Pradėti Skylę Edm Mašina pirkti naudotą (13 568)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Die-sinking EDM machine HS500E, very good condition, Heidenhain Erocom II CNC controller, 60 ampere generator, EROWA clamping system, 16-position electrode changer, TFT display, Handwheel with axis selection, Fire suppression system, Contact protection, Operating manual TECHNICAL DATA MACHINE WORKING AREA Clamping surface: mm 780x500 WORKING STROKE X-axis: min. mm 490 Y-axis: min. mm 290 Z-axis: min. mm 375 C-axis: degrees 360 Table–quill distance: mm 285–660 Dielectric filling height: mm max. 345 Workpiece weight: kg max. 1500 Electrode weight on C-axis (on Z-axis): kg max. 20 (100) DIMENSIONS AND WEIGHT Width: mm 1320 Length: mm 1700 Height: mm 2200 Weight: kg 3200 GENERATOR Working current: A 60 Connected load: kVA 12 DIMENSIONS AND WEIGHT Width: mm 600 Length: mm 920 Height: mm 1970 Weight: kg 400 CONTROL UNIT 4-axis CNC controller EROCOM II ELECTRODE CHANGER 16-position for EROWA ITS40 clamping system DIELECTRIC SUPPLY Filling volume: l 450 Filter cartridges: 3 Unit: separate DIMENSIONS AND WEIGHT Width: mm 1200 Length: mm 900 Height: mm 1100 Weight: kg 800 FLOOR SPACE REQUIRED mm approx. 2200x3000 Hfodpfx Abow T Swtjmor

Sąlyga: naudotas, Table length 400 mm Table width 300 mm X-travel 300 mm Y-travel 250 mm Z-travel 250 mm Hfjdovwgq Sspfx Abmjr Machine weight approx. 1.2 t Required space approx. 2000 x 1200 x 2500 mm The machine is supplied with a comprehensive range of accessories.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatic drop-door tank Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete system: 2600 x 2600 x 2340 mm Total weight of the system: 3,300 kg The machine will be cleaned, fully overhauled, and tested on all functions after receipt of order. You will receive a 6-month warranty on the machine. We are happy to offer you machine commissioning as an additional service. Hfsdpfow D Accsx Abmjr

Gamybos metai: 2001, Sąlyga: geras (naudotas), Traverse paths X / Y / Z: 220 x 150 x 150 mm Z-axis device: Standard equipment (= 5th axis) Maximum taper angle: 15° (for workpiece 100 mm thick) Taper cutting device: Standard equipment (= 3rd and 4th axes) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Machine Tools Hfjdpeg Icdysfx Abmsr Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 24 088 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 073C1923, ruošinio svoris (maks.): 1 000 kg, X ašies eiga: 550 mm, Y ašies eiga: 370 mm, Z ašies eigos atstumas: 410 mm, bendras svoris: 3 100 kg, TECHNINĖS DETALĖS Eigos X ašies eiga: 550 mm Y ašies eiga: 370 mm Z ašies eiga: 410 mm U ašies eiga: 120 mm V ašies eiga: 120 mm Didžiausias ruošinio svoris: 1 000 kg ĮRENGINIO DETALĖS Svoris: 3 100 kg Hjdpfx Asw Nf R Eebmofr Mašinos darbo laikas: 24 088 h

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 211 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7880, X ašies eiga: 455 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 800 kg, bendras aukštis: 2 350 mm, bendras plotis: 2 700 mm, bendras ilgis: 1 800 mm, stalo plotis: 400 mm, įvesties srovės tipas: trifazis, stalo ilgis: 820 mm, garantijos trukmė: 1 mėnesiai, padavimo ilgis X ašis: 455 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 300 mm, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 5 m/min, padavimo greitis Z ašis: 15 m/min, įėjimo įtampa: 400 V, bendras svoris: 2 500 kg, įėjimo dažnis: 50 Hz, Įranga: dokumentacija / vadovas, EDM312MF30 demonstracinė mašina vos 482/211 valandų darbo laikas Techniniai duomenys: Judėjimo eiga: 450x300x300 mm Ruoqinio montavimo stalas: 820x400 mm Talpyklos dydis: 900x520 mm Užpildymo aukštis: 300 mm Atstumas stalas/-elektrodų laikiklis: 150/450 mm Didžiausias ruošinio svoris: 800 kg Didžiausias dielektriko kiekis: 600 l Matmenys (P x G x A): 2700x1800x2350 mm Svoris: 2500 kg Tinklo jungtis: 3/N/PE 400/230 50 Hz Galingumo suvartojimas: 6,7 KVA Įranga: Spalva: šviesiai pilka Valdymo sąsaja MF30 Jutiklinis ekranas Exogen+ generatorius 60A Galima padidinti generatoriaus galią iki 120A Elektrodų keitimo vietų kiekis: 201 Tiesioginės matavimo sistemos visose X, Y, Z, C ašyse 2 vnt. kasečių filtrai Integruotas aušinimo įrenginys CO² gesinimo sistema C ašis - 100 aps./min., laikanti stabdį Rankinis valdymo pultas su sutikimo mygtuku Automatinė nuleidžiama talpykla EROWA ITS prispaudimo lizdas Hsdpfexbda Ujx Abmjfr 12 mėn. garantija Transportavimas Paleidimas vietoje Mokymai

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 800 kg, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 256 mm, bendras aukštis: 2 220 mm, bendras ilgis: 2 400 mm, bendras plotis: 2 800 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 650 mm, ruošinio ilgis (maks.): 1 050 mm, bendras svoris: 4 500 kg, AGIECUT Vertex 3, Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm Submerged cutting machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D Hsdew Dn Svspfx Abmofr AGIEVISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of your order. Including user training at Techma on your overhauled machine Optional: Transport, commissioning, training, chiller

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 400 kg, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 250 mm, bendras aukštis: 2 200 mm, bendras ilgis: 2 500 mm, bendras plotis: 2 500 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 680 mm, ruošinio ilgis (maks.): 900 mm, bendras svoris: 3 000 kg, The GF AgieCharmilles CUT 20P, built in 2013, is a powerful and precise used wire EDM machine specifically designed for demanding machining tasks in the metalworking industry. Thanks to state-of-the-art technology and intelligent controls, the CUT 20P offers superior cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Benefits: ✅ Compact Machine: Workpiece size: max. 900 x 680 x 250 mm Maximum workpiece weight: 400 kg Travel axes: X/Y/Z: 350 x 250 x 250 mm U/V: ± 45 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy via glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feed and re-threading Hfedpow Dn Rlefx Abmjr 25 kg wire spool for extended operation ✅ Intelligent Control & User Friendliness: Windows-based control with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphic check for accurate simulations ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs due to robust design and long-lasting wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & Die Making ✔ High-precision Components ✔ Series Production & Prototyping Experience top productivity with the GF AgieCharmilles CUT 20P – the perfect choice for accurate and cost-effective wire EDM cutting! 📌 Our used machine from 2013 will be cleaned, refurbished, and thoroughly tested prior to sale to ensure the highest quality and reliability. 📩 Contact us for a tailored offer or to arrange a demonstration! We are also pleased to offer commissioning and training on the machine as additional services.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including KIT 50 option Hodot I Dtnepfx Abmsfr Includes automatic wire changer (AWC) Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color display, touch keyboard and mouse Includes Conic-Plus option for improved tapering Includes Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg The machine will be completely overhauled and tested by us. Customized test cuts are available upon request. We also offer on-site commissioning and training for this machine.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 500 kg,

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Hfjdpfxjwwr H Ro Abmjr Maximum taper: 30° at 100 mm Maximum workpiece dimensions (LxWxH): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting speed in cylindrical cut: 300 mm²/min Available wire diameters: 0.07 – 0.33 mm Including AGIE universal clamping frame Including AGIE JOGGER hand pendant Including control console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. Commissioning and training services are also available upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 3 000 kg, X ašies eiga: 800 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel distances: X= 800 mm, Y= 550 mm, Z= 525 mm Hfodowvqwrepfx Abmsr Travel axes: U= 800 mm, V= 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and automatic re-threading after wire breakage With automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine is cleaned and completely overhauled at our facility after order confirmation. You will receive a 6-month warranty on all machine components. Start-up and operator training can also be offered upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 450 kg, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 256 mm, bendras aukštis: 2 220 mm, bendras ilgis: 1 640 mm, bendras plotis: 2 040 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 750 mm, ruošinio ilgis (maks.): 550 mm, tuščias svoris: 2 580 kg, Įranga: dokumentacija / vadovas, AGIECUT Progress 2 Year of manufacture: 2004 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axis for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control unit Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Hsdpfx Aswvqk Ssbmsfr Our machines are thoroughly cleaned and overhauled upon receipt of the order. Afterwards, a test cut with best surface quality is performed for approval. We are pleased to offer on-site commissioning and training. Optional: - Transport - Chiller unit - Clamping devices

Gamybos metai: 2005, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Progress 3 Year of manufacture: 2005 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Maximum threadable height: 420 mm Featuring manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG high-performance generator AGIEVISION control system Hodpfsgzv Scox Abmjfr Dimensions (Length x Width x Height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be fully overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. We are also happy to offer commissioning and training services.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 700 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 400 mm, ruošinio svoris (maks.): 2 000 kg, plunksnos brūkšnys: 400 mm, atstumo iki veleno lentelė: 215 mm, ruošinio ilgis (maks.): 920 mm, ruošinio plotis (maks.): 550 mm, ruošinio aukštis (maks.): 550 mm, bendras svoris: 4 000 kg, Die-Sinking EDM Machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travels (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table to quill: 215 - 615 mm Tank fill height up to 415 mm Including pneumatic chuck 3R-Systems or Erowa ITS 50 (choice) Including 28-position electrode changer Max. electrode weight: 80 kg Including C-axis with U=0-40 rpm Hfjdpfxjq N Ap Ss Abmor Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine will be cleaned, serviced, and tested upon receipt of order. We are also pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Chiller

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhauled in 2022 C-frame design, fixed table with lowering tank Travel distances (X/Y/Z): 600 x 400 x 500 mm Distance table to quill: 200–700 mm Max. workpiece dimensions: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0–100 rpm) Pneumatic chuck of your choice (Erowa / 3R Systems) ISPG generator with 80 amperes Best achievable surface finish: Ra 0.08 µm Operator interface: AC FORM HMI 15” LCD color monitor, mouse or touchscreen, lift keyboard, and hand control Including 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm After receiving your order, the machine will be cleaned, serviced, and tested by us. Hfsdpfx Abswh Sigemer Optional: - Commissioning and operator training - Transport and installation - Cooling unit - Dielectric fluid

Gamybos metai: 2008, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge V3, Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Hfodpfx Aem Amf Debmsr Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled, and thoroughly tested by us after order receipt. Including operator training at Techma on your refurbished machine Optional: Transport, commissioning, training, chiller

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, thoroughly overhauled, and tested in our facility. We are happy to offer you a customized test cut upon request. You will receive a 6-month warranty on all machine components. We are also pleased to offer commissioning and training services. Hfsdpfx Absv Hbygjmjr

Gamybos metai: 2007, Sąlyga: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Hfedjmmfwuepfx Abmor Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Gamybos metai: 2000, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge 3 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.3 µm Average contour tolerance Tkm: +/- 5 µm Available wire diameters: 0.20 – 0.33 mm Submerged-cutting machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for easy setup Including AGIESETUP 3D AGIEVISION control AGIE HSS generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Hfjdsfdl N Ijpfx Abmjr Net weight: 4500 kg Including 6-month warranty; On request, we can commission the machine and provide on-site training.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 500 kg, bendras aukštis: 2 398 mm, bendras plotis: 1 690 mm, bendras ilgis: 1 900 mm, plunksnos brūkšnys: 300 mm, ruošinio ilgis (maks.): 790 mm, ruošinio plotis (maks.): 530 mm, ruošinio aukštis (maks.): 275 mm, bendras svoris: 2 800 kg, bakelio talpa: 410 l, GF Machining Solutions FORM 200 Year of manufacture: 2015 – Only 7,200 eroding hours! Sinker EDM machine in C-frame design Fixed table with lowering tank Travel ranges (X/Y/Z): 350 x 250 x 300 mm Max. workpiece dimensions: 790 x 530 x 275 mm Max. workpiece weight: 500 kg Programmable bath height: 100–325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of system) Max. electrode weight: 50 kg Max. inertia: 2000 kgcm² 4-position electrode changer AC FORM HMI operating interface Operation via 15" LCD color touchscreen Keyboard and handheld control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg After receipt of order, the machine will be cleaned and serviced by us. An erosion test will then be carried out. We are happy to commission the machine at your site and offer operator training. Optional: Hfedpfx Ajwi Iuujbmor - Transport - Chiller unit - Dielectric fluid - Clamping devices

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, The GF AgieCharmilles CUT 30P, year of manufacture 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining tasks in the metalworking industry. Equipped with state-of-the-art technology and intelligent control, the CUT 30P delivers top-tier cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Benefits: ✅ Large Working Area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positioning accuracy ensured by glass scales Automatic wire tensioning for consistently precise cut results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times Hodpfxov S Ua Ds Abmjfr ✅ Intelligent Control & User-Friendliness: Windows-based control system with intuitive user interface 15” LCD display for straightforward programming DXF import & 3D graphic verification for precise simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and economical wire EDM processing! 📌 Our pre-owned 2011 machine is thoroughly cleaned, refurbished, and comprehensively tested prior to sale to ensure top quality and reliability. 📩 Contact us for a personalized quote or a demonstration! We are happy to also offer you commissioning and training on the machine.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, AGIECUT Classic 2S Year of manufacture: 2001 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Hfsdpfx Ajv Dkvrjbmer Maximum workpiece weight: 200 kg (in water bath) / 450 kg (without water bath) Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand-held box for convenient setup AGIE HSS-C generator AGIEVISION control unit Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of order. Afterwards, a test cut is performed with optimal surface quality for acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Gamybos metai: 2006, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm Travel paths U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.2 µm Hfsdpfx Asgfm Rrebmor Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE generator with eCut technology for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us after receiving your order. Afterwards, we will commission the machine at your site. You will receive a 6-month warranty on the machine. We are also pleased to offer you the following additional services: - Control and maintenance training - Chiller unit - Programming system - Consumables - Clamping tools - Transportation

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 800 kg, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel ranges: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading Hedjwprq Tspfx Abmofr With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D Including automatic wire changer AWC (use of 2 wire spools) Including Conic-Plus option Including Fast-Threading option Including Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled, and thoroughly tested upon receipt of order. A laser measurement of the axes is carried out in-house. We are also pleased to perform a customer-specific test on the CUT 3000 upon request. Including operational training at Techma on your overhauled machine. Optional extras available on request: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables