Portalas Šlifavimo Staklės pirkti naudotą (48 178)

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Hodpfst Hwxhjx Ag Esfi Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Hodpfot Hw N Hjx Ag Ejfi Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Center height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal CNC External, Internal and Surface Grinding Machine with polygon, non-circular, multi-edge, and thread grinding capability BWO CNC control type 900 C, type K 51 - 1500 Year of manufacture: 2000 Serial No. 99 033 ----- Center height: 180 mm Distance between centers / grinding length: 1,700 / 1,600 mm Max. workpiece weight between centers: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/surface/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle carrier with 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / cross slide travel: 360 mm Hsdpfot Hw Rdjx Ag Eofi Grinding slide feed: 0.001 – 125 mm/min Workpiece spindle speeds, infinitely variable: 1 – 1,000 rpm C-axis spindle mount / bore: 24 mm, MK 4 Table speed (Z-axis): 0.01 – 10 m/min Total power installed: 40 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: Universal CNC cylindrical grinding machine suitable for almost all grinding tasks, in particular also for non-round grinding / eccentric/cam contour grinding and polygon grinding as well as face grinding on multi-edged workpieces and even thread grinding with appropriate grinding wheel profiles. Freely programmable BWO CNC control with a variety of subprograms and simple parameter input. Grinding of multiple diameters in a single setup possible. • B-axis with three grinding spindles, one of them with MOVOMATIC touch probe • MOVOMATIC pneumatic diameter measurement head CR 60, for mounting on the grinding table, control unit type ES 400, • MPM grinding wheel balancing device, straight dresser with diamond fleece mounted on the table, powered diamond wheel dresser, • Workpiece headstock pneumatically shiftable, hydraulic tailstock with adjustable quill, • Various other accessories, but without coolant system Condition: Good to very good – ready for demonstration under power, Ideal machine for spindle manufacturing, etc. Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 1965, Šlifavimo ilgis: 600 mm Hsdjxy S D Ejpfx Ag Eofi Šlifavimo plotis: 250 mm Aprašymas bus pateiktas vėliau!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Vidinis skersmuo: 300 mm Hfjdpfoyrtwrox Ag Esi Šlifavimo gylis: 450 mm Apsisukimo skersmuo: 660 mm Aprašymas bus pateiktas vėliau!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1981, Description to follow! Hodpfxoynmn As Ag Eofi

Būklė: labai geros būklės (naudotas), SIEMENS 840D valdymas Hfedpfjyrhl Rox Ag Eji Aprašymas netrukus!

Būklė: naudotas, Gamybos metai: 1975, Workpiece diameter: 8–125 mm Grinding depth: 130 mm Clamping length: 50–1100 mm Max. workpiece diameter: 0 mm Min. workpiece diameter: 0 mm Workpiece length: mm Total power requirement: 1 kW Machine weight: approx. 500 kg Required space: approx. m T E C H N I C A (Switzerland) Vertical Centre-Bore Grinding Machine Model: ZSM 1000 Year of manufacture: approx. 1975 Serial no.: J 1400 _____ Centre distance: 50 – 1,100 mm Workpiece diameter: 8 – 125 mm Swing diameter, tailstock centre / guideway: 290 mm Swing diameter, vice / grinding head column: 130 mm Workpiece weight: approx. 120 kg Max. centre bore taper diameter: 2–50 mm Max. centre bore taper angle: 60° Vice clamping range: approx. 4–150 mm Vertical grinding head stroke, coarse adjustment: 130 mm Fine feed of grinding pin via handwheel: 0.01–1 mm Grinding pin diameter: 27–60 mm Grinding spindle speeds (depending on pulley): 13,000–45,000 rpm Workpiece drive: 0 rpm Total drive capacity: approx. 1 kW, 380 V, 50 Hz Weight: approx. 500 kg Accessories / special features: Hodot Hwuvepfx Ag Eefi • On this machine, the grinding pin rotates around a parallel, offset axis, creating a planetary motion along the concial surface to be ground at the centre of the workpiece. • Manually height-adjustable workpiece centring stock with carbide inserts and counter-centre, with manual clamping and centring of the workpiece. • Manual dressing attachment mounted laterally to the grinding spindle, stroke approx. 40 mm, with an additional oscillating motion to produce an accurate geometric cone shape. • Fold-down pre-centring device for the workpiece. • Manually height-adjustable tailstock and bore in the machine base for longer workpieces. The machine, however, does not have a workpiece drive in the tailstock. The machine is also without a pre-centring device. Condition: Slightly in need of overhaul – ready for demonstration – Current new price is at least approx. €80,000. Delivery: ex stock – as inspected Payment: strictly net – payable upon receipt of invoice before delivery.

Būklė: naudotas, Gamybos metai: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module – max.: 5 Module – min.: 1 Control: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: approx. ___ m LIEBHERR CNC-controlled gear generating and profile grinding machine Model: LCS 282 Year of manufacture: 1999 #1099 Max. wheel diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shift/traverse path for tool: 200 mm Min. number of teeth: 7 Grinding spindle position above table min./max.: 70 - 360 mm Hfjdpfx Aget Hwu Ae Eji Workpiece clamping length: 420 to max. 620 mm Grinding worm/profile grinding wheel diameter: 145 x 210 / 175 mm Grinding worm/profile tool speed: 2,500 – 10,000 rpm Table rotation speed max.: 750 rpm Spindle drive: 28 kW Total drive approx.: 50 kW - 400 V – 50 Hz Total weight approx.: 12,000 kg Accessories / Special equipment: • LIEBHERR CNC control type LH 90 GG: easy-to-program CNC control (B+R/IPC 5000) with gear-specific user interface and diagnostic features for quick troubleshooting. (Remote diagnosis also possible) • Equipped with an automatic device for threading the grinding wheel into the tooth gap. • The machine operates with three grinding processes: a. Generating grinding using CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with profile grinding wheel in single-part processing • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device using a ring loader mounted on the counter column, which automatically moves raw and finished parts in and out. The workpieces are transported to the ring loader via a separately positioned FLEX LINK chain conveyor, picked up and removed. This enables unmanned production. • Hydraulic workpiece clamping in the table, but without clamping devices. Tailstock slide on the counter column present but without tailstock. Slide stroke up to approx. 350 mm. • Complete work area enclosure with sliding door and separate CO2 extinguishing system / IR sensor No original coolant system (as central supply), and no dressing device supplied. Condition: good to very good – powered, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We appreciate your interest – a further 200 gear machining machines available from stock at all times.

Būklė: naudotas, Gamybos metai: 1993, Wheel diameter – max. 330 mm Wheel width 180 mm Total power requirement 12 kW Machine weight approx. 7,500 kg R E I S H A U E R (Switzerland) CNC Gear Grinding Machine Model: RZ 301 AS * (* A = automatic threading)! Year of manufacture: 1993 # 71206 _____ Wheel diameter min./max.: 10 – 330 mm Module: 0.5 – 7 Helix angle: +/- 45° Slide stroke: 180 mm Max. number of teeth: 10 – 600 Workpiece clamping length: 420 up to max. 620 mm Max. workpiece weight: 60 kg Grinding worm x width: 3 of 50 x 84 – 104 mm Grinding worm speed: 1,100 – 1,900 rpm Spindle drive 4 kW – total drive approx. 12 kW – 380 V – 50 Hz Total weight approx. 7,500 kg Accessories / Special Equipment: A modern CNC control system allows entry of all relevant gear data and part setup via conversational programming. Programming language (German/English) can be switched, DNC interface for data input and output available. The machine operates in a continuous generating grinding process with fully automatic grinding cycles and automatic on-machine dressing of the grinding wheel. Equipped with an automatic device for threading the grinding wheel into the gear gap – providing significant time savings, hydraulically pivotable. Approx. 10 years ago, the profiling axis (V-axis) was electronically retrofitted by BURRI, resulting in higher accuracy, simpler profile correction, faster dressing. Currently, a REISHAUER dressing device Type SP-DR with a profile diamond disc is installed. The workpiece swivel axis (A-axis) is also operated electronically – fast and precise positioning, hydraulically clamped, enabling faster setup times and simpler workpiece loading. A shift-grinding unit guides the workpiece tangentially past the grinding wheel during machining, ensuring a consistently uniform grinding wheel profile in contact. DITTEL grinding wheel balancing device Hydraulic workpiece clamping with external collet and tailstock in the workpiece slide Hfedpfx Agst Hwyfs Eei Fully enclosed working area with sliding doors and oil mist extraction No original coolant filtration system present (central supply), however a separate grinding oil centrifuge is available Separate electrical and control cabinet, separate hydraulic unit in enclosure, grinding wheel flanges

Būklė: naudotas, Gamybos metai: 1985, Thread diameter 254 mm Grinding length 350 mm Thread pitch 51 mm Control system SIEMENS S8 Total power requirement 12 kW Machine weight approx. 5000 kg Space requirement approx. ... m Internal thread grinding machine with PLC control Hjdpfx Aet Hw U Aeg Ejfi

Būklė: naudotas, Gamybos metai: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx. 4.5 t G E I B E L & H O T Z CNC Cycle-Controlled Precision Surface Grinding Machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal movement 900 mm): 800 mm Max. grinding width (cross movement 500 mm): 500 mm Max. grinding height under wheel approx.: 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical movement: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total power approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Features: • Easy-to-program GEIBEL&HOTZ grinding cycle control Hsdpfxst Hxamj Ag Ejfi • Type SL with standard grinding programs such as flat and multi-flat grinding with roughing – finishing – sparkout – return, plunge grinding, dressing cycle with compensation, stop at loading station; all inputs/parameters via operator touchscreen and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronic components including SIEMENS OP 25 • Table movement is via rolling ring thread drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical movements by precision ball screw drive • Diamond dresser on the left side of the table beside the magnetic plate with automatic dressing cycle, compensation, pull-back and edge rounding on grinding wheels possible • MPM balancing system for the grinding wheel • Built-in permanent electromagnetic chuck approx. 800 x 500 mm, fine-pole • Wet grinding equipment with separately standing belt filter coolant filter • Full enclosure with electrically monitored sliding doors • Freestanding control cabinet, work light, various accessories, operating manuals Condition: Good to very good condition! Suitable for large-area stock removal due to wide grinding wheel! A video of the machine will be available here soon. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: Net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1979, Workpiece diameter 320 mm Thread length 300 mm Thread pitch mm Total power requirement 90 kW Machine weight approx. 12,000 kg Space requirements approx. m² Thread/worm grinding machine for steering worm Hfsdpot Hwnpjfx Ag Eoi

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Vidinis skersmuo: 300 mm Šlifavimo gylis: 450 mm Sukimosi skersmuo: 660 mm Aprašymas bus pateiktas vėliau! Hodjyrtvzjpfx Ag Eefi

Būklė: labai geros būklės (naudotas), Šlifavimo skersmuo 155 mm Šlifavimo ilgis 400 mm Atstumas nuo centro iki pagrindo 80 mm PASIŪLYMAS Siūlome Jums iš sandėlio, su išlygomis dėl netikslumų ir tarpinių pardavimų, neprivalomą pasiūlymą: STUDER (CH) Universalus precizinis išorinio ir vidinio cilindro šlifavimo staklės Tipas S 20-12 Gamybos metai Atstumas nuo centro/Šlifavimo Ø: 80 / 160 mm Hedpfjzbczxjx Ag Esfi Atstumas tarp centrų/Šlifavimo ilgis: 400 / 420 mm Vidinis šlifavimo Ø: mm Ruoinio svoris stabiliai/tarp centrų: 5 / 20 kg Stalo greitis: 0,1 – 3,5 m/min Mažiausias automatinis žingsnis: 1 mm Stalas pasukamas maks.: 30 ° Šlifavimo verpstės blokas Reguliavimo eiga, maks.: 170 mm Greitas padavimo kelias: 30 mm Įpjovos gylis, maks.: 1,9 mm/Ø Pasiūla: 0,001 – 0,04 mm/Ø Pasukamas (į dešinę): 15 / 30 ° Šlifavimo disko matmenys: angos x plotis x Ø: 127 x 30 x 300 mm Vidinio šlifavimo įrenginys, sumontuotas: mm Ruoinio verpstės blokas Lizdo kūgis: MK 2 Apsisukimai: 60 – 1 200 aps./min Verpstės pavara: 2,2 kW Bendra galia: 5 kW – 400 V – 50 Hz Svoris apie: 1 000 kg Priedai / speciali įranga: • Tradicinis elektrohidraulinis valdymas su PHILIPS skaitmeniniu indikatoriumi pastūmoms (X ašis) • Visiškai automatiniai ciklai – įpjovinis šlifavimas, išilginis šlifavimas, vidinis šlifavimas su greituoju padavimu, pirminis, baigiamasis, itin tikslus šlifavimas, iškrova • Atskirai sumontuota vidinio šlifavimo įranga su diržine vidinės verpstės pavara • Ruoinio verpstės blokas su greito tvirtinimo įvoriniu įtaisu, pasukamas 90° • Šiuo metu be atramos (naudojama atrama gali būti įsigyta atskirai, kaina apie 5 000 EUR) • Šlapiems darbams skirtas šlifavimo įrenginys su aušinimo skysčio sistema, atskira valdymo spinta, naudojimo instrukcijos Būklė: labai gera, tik 7 515 darbo valandų! Precizinė ir universali staklė! Vaizdo įrašas: Pristatymas: iš sandėlio, FCA Metzingen Apmokėjimas: tik grynasis - po sąskaitos gavimo

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Description to follow! Hfsdpfxjzd E Tzo Ag Eei

Gamybos metai: 1964, būklė: labai geros būklės (naudotas), Description to follow! Hfodpfx Aoytg U Tsg Eji

Būklė: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m Hodpfxot Hwzij Ag Eofi J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Būklė: labai geros būklės (naudotas), !!!DEMONSTRACINIS APARATAS!!! Hjdpfozl Ti Tox Ag Ejfi Parduodamas „Wesetslintner“ kraštų šlifavimo aparatas KSMO-1, kurio šlifavimo juostos ilgis – 2600 mm. Aparatas yra labai geroje būklėje ir buvo patikrintas mūsų specialistų. Techniniai duomenys: - Juostos ilgis 2600 mm - Darbinio stalo plotas 930 x 330 mm - Variklio galia 2,2 kW / 3 AG - Juostos plotis 150 mm - Su osciliacijos funkcija - Dulkių nusiurbimo jungtis 120 mm - Svoris 270 kg - Tvirtas konstrukcijos - Pagaminta Austrijoje - Nemokamas pristatymas Austrijoje Aparatas yra A-5431 Kuchl mieste ir gali būti apžiūrėtas mūsų darbo valandomis. Informacijos telefonas: 06244-20299. Susiję terminai: šlifavimo aparatas, kraštų šlifavimo aparatas, kraštai, KSM, KSM 260 Nuoroda: A0117-9998

Būklė: naudotas, Techniniai duomenys: Darbinis plotis: 1150 mm 1 kombinuotas agregatas su batuku Veleno skersmuo: 140 mm Apdirbamos medžiagos aukštis: 160 mm Padavimo juostos greitis: be pakopų reguliuojamas Hodpfezguy Njx Ag Eofi Nusiurbimo antgalio skersmuo: 160 mm Elektrinis pakėlimas Analoginis ekranas Avarinis jungiklis Pagrindinio variklio galia: 12,5 kW Įtampa: 380 V Bendri matmenys: Ilgis: 2300 mm Plotis: 2000 mm Aukštis: 2250 mm

Būklė: naudotas, Gamybos metai: 1994, maks. pravažiavimo aukštis: 160 mm, šlifavimo juostos ilgis 1 agregato: 1900 mm, maks. darbo plotis: 1350 mm, juostų skaičius: 2, 1 agregato: kalibravimo volas su grioveliais, guminis. 1 agregato tipas: grioveliuotas plienas. Šlifavimo juostos plotis 1 agregate: 1350 mm. 2 agregatas: kombinuotas šlifavimo agregatas. 2 agregato tipas: volas/bata. Valdymas: rankinis pultas. Elektros/pneumat. juostos osciliacija: pneumatinė. Įleidimo aukštis: fiksuotas (judama viršutinė dalis). Stalo pakėlimas: elektra varomas. Stalo indikatorius: mechaninis skaitmeninis rodmuo. Darbo aukštis arba padavimo stalo aukštis: 900 mm Sandėliavimo vieta: Nattheim Hedpfjy Naq Ujx Ag Eofi

Būklė: naudotas, Cup grinding machine, swing arm grinding machine, carbide chip breaker groove grinding machine, tool grinding machine, grinding machine, angle grinding machine, lathe tool grinder - Grinding head: swiveling Hfodpfx Agjfl Acij Eoi - Clamping table: 410 x 410 mm - Hitachi magnetic chuck: 470 x 160 mm - Grinding wheel diameter: 90 mm - Dimensions: 1440/760/H1745 mm - Weight: 712 kg

Būklė: naudotas, Tailstock, counter-support for dividing head, indexing fixture - Centre height: 90 mm - Mount: - Drawing: see photos - Dimensions: 140/135/H160 mm Hjdpfx Agsd Efz So Eefi - Weight: 4.7 kg

Būklė: naudotas, Grinding machine, angle grinder, tool post grinder, thread tap grinding machine, milling cutter grinder, surface grinding machine, drill grinder, bench grinder -Manufacturer: Strohm -Delivery: as is, as inspected -Safety window: damaged on one side -Bench grinder: missing -Motor: AEG 0.22/0.3 kW -Speed: 680/1400 rpm -Cooling system: switchable, adjustable Hedpofnxw Uefx Ag Ejfi -Dimensions: 590/490/H1370 mm -Weight: 222 kg

Gamybos metai: 1996, būklė: naudotas, Profile edge sanding and milling machine, edge sanding machine, edge sander, sanding machine -equipped with: copying device -Configuration: 1 sanding head -Power: 1.1 kW -Speed: 500–1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg Hfodpfed Dzliex Ag Eji Compact linear milling and sanding machine for various profiles on mouldings and panel edges. Extremely fast changeover times to stationary sanding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual adjustment of corner angles from 25 to 170 degrees. The sanding process for corner processing is completed in a single clamping operation (approx. 10 seconds).