Prisma pirkti naudotą (241)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Aukcionas
Aukcionas baigtas
Lombardia
1 501 km
Apdirbimo centras
SCMACCORD 25 FX
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 680 mm, Y ašies eiga: 1 380 mm, Z ašies eigos atstumas: 250 mm, valdiklio modelis: Xilog Maestro, veleno greitis (maks.): 24 000 aps./min, TECHNINĖS DETALĖS
Darbinė X ašies zona: 3 680 mm
Darbinė Y ašies zona: 1 380 mm
Darbinė Z ašies zona: 250 mm
Veleno apsisukimų dažnis: 24 000 aps./min.
Darbo laukų skaičius: 2
Reguliuojamų tašų skaičius: 6, 1 300 mm
Pneumatinių bakelito tašų skaičius: 4
Reguliuojamų siurbimo puodelių skaičius: 3
Gsdpeydmbnsfx Acysip
Įrankių keitimo sistema priekyje: 10 pozicijų
Įrankių keitimo sistema gale: 16 pozicijų
F 12L gręžtuvo galvos vertikalios ašys: 8
F 12L gręžtuvo galvos horizontalios X ašies: 2
F 12L gręžtuvo galvos horizontalios Y ašies: 2
MAŠINOS DUOMENYS
Elektroveržliaraktis: 12 kW, HSK 63F
Vakuuminis siurblys: 250 m³
Valdymas: Xilog Maestro
ĮRANGA
Tecpad mobilusis pultas
Tašinis darbo stalas
Juostinis lazeris virtualiai nulinio taško padėčiai Y kryptimi nustatyti
Prisma KS 5 ašių vertikali elektroveržliaraktis
Įrankių komplektai griovelių darymui
Pro-Speed saugos sistema
Priekinė apsaugos ir saugos sistema
Automatinė tepimo sistema
Mažas skelbimas
Podczerwone
698 km
Sukomplektuotos lentpjūvės (stacionarios)
Stravis Jabłoński
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Stravis sawmill line with Jabłoński automatic edger, fully refurbished – condition as new. The line includes:
1. Log conveyor for logs up to 5m with cascade feeder
2. Track-type chain saw 110 + 90 kW
3. Multi-blade saw (2 x 75 kW), spindle diameter 80mm
4. Roller conveyor, length 6m, with left side prism positioning stop
5. Crosscut saw from 0.8 m to 5 m
Gjdpfx Acsv Iyhfoyoip
6. Reference conveyor
7. Roller conveyor, length 3.5m
8. Powered roller conveyor, 4.5m
9. Powered roller conveyor, length 4.0m, with board discharge mechanism
10. Cross belt conveyor, width 3m, length 5m
11. Cross belt conveyor with paddles, width 2m, length 5m
12. Longitudinal belt conveyor, width 0.4m, length 5m
13. Jabłoński automatic edger
14. Jabłoński gooseneck
15. Cross feeder with board width laser scanner
16. Centering device for edger 17
17. Slab separator
18. Crosscut saw from 0.8 m to 3.0 m
19. Gooseneck
20. Jabłoński automatic stacker
21. Jabłoński non-refurbished crosscut saw
22. Bruks chipper with controls (belt or vibratory chute must be provided)
Installation and commissioning at the client’s site available. Videos of the machine before refurbishment available upon request. Optionally, the line can be set up in reverse or lengthwise configuration. Option to build a foundation for the line. SPECIAL DEAL.
Mažas skelbimas
Lukovica
1 192 km
Apdirbimo centras
SCMRECORD 110ALXLTWNPR
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2010, mašinos/transporto priemonės numeris: AA2/001307, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 25 000 h, X ašies eiga: 6 500 mm, Y ašies eiga: 1 700 mm, Z ašies eigos atstumas: 250 mm, ruošinio ilgis (maks.): 6 500 mm, ruošinio plotis (maks.): 1 350 mm, ruošinio aukštis (maks.): 180 mm, valdiklių gamintojas: NUM, bendras aukštis: 2 750 mm, bendras ilgis: 8 000 mm, bendras plotis: 4 000 mm, stalo ilgis: 6 500 mm, stalo plotis: 1 350 mm, valdiklio modelis: 1040, padavimo ilgis X ašis: 6 500 mm, padavimo eiga Y ašimi: 1 300 mm, padavimo ilgis Z ašis: 1 mm, X ašies padavimo greitis: 6 000 m/min, Y ašies padavimo greitis: 45 000 m/min, padavimo greitis Z ašis: 30 000 m/min, ašies variklio galia: 11 W, nominali (akivaizdi) galia: 15 kVA, greitasis eiga Z ašyje: 30 000 m/min, greitas poslinkis X ašimi: 60 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, veleno greitis (min.): 24 000 aps./min, stalo aukštis: 950 mm, Delovne smeri osi X-Y-Z: 6500 x 1350 x 250 mm
Delovno območje: 6500 x 1250 mm
C-os = 640, B-os = 270
Rezkalna enota PRISMA s 5 interpolacijskimi osmi: X, Y, Z, C, B
Električno vreteno 11 kW, 600–20.000 min⁻¹
Orodni držalo HSK63
Delovna miza s TVN blazinicami in vakuumskimi priseski
Križni laserski projektor na delovni mizi
TVN vakuumski prisesek
Pnevmatske sponke
Orodni magazin za 24 orodij
Vrtalna enota
Vakuumska črpalka 5,5 kW, 250 m³/h
CNC krmilnik NUM, operacijski sistem: Windows XP
Xilog Plus
Giodpfx Ajw Au N Socyjp
Maestro
Teža cca 5450 kg

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Röthenbach an der Pegnitz
1 065 km
Pagalbinis vežimėlis EHK
EstererEHK
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, 1 used Esterer electric auxiliary wagon EHK from a small-scale operation
Track gauge: 790 mm
Height from top of rail to top edge of lower roller: 390 mm
Block support with interchangeable run-on horn and sloped rollers,
liftable chain attachment for prism notch
lateral movement via separate geared motor
operation from the tension carriage
Rotary rollers replaced and newly mounted
Motor newly mounted
Gijdpfx Acjrrwzboyop
Rubber buffers replaced
Mažas skelbimas
Vokietija
1 106 km
CNC apdirbimo centras su plokštelių saugykla
Holz-HerDynestic 7532 10.5 automatic mit Store-Master 511
Skambinti
Būklė: naudotas, Gamybos metai: 2019, Used machine
Year of manufacture: 2019
Equipment and technical data:
- Designed for classic nesting machining with wear plate
- Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles
- Gantry-type carriage
- Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning
- Machining dimensions:
- Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm
- Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm
- Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate)
- Maximum programmable speed
- Vector speed: 128 m/min
- X = 80 m/min, Y = 100 m/min, Z = 25 m/min
- DYNESTIC table:
- Fixed, continuous machining table with grid division
- Continuous grooves in X and Y directions
- Groove spacing: 50 mm
- Includes 25 meters of sealing cord for clamping the wear plate
- Vacuum zones: single-circuit vacuum system
- Drill unit 7877:
- 19 spindles
- Drive power: 1.7 kW
- 13 vertical spindles:
- Individually selectable
- U-shape arrangement
- 5+4 in X and 4 in Y direction
- 32 mm grid
- Max. drill diameter: 35 mm
- Total drill length: 70 mm from mounting end (depending on panel thickness)
- Spindle stroke: 70 mm
- Rotational direction: alternate CW/CCW
- n(max): 1000 - 4400 rpm, infinitely variable
- Mounting: M10 thread, locating seat 11 mm
- Without tools, without collets
- 6 horizontal spindles:
- 2 twin drill spindles in X direction
- 1 twin drill spindle in Y direction
- Mounting: M10 thread, locating seat 11 mm
- Max. drill length: 63 mm from mounting end
- Without tools, without collets
- Milling unit 7842:
- Power: 12.0 kW (S6)
- n(max) = 1000 - 24000 rpm, infinitely variable
- Maximum output at 12000–24000 rpm
- Air-cooled
- With HSK-F 63 tool holder
- With right-hand rising locknut (for right-rotating tools)
- With collet chuck for HSK shank
- Ceramic ball bearings (hybrid)
- Tool weight max. 6 kg (including holder)
- Tools: milling and grinding tools max. Ø 160 mm
- Safety guarding in accordance with CE standards
- Safety fence at sides and rear
- Vacuum pump: 500 m³/h, dry-running
- Personnel safety by light barriers in the front machine area
- Handheld remote control with the following functions:
- Start/stop of machining programs
- Machining cycle speed control
- Reset button
- Manual feed / rapid traverse for all axes
- EMERGENCY STOP
- CAMPUS V7 CAD/CAM software, 1x machine license including:
- CAMPUS NC-HOPS:
- Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology
- CAMPUS MT-Manager
- CAMPUS Workcenter
- CAMPUS DXF interface
- Automatic central lubrication
- Automatic lubrication according to defined intervals
Gsdpfswka Upex Acysip
- Additional sealing against dust via positive pressure in each guide carriage
Mažas skelbimas
Wien
933 km
Pjovimo staklės
HerzogLY300/600
Skambinti
Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, bendras plotis: 360 mm, bendras ilgis: 1 020 mm, bendras aukštis: 500 mm, įvesties srovės tipas: Oro kondicionierius, ruošinio skersmuo (maks.): 25 mm, bendras svoris: 92 kg, įėjimo įtampa: 400 V, Clamping, separating, and face grinding in one operation
The machine features two parallel grinding spindles: one for cutting-off and one for precision face grinding to final dimension.
The desired workpiece length is set to an accuracy of 0.01 mm on the scale.
To open the prism clamp: Move the center lever to the right and insert the workpiece.
To close the prism clamp: Move the lever to the left.
Cutting: Move the left lever upwards.
Finishing: Move the left lever downwards.
To open the prism clamp: Move the lever to the center and right; finished workpiece can be removed.
The grinding wheel can be adjusted and dressed at any time without affecting the pre-set measurement.
Equipped with motor protection, cover switch, and restart protection.
Operation without clamping handle:
The machine is supplied with two stop rulers (300 & 600 mm):
Max. finished workpiece length: 300 mm or 600 mm
Min. finished workpiece length: 54 mm
Workpiece diameter: Ø1-25 mm
Operation with clamping handle (not included in accessories):
Max. finished workpiece length: 60 mm
Min. finished workpiece length: 12.5 mm
Workpiece diameter: Ø1-10 mm
Ejector with cylindrical head: max. size 6
Max. workpiece oversize before machining: 195 mm
Length tolerance: +/- 0.01 mm
Squareness: +/- 0.01 mm
Weight: 92 kg
Dimensions without scale (W x D x H): 430 x 360 x 500 mm
Godeid Iymepfx Acysip
Dimensions with scale (W x D x H): 1020 x 360 x 500 mm
Height with open cover: 950 mm
Cutting disc (without fabric): SGA60P6BR1, Ø180x1xØ31.75 mm
Cup wheel: PA46, Ø100x50x10xØ20 mm
Location: Austria / Vienna
Condition:
New, in-stock machine, 6-month warranty.
Includes the following accessories:
• 1 pc. cutting disc SGA60P6BR1 with flange, pre-mounted
• 1 pc. cup wheel PA46 with flange, pre-mounted
• 1 pc. diamond dresser, pre-mounted
• 1 pc. drive belt, pre-mounted
• 2 pcs. Y-shape face hole spanner
• 1 pc. each Allen key 3 mm, 5 mm, 3/16''
• 1 pc. pin spanner 6 mm
• 1 pc. scale 300 mm
• 1 pc. scale 600 mm
• 1 pc. micrometer screw with scale sleeve
• 1 pc. cleaning brush
• 1 pc. lever
• 1 pc. instruction manual (German)
• 1 pc. wooden transport crate
Mažas skelbimas
Vokietija
1 153 km
Paketinis padėklų vežimėlis 25 t
TILGERT
Skambinti
Gamybos metai: 2002, būklė: labai geros būklės (naudotas), Prism dimensions: 1,200 x 700 mm
Coil weight: 25 t
Stroke: 700 mm
Gijdpfxslimtke Acyjp
Mažas skelbimas
Vokietija
1 153 km
Paketinis padėklų vežimėlis 25 t
TILGERT
Skambinti
Gamybos metai: 2002, būklė: labai geros būklės (naudotas), Prism dimensions: 1,200 x 700 mm
Coil weight: 25 t
Gsdolimqtepfx Acyjip
Stroke: 700 mm
Mažas skelbimas
Wien
933 km
Pjovimo staklės
HerzogLY300
Skambinti
Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, bendras plotis: 360 mm, bendras ilgis: 820 mm, bendras aukštis: 500 mm, įvesties srovės tipas: Oro kondicionierius, ruošinio skersmuo (maks.): 25 mm, bendras svoris: 92 kg, įėjimo įtampa: 400 V, This LY300 Short & Length Grinding Machine is pre-owned but has only been used sporadically. The condition is very good; only paint damage and a scratched machine cover indicate the machine’s age.
From a safety perspective, the machine is equipped with a cover switch that automatically shuts the machine off when the cover is opened. A restart protection feature prevents unintentional restart.
For processing short workpieces, the clamping hand is included with this machine.
We can also offer consumables such as cutting discs and cup wheels.
Application: Rod-shaped workpieces can be cut to length and end-face ground in a single operation. Ideally suited for the production of ejector pins. The machine features two parallel grinding spindles—one for separating and one for face finishing to final dimension.
The desired workpiece length can be precisely set on the scale to an accuracy of 0.01 mm.
Workpiece length without clamping hand:
54 - 300 mm
Workpiece diameter: Ø1-25 mm
Workpiece length with clamping hand (included as accessory):
12.5 - 60 mm
Workpiece diameter: Ø1-10 mm
Ejector pins with cylindrical head: max. size 6
Max. workpiece stock size before machining: 195 mm
Length tolerance: +/-0.01 mm
Squareness: +/-0.01 mm
Weight: 92 kg
Dimensions without scale (W x D x H): 430 x 360 x 500 mm
Dimensions with scale (W x D x H): 820 x 360 x 500 mm
Height with open cover: 950 mm
Cut-off wheel, fibreless: SGA60P6BR1, Ø180x1xØ31.75 mm
Cup wheel: PA46, Ø100x50x10xØ20 mm
Location: Austria / Vienna
Including the following accessories:
• 1 pc. cut-off wheel SGA60P6BR1 with flange, mounted
• 1 pc. cup wheel PA46 with flange, mounted
• 1 pc. dressing diamond, mounted
• 2 pcs. Y-face spanner
• 1 pc. hex key 6 mm
• 1 pc. scale 300 mm
• 1 pc. micrometer screw with scale sleeve
• 1 pc. lever
• 1 pc. operating manual, German
Operating procedure:
Open prism clamp: move lever in the middle to the right and insert the workpiece
Close prism clamp: move lever to the left
Cutting: move lever up left
Finishing: move lever down left
Open prism clamp: move lever to the center and to the right; remove finished workpiece.
Gijdpexwp A Hjfx Acyep
The grinding wheel can be adjusted and dressed at any time without altering the set dimension.
Mažas skelbimas
Vokietija
999 km
Juostinis pjūklas - vertikalus
HESKASB4
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Volelio skersmuo 420 mm
Išnėša 400 mm
Ruoinio aukštis 280 mm
Juostos ilgis 3200 - 3400 mm
Stalas - pasukamas +/- 20°
Stalo montavimo paviršius 600 x 600 mm
Stalas - palenkiamas +/- 45°
Bendras didžiausias poreikis 1,7 kW
Staklių svoris apie 0,5 t
Užimama vieta apie 1 x 0,7 x 1,9 m
Ši juostinė pjūklas yra geros būklės, iškart prieinama ir gali būti apžiūrėta veikiančioje būsenoje pas savininką.
Aprašymas:
Techniniai duomenys:
- 2x kampiniai prismės
- Volelio skersmuo 420 mm
- Išnėša 400 mm
- Didžiausias pravažiavimo aukštis 280 mm
Gedpfxsxcp Sfj Acysip
- Stalo dydis 600 x 600 mm
- Stalas pasukamas 2 plokštumose ± 45° ir ± 20°
- Stalo aukštis nuo grindų apie 975 mm
- Pjūklo juostos ilgis 3200 - 3400 mm
- Skaitmeninis ekranas su bepakopiu juostos greičiu 10 - 260 m/min
- Oro kompresorius
- Variklis 400 V / 0,9 / 1,7 kW
- Svoris apie 500 kg
- Užimama vieta apie 750 (pl) x 1950 (a) x 1150 (g) mm
Mažas skelbimas
Goldenstedt
1 043 km
Vizuoti
RÖHMUZ Gr. 4
Skambinti
Būklė: naudotas, Jaw width 160 mm
Gsdjd Ih N Rjpfx Acyeip
Clamping force 24 kN
Machine weight approx. 31 kg
Mechanical centric vise,
low-profile design
With prism jaw and standard jaw SBO size 4
Including rotary base with gradation
Mažas skelbimas
Emmendingen
1 353 km
Aliuminio ir plieno pjovimo staklės
RohbiRKA72
Skambinti
Būklė: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024
PLC control: Siemens S7
Saw blade diameter: 60 – 250 mm
Motor power: 1.5 kW
Saw blade feed: 0-20 mm/min
Cutting speed: 15 - 170 m/min (steel)
630 – 1885 m/min (non-ferrous metals)
Max. working area: 70x40 mm (steel)
Max. working area: 60x40 mm (non-ferrous metals)
Round material working range: 5 - 70 mm (steel)
Round material working range: 5 - 50 mm (non-ferrous metals)
Feed length: 5 - 500 mm
5-9999 mm (multiple stroke)
Max. feed rate: 500 mm/sec
Weight (saw) approx.: 610 kg
Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm
Gedpfxjuiy I Ae Acysip
The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed:
- Conversion to Siemens S7 PLC control
- Upgrade to Siemens HMI operator panel
- Replacement of pneumatic feed and ball screw
- Replacement of servomotor and servo drive
- Replacement of frequency converter for main saw drive
- New electronic components
- New pneumatic lines
- Servicing/replacement of all pneumatic cylinders and valve terminals
- Optimization of extraction system
- Servicing of central and minimal lubrication systems
- Replacement of general wear parts
- Overhaul of machine bed
The machine is additionally equipped with:
- Minimal lubrication for superior cutting quality
Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances.
Warranty:
Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty.
Options:
- Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm)
- 1000 mm feed unit
- 2000 mm feed unit
- 4 m inclined magazine
- 6 m inclined magazine
- Servo-controlled material feed
- Servo-controlled saw feed
- Conversion to prism jaws (60°) for high-volume clamping of round materials
- Discharge system
- Delivery and installation at your facility
- Training for your staff
Mažas skelbimas
Ubstadt-Weiher
1 233 km
Įrankių frezos
MacmonM 100 NC
Skambinti
Būklė: naujas, Gamybos metai: 2025, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 165 mm, padavimo ilgis Z ašis: 280 mm, X ašies eiga: 310 mm, Y ašies eiga: 170 mm, Z ašies eigos atstumas: 330 mm, plunksnos brūkšnys: 70 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 40 aps./min, bendras svoris: 730 kg, Dear Sir or Madam,
We are pleased to offer you the Macmon M100 NC.
This is a real all-rounder, ideal for training and small series production. The Macmon combines a conventional base with a Heidenhain TNC128 CNC path control, making this model an absolute must-have in certain working environments.
And best of all: with a footprint of just one square meter, this machine fits into any workshop!
Technical standard specifications:
Gijdpfxox H Nw So Acyjp
• Heidenhain TNC 128 control (integrated in the operator panel)
• Ribbed cast iron construction with hardened and ground guideways on both column and support
• Vertical head swivels 360º
• Extendable quill, stroke 70 mm
• Removable vertical head for changing between vertical and horizontal milling operations
• Prism guides on all axes
• Ground leadscrew on all axes
• Mechanical tool clamping for both vertical and horizontal spindle
• Tool holder ISO 40 for tools as per DIN 2080 AT 3 with pull stud thread S 20 x 2 or M 16
• Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm)
• Vertical clamping surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm)
• HEIDENHAIN linear position measuring system, direct, resolution 0.001 mm
• Positioning accuracy 0.02 mm, repeat accuracy 0.005 mm
• Horizontal milling device, console and end support
• Chip tray, blue RAL 5019
• Paint finish: blue RAL 5019, grey RAL 7035
• 1 operating manual
• 1 programming instructions CD for TNC 128
• 1 inspection report and basic wiring diagram
• 1 hand-operated oil pump
• With counter bearing, bearing sleeve ø 16 mm (sliding bearing) for milling arbor length 230 mm
• Machine lamp
• Chip guard (protective device required as per EN 13128 for EU countries)
Mažas skelbimas
Denkendorf
1 095 km
Koordinačių matavimo mašina
ZeissPrismo
Skambinti
Gamybos metai: 2002, veikimo valandos: 174 238 h, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 115330, Technical Data
Manufacturer: ZEISS
Model: PRISMO 7
Serial Number: 118103
Operating Hours: 174,238
Measuring Range
X = 900 mm
Y = 1200 mm
Z = 700 mm
Length Measurement Uncertainty
E0-MPE = 1.5 µm + L / 350 µm
The machine can be upgraded with new accessories according to customer requirements.
Price: on request!
Godpfx Aoiq Nuzocyeip
Installation and commissioning available!
We will be happy to provide you with a detailed offer.
Please note: Our offer is directed exclusively at professional buyers.
(Subject to technical changes, errors, misprints, and prior sale!)
Mažas skelbimas
Vokietija
1 104 km
CNC apdirbimo centras su automatika
Holz-HerDynestic 7521
Skambinti
Būklė: naudotas, Gamybos metai: 2012, Used Machine
Year of manufacture: 2012
Base Machine - Dynestic 7521 20.6 Dynestic Table
For conventional nesting operations with wear plate
Processing length: 6250 mm
(DYNESTIC 20.6 includes an additional 4th stop in Y direction)
Welded steel machine frame
with ground and hardened prism guides for the gantry,
aggregate head, and consoles
Gantry design
Helical rack and pinion drive in X and Y axes,
ball screw drive in Z-axis for precise positioning
Technical Data:
The technical specifications refer to the DYNESTIC 7521 - 20.6
Please refer to the respective data sheets for more information.
Processing Dimensions:
Max. workpiece size for contour trimming:
X = 6250 mm
Y = 2100 mm
Max. travel range:
X = 7360 mm
Y = 2720 mm
Z = 325 mm
Max. clearance height, DYNESTIC table:
Z = 1st level 318 mm / 2nd level 418 mm
measured from top of table (without tool, without holder)
Maximum programmable speed:
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min
4-stage extraction hood
with pneumatic height adjustment and inspection window
Voltage: 400 V, 50/60 Hz
CONTROL SYSTEM:
Dual-core processor
Operating system: Windows XP
80 GB hard drive / 1 GB RAM
RJ45 network port 10/100 Base-T Fast Ethernet
US keyboard and Microsoft IntelliEye optical mouse
CD-ROM / CD-RW drive (CD burner)
Remote maintenance
Integrated network card for transferring control and program data.
Data transfer is via high-speed internet connection
Requirement: high-speed internet connection at the machine.
DYNESTIC Table
Rigid, continuous processing table with grid pattern,
continuous grooves in X and Y direction,
groove spacing 50 mm
with 25 meters of sealing cord for clamping the wear plate
1 processing field with stop rails / stop
Height 30 mm, pneumatically retractable
2 stop rails in Y direction and 1 stop in X direction on the right
(viewed from the front of the machine)
Vacuum zones
Single-circuit vacuum system
Drilling unit 7976, 24 spindles
Drive power: 3.0 kW
18 individually selectable vertical spindles
L-shaped arrangement, 10 in X and 8 in Y direction
32 mm center distance
Max. drill bit diameter: 35 mm
Total drill bit length: 70 mm from mounting end (dependent on panel thickness)
Spindle stroke: 70 mm
Rotation direction: alternates between right and left
Gjdow I U Ecspfx Acyeip
n(max.) 1000 - 5710 rpm, stepless adjustment
Mounting: M10 thread - 11 mm fit
without tool or holder
6 horizontal spindles
2 double drilling spindles in X direction
(32 mm spacing between 1st and 2nd horizontal drilling spindle)
1 double drilling spindle in Y direction
Mounting: M10 thread, 11 mm fit
Total drill bit length max. 70 mm from mounting end
without tool or holder
Free space 1 for:
Optional double drilling spindle in X direction
or
Vertical adapter with double feed force
Free space 2 for:
Optional saw in X direction
or
Vertical adapter with double feed force
Milling unit 7831, 2-stage
Power: 11.0 kW (S6)
n(max.) = 1000 - 24000 rpm stepless, two-stage feed stroke
Max. output at 12000 rpm to 24000 rpm
air-cooled
with HSK-F 63 tool holder
with right-hand rotation
Mažas skelbimas
Mindelheim
1 215 km
Hidraulinis dirbtuvių presas
MIOTAL®WHP 200
Skambinti
Būklė: naujas, Technical data:
Capacity: 200 t
Installation height: 900 mm
Maximum working area: 1300 x 450 mm
Piston stroke: 400 mm
Advance speed: 6.4 mm/s
Return speed: 11.04 mm/s
Motor power: 7.5 kW
Width: 2,100 mm
Depth: 1,200 mm
Height: 2,850 mm
Weight, approx.: 2,600 kg
Equipment:
- Laterally adjustable cylinder via rack and pinion with handwheel
- Generously sized working area
- Height-adjustable table
- Torsion-resistant design with welded steel construction
- Pressure gauge
- Fine pressure adjustment
- Additional hand pump
Your benefits:
- One of the heaviest-duty designs on the market
- Available with capacities up to 500 tons
- Maximum performance and stability
- Different frame widths available upon request
- Hydraulics cylinder can be freely positioned horizontally, handwheel, rack and pinion (from 160 t)
Available with special equipment:
- Fine pressure adjustment
- PLC control
- Worktable with T-slots for clamping irregularly shaped components
Giodpfx Aepl T Dijcyep
- Lateral hydraulic cylinder adjustment
Support prisms available at extra cost.
Mažas skelbimas
Suffolk
1 551 km
Juostinis maišytuvas, 75 litrai
Prism Pharma MachineryPRB 50
Skambinti
Būklė: labai geros būklės (naudotas), Prism Pharma Machinery juostinis maišytuvas. Vakuumo parinktis. Puiki būklė. Tiesiai iš bandymų įrenginio.
Giedpox Axbcofx Acysp
Mažas skelbimas
Burbach
1 162 km
H 6.11.10 "Hirschmann" įrankių spaustuvai
Werkzeugspanner HirschmannH 6.11.10
Skambinti
Būklė: labai geros būklės (naudotas), H 6.11.10 Hirschmann tool clamp
Gsdew E Hguepfx Acyoip
Used, in very good condition
3 units available
For installation in C-axes. Connection for compressed air and flushing from above.
The rear side of the clamp is ground as an alignment surface, parallel to the centering prism.
Positioning or repeat accuracy:
Mažas skelbimas
Obertraubling
1 055 km
PRESS STABDYS
WeinbrennerWPS SERVO 20050
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, The environmentally friendly CNC servo press brakes from WEINBRENNER, WPS series, represent a significant improvement over previous standard hydraulic machines.
Up to 60% energy savings and higher angle accuracy.
The tool holder system is compatible with AMADA, as are the tools.
The rigidity of the press is optimized by the closed frame construction.
To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (WILA).
Technical Data:
Maximum press force: 50 tons
Bending length: 2040 mm
Table width: 60 mm
Table width with WILA lower tool: 90 mm
Table height from floor: 930 mm
Daylight opening: 590 mm
Maximum stroke: 300 mm
Approach speed: 150 mm/sec
Pressing speed: 10 mm/sec
Return speed: 150 mm/sec
Max. backgauge travel (X axis): 750 mm
Max. backgauge travel (R axis): 160 mm
Backgauge travel speed on X-axis, servo motor: 330 mm/sec
Backgauge positioning accuracy: +/- 0.03 mm
Motor power: 2 x 5.5 kW
Gijdpsth U Edofx Acyep
Equipment / Standard accessories:
- CNC control unit "ESA S875-2D". This enables easy graphical programming of products. At the push of a button, the control calculates the bending sequence and all axis positions (including collision warning), 15" TFT color display touchscreen, USB interface, network capability, tool library for 50 punches and dies each. Graphical 2D programming, 2D display during operation, up to 4 axes + auxiliary functions.
- Heights and side-adjustable arm in 2 axes for ergonomic and convenient CNC operation.
- Segmented upper tool, Amada system, made in Italy, material C 50 (HRC 50-52), induction hardened and ground at work surfaces. Load capacity: 100 t/m. Standard supply: Segmentation: 2 x 835 mm, left and right horn of 100 mm each, rest in smaller segments. Height 66.6 mm.
- Lower tool / 4-way prism block CroMo 4, ground 60x60 mm, standard V-openings: 16 - 22 - 35 - 50 mm
- 2-axis backgauge "X - R", AC servo motors, travel range: X = 0 mm, R = 160 mm, positioning accuracy +/- 0.03 mm, travel speed: 330 mm/sec. Includes three laterally adjustable stop fingers.
- FIESSLER laser safety device with dual beam, type AKAS/LCII, operation of the press possible only via foot pedal.
- Automatic motorized table crowning, WILA system, integrated into the CNC
- Front sheet metal supports (2 pcs), laterally movable via linear guides, height adjustable via handwheel. Equipped with wide brush supports.
- German operating manual with spare parts list
- CE compliance
Mažas skelbimas
Günzburg
1 193 km
Įrankių šlifavimo staklės - Universal
DECKELS11
Skambinti
Būklė: naudotas, Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, šlifavimo disko skersmuo: 125 mm, bendras svoris: 520 kg, tvirtinimo įvorės skylė: 25 mm, šlifavimo veleno greitis: 500 aps./min, galia: 1,1 kW (1,50 AG), įėjimo srovė: 20 A, įėjimo dažnis: 50 Hz, paskutinio kapitalinio remonto metai: 2021, Įranga: sūkių greitis be galo kintamas, Grinding diameter – max. 238 – 620 mm
Giodpjw U Ehzjfx Acyep
Grinding length 190 mm
Workpiece length 380 – 940 mm
Spindle speeds – infinitely variable 2 – 10,000 rpm
Power supply 380 kVA
Drive power – grinding motor 1.1 kW
Total power requirement 2.2 kW
Machine weight approx. 0.6 t
!!! We stock almost all spare parts for Deckel S 11 machines !!!
!!! Accessories can be configured as required !!!
We are happy to accept your used Deckel S 11 as a trade-in – contact us!
NOTE:
We are pleased to prepare a free quotation for you. However, please
understand that we only process inquiries with complete address details.
DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE
1218
400 V, 50 Hz, with CEE plug and cable
Colour: light grey RAL 7035
Stand traffic grey RAL 7042 (newly painted)
Axial grinding spindle adjustment
Accessories:
* Machine stand and mounting plate ground
* Complete electrical retrofit includes:
> new three-phase drive
> new brake motor
> new frequency inverter
> new touch-safe built-in electrics
> FI circuit breaker
> EMC cables and fittings
> new protective cables
> new control panel
> emergency stop switch
* Optoelectronic measuring device with microscope, support arm, rest station,
new 2-axis Fagor digital readout and scales fully installed and calibrated
* Index head Sk 40 with support prisms and 24 R indexing plate
* 1 each indexing plate 14 + 22 R
* Spiral and clearance grinding unit with rack housing
* Setting gauge
* Complete tooth support
* Swiveling support finger
* LED lamp Waldmann
* Dust extraction unit without vacuum
* Universal setting gauge
* 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25 mm
* Collet sleeve with knockout nut
* 1 set = 35 collets S 20x2 from 1.0 – 18.0 mm in 0.5 mm increments
* 1 each taper reducer sleeve SK 40 x MK 1/2/3/4
* 3 grinding wheel flanges L 48, 35 mm
* Protective cover
* Replacement grinding spindle
* Tool cabinet with 4 drawers
* Shelves for above
* Operating key, operating manual, spare parts list, circuit diagram
* Machine and accessories fully overhauled and supplied with electrical test report!
* 12 months warranty (domestic)
Mažas skelbimas
Stockstadt am Rhein
1 199 km
Lovų frezavimo staklės
KRAFT BFM 30, X-Weg bis 5m, teils ab Lager
Skambinti
Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Discover our selection of robust and precise bed-type milling machines!
Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and overhauled bed-type milling machines. Our machines offer X-axis travels from 1,500 to 5,000 mm and are available with Heidenhain or Siemens controls. With Y and Z travels up to 1,200 mm, you have limitless possibilities. Some overhauled machines are in stock and available at short notice!
Explore our extensive range of special accessories, such as universal milling heads, tool changers, and much more to further enhance the versatility of your bed milling machine. Whether for complex workpieces or demanding tasks, our machines consistently deliver the best results.
Rely on our many years of experience and let’s optimize your machining processes together. Invest in quality and precision—contact us today! Below you will find a selection of possible machine types; we are also happy to offer additional models or special machines upon request:
MAIN TECHNICAL DATA: BFM series including BAFA grants starting from 15% or more!
- X-axis travel 1,500–5,000 mm
- Y-axis travel 1,000 mm
- Z-axis travel 950 mm (up to 1,500 mm optional)
- Max. table load 5,000 kg
- Spindle taper SK 50
- Spindle speed 3,500 rpm (5,000 rpm optional)
- Spindle drive 15/18.5 kW (22/26 kW optional)
ACCESSORIES: Manual universal head, Siemens or Heidenhain control, linear scales on X-Y-Z axes, chip conveyor (screw type front/rear) and much more. Comprehensive special accessories available on request to further enhance productivity:
Gjdpfx Acopwn Hhsyoip
CURRENTLY AVAILABLE OVERHAULED MACHINES with warranty and BAFA funding, e.g.
- CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,000 / 800 / 800 mm, manual milling head, and more.
- CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,500 mm, automatic universal head UAD (0.1º increments), 6,000 rpm, and more.
- CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing differential head UAD (0.1º increments), 6,000 rpm, automatic tool changer (30 tools), and more.
- CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing milling head UDG40 (2.5º increments), and more.
- CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 800 / 800 mm, manual milling head, and more.
- NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, extended manual milling head (UL40), and more.
- CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, universal milling head with automatic indexing UDG (2.5º increments), automatic tool changer (ATC30), and more.
Further models available from stock or at short notice. Contact us now and discover the world of innovative bed milling technology!
Our service for you:
• On-site consultation and solution finding
• Organization of machine transport to your facility
• Placement, installation, commissioning, and hand-over ready for operation
• Financing and assessment of grant opportunities with KFW, BAFA, and more.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Metzingen
1 242 km
Tiesinimo presas - dviguba kolona
JENNYRZ- 205-3-600
Skambinti
Būklė: naudotas, Gamybos metai: 1990, Pressure 3 t
Outreach 0 mm
Stroke 200 mm
Total power requirement 15 kW
Machine weight approx. 4 t
Space requirement approx. m
JENNY - Switzerland, Automatic Double Column Straightening Press
Model RZ - 205 / 3 - 600, Year of manufacture 1990, serial no. 86 596
_____
Upper ram pressing force 3 t
Ram stroke approx. 200 mm
Max. installation height 500 mm
Gijdpfjt Hw Amox Acyop
Max. clamping length of workpiece 600 mm
Height of centres above table approx. 210 mm
Ram speed down 0.17 mm/sec
Ram speed up 0.02 - 0.17 mm/sec
Pump drive 15 kW
Total drive approx. 20 kW - 380 V - 50 Hz
Weight approx. 4,000 kg
Accessories / special equipment:
Machine without automatic workpiece feed, parts (shaft-shaped) are manually inserted, acrylic glass sliding cover in front of the working area, manually operable
Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but has connection options for up to 7 measuring points. These can be adjusted lengthwise on the lower press table within a range of approx. 500 mm, the straightening punch can be adjusted on the upper ram via a prism guide.
2 tailstocks movable on the press table up to a max. clamping length of 600 mm, left side motor-driven and with clamping quill, right side with indexing disc.
Workpiece rotation via stepper motor from 10 to 100 rpm
2 workpiece supports (prisms) left and right for placing the workpiece
The workpiece is measured at predefined positions and straightened accordingly, the straightening process is monitored and controlled by the measuring system, straightening stroke control for preset ram stroke.
Left tailstock powered
Original JENNY process control (FMS) in separate control cabinet with screen and keyboard, parameter input,
Mažas skelbimas
Metzingen
1 242 km
Vienos kolonos presas - hidraulinis
DUNKESHZS 75
Skambinti
Būklė: naudotas, Gamybos metai: 1992, Pressure: 75 t
Throat depth: 280 mm
Stroke: 303 mm
Total power requirement: 15 kW
Machine weight: approx. 7,000 kg
Giodot Hwrzepfx Acysp
Space requirement: approx. m
Hydraulic single-column press, Type HZS 75
Year of manufacture: 1992 Serial no.: H 92-2249
Upper ram pressing force: 75 t
Table size: 750 x 515 mm
Table height above ground: 820 mm
Through hole in table: 300 x 200 mm
Max. installation height: 500 mm
Throat depth: 280 mm
Upper ram stroke approx.: 303 mm
Ram area: 500 x 400 mm
Ram bore: 50 mm
Total drive approx.: 15 kW - 380 V - 50 Hz
Weight approx.: 7,000 kg
Total machine height: 3,850 mm
Accessories / Special equipment:
- DUNKES program control, type PC 10, with data input panel for pressure setting, pressure/time switchover, up/down stroke, rapid traverse and working speeds, as well as digital display of pressing force, ram travel, pressing time, program number. Storage for up to 30 tool programs, SIEMENS S5 PLC, teach-in button.
- Press ram guided via adjustable prism strips.
- Hydraulic shock absorber for blanking mounted in the press cylinder, 15 mm.
- Motorised depth stop and blanking shock absorber adjustment.
- Double sheet detection = maximum pressing force only reached after the preset travel distance.
- Hydraulic tool clamps (4) on table, hydraulic pin clamping in ram, hydraulic ejector in ram, 3 t/15 mm.
- Two-hand safety release, electric and infinitely variable return stroke limitation.
- Overrun monitoring devices NKS, ram switchover of the upper cylinder.
- Mounted control cabinet, connection to oil cooler, etc.
Mažas skelbimas
Metzingen
1 242 km
Siūlų sukimo mašina
WALDRICH COBURG16 GLS 25-90
Skambinti
Gamybos metai: 1985, būklė: naudotas, Workpiece diameter: 25–90 mm
Thread length: 3,000 mm
Thread pitch: 2–16 mm
Total power requirement: 25 kW
Machine weight approx.: 10.5 t
Space requirement approx.: m
O F F E R
We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation.
WALDRICH COBURG
Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components
Model: 16 GSL 25-90 / 3 m
Year of manufacture: 1985
Giodetzdyzspfx Acyjp
_____
Thread diameter: 25 – 90 mm
Max. thread length: 3,000 mm
Thread depth:
Pitch range: 2 – 16 mm
Pitch angle max. up to Ø 55 mm: 15°
Pitch angle max. descending up to Ø 90 mm: 8°
Whirling head speed, stepless: 285 – 1,700 rpm
Workpiece speed: 0.5 – 68 rpm
Bore diameter of clamping spindle and tailstock: 90 mm
Whirling head drive: approx. 4 kW
Total drive approx.: 25 kW – 380 V – 50 Hz
Weight: approx. 10,500 kg
Accessories / special features:
• Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support.
• Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool.
• Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide.
• Simple indexing unit for whirling multi-start threads.
• Additional setup for whirling threads longer than the centre distance with intermediate support.
• For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system.
• Motorized tailstock adjustment with automatic stop by contact pressure sensor.
• Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools.
• Central lubrication, coolant system, separate control cabinet, operating manuals.
The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!
Mažas skelbimas
Metzingen
1 242 km
Šaltojo valcavimo mašina
EX-CELL-OXK 225
Skambinti
Būklė: naudotas, Gamybos metai: 1987, Maximum rolling pressure: NA t
Workpiece diameter: 38 mm
Workpiece length: 500 mm
Total power requirement: 24 kW
Machine weight approx.: 10 t
Space requirement approx.: m
Max. stroke of tool slide, upper/lower: 760 mm
Max. rack length approx.: 610 mm
Workpiece length between centers approx.: 500 mm
Max. gear width/profile width: 92 mm
Max. workpiece Ø: 38 mm
Tailstock stroke on the boom, hydraulic approx.: 500 mm
Module range from/to: 0.3 to 1.3 module
Total drive approx.: 24 kW - 380 V - 50 Hz
Total weight approx.: 10,000 kg
Gijdpfx Acst Hw D Dsyjp
Accessories / Special equipment:
- Workpiece feeder by KBH, parallel to the machine, currently set up for feeding and unloading shaft-shaped workpieces approx. 16 Ø x 200 mm long with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, as well as with workpiece position control device.
- Originally, the outer gears (Zz = 25), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 x 80 mm long, were rolled on so-called planetary carriers (automotive).
- Various accessories, separate control cabinet, separate hydraulic unit 900 L, coolant system in the machine, control panel with plain-text error messages, etc.
ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more economical than gear hobbing.
The workpieces are clamped between centers and profiled by synchronised, counter-rotating rack-type tools. The material is displaced and shaped by the increasing profile height in the rack tool. In the tool’s calibration zone, profile and surface quality are optimized. No run-out of the profile is necessary, as is required with milling or shaping. The machine is characterized by an extremely robust design. The tools can achieve service lives of 25,000 to 100,000 pieces, even for helical gearing.
Condition : very good - assembled in our warehouse and ready for demonstration
Delivery : from stock - as inspected
Payment : net - upon receipt of invoice
We look forward to your order. Further cold rolling machines and other gear machining equipment always available in our range.
Palengviname jums paiešką: "prisma"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Prisma (241)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Brevetti Prisma
- Frm D Midi
- Gema Lz 170
- Kirpimo Staklės
- Lenkimo Prizmę
- Maschine Paspauskite Išspausti Guoliai
- Medienos Apdirbimo
- Metalik Pk 203
- Parat Įrankių Laikikliai

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo

























































































































































































