Pamačiau Žetonų Krosnys pirkti naudotą (645)

Sąlyga: naujas, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total connected load: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°: automatic mode • Mitre left 60°: semi-automatic mode (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low vibration cutting • Removable chip tray (disinfection) • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Selectable for 2 program levels Semi-automatic mode Fully automatic mode Start after entering the required number of pieces and length: initial material cut, cutting process, and piece counting continues until the program is completed • MPS controller for entering the required number of feed cycles Kodpfsd Iip Aox Abajdw • All important machine data (power consumption, cutting time, number of pieces) is displayed on the LED display during the cutting process • Entered data is stored in the RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable via reversing automatic 1 – 29 times, remainder piece length 210 mm

Gamybos metai: 2010, Sąlyga: geras (naudotas), 928 USED Shop, Confectionery, Shelf, Electric Oven. TECHNICAL DATA - Number of baking chambers: 3 - Each chamber is equipped with a steam option - Equipped with: proofing cabinet EXTERNAL DIMENSIONS (cm): - Width: 98 - Height: 214 - Length: 98 CHAMBER DIMENSIONS (cm): - Width: 60 - Depth: 48 - Height: 18/15/15 Kedpfx Asuiw D Uebaedw The unit is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. For more information: Witold +48 508-195-853

Gamybos metai: 2006, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3206, FURNOUS DE TRATAMENTO TÉRMICO CMS ITALIA modelo DMH 7, ANO DE FABRICAÇÃO: 2006, nº de série: 3206 - potência instalada: 15 kW - tensão de alimentação: 220 V - temperatura máxima: 1000 °C - largura útil: 450 mm - altura útil: 250 mm - profundidade da câmara: 800 mm - consumo de corrente: 39,5 A - frequência: 50 Hz Kdjdeldfgpepfx Abaew Preço: 4.300 Euros + IVA, negociável, FCA: Oradea/Romênia Sujeito a erros, alterações e venda prévia. Falamos inglês. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim română.

Sąlyga: naujas, Various bimetal bandsaw blades, HSS, in the following dimensions: 1735 x 13 x 0.9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm Kjdpfsc R Tyfsx Abajdw 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), Kap Saw Reinchardt NC 700 Automatic Manufacturer: Reinchardt Model / Type: NC 700 Year of Manufacture: 1998 Category: Crosscut Saw Location: Gorzów Wlkp. Delivery Terms: Collection by Buyer Delivery Costs: Covered by the Customer Ksdpfxsd H Hmho Abaodw Commissioning: To be agreed Description: CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1 MM, NEW CONTROLLER, SAW BLADE OPERATED BY HYDRAULICS Comments:

Sąlyga: naudotas, Zu verkaufen – 3 Öfen. Technisch in einwandfreiem Zustand; optischer Zustand siehe Fotos. Die Maße und Spezifikationen jedes Ofens entnehmen Sie bitte dem beigefügten PDF-Dokument. Die Öfen wurden demontiert und lagern derzeit in unserem Lager. Wir können den Aufbau der Öfen am Standort des Käufers organisieren. Für weitere Fragen und Anfragen stehen wir Ihnen gerne zur Verfügung. Kdedpfjw Apncjx Abasw

Sąlyga: naujas, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for rapid cutting with pusher system P15. Option P30 available. Hydraulic saw frame lowering • NC controlled Ksdpfefg E Hmsx Abaodw • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially engineered for cutting profiles and beams. Maximum positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control unit ensures smooth interaction between the linear encoder and the self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The work table is mounted on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control The CNC controller enables programming of up to 90 cutting programs with varying cut lengths, quantities, and mitres. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, is equipped with "double-sided opening gripping tongs" that are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate from the ideal shape. The pusher system is constructed separately and guided by precision ball-bearing linear guides, ground rack and pinion, and a heavy-duty, frequency-driven gear motor.

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), 092 USED Thermo-oil ovens, MIWE Thermo-express + Athlet loading system. Baking surface: 66 m². Kedpowrfa Hsfx Abajdw EXTERNAL DIMENSIONS OF THE SET (in cm): - width: 820 - depth: 800 - depth to gate: 1000 - height: 350 - outfeed conveyor length after baking: approx. 1100 + bread discharge. EQUIPMENT: - MIWE deck ovens 6-1820 – 3 units, chamber dimensions 180x200 cm - MIWE Athlet loading/unloading system - manual loading devices with trolleys (approx. 10 trolleys) - heating boiler 412 kW - steam injection after baking - bread takeaway conveyor approx. 11 m - bread drop-off onto table The machine is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The given price is net per oven. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Sąlyga: naudotas, 328467, N 15/65HA, Nabertherm, muffle furnace up to 650°C Model: 328467 Ksdpfx Abjur S I Isaedw Type: N 15/65HA Condition: Used

Sąlyga: naujas, Touch - 7” colour display Cutting program input directly via touch screen Chalk line detection Operation according to stored program (100 program slots) 1x ejector unit (kicker) Hydraulic blade feed Machine compliant with CE standards Brake motor Safety cover on working area Kdodpsdify Iofx Abaew Including 1x TCT saw blade Saw motor power: 7.5 kW, 400 V, 50 Hz Saw blade diameter: 500 mm Feed system via toothed belt drive Feed speed: 120 m/min Cutting accuracy: +/- 0.8 mm Cutting capacity: up to 100 cuts/min Minimum workpiece length: 550 mm Minimum workpiece width: 40 mm Options: - Additional infeed table - Additional outfeed table - TCT saw blade, 500 mm diameter

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Sierra Ingleteadora con taladrado BALESTRIERI TECHNA PLUS 3001 Fabricante: BALESTRIERI Modelo / tipo de máquina: TECHNA PLUS 3001 Año de fabricación: 2006 Categoría de máquina: Sierra/Incaizadora Cabezal de corte móvil con accionamiento de posicionamiento a través de unidades de movimiento y visualización digital electrónica. Los deslizadores constan de guías templadas y cremalleras de bolas recirculantes. • 2 unidades con disco de Ø 400 mm – cada unidad accionada por motor de 3 kW • Capacidad (sistema radial) de la unidad deslizante de rodillos • 2 mesas de apoyo de componentes, equipadas con pinzas neumáticas verticales • 1 soporte de mesa indirecto • Lectura mediante visualizador digital electrónico • 2 unidades de taladrado desde el cabezal, cada una con 5 husillos de 32 mm – motores de 1,5 kW (5500 rpm); deslizaderas para la unidad deslizante de rodillos Ksdpfx Asd Ifgvebajdw • Lector mecánico para correcciones verticales y horizontales; cabezales de taladrado orientables horizontal o verticalmente • Inicio de ciclo mediante pulsadores a dos manos (según normativa de seguridad) y controles a pedal neumático • Evacuación automática de residuos • Altura máxima de corte: 145 mm • Ancho máximo de corte: 300 mm • Longitud mínima de corte: 170 mm (con carga/descarga automática: 355 mm) • Longitud máxima de corte: 3100 mm • Ancho de corte: 300,0 mm • Altura de corte: 145,0 mm • Potencia del motor: 1,5 kW ----- Dimensiones (Largo x Ancho x Alto): - × - × - Peso: 2.300 kg Horas de funcionamiento: - Horas conectada a la red eléctrica: - Buen estado técnico Conforme a normativas CE ----- • Peso: 2.300 kg

Sąlyga: naudotas, Used machine Ksdpfx Ajv Ntadebaedw Used scroll saw from Budget, model BDS 1101 Motor power: 70 watts Motor speed: 1,440 rpm Availability: short-term Location: Solingen

Sąlyga: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Bandsaw blade length: 5,450 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2,150 x 2,050 mm SPECIAL PRICE OFFER!!!! 2-column high-performance automatic bandsaws of the SBS series The SBS series stands out with its advanced technology, high quality, durability, and an exceptionally comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tension Ksdpfxjfg E Hvs Abaedw • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping prepared for electric and hydraulic control • Swarf conveyor The SNC 20 controller allows easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the desired dimension is entered, the control system automatically calculates both kerf loss and the required number of feed cycles. In addition, the error code display system provides rapid fault diagnosis for troubleshooting.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, 091 USED Miwe Thermostatic Ovens, Ten-level. The set includes 4 thermo-oil ovens: Year of manufacture: - 2 ovens - 2003 - 2 ovens - 2008 TECHNICAL DATA: - Shelf spacing: 17 cm EQUIPMENT: - Heating boiler - Gas burner Kdjdpewrccxofx Abaow - Racks 60x80 cm – 40 pcs - Chimneys - Steam system: each oven has its own separate steaming system The device is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The listed price is net per oven. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Sąlyga: naudotas, Pjūklas SYDERIC SR375U Kdodpfx Abexbt I Isaow

Sąlyga: beveik kaip naujas (parodų įrenginys), Are you looking for an affordable, professional solution for your bakery? Or would you like to sell your used machinery? Then you've come to the right place! ⸻ ✅ What we offer: Kdjdpfxewx H Ixe Abasw • Used & refurbished bakery machines • Deck ovens, rack ovens, proofers, dough mixers, planetary mixers, and much more • Professionally cleaned, tested & ready to use! • Brands such as W&P, Miwe, Bongard, Kemper, Diosna, Rondo, König, and many others ⸻ We also buy bakery equipment! Do you have machines you no longer need? We purchase bakery machines & ovens at fair prices – including complete business liquidations. Easy processing, quick payment, and, if required, dismantling & collection service. ⸻ Contact us! Shipping or collection possible Viewings by appointment

Sąlyga: labai geros būklės (naudotas), - Modelis: EE 5230 - Serijos numeris: 415856 - Matmenys (Ilg.xPlot.xAukšt.): 2380x3055 mm - Vidinės padėklo matmenys: 1800x2000 mm - 15 išleidimo angų, 5 lygiai - Galia: 137 kW - Įtampa: 230 / 400V, 50 Hz - Pakrovimo durys (patentuota sistema) Kdjdpfx Aowxmqyjbaew - Šilumos izoliacija tarp aukštų - 22 mm lieto ugniai atsparaus akmens padai - Pagaminimo metai: 2007

Gamybos metai: 2025, Sąlyga: naujas, FOUR ÉLECTRIQUE À BOÎTIER Le système de chauffage du four est conçu selon le principe de convection forcée. Il repose sur le principe d’injecter l’air du volume du four à l’aide d’un ventilateur de circulation et d’augmenter la température grâce au transfert de chaleur fourni par l’air traversant l’unité de chauffe. Les parois du four et de l’unité de chauffe sont réalisées en tôle modulaire et panneaux isolés haute densité. Les conduits de distribution d’air, avec registres réglables à l’intérieur du four, assurent une température homogène dans tout l’espace de cuisson. L’appareil de régulation de température est de type numérique et permet un réglage précis de la température du four. L’unité de chauffe est installée sur le côté, à l’arrière ou sur le dessus du four, et se compose d’une chambre de chauffe isolée, d’une cellule chauffante à résistance intégrée, d’un ventilateur de circulation pouvant fonctionner à 250 ºC, ainsi qu’un capot de maintenance. Fabriqué en Turquie Marquage CE Nous proposons les meilleures solutions techniques et des tarifs compétitifs. Kdodpovv Edbofx Abaow * Bureau en France et en Allemagne Contactez-nous pour plus d’informations et pour recevoir votre devis

Sąlyga: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with sophisticated technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC versions - Frequency-controlled saw drive - Operating buttons with pictograms - Work light - Driven chip brush Kedpfx Asfb Nbgjbaedw - Hydraulic band tension - Adjustable clamping pressure - Double vice (before and after the band) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf waste and the number of feed strokes required. In addition, the error code display system offers rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Aliuminio brandinimo krosnis – tai krosnis, kurioje atliekamas aliuminio profilių, ištrauktų ekstruzijos linijoje, precipitinio kietinimo, t.y. brandinimo, procesas. Aliuminio termalizavimo krosnys sustiprina porėtą aliuminio struktūrą, taikydamos profiliams, laikomiems tarp nurodytų temperatūros ir laiko intervalų, brandinimo procesą. HAS MAKİNA POWDER PAINTING SYSTEMS projektuojame ir gaminame skirtingų dydžių bei pajėgumų krosnis pagal klientų poreikius ir paskirtį, remdamiesi būtiniausiais inžineriniais skaičiavimais. Profilio termalizavimo krosnis, Aliuminio termalizavimo krosnis, Kdodpev Nkipsfx Abaow Terminė krosnis, Aliuminio brandinimo krosnis, Profilio terminio apdorojimo krosnis,

Sąlyga: labai geros būklės (naudotas), - Keturi matmenys (IxPxA): 2800x3310x2660 mm - 3 deniai Kdedpfxjwxmpij Abasw - 3 lygiai - Denio plotis: 700 mm - Denio gylis: 2220 mm - Priekinio pločio: 2120 mm - Kepimo paviršius: 13,99 m2 - Gamybinis pajėgumas: * 140 kepalų po 400 g * 196 batono po 250 g * 1343 kruasanai - Gaubto matmenys: 200 mm - Galia: 52 kW - Įtampa: 400 V - Svoris: 5600 kg - Su žirkliniu keltuvu - Atnaujinta įranga: įranga ruošiama pagal užsakymą; perdavimo ir grąžinimo datos derinamos tuo metu (kainos teiraukitės po atnaujinimo).

Sąlyga: naujas, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw band dimensions: 5980 x 41 x 1.3 mm Kdsdpfx Abofg E Hweajw Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series stands out with its advanced technology, high quality, durability, and a uniquely extensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the saw band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows simple and user-friendly input of up to 20 different sawing operations (length and quantity). When entering the target dimension, the control system automatically calculates the trim cut and number of feed strokes. Additionally, the error code display system enables quick diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Kdodpfx Ajfm T Hbjbaow Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard equipment includes: - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input Kodpofu Nbbofx Abajdw

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirements: approx. 5.85 x 3.6 x 2.7 m 2-column band saw for high-speed cutting, K-tech 800H with pusher system P 15. P 30 (option). Fast, smooth and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is done vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal clamping vice. The combined action of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. Kodpfxofgyife Abasdw The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning requirements and conserves resources. CNC Control A CNC control unit allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. The B&S pusher system (feed and positioning system) is equipped with "double-opening hydraulic grippers," which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and guided by ball-bearing linear rails, precision-ground rack, and a frequency-driven, robust gear motor.