Promag 30 F pirkti naudotą (52 807)

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 360 mm, Z ašies eigos atstumas: 1 000 mm, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 20 m/min, veleno greitis (maks.): 15 000 aps./min, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 20 m/min, įvesties srovės tipas: trifazis, sukimo momentas: 57 Nm, bendras svoris: 15 000 kg, Įranga: sūkių greitis be galo kintamas, Initial commissioning: 1999 Control system: Heidenhain TNC430 PA with manual control unit Working Areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping Table Length x width x height approx. 4,500 x 2,000 x 400 mm Rodpfxex Ifdkj Ab Ajn T-slots longitudinal 18H12 T-slot spacing 250 mm (zero-point clamping plates and additional clamping devices as shown are not included in the scope of delivery!) Milling Head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear Axis Drives Feed rate X, Y, Z axes: approx. 20 m/min Connection Data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, Weights Required floor space (machine excluding control cabinet): approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional Equipment - 12-position tool changer - Minimum quantity lubrication (external) - TT140 touch probe Condition of the machine Fully functional, machine is supplied without enclosure and must be enclosed by the purchaser in compliance with CE regulations.

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 360 mm, Z ašies eigos atstumas: 1 000 mm, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 20 m/min, veleno greitis (maks.): 15 000 aps./min, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 20 m/min, įvesties srovės tipas: trifazis, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 9 000 aps./min, bendras svoris: 15 000 kg, Įranga: sūkių greitis be galo kintamas, Initial commissioning: 1997 Control: Heidenhain Working areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (depicted zero-point clamping plates as well as other clamping devices are not included!) Redpfx Absx Iugue Aon Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, machine is supplied without enclosure and must be enclosed by the buyer to be CE compliant. Special features: The tool changer, vacuum table including pump, and extraction unit can be purchased for an additional charge, but are NOT included as standard with the machine!

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, apsaugos tipas (IP kodas): IP67, 4 vnt. naudotų magnetinių-indukcinių srauto matuoklių ENDRESS + HAUSER Rsdsxrn Svspfx Ab Aen Modelis: Promag 30F ir 31F Įtampa: 85-260 VAC Galia: 15 VA/W 50-60 Hz - IP67 DN50 ir DN80

Sąlyga: geras (naudotas), Gearbox, spur gear, bevel gearbox, worm gearbox Redpfxewa R Dgo Ab Aen -Manufacturer: Bonfiglioli, gearbox type MVF 30/F -Ratio: i = 60 -Hollow shafts: Ø 11 x 24 mm / Ø 14 x 55 mm -Dimensions: 100/95/H115 mm -Weight: 1.1 kg

Sąlyga: geras (naudotas), Centrifugal pump, high-pressure pump, water pump, multistage vertical centrifugal pump - Drive: 1.5 kW, 2910 rpm - Max. flow rate: 23.6 m³/h - Max. pressure: bar - Max. temperature: 100 °C - Quantity: 1 pump available - Dimensions: 250/300/H755 mm - Weight: 60 kg Redodzrykepfx Ab Aen

Sąlyga: naudotas, rida: 313 680 km, galia: 265 kW (360,30 AG), pirmoji registracija: 04/2014, kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 05/2026, spalva: mėlyna, pavaros tipas: automatinis, emisijos klasė: Euro 6, krovinio erdvės tūris: 16 m³, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, paskutinio kapitalinio remonto metai: 2025, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 12/2026, bendras svoris: 258 kg, bendras plotis: 880 mm, bendras ilgis: 700 mm, įėjimo dažnis: 50 Hz, įėjimo srovė: 16 A, elektrinė saugiklis: 16 A, Kemper F 30 SL spiralinis maišytuvas Nerūdijančio plieno dubuo ir maišymo ranka Miltilių dulkių gaubtas NAUJAS 2 greičiai, 1 laikmatis Tvirta technologija Mobilus įrenginys Tik pas mus DGUV V3 patikrintas Jungtis 400V, 16A-CEE kištukas Atnaujintas naudotas įrenginys su garantija ir aptarnavimu Papildomos galimybės: Priežiūros sutartis Rjdpfxox N S Daj Ab Aon Serviso paketas Mokymai ir paleidimas Daug kitų spiralinio maišytuvų turime sandėlyje!

Sąlyga: paruoštas naudoti (naudotas), Gero F 100-200/12SO aukštos temperatūros krosnis 201101895 - 30 - 3000°C / Žalio laido ilgis: 3,9 m, prijungimo laidas: 3,00 m, naudota, geros būklės, 100 % veikianti, komplektacija pagal nuotraukas Rjdpfxox Erpno Ab Asn

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 528FDF30-81101, Gamybos metai: 2021, veikimo valandos: 220 h, kėlimo aukštis: 5 500 mm, kuro tipas: dyzelinas, akumuliatoriaus įtampa: 12 V, šakių ilgis: 1 200 mm, Tuščiasis svoris: 4 730 kg Kėlimo galia: 3 000 kg Rodpfx Aeray Scsb Asn Statybinis aukštis: 265 cm Priekinės padangos: SE Galinės padangos: SE Transportavimo matmenys (I x P x A): 3,78 x 1,24 x 2,65 Dėl daugiau informacijos kreipkitės į Karl Leitner. Sėdynės mini svirtis, galiniai LED darbo žibintai, MSG75 sėdynė, panoraminis veidrodis, DPF

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, lazerio galia: 30 W, plieno lakšto storis (maks.): 80 mm, aliuminio lakšto storis (maks.): 50 mm, The Durma HD-F 3015 Fiber Laser Cutting System with 30 kW, presented by Durma Maschinen GmbH, is a top-of-the-line fiber laser cutting machine engineered for maximum precision and efficiency in metalworking applications. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH represents quality, reliability, and outstanding customer service. Features: Rjdpfsq Nl T Tjx Ab Ajn - 30 kW / 80 mm mild steel, 50 mm stainless steel - Automatic nozzle centering - Automatic nozzle changer with 26 stations - Servo-driven shuttle table - Focal length distance F300 mm - Conveyor system Technical Data: - Power output: 30 kW - Maximum sheet size: 3,048 mm x 1,524 mm - Maximum sheet weight: 200 kg/m² - Z-axis stroke: 160 mm - Maximum synchronous speed: 170 m/min - Maximum synchronous acceleration: 2.8 G - Positioning accuracy: +/- 0.02 mm - Repeatability: +/- 0.02 mm Product Description of the Durma HD-F 3015 30 kW: Powerful and Efficient: Equipped with a 30 kW fiber laser, the Durma HD-F 3015 delivers outstanding cutting performance and precision across a wide range of materials, including steel, aluminum, and copper. Generous Working Area: With a working area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC Control: The intuitive and precise control system ensures easy operation and optimizes cutting paths to minimize material waste. Automatic Nozzle Changer: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy Efficiency: The laser offers excellent energy efficiency, resulting in lower operating costs. Robust Construction: Engineered for durability and reliability, even under demanding working conditions. Safety: Comprehensive safety features ensure safe operation. Versatility: Compatible with a wide range of laser cutting software solutions, making it suitable for various industries. Durma Maschinen GmbH – Your Reliable Partner: As the manufacturer of the Durma HD-F 3015, we at Durma Maschinen GmbH take pride in our fast and efficient service as well as our comprehensive spare parts supply. With facilities in Münster and Staufenberg, we guarantee 100% availability and rapid response times to ensure our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting requirements. Interested in the Durma HD-F 3015 with 30 kW? Contact us for a non-binding consultation or a customized quotation. At Durma Maschinen GmbH, our team is happy to answer all your questions and help find the best solution for your requirements. We look forward to your inquiry!

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlomas Frey laikiklis K-2/30, beveik naujos būklės, įskaitant 2 pripildymo vamzdelius. Daugiau informacijos pagal užklausą. Yra keli vienetai. Apmokėjimas grynais arba išankstinis apmokėjimas. Rodpow Tm Rzjfx Ab Aen Parduodama tik įmonėms, be garantijos ir atsakomybės.

Sąlyga: naudotas, Gamybos metai: 2008, veikimo valandos: 2 000 h, Usata Fardellatrice Zambelli LFT 30 S/F Produttore: ZAMBELLI, Italia – 2008. Modello: LFT 30 Capacità: 30 confezioni/min Ore di lavoro: solo 2.100 La fardellatrice è adatta esclusivamente per bottiglie in PET da 1,5 – 2,0 – 2,5 litri (confezioni 3×2). Non adatta per bottiglie di volume inferiore. Imballaggio con film termoretraibile senza falda/cartoncino. La macchina è ancora collegata. Conservata in buone condizioni. Descrizione Generale Macchina per l’imballaggio in materiale termoretraibile, a movimento continuo, priva di saldatori. Ultima generazione per livelli di produzione medi e alti. Velocità massima dipendente dal modello, dal tipo di prodotto e dal formato del pacco da realizzare. Caratteristiche esclusive di questa tipologia di macchina: - Nessuna parte meccanica sul lato operatore, garantendo così grande accessibilità. - Parti meccaniche raggruppate sul lato opposto all’operatore, rendendo tutte le operazioni di manutenzione ordinaria e straordinaria più semplici e rapide. Fardellatrice Usata Ampia scelta sia nei formati che nelle versioni. Cambio formato semplice e molto rapido. Svolgimento e taglio film elettronici. Taglio film con lama rotante. Film utilizzabile con spessori da 40μ a 80μ. Possibilità di utilizzare bobine di grandi dimensioni per massima autonomia di lavoro. Tutte le funzioni della macchina sono supervisionate e controllate da computer Zambelli. La macchina è completa di tutte le protezioni, in conformità alle normative di sicurezza vigenti. Configurazioni macchina con possibilità di lavorare su più canali. Ampia gamma di optional, tra cui: computer per l’elaborazione dati di produzione, barra antistatica, lettore stampa, ecc. Il computer è particolarmente utile perché consente anche una pianificazione accurata degli interventi di manutenzione preventiva della macchina. I comandi sono centralizzati su un pannello di controllo integrato. Tutti i motori sono protetti da interruttori magnetotermici automatici. Grande attenzione in fase di progettazione per rendere la macchina semplice da gestire e con facile accessibilità per gli interventi di manutenzione. Tutte le parti meccaniche sono raggruppate sul lato opposto all’operatore, per i seguenti motivi: a) Consentire l’accesso al prodotto con il minimo numero di ostacoli. b) Offrire il massimo accesso per tutte le operazioni di manutenzione ordinaria e straordinaria, rendendole il più rapide e semplici possibile. c) Semplificare enormemente tutte le operazioni sui nastri trasportatori del prodotto, in particolare il cambio del nastro. FLUSSO OPERATIVO LFT 30 S/F I prodotti raggiungono la macchina tramite un nastro di alimentazione posizionato in linea con l’uscita. Un dispositivo apposito divide il numero richiesto di file nelle guide di ingresso. Un sensore a monte dell’alimentazione controlla la quantità di prodotto in ingresso. Se la quantità scende sotto il livello minimo impostato, la macchina decelera progressivamente fino all’arresto. Rodpfsvguwxsx Ab Aen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Ši F&O 03035 laminavimo presas pagaminta 2003 m. Darbinis plotis – 1300 mm, lydymo bloko talpa – 200 kg. Išleidimo volinis transporteris apie 9000 mm ilgio. 2024 m. padavimo transporteris atnaujintas – sumontuotos 4 šluotelės ir infraraudonųjų spindulių kaitintuvai. Apsvarstykite galimybę įsigyti šį F&O 03035 laminavimo presą. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo sritys Presavimas / Laminavimas Rjdpox Tkazofx Ab Asn

Sąlyga: visiškai atnaujintas (naudotas), baterijos talpa: 500 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 627 mm, bendras ilgis: 1 025 mm, bendras plotis: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik water filling system + Includes final discharge cable & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity test protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1210 kg Suitable for the following models and more: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Rjdewzvzyepfx Ab Asn Linde P 250 - 127-00 - vertical change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical change Linde W 20 - 127-06 - top battery exchange Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes available – please inquire. Transport available.

Sąlyga: visiškai atnaujintas (naudotas), baterijos talpa: 465 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 798 mm, bendras ilgis: 1 228 mm, bendras plotis: 478 mm, Tested forklift battery for your lift truck – 80V 3PZS 465 – special battery tray + 1 year warranty + Incl. aquamatic watering system + Incl. end-of-line fuse & REMA 320 connector (other plug types can be fitted on request) + Capacity: min. 90–100% (C5 capacity test protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,228 mm Width: 478 mm Height: 798 mm Weight: approx. 1,210 kg Suitable for the following models and others: Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 Rsdpfxowzvz Hs Ab Asn Common battery sizes available on request. Delivery/transport possible.

Sąlyga: visiškai atnaujintas (naudotas), baterijos talpa: 620 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 784 mm, bendras ilgis: 1 025 mm, bendras plotis: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Including Aquamatik automatic watering system + Including end discharge cables & REMA 320 connector (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1.5 mm (please check, may be a typo) Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Redpfewzvy Nex Ab Aon Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Other common battery sizes available on request. Transportation possible.

Sąlyga: visiškai atnaujintas (naudotas), baterijos talpa: 775 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 784 mm, bendras ilgis: 1 024 mm, bendras plotis: 852 mm, Tested forklift battery for your truck – 80V 5PZS 775Ah – DIN A + 1 year warranty + Includes aquamatic watering system + Includes terminal discharger & REMA 320 connector (other connector types available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,024 mm Width: 852 mm Height: 784 mm Weight: approx. 1,920 kg Suitable for the following models and more: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30 /600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30 /600 S-336-00 Linde E30 H -387 -00/ Hoch Linde E30P - 325-00 Linde E30 SH -1276-00 Linde E35/600H - 388-00 Linde E35 H-/HL - 387-00 Linde E35 P - 337-00 Linde E35 RHL - 387-00 Linde E35 SH-1276-00 Linde E40 - 337-00 Linde E40 C - 388-00 Linde E40 P - 337-00 Linde E45 /C/ 600H - 388-00 Linde K 5231-00 /side Linde P250 - 127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Rodjwzvxropfx Ab Aon Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Other common battery sizes available—please inquire. Shipping available.

Sąlyga: geras (naudotas), The scope of delivery includes: 06x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Internal depth: approx. 955 mm For frame depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.94 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Rodpfxov R T Epe Ab Ajn General information about the item: This item is only offered for collection. Transport or shipping of this item can be arranged at additional cost, which may vary depending on the delivery location and scope of delivery. Please contact us for a specific quotation.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Weishaupt RGMS 30 dual fuel burner Gas+Heavy Oil Output: 2600 kW Year of manufacture: 2008 Viewing by appointment only—please arrange by telephone! Preferred sale to dealers, commercial traders, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Redpfjmnqbwsx Ab Ajn Of course, we can also handle all formalities for you. Loading possible.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration model / Exhibition machine / New machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipper knives: 2 pcs Number of counter knives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pcs Throughput: up to approx. 20 cubic meters/h* Chipping length: approx. 30 mm Chipper drive power: 45 kW or according to agreement Feed roller drive power: 2 x 2.2 kW Operating / control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, material feed S&F chipping machines and drum chippers with horizontal infeed are used in various sectors of the wood processing industry (sawmills, woodworks). The “ATH” series chippers produce high-quality and homogeneous wood chips from residual wood, with a low fine fraction—ideal as premium-grade chips for the pulp industry or as fuel chips for energy generation. Rjdpfx Aew I R Rnsb Ajn Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Flexible application - Custom manufacturing Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Sąlyga: naujas, Gamybos metai: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (such as sawmills and timber plants). Chippers from the “ATH” series produce high-quality, homogeneous wood chips with a low proportion of fines from wood residues, e.g., for use as premium wood chips in the pulp industry or as fuel chips for energy generation. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Infeed height: 200 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipping knives: 2 - 4 pcs Redpfjwbv Ersx Ab Asn - Number of counter knives: 2 pcs - Rotor diameter: 520 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 40 stacked cubic meters/hour (*) - Chip length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 – 4,000 kg *Depending on chip length, main motor kW, number of knives, and feed method Advantages: - Maximum throughput - Low proportion of fines - Low maintenance - Versatile applications - Customized manufacturing Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Sąlyga: naujas, Gamybos metai: 2026, Drum Chipper Series ATH 300 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Rodpfouz Hmxsx Ab Aen Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 205 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 890 mm, 30 vnt. nerūdijančio plieno kabinamų stelažų mėsos brandinimui, anksčiau naudotų kaip chorizo dešrų kabinimo stovas. Šie stelažai gali būti statomi vienas ant kito. Bendri matmenys: 1205 mm ilgis x 1000 mm plotis x 1890 mm aukštis. Rsdpfxex Tg Axo Ab Aon

Sąlyga: labai geros būklės (naudotas), 30 linear meters shelving rack Schäfer Type R3000 Used, as new condition, see photos Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Rjdpfxed Nf Svj Ab Aen Negotiation price: €7,550 net ex stock The offer includes: 24 uprights or frames, 2.5 m, galvanized 144 shelves, 250 kg load per shelf, galvanized 9 cross braces for stabilization 6 shelf levels per bay (additional levels possible at extra cost) Available also with a bay width of 100 cm! Alternative configurations possible. Heights 2.5 m or 3.5 m available. Goods in stock. Transport and installation available upon request. Inspection possible by appointment at any time. Further information available upon request. Over 5,000 linear meters of pallet racking from various manufacturers constantly in stock. (Subject to alterations and errors in technical data, information, and prices as well as prior sale! See our general terms and conditions. All prices excl. VAT ex stock.) Purchase / Sale We are constantly seeking and offering numerous items from various sectors: Clean sweep business clearances Liquidations Fast – flexible – effective! We clear and/or dispose for insolvency administrators as well. Please write to us with a few keywords and we will contact you immediately. To reach our homepage, please click on our logo!

Sąlyga: geras (naudotas), Approx. 30 linear meters of shelving system – Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. Over 300 meters available Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg shelf load capacity, bay width approx. 100 cm Asking price: €2,890.00 net ex-warehouse The offer includes: - 31 uprights/frames, 2.5 m, galvanized - 90 shelves, 100 kg shelf load capacity each, galvanized Rsdpscfhx Tsfx Ab Aen - 10 diagonal cross-braces for stabilization - 3 levels per bay (additional levels available for an extra charge) Other configurations available upon request. Heights available: 2.3 m, 2.5 m, or 3 m. Items are in stock. Constantly over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly upon request. More information available upon request. (Specifications, details, and prices subject to change and prior sale. Please see our GTC; all prices exclude VAT, ex warehouse.) Purchase / Sale: We are always interested in buying and selling a wide range of items from various sectors. To access our website, please click on our logo! - Broom-clean factory clearances - Liquidation of companies - Fast, flexible, efficient! We also clear and/or dispose for insolvency administrators. Send us a brief message and we will get back to you promptly.