Posmill C 1050 pirkti naudotą (12 528)

Sąlyga: labai geros būklės (naudotas), Vötsch Tipas: VT 3050 Surinkimo dalys / Bandymų spinta Temperatūrinė kamera Oro aušinimas Bandymų kameros tūris 500 litrų Temperatūros diapazonas -30°C /+100°C Laiko temperatūros svyravimas K ±0,5 Erdvinis temperatūros svyravimas K ±1,5 Temperatūros gradientas K 3 Keitimosi greitis Šildymas K/min 2,0 Csdsw S E N Tspfx Admjhf Vėsinimas K/min 1,4 Šilumos kompensacija maks. W 650 Kalibravimo vertės +23°C +80°C Bandyminės kameros matmenys Plotis 710 mm Gylis 590 mm Aukštis 1250 mm Išoriniai matmenys Plotis 940 mm Gylis 1030 mm Aukštis 1955 mm Garso slėgio lygis db(A)

Sąlyga: labai geros būklės (naudotas), CTS Model: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for use in environments where explosive atmospheres may occur. Such devices are specifically engineered and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate (according to IEC 60068-3-5): Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% r.h. over time The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: floor load 150 kg/m² Cedjwvr H Uepfx Admshf Insert grid: stainless steel, support surface 620 x 600 mm Max. load per grid: 35 kg Total load with maximum racks: 100 kg Control system: 32-bit controller LCD operating panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for customer-side test object control Dimensions: Test volume: 350 litres Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Sąlyga: geras (naudotas), Type: VCS 7034-5 Water-cooled Climate Test Chamber Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Specifications for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation K: ±0.1 to ±0.5 - Spatial temperature deviation K: ±0.5 to ±2.0 - Temperature gradient: 1 to 4 - Rate of change: - Cooling: 6.7 K/min Cjdpfx Adsxgd Rdsmohf - Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration values: +23°C and +80°C Specifications for Climate Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Internal Dimensions: - Width: 580 mm - Depth: 765 mm - Height: 750 mm External Dimensions: - Width: 870 mm - Depth: 1595 mm - Height: 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a BIA multifunction cabinet. BIA Multifunction Cabinet Temperature range: +15°C to +30°C and humidity Refrigerant: R-404A Chodofktnyspfx Admef 230V 50Hz 10A Type: C890TH For your security as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) Should you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a TPS Blue-M temperature convection oven. Chedodv Rabjpfx Admof TPS Blue-M Temperature Convection Oven Blue M 7780 Specifications Temperature range: 15°C above ambient temperature up to 704°C Internal dimensions (W x D x H): 25 cm x 20 cm x 20 cm External dimensions (W x D x H): 51 cm x 38 cm x 72 cm Cladding dimensions (W x D x H): 68 cm x 48 cm x 77 cm Electrical supply: 380V, 3-phase, 50 Hz CW-7780 features 8 shelf positions on 2" centers Fume extraction hood, stainless steel design, without extraction fan Model: CW-7780-JY-MP550 Condition: used Scope of supply: (See picture) (Subject to modifications and errors in technical data and information!) For any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Chjdpstz Rqmsfx Admef Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature testing: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate cooling: 0.2 K/min Temperature change rate heating: 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Cjdpetz T D Asfx Admjhf Temporal humidity deviation: ± 1 to ± 3% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Power supply: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as the buyer for your peace of mind! The following procedures are carried out on our test chambers prior to sale: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Cjdowc Nvgjpfx Admohf Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-Cooled Control Unit: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control unit. Leveling Feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Chjdpfjwgaykjx Admjf The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C time-related ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Specifications for Climatic Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temperature deviation over time in center of usable space ±0.1 to ±0.3 K Temperature deviation spatially ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity deviation over time in center of usable space ±1 to ±3 % r.h. Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be installed on site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your safety as a buyer, please note the following information! The following steps are completed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to changes and errors!) For further questions we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-2KPH Thermo TEC Espec Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +150°C Chjdpew D Dgvsfx Admjf Humidity range: 20 to 98% RH Temperature / humidity fluctuations: ±0.3°C / ±2.5% RH Temperature / humidity stability: ±0.5°C / ±3% RH Heating time: from -70°C to +150°C within 50 min Cooling time: from +20°C to -70°C within 80 min Test chamber dimensions: width 600 mm x height 850 mm x depth 600 mm External dimensions: width 1010 mm x height 1690 mm x depth 1173 mm Test chamber volume: 306 liters Refrigerants: R-404A, R-508A Stainless steel construction Connection: AC 400V 3-phase 50/60 Hz, max. 18 A Rated power: 1.5 kW Net weight: approx. 400 kg For your safety as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and error!) For further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/40 Weiss Climate Chamber, Air-Cooled -40°C to +150°C Chamber Volume: 34 litres Standard built-in feedthroughs: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature tests: Temperature range: -40 to +150 °C Temperature deviations at equilibrium, according to IEC 60068-3-5: Temporal temperature fluctuation in the usable chamber centre: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial temperature deviation (corresponds to temperature gradient): 2 to 4 Temperature change rate (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Heat compensation: max. 800 W Specifications for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (at equilibrium, according to IEC 60068-3-5): Temporal temperature fluctuation in the usable chamber centre: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (corresponds to temperature gradient): 1 to 3 Temporal humidity fluctuation in the usable chamber centre: ± 3 to ± 5 % r.h. Operating data: Test chamber lighting: halogen lamp 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Chsdexvpp Rspfx Admsf Customer-side fuse: 16A slow-blow Heat emission, air-cooled test chambers: Max. heat emission to ambient: 800 W Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not part of the sale.” For your peace of mind as a buyer, please note the following steps are carried out on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and information!) For any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Litres with Simcon 32-net Controller Cabinet is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics testing to long-term climate exposure. Technical Data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 litres Temperature range: –70 °C to +180 °C Temperature deviation at steady state: Over time: ±0.1 K to ±0.5 K Spatially: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port NW 50 mm left side 1 × port NW 125 mm left side 2× port NW 125 mm right side External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R 404A and R 23 Weight approx. 675 kg For your security as a buyer, please note the following information! The following steps are conducted in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Csdpfx Adjwybb Nsmjhf Shipping / Collection: Collection preferred Shipping via freight forwarder on pallet throughout Europe possible. (Shipping costs according to effort) Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent on the upper edge of the door (see photo). Chjdpswz Er Uefx Admsf The door closes perfectly, the seal is intact, and the climate chamber functions correctly with no technical faults. The dent is purely cosmetic and has no effect on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% RH Temperature/humidity variation: ±0.3°C / ±2.5% RH Temperature/humidity stability: ±0.5°C / ±3% RH Heating/Cooling Rates & Times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions (W x H x D): 1000 mm x 1000 mm x 800 mm External dimensions (W x H x D): 1410 mm x 1983 mm x 1593 mm Feedthrough with silicone stopper: 100 mm Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your security as the buyer, the following information: The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible errors!) For any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32-Control, Air-Cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 litres Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Codpfx Adeq U Sdnemohf Rated current: 12.5 A Rated power: 4.1 kW Required slow-blow fuse: 16 A Sound pressure level: approx. 58 dB(A), measured at 1 m distance from the front at 1 m height Data for temperature testing: Temperature range: -72 to +180 °C Temporal temperature deviation at chamber centre: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerants: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important information for your security as a buyer! The following processes are performed on our offered chambers as standard: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and errors reserved!) For further questions, we are happy to assist you by telephone.

Sąlyga: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Cjdpovba Rajfx Admjhf Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Sąlyga: labai geros būklės (naudotas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Chedpomn Rcisfx Admof Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles including ramps and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible as applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) Test volume: 990 liters Temperature range: -40 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (per IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Thermal compensation capacity (max): 4500 W Chjdpfxjwyu H Ej Admjf Calibration setpoints: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Cable Ports: - The test chamber is equipped with ports on both the right and left sides. - These allow measurement cables and test devices to be routed into the test space. - 1 × L1 DN 50 mm - 1 × R1 DN 125 mm - 3 × R1 DN 50 mm Power connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important safety information for buyers! The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, documented trial run of the chamber Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: EGNX28-6CWL Espec Climate Test Chamber Water-Cooled Climate Test Chamber N Series Temperature range: -70 to +180°C Temperature change rate: Heating: 10 K/min Cooling: 5.5 K/min Humidity range: 10 to 95% RH according to chart Internal dimensions (W x H x D in mm): 1000 x 1000 x 800 External dimensions (W x H x D in mm): 1205 x 1930 x 1960 Usable volume: 800 liters Chsdpfxjv Duuxo Admef Cooling capacity: 3.6 kW at -50°C Heating system: 10 kW Refrigerant: R-404A Refrigerant: R-508A Power supply: AC 400 V 3-phase 50/60Hz 38A Weight: approx. 695 kg For your safety as a buyer, please note the following information! The following checks are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK3-600/70 Climatic Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Max. heat compensation: 2500 W Data for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % RH Temperature deviation (over time): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity deviation (over time): ±1 to ±3 % RH Temperature uniformity (spatial): ±0.5 to ±1.0 K Max. heat compensation: 500 W Test Chamber Volume: 600 liters Test Chamber Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External Dimensions: Height 1998 mm, Width 1000 mm, Depth 1745 mm Feedthroughs: Diameter NW 125 mm and NW 50 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 452A & R23 Weight: 680 kg Chsdpfxow Nqhps Admef Important Information for Buyer Safety: The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) Please feel free to contact us by phone for further questions.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Specimen mass: 1,000 kg Cooling / Heating operation: -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Cedpevx Nfbefx Admjhf Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.

Sąlyga: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Chsdpevitmdjfx Admef Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Stäubli Robot RX 60B LCR with control unit and handheld device We offer here a Stäubli Robot RX 60B with control unit. Robot: Stäubli Robot RX 60B LCR Payload (Nominal load - kg): 2.5 kg Weight: 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V-50/60 Hz-3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Chedpfxsft Sc Io Admof Handheld device: Stäubli SP1 Condition: Used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) If you have any further questions, we would be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB(A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Newly filled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Condition: used Cjdpeir D U Dofx Admohf Scope of delivery: (see image) (Subject to changes and errors in technical details and information!) For any further questions, please feel free to contact us by phone.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range -80°C to +250°C Reproducible test results and perfect integration of the temperature chamber into the testing system. Temperature chambers: Width 600 mm x Height 1000 mm Temperature chamber for the AllroundLine Cooling via LN2 (liquid nitrogen) (-80°C connection external, not included) Voltage: 400/230 V 16A 3N~50/60Hz Power: 4500W Weight: 180 kg Condition: unused Scope of delivery: (See image) Chedpfx Aolguwwodmof (Specifications and technical data subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a climate test chamber for sale. Water-cooled Test chamber volume: 350 liters Interior dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Cjdpfxji Tw Uvs Admjhf Heating rate: 5.0 K/min Climatic operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.H. over time up to 90% r.H.; max. ±1 - 3% r.H. over time above 90% r.H. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Model: CS-70/350 Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.