frozen contents, wood pieces) pass through the pneumatically yielding rotor shaft without interrupting operation or causing major damage. In conventional perforators, pins or knives can break off or become severely jammed with contaminants, requiring shutdown and costly repairs. Notes: Complete documentation (Operating Manual, CE, electrical/hydraulic diagrams) is available. Inspection by appointment is possible. No liability is assumed for technical data or possible errors.

Sąlyga: geras (naudotas), Gamybos metai: 2016, Conveyor System, TGW, nominal width 420 mm, approx. 1,100 m – used – Price ex-works (net): €269,000 dismantled, packaged, and loaded, incl. control system, supports, etc.! Manufacturer: TGW Year of manufacture: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Here is an excerpt from Hall 2: Approx. 42 pcs Type: KRC KingDrive roller conveyors A and T Nominal width (NB): 420 mm Roller pitch: 110 mm Zone length: 990 mm Number of KDRs per zone: 2 pcs Roller type: steel Conveying speed: variable, e.g., 0.47 m/s Acceleration / deceleration: 1.5 m/s² Various versions available As above, only: Approx. 38 pcs Type: KRC KingDrive roller conveyors A and T Zone length: 660 mm As above, only: Approx. 4 pcs Type: KRC KingDrive roller conveyors A and T Zone length: 880 mm 800 mm = approx. 8 pcs 770 mm = approx. 3 pcs 412.5 mm = approx. 1 pc 330 mm = approx. 23 pcs KCS KingDrive infeed/outfeed: approx. 8 pcs 420 mm KCC KingDrive curve conveyors A and T, 90 degrees = approx. 6 pcs Nedpfjwdizrjx Adujli 420 mm 45 degrees: approx. 3 pcs 30 degrees: approx. 2 pcs 55 degrees: approx. 1 pc Roller track length approx. 100 mm = approx. 33 pcs 420 mm, plastic rollers, non-driven Timing belt sorter/diverter K: approx. 5 pcs 420 mm Timing belt transfer unit K: approx. 14 pcs 420 mm, module length: 800 mm PWT pop-up roller transfer: approx. 4 pcs Belt conveyors: approx. 18 pcs BFT2000 GF belt conveyors Nominal width 420 mm

Sąlyga: naudotas, bakelio talpa: 120 l, BENDRA INFORMACIJA Konstrukcijos tipas: vertikalus Pastabos: važiuojamasis rėmas iš V2A nerūdijančio plieno; dangčio spaustuko žiedas trūksta Išorinis skersmuo: 500 mm Vidinis skersmuo: 400 mm Bendras aukštis: 1 200 mm Šildymas / aušinimas: yra Didž. leidžiama darbinė temperatūra: 15 °C Didž. leidžiamas darbinis viršslėgis: 1.0 bar Didž. viršslėgis: 1.5 bar Viršutinis dangtis: nuimamas / atverčiamas viršus Maišytuvas: magnetinis maišytuvas Pastatymo tipas: mobilus rėmas Vieta: Bremen Cilindro temperavimas: dvigubas apvalkalas Tipinė lentelė: Tūris: 120 litrų Dvigubo apvalkalo tūris: 16,0 litrų Dvigubo apvalkalo medžiaga: V2A 1.4301 (AISI304) Gaminio sąlyčio medžiaga: V4A 1.4435 (AISI316) Būklė: naudotas Cilindro aukštis: 750 mm Paskutinis naudojimas: farmacija TALPYKLA Didž. darbinė temperatūra talpykloje / °C: 130 °C ĮRANGA Išleidimo anga (alternatyvus įrašas): 35 mm Nledpfx Aoxqay Njduei MEDŽIAGOS CHARAKTERISTIKOS Išorinis paviršius: šlifuotas Vidinis paviršius: poliruotas MAIŠYTUVO DALYS Maišytuvo padėtis: apatinis dangtis Maišytuvo įranga: variklio / pavarų agregatas magnetiniam maišytuvui nėra

Sąlyga: naudotas, bakelio talpa: 885 l, Location: Bremen Condition: used Volume: 885 liters Vacuum: 1.0 bar Max. overpressure: 3.0 bar Tank Max. operating temperature tank / °C: 130°C Design: suspended/hanging Heating/cooling: available Double jacket volume: 35.0 liters Max. allowable operating overpressure: 6.0 bar Heating/cooling jacket Max. allowable operating vacuum double jacket / tube space / bar: 1.0 bar Max. allowable operating temperature: 140°C Cylinder tempering: half-pipe coil Heating/cooling jacket Bottom tempering: half-pipe coil Insulation: available Insulation Insulation material: mineral wool Internal diameter: 1,000 mm Cylindrical height: 864 mm Technical data / dimensions Bottom wall thickness: 4.5 mm Nsdpfx Aexqamvsdusli Cylinder wall thickness: 6 mm Technical documentation: drawings, various documents Equipment Manhole/dome: in the top head (DN 500) Nameplate: Equipment: crane lugs Equipment Outlet (alternative input): 55 mm Remarks: Previously, the tank was suspended by the previous owner in a ring with load cells, which was embedded in the floor (one ring per tank is included in delivery; see photos); outer diameter in ring approx. 1,540 mm; insulation jacket made of material 1 Last application: pharmaceuticals Product-contacting material: V4A 1.4435 (AISI316) Material properties Tempering system material: V2A 1.4541 (AISI304) Agitator Agitator manufacturer: MAVAG AG Power: 0.55 kW Speed: 416 RPM Agitator: magnetic stirrer Agitator Voltage: 230/400 volts Agitator arrangement: bottom-mounted Agitator equipment: agitator data is from one of the two tanks, the second tank does not have a motor data plate (we assume the agitator specifications are identical); various technical documents for the magnetic stirrers included.

Sąlyga: naudotas, bakelio talpa: 1 300 l, Location: Bremen Condition: used Capacity: 1,300 liters Vacuum: 1.0 bar Max. overpressure: 3.0 bar Tank Max. operating temperature tank / °C: 130 °C Design: vertical Tank Support type: on feet Number of feet: 3 pcs Heating/cooling: available Jacket volume: 80.0 liters Max. allowable operating overpressure: 6.0 bar Heating/cooling jacket Max. permissible operating vacuum jacket / tube space / bar: 1.0 bar Max. permissible operating temperature: 140 °C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Internal diameter: 1,200 mm External diameter: 1,470 mm Cylindrical height: 830 mm Total height: 2,100 mm Technical data / dimensions Bottom plate thickness: 7.5 mm Cylinder wall thickness: 5.7 mm Technical data / dimensions Top plate thickness: 4.5 mm Technical documentation: drawing Equipment Manhole / dome: on top plate (DN 500) Nameplate: Equipment: crane lugs Equipment Outlet (alternative entry): 50 mm Remarks: Various technical documents available Previous application: pharmaceuticals Product-contact material: V4A 1.4435 (AISI316) Material specification Temperature control system material: AISI 304 (V2A) 1.4306 Feet material: stainless steel Agitator Agitator manufacturer: MAVAG AG Power: 1.1 kW Speed: 417 rpm Agitator: magnetic agitator Agitator Voltage: 230/400 Volt Agitator arrangement: bottom-mounted Njdjxqampopfx Aduoli Agitator equipment: Various technical documents for the magnetic agitators

Sąlyga: naudotas, bakelio talpa: 920 l, Location: Bremen Condition: Used Volume: 920 liters Vacuum: 1.0 bar Max. Overpressure: 3.0 bar Tank Max. Operating Temperature (Tank): 130°C Design: Vertical Tank Support Type: Feet Number of Feet: 3 Heating/Cooling: Present Double Jacket Volume: 70.0 liters Max. Permissible Operating Overpressure (Jacket): 6.0 bar Heating/Cooling Jacket Max. Permissible Operating Vacuum (Double Jacket / Tube Side): 1.0 bar Max. Permissible Operating Temperature: 140°C Cylinder Temperature Control: Double Jacket Heating/Cooling Jacket Bottom Temperature Control: Double Jacket Nljdjxqamiopfx Aduoi Insulation: Present Insulation Insulation Jacket: Hermetically welded Insulation Material: Mineral wool Insulation Jacket Material: Stainless steel Inner Diameter: 988 mm Outer Diameter: 1,270 mm Cylindrical Height: 906 mm Overall Height: 2,100 mm Technical Data / Dimensions Bottom Plate Thickness: 6.5 mm Cylinder Wall Thickness: 5.7 mm Technical Data / Dimensions Top Plate Thickness: 4.5 mm Technical Documentation: Drawings, various documents Equipment Manhole / Dome: On top (DN 500) Nameplate: Equipment: Crane lugs Equipment Outlet (Alternative Input): 55 mm Previous Application: Pharmaceutical Product-contacting Material: V4A 1.4435 (AISI 316) Material Characteristics Temperature Control System Material: AISI 304 (V2A) 1.4306 Foot Material: Stainless steel Agitator Agitator Manufacturer: MAVAG AG Power: 0.75 kW Speed: 412 rpm Agitator Type: Magnetic agitator Agitator Voltage: 230/400 V Agitator Arrangement: Bottom-mounted Agitator Equipment: Various technical documents for magnetic agitators

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 291257-100, ĮRENGINIO DUOMENYS Grynoji masė: 23 500 kg / 8 500 kg Hidraulinė sistema – Darbinis slėgis: 231 bar Nodpfx Adjxyizhsujli Elektros duomenys Variklio vardinė srovė: 109 A Valdymo įtampa: 230 V Dažnis: 50 Hz

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 194573, spaudimo jėga: 1 000 kN, varžto skersmuo: 30 mm, įpurškimo slėgis: 2 500 juosta, atvērimo eiga: 500 mm, plokštės ilgis: 570 mm, TECHNICAL DETAILS Clamping force: 1,000 kN First injection unit Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second injection unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Opening stroke: 500 mm Maximum distance between platens: 850 mm Mould height: 350 mm MACHINE DETAILS Dimensions & Weight Nljdpfxexx T Dws Aduoi Dimensions: 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT 2x core pulls (simultaneous operation, adjustable holding pressure) Intermediate stop for hydraulic rotary control CF card drive Interface for central computer Interface for input device Interface for conveyor belt Machine prepared for Multilift Selector unit with connection Installation height extended to 350 mm High wear-resistant screws Connection for air blow-off device 2-color / horizontal-vertical unit Including floppy disks/CF cards - complete documentation/manuals

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Dosage volume: 678 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 560 x 560 mm Platen size: 915 x 915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – Touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum sensing x 1 Nsdpfx Adoxqyk Ieujli Hydraulic core pull x 3 Pneumatic core pull x 3 Hotrunner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – fitted with a system of 3 hydraulically driven variable output pumps Parallel movements Proportional valve on injection unit – precision injection Machine manufactured December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year: 2019 4-axis robot: 3 axes driven by servomotors (electric); C-axis pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10 x 2.20 x 2.30 m All machines offered are commissioned by our technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical testing at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 18,000 h in automatic mode Year of manufacture: 2017 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2,400 bar Metering volume: 113 ccm Njdpfxoxqym Ao Adujli Clamping Unit: Clamping force: 140 t Tie bar distance: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-barless machine, hybrid: energy saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Hot runner control x 16 Reinforced injection units – bimetallic Main motors - 2 x servo motor driven with frequency inverter Proportional valves on injection units – precision moulding Parallel movements Integrated system for pressure quality control by Sensor Kistler – tool pressure monitoring Screw diameter in vertical injection unit: ⌀25 mm – approx. 58 g/PS Optional: original Foboha rotary table available at extra cost Rotary table diameter: 740 mm Robot Sepro Multi Inject 20 Year of manufacture: 2017 3-axis robot: 3 electrically driven servo axes: X, Y, Z (telescopic) Axis travels approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot purchase available at extra cost Dimensions: Weight: 10,300 kg Length/Width/Height: 5.56x1.76x3.46 m All offered machines are started and tested by our service technicians before delivery. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: on request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2400 bar Dosage volume: 113 cm³ Clamping Unit: Clamping force: 140 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - Touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition, the machine operated in a so-called cleanroom Operating hours: approx. 8,000 in automatic mode Total operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Hot runner control x 16 Reinforced injection units – bimetallic Main drives - 2 x servo motors with inverter control Proportional valves on injection units – for precise injection Integrated system for pressure quality control from brand Sensor Kistler – for mould pressure measurement Screw diameter in vertical injection unit: ⌀25 mm – approx. 58 g/PS It is possible to purchase the original Foboha rotary table for an additional charge Rotary table diameter: 740 mm For both injection units, the screw diameter can be replaced with a smaller or larger size Sepro Multi Inject 20 Robot Year of manufacture: 2018 4-axis robot: 4 axes driven by servo motors (electric): X, Y, Z, B (rotation) Axis travel (approx.): X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot can be purchased for an additional charge Nedpfxsxqym Ns Adueli Dimensions: Weight: 10,300 kg Length/Width/Height: 5.56 x 1.76 x 3.46 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dosage volume: 201 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-barless machine Hydraulic core pull x 1 Hardened injection unit – bimetallic Machine was serviced by Engel authorized service Machine with original safety housing for robot and conveyor belt Dimensions: Weight: 7,400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Njdpfexqyn Hox Aduoli Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Engel Insert 80V/80V/100 2F / 2-C Tie-barless Machine, Vertical / Perfect Technical Condition Year of Manufacture: 2007 Injection Unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Dosage volume: 54 cc Nljdpfxsxqypds Aduei Clamping Unit: Clamping force: 100 t Tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control System: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, equipped with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared safety curtains Thermoplastics and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorized Engel service in Germany Dimensions: Weight: 9,400 kg Length/Width/Height: 4.85 x 1.47 x 2.30 m Drive: Pump/Motor: 30 kW All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 117 g Injection pressure: 2500 bar Dosage volume: 139 cc Njdpfxexqyrfo Adueli Clamping Unit: Clamping force: 130 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Controller with hot runner zones x 6 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Integrated system for quality pressure control from Sensor Kistler – tool pressure measurement Injection unit type: Vario – enables use of the unit e.g. for side injection A new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45 x 1.49 x 2.17 m Drive: Pump/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Arburg 270C 500-100 Year of manufacture: 1998 Injection unit: Screw diameter: 20 mm Shot weight: 26 g Injection pressure: 2500 bar Dosage volume: 31 ccm Nlsdpjxqx Ufsfx Adusi Clamping unit: Clamping force: 50 t Tie bar distance: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Control system with hot runner channels Injection unit hardened - bimetallic The machine is equipped with an additional control panel - remote control operation The machine has been regularly serviced by Arburg authorized service Dimensions: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Arburg 370C 600-100 Pagaminimo metai: 1995 Įpurškimo agregatas: Sraigto skersmuo: 30 mm Įpurškimo svoris: 59 g Įpurškimo slėgis: 1550 bar Dozavimo tūris: 70 cm³ Nlodpfxjxqya Nj Aduoi Uždarymo agregatas: Uždarymo jėga: 60 t Stulpų tarpas: 370x370 mm Tvirtinimo plokščių dydis: 570x570 mm Išstūmiklis: hidraulinis Uždarymas: hidraulinis Valdymas: DIALOGICA Papildoma įranga: Oro vožtuvas x 1 Hidraulinis branduolio ištraukėjas x 2 Matmenys: Svoris: 3600 kg Ilgis/plotis/aukštis: 4,30x1,59x2,08 m Pavaros sistema: Siurblys/Variklis: 11 kW Šildymo galia: 4,2 kW Bendra galia: 15,2 kW Visos siūlomos mašinos prieš pardavimą yra paleidžiamos mūsų servisų technikų. Yra galimybė gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti gyvuose techniniuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausą

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 370H 600-100 / Hybrid Machine Nlsdpexqyb Hsfx Adusi Year of Manufacture: 11.2011 Injection Unit: Screw Diameter: 20 mm Shot Weight: 29 g Injection Pressure: 2500 bar Dosage Volume: 31 cc Clamping Unit: Clamping Force: 60 t Tie Bar Distance: 370x370 mm Platen Size: 510x510 mm Ejector: electric Clamping Unit: toggle lever Control System: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Injection unit driven by a servo motor controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68x1.45x2.04 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 370H 600-290 e² / Hybrid Machine Year of manufacture: 03.2012 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Main motor powered by servo motor with inverter – energy-saving The injection unit is driven by a servo motor controlled by an inverter Proportional valve on the injection unit – precise injection Automatic mold height adjustment Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Integrated sorting flap Dimensions: Weight: 3350 kg Length/Width/Height: 4.00x1.46x2.04 m All machines offered are started up by our service technicians before sale. Nsdpjxqyb Tsfx Aduoli It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2006 Injection unit: Screw diameter: 55 mm Shot weight: 594 g Injection pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Tie bar spacing: 710x710 mm Platen size: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel-arranged horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total accumulated operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units – bimetallic Proportional valves on injection aggregates - precise injection Parallel movements Injection unit 1000H Screw diameter: 50 mm Shot weight: 446.8 g Nlsdpfxsxqyhmo Adusi Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions: Weight: 15,000 kg Length/Width/Height: 6.90x1.78x2.34 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request