Ott Euromatic pirkti naudotą (71)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Ott Atlantic V6 edge banding machine Features: end trimming, double milling, radius scraper, buffing discs Edge thickness: 0.2 - 6 mm Minimum workpiece width: 70 mm Todpsr Elhvsfx Ablod Workpiece height: 8-42 mm Feed speed: 12 m/min Condition: very lightly used Year of manufacture: 1999 Price: 5,500.-

Sąlyga: naudotas, Gamybos metai: 1995, Used machine Year of manufacture: 1995 Features and technical data: - Glue pot with glue roller - Pre-cutting knife - 4 pressure rollers - 2-motor end trimming unit - Radius milling unit - Flush milling unit - Radius scraper Edge thickness: 0.2 - 6 mm Minimum workpiece width: 70 mm Tedpjwpm Igjfx Ablod Workpiece height: 8-42 mm Feed speed: 12 m/min Shipping dimensions: 370 x 100 x 125 cm Weight: 1,330 kg Location: Röllbach Availability: short notice

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 9 kW (12,24 AG), Ott veneer press Tjdpfx Astwp Iwjblod Connected load: 380V 9kW Plate dimensions: 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in good working condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, max. Edge thickness: 0.2 – 15 mm Feed speed: 12 / 18 m/min Heating-up time: approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Granulate quick-heating tank Guillotine: 0.2 – 3.0 mm Flush trimming unit Radius trimming unit Operation via selector switch / push buttons Extendable roller support Soundproof enclosure Machine length: 3,800 mm Todpfx Abjfbr S Rsled Note on used machines: - Errors in technical specifications and prior sale excepted. - Listed prices are ex location – loaded free of charge! - The machines have been cleaned and function-tested. - All machines are sold as inspected, without any claim to warranty. Buyers are free to inspect the machines at the site. - Special agreements are only valid in written form. (We only respond to inquiries specifying your address and phone number!)

Sąlyga: naudotas, Gamybos metai: 1994, veikimo valandos: 5 373 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M/6176, bendras ilgis: 9 000 mm, bendras plotis: 1 400 mm, bendras aukštis: 2 000 mm, bendras svoris: 4 000 kg, Edge banding machine Operating hours: 05373.33 h (read from display) Processing units: - Upper pressure section KAM 4-2 01 - Quick-heating pot KAM 4-61-02.01 - Lower pressure section KAM 4-1-01 - Table for edge feeding KAM 4-4-01 - Automatic magazine for solid wood edges and foils - Feed roller KAM K4-51-01 - KAM trailing foil cutter - End trimming unit model type K 17 - Fixed milling unit KAM 4-50-00 model type NF 30.1 - Fine trimming unit KAM 4-26-80 - Groove milling unit KAM 4-32-01 - Corner rounding - Sanding unit - Scraper unit - Oscillating edge cleaning unit KE-0 Tjdjwf U E Sopfx Abljd Dimensions: approx. 9,000 x 1,400 x 2,000 mm Weight: approx. 4,000 kg

Sąlyga: naudotas, Gamybos metai: 1984, Special press dimension, large pressing depth: 1,600 mm Pressing length: 2,750 mm Platen size: 2,750 mm x 1,600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels/decks including control system – newly retrofitted retrofitted used, in good condition Manufacturer: Ott Model: 300 K 135 Year of manufacture: 1984 Machine no.: 13741 Number of decks: 2 Cover sheets hard-anodized Platen size approx. 2,750 mm x 1,600 mm Opening width approx. 185 mm Tjdpsv Hhudofx Abled Push-button control Safety cord at bottom Lateral guidance Electric heating Specific pressing pressure max. 5.5 bar Piston diameter: 90 mm Bottom pistons: 6 pcs Original price approx. €40,000.00 Required floor space approx. 3,600 mm x 1,600 mm x 2,000 mm Total connected load: 49 kW Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as is, as inspected, without warranty or guarantee

Sąlyga: paruoštas naudoti (naudotas), Manufacturer: OTT Model: TKS Working height: 800 mm Dimensions: W 1,060 x L 720 x H 930 mm Tsdpfxohir A Ho Abljd Weight approx.: 120 kg Condition: used

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Suitable for sanding – calibrating solid wood and for fine sanding of veneer as well as stained or lacquered parts. Maximum working width: 1100 mm Maximum workpiece thickness: 150 mm 1 sanding belt combination unit Calibrating roller diameter: 120 mm, with helical rubber coating (90 Shore) and sanding pad unit Brush roller at the outfeed Minimum workpiece thickness: 2 mm Sanding belt dimensions: 1120 mm x 1900 mm Sanding belt speed: 25 m/sec. Infinitely variable feed speed: 3 – 18 m/min. Sanding unit motor power: 15 kW Feed motor power: 1.5 kW Table height adjustment motor power: 0.8 kW Rated connection value: 17.5 kW Todpfx Abjwu H Udjlod Operating pressure: 6 bar Extraction port diameter: 1 x 250 mm + 1 x 160 mm With extraction ducting included

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1975, Power connection 400V 13kW 2 heating plates, each 1200 x 2250 mm Heating plates controlled via 2 thermostats Pressing pressure at 250 bar Dimensions (LxWxH): 2590 x 1330 x 1950 mm Todpfx Abjkkflboled Weight approx. 2800 kg Max. pressing thickness 380 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge band magazine Jointing milling unit: 2 x 1.5 kW, servo-controlled End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, radius R=2, double-sided tracing Corner rounding unit: 2 x 0.3 kW Scraper unit, automatic feed Surface scraper unit, with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating Tjdpjlc Ewisfx Ablsd 5-way spraying system (2x separator, 1x release agent, 2x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Continuously adjustable feed COMBI MELT gluing unit for EVA/PUR, hopper capacity 1.5 l CE mark Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Gamybos metai: 1981, Sąlyga: paruoštas naudoti (naudotas), Hydraulic press with conveyor belt feed and block tipper Tsdpfx Abohyc N Toljd Pressing area: 122 cm x 420 cm

Sąlyga: naudotas, Gamybos metai: 1993, with pre-milling used, good condition Manufacturer: Ott Model: Kantomat 156-FÜ Year of manufacture: 1993 Edging thickness: 15 mm Workpiece height: min. 10 mm, max. 60 mm Workpiece width: min. 60 mm Workpiece length: min. 60/160 mm Thick edges up to 3 mm Trimming from the coil up to 3 mm Pre-milling Trimming unit K 14 / 2 x 1.1 HP Tsdpfx Ajvwfyfsbled Flush milling HF15.1 2 x 1.5 HP Chamfer 082 2 x 0.8 HP, swivels 0-45° Radius milling: 2 x 0.8 HP Radius scraper blade, pneumatically controlled Buffing, oscillating, pneumatically with pneumatic infeed, 2 x 0.3 HP automatic edge magazine feed speed infinitely variable granulate quick heating tank soundproof enclosure large roller support dust extraction port D 160 mm Space requirement approx. 7400 mm x 1000 mm x 1600 mm Total connected load 22 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, as viewed, without guarantee or warranty

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, veikimo valandos: 601 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C/70001, ruošinio aukštis (maks.): 42 mm, briaunos storis (maks.): 3 mm, gaminio ilgis (min.): 160 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece height: 8 – 42 mm Workpiece width: min. 70 mm Workpiece length (strip edging): min. 160 mm Workpiece length (coil): min. 60 mm Workpiece length (with twin end trimming unit): min. 150 mm Edge Parameters Edge thickness: max. 3 mm Edgebanding material thickness: 0.2 – 12 mm Working Height and Feed Speed Working height: 800 mm Feed speed: 12 m/min Adhesive Application Adhesive application: via application roller Method: hot-melt adhesive, hot-cold process, single-sided (right-hand configuration) Glue pot heat-up time: 8 min MACHINE DETAILS Total connected load: 12.5 kW Total weight: 2,100 kg Overall length: 5,300 mm Overall width: 900 mm Overall height: 1,300 mm Operating voltage: 400 V, 50 Hz Input current: 400 A Compressed air connection: 6 bar Air connection: 6 bar, 1/4" Extraction connection: 1 x central extraction port, diameter: 160 mm UNITS - Jointing unit with 2 HF motors, 1.5 kW each, 12,000 rpm, automatic control, including DIA MAX DIA jointing cutter set Ø 85 x 30 x 42 mm, Z 3 (LEUCO system), for panel thickness up to 42 mm - Twin end trimming unit with 2 HF motors, 0.3 kW each, 12,000 rpm, 2 automatic positions (0° / 3°), 2 carbide saw blades Ø 140 x 3.2 x 16 mm, Z 36 - Flush trimming unit with 2 HF motors, 0.43 kW each, 12,000 rpm, for solid and plastic edging, single-sided sensing, 2 carbide reversible knife heads Ø 70 x 20 x 16 mm, Z 4 - Fine trimming unit with 2 HF motors, 0.3 kW each, 12,000 rpm, double-sided sensing, quick-change system, 2 AT 73 – carbide radius cutters Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 - Scraper unit, double-sided sensing, automatic feed, for PVC and plastic edging - Corner rounding unit with 2 motors, 0.35 kW each, 12,000 rpm, 200 Hz, double-sided sensing, 1 working spindle top/bottom, 2 radius cutter heads AR 73 Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 EQUIPMENT - Dual roller top pressure with electronic positioning - Single feed for strip and solid edging - Automatic coil magazine for rolls up to 800 mm diameter, with pneumatic guillotine for thickness up to 3 mm - Quick-heat glue pot for hot-melt granulate, with electronic temperature control - Automatic glue dosage adjustment via PLC (synchronous and counter-rotation) - Automatic infeed fence, no manual adjustment for edge thickness required - Central control via PLC-operated control panel, including plain text error display Tedpfx Abjwlquvsljd - Program memory with name and number-based programs

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Tsdpsgmn H Aofx Ablsd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Nominal air flow rate Vnenn 750 m³/h, extraction nozzle D=100 mm, minimum air flow rate Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz. Tedpfev Azfzsx Abljd

Sąlyga: labai geros būklės (naudotas), Pressing surface: 2500 x 1250 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3,600 kg Hydraulic Heated Platen Press Down-stroke design Electrically heated platens, gold anodized version Pressing pressure steplessly adjustable via pressure control device Two-stage hydraulic pump with automatic switchover valve from low to high pressure Tjdpjrivrwefx Ablod Central control panel with all operating elements Analog temperature display for both heated platens Safety pull cord Rack and pinion equalization Main switch CE conformity LOWER ELECTRICALLY HEATED PLATEN NEW UPPER ELECTRICALLY HEATED PLATEN REPLACED approx. 4 years ago

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, Sander with a working width of 1300 mm. In good condition. Tedpfx Abowptrrsljd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 100 mm, Item no. 2679, year of manufacture 1991. Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, belt speed: 18 m/sec., feed speeds: 4 + 8 m/min., main sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed conveyor: 1.3/1.8 kW, operating pressure: 6 bar, air consumption: 10 l/min., extraction outlets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg. Tjdpfjtppz Iex Abljd Standard equipment: - Contact roller, D=150 mm, hardness 90° Shore - Air sanding shoe with automatic infeed/outfeed - Fixed sanding shoe for solid wood frame sanding - Brush roller driven by the sanding aggregate - Automatic centering of feed conveyor - Feed conveyor with high-quality rubber perforated belt and automatic belt centering - Pneumatic belt tensioning with automatic length compensation - Non-contact electronic belt oscillation - Low-wear disk brake system for instant sanding belt stop with pressure monitor - Motor-driven thickness adjustment with digital display - Infeed workpiece thickness limiter - Semi-automatic workpiece thickness adjustment - Fourfold grit/thickness compensation for contact roller. Special accessories: workpiece thickness gauge.

Sąlyga: labai geros būklės (naudotas), Edge cutting device Todpfxewiwnqj Abled Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Including milling cutter

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, 0.75 kW Spray device Laminated star 150/70/25 mm sisal/leather/plastic fabric Laminated star 150/70/25 mm sisal/plastic Flanges 70 mm reduced to 11 mm (2 pcs.) metal Todpoigaf Rsfx Ablod Control panel on top 4 motors of 0.18 kW each for brushes

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Tsdpfx Aohy Tlrobled Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (strip edgebanding) Minimum length: 60 mm (from roll) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction connection: Ø160 mm Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2,200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double upper pressure with electric height adjustment - Automatic magazine for edgebanding rolls up to 800 mm Ø - Pneumatic guillotine shears for strip edgebanding up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end cutting saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush milling unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Scraper unit Note for used machines: - Errors in technical specifications and prior sale reserved. - Prices quoted are ex-site, loaded free of charge! - The machines have been cleaned and function tested. - All machines are sold as seen without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. - Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)