Oro Ortakis pirkti naudotą (14 897)

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). Ljdpfxjvz Hq Ho Af Ijhb - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation Ledpsvz Hqysfx Af Ishb - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Lhsdevz Hqtopfx Af Ieb Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² Lodpfxovz Hqmj Af Ishb - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar Ljdpfxevz Hqgs Af Ishb - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Lhedpfx Afsvz Hhxs Isb Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Sąlyga: geras (naudotas), Compressed air filter, fine filter Ljdsb A Ni Eepfx Af Iohb - Connection: 2" inch - Quantity: 3 filters available - Price: per unit

Sąlyga: naudotas, Air cooler, evaporator, cold storage room, refrigerated container, cold room Lhsdpfjb A Iv Dox Af Ijb - Quantity: 2x fans, 0.58 kW, 1200 watts - Weight: 16 kg

Gamybos metai: 1975, Sąlyga: geras (naudotas), Compressed air breathing apparatus - Electric pump with emergency crank Lhedpob A H Ntsfx Af Ijb - Distributor with pressure gauge - Hose - Box - Handover: in as-is condition as inspected - Weight: 100 kg

Gamybos metai: 1975, Sąlyga: naudotas, Compressed Air Breathing Apparatus - Delivery: in as-is condition as inspected - Electric pump with emergency hand crank - Distributor: with pressure gauge - Hose - Box - Weight: 100 kg Lhsdpfx Aob A Hi Dof Iob

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Amano PiA-30U Entstauber Guter Betriebszustand. Bitte sehen Sie sich auch unsere weiteren Angebote an. Lsdpfxsryxmxo Af Iehb

Sąlyga: beveik kaip naujas (parodų įrenginys), Visiškai naujas, nenaudotas. Prašome peržiūrėti ir kitus mūsų skelbimus. Lodpsu Uth Hefx Af Ijhb

Sąlyga: geras (naudotas), Filter (Luftfilter) Ledeb S Htaopfx Af Ijhb -Typ: MS 246 ALR -Abmessungen: 305 x 305 x H246 mm -Gewicht: 40 kg

Sąlyga: labai geros būklės (naudotas), Oro filtras Lodpfob A Iwlex Af Ijhb -Tipas: 6.0690.16.7.0110 -Kiekis: yra 8 vnt. -Kaina: už vienetą

Sąlyga: naudotas, Oro vamzdžių paketo ekstraktorius, oro vamzdžių paketo montavimo stotis šilumokaičiams, aušinimo spiralėms, aušinimo vamzdžiams, aušinimo spiralei, vamzdžių paketiniams šilumokaičiams Lhodow Ty Dnjpfx Af Ieb - Perdavimo sąlygos: esama būsena, kaip apžiūrėta (be dokumentacijos) - Būklė: dyzelinis variklis šiuo metu neveikia - Oro vamzdžių paketo ekstraktorius: Hydro-Extractors INC - Tipas: 504- Diesel - Matmenys: 8400/1900/H2850 mm - Transportavimo matmenys: 8400/1900/H1700 mm - Svoris: 6860 kg

Gamybos metai: 2024, Sąlyga: naujas, For sale: WLO 20 kW warm air furnace / workshop stove / wood-burning stove / hall stove Lhodpfjixun Tex Af Iob Technical specifications: - Nominal heat output: 20.00 kW - Maximum heat output: 23.00 kW / approx. 230 m² - Included: axial fan, speed: 1380 rpm, capacity: 2910 m³/h - Included: driver - Innovative air jacket design fully surrounds the stove for maximum efficiency - Indestructible firebox made from 5 mm thick boiler plate steel - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 160 kg - Gross weight: 180 kg - Stove lining: 12 fireclay bricks - Large, replaceable cast iron grate - Coated with certified heat-resistant paint for corrosion protection and an attractive appearance - Robust construction - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ - Recommended fuel: seasoned hardwood with moisture content ≤20%, briquettes, coal as an additive only up to 10% Safety and certifications: - CE mark: YES / located on the nameplate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External dimensions: total width 485 mm x total depth 790 mm x total height 1030 mm - Stove dimensions: width 380 mm x depth 450 mm x height 500 mm - Upper door dimensions (sheet 3 and 4 mm): width 365 mm x height 215 mm - Lower door dimensions (3 and 4 mm sheet): width 365 mm x height 295 mm - Upper loading opening: width 285 mm x height 195 mm - Lower loading opening: width 285 mm x height 265 mm - Cast iron grate dimensions: width 210 mm x depth 300 mm - Hot air outlet diameter: Ø 120 mm - Exhaust outlet diameter: Ø 130 mm - Leg height: 140 mm Fan technical specifications: - Fan type: axial blower - Material: steel (propeller + housing) - Diameter: Ø 300 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.30A - Speed: 1380 rpm - Airflow: 2910 m³/h - Safety: CE marking + protective grid

Gamybos metai: 2024, Sąlyga: naujas, For sale: New WLO 50 kW Warm Air Heater, Workshop Stove, Wood Burner Technical Specifications of the Heater: - Rated heating output: 44.50 kW - Maximum heating output: 50.00 kW / suitable for approx. 300 m² - Included: Axial fan, speed: 1350 rpm, capacity: 5060 m³/h - Supplied with: Operator’s manual - Innovative air jacket design completely encloses the stove for maximum efficiency - Robust construction: made entirely from P265GH and 16Mo3 certified boiler plates, thicknesses #6 mm and #10 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 330 kg - Gross weight: 340 kg - Fire chamber lining: 40 fireclay bricks - Two removable large cast iron grates: 300 x 200 mm Lsdpfeixup Asx Af Iehb - Coated with certified heat-resistant paint for corrosion protection and enhanced appearance - Solid structure - Large combustion chamber - Wide loading door - User manual included - Efficiency: 75.00% - CO emissions at 13% O₂: 1.20 m - Recommended fuel: Seasoned hardwood with moisture content ≤20% * mg/Nm³, briquettes; coal only as an additive up to 10% Safety and Certification: - CE marking: YES / indicated on the nameplate - Standard compliance: EN13240:2006 - Meets BImSchV Stage 2: Yes Dimensions: - External dimensions: Total width: 580 mm x total depth: 1290 mm x total height: 1310 mm - Firebox dimensions: Width: 480 mm x depth: 930 mm x height: 680 mm - Upper door (3 and 4 mm plate): Width: 390 mm x height: 330 mm - Middle door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Lower door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Top loading opening: Width: 315 mm x height: 310 mm - Middle/lower loading opening: Width: 315 mm x height: 130 mm - Cast iron grate: Width: 210 mm x depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Data: - Type: Axial fan - Material: Steel (impeller + housing) - Diameter: Ø 450 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82 A - Speed: 1350 rpm - Airflow: 5060 m³/h - Safety: CE marking + protective mesh

Gamybos metai: 2024, Sąlyga: naujas, For sale: New WLO - 15 kW warm air furnace, workshop stove, wood stove Ljdpfxjixul He Af Iehb Technical Specifications of the Furnace Rated heating output: 12.00 kW Maximum heating output: 15.00 kW / approx. 150 m² Supplied with: Forced axial fan, speed: 1400 rpm, capacity: 1460 m³/h Innovative air jacket design, fully enclosing the furnace for maximum efficiency Extremely robust furnace made entirely from certified P265GH and 16Mo6 boiler plates, thicknesses #6mm and #10mm Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg Replaceable large cast iron grate Coated with certified heat-resistant paint for corrosion protection and an attractive appearance Solid structure Large combustion chamber Large loading door User manual included Efficiency: 75.00% CO emissions at 13% O₂: 1.20 mg/Nm³ Fuel type: recommended seasoned hardwood with a moisture content of ≤20%, briquettes, coal permitted as additive up to 10% Safety and Certifications CE marking: YES / present on the nameplate Conforms to standard: EN13240:2006 BimSchV Stage 2: Yes Technical Specifications of the Fan Type of fan: Axial blower Material: Steel (propeller + housing) Diameter: Ø 250 mm Power supply: 230 V / 50 Hz Motor: 4 poles Current consumption: 0.30 A Speed: 1400 rpm Air flow: 1460 m³/h Safety: CE mark + protective grille

Gamybos metai: 2023, Sąlyga: naujas, For sale: New WLO Octagon 49.5 kW Warm Air Heater, Workshop Stove, Wood Burner, Industrial Hall Heater Thanks to its high-performance combustion chamber, the stove can accommodate logs up to 120 cm in length! Technical Specifications: - Rated heating output: 49.5 kW – approx. 450 m² - Included: Axial fan, speed: 1380 rpm, output: 5,500 m³/h - Included in delivery: Controller for SCL-1515 fan operation - Innovative air jacket design completely encases the unit for maximum efficiency - Indestructible construction made entirely of certified boiler steel p265gh & 16M06, 6mm wall thickness - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 320 kg - Gross weight: 340 kg - Grate size: 1000 x 250 mm - Coated with certified heat-resistant paint for corrosion protection and an aesthetic finish - Robust build quality - Huge combustion chamber 120 x 80 cm! - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O₂: 1.20 mg/Nm³ - Fuel type: Recommended – seasoned hardwood with ≤20% moisture*, briquettes, coal only as an additive (up to 10%) Safety and Certifications: - CE marking: YES / on the nameplate - Compliance: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: Lodpoixuq Dofx Af Iehb - External dimensions: Width: 800 mm x Depth: 1600 mm x Height: 1200 mm - Stove dimensions: Width: 800 mm x Length: 1200 mm x Height: 800 mm - Upper door (3 and 4 mm steel): Width: 520 mm x Height: 470 mm - Lower door (3 and 4 mm steel): Width: 360 mm x Height: 150 mm - Upper loading opening: Width: 460 mm x Height: 460 mm - Lower opening: Width: 360 mm x Height: 130 mm - Grate dimensions: Width: 250 mm x Depth: 1000 mm - Hot air outlet diameter: Ø 150 mm - Flue gas outlet diameter: Ø 200 mm - Leg height: 140 mm

Gamybos metai: 2023, Sąlyga: naujas, For sale: WLO 25 kW warm air heater – ideal for workshops, wood-burning stove applications, and industrial spaces. Technical Specifications of the Heater: - Nominal heating output: 25.00 kW - Maximum heating output: 30.00 kW / approx. 300 m² - Set includes: Forced axial fan (speed: 1400 rpm, capacity: 3110 m³/h) - Gear drive included - Innovative air jacket design fully encloses the unit for maximum efficiency - Extremely robust construction made entirely from certified P265GH and 16Mo6 boiler steel (6 mm and 10 mm thick) - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A, energy efficiency index: 110 - Net weight: 230 kg; gross weight: 240 kg - Firebox lined with 15 fireclay bricks - Two large removable cast iron grates (300 x 200 mm) - Coated with certified heat-resistant paint for corrosion protection and aesthetic appearance - Solid, heavy-duty build - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00 % - CO emissions at 13% O2: 1.20 mg/Nm³ - Recommended fuel: seasoned hardwood (≤20% moisture), briquettes, coal (as an additive up to 10%) Safety and Certifications: - CE mark: YES / present on type plate - Standard compliance: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - Overall dimensions: 485 mm (W) x 900 mm (D) x 1310 mm (H) - Firebox dimensions: 390 mm (W) x 460 mm (D) x 540 mm (H) - Upper door (3/4 mm steel): 390 mm (W) x 230 mm (H) - Middle door (3/4 mm steel): 390 mm (W) x 155 mm (H) - Lower door (3/4 mm steel): 390 mm (W) x 150 mm (H) - Upper loading opening: 310 mm (W) x 210 mm (H) - Middle/lower loading openings: 310 mm (W) x 130 mm (H) - Cast iron grate: 210 mm (W) x 300 mm (D) - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 130 mm - Leg height: 140 mm Fan Technical Parameters: Lodpfxeixupmj Af Ijhb - Fan type: Axial blower - Material: Steel (fan and housing) - Diameter: Ø 350 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Rated current: 0.58A - Speed: 1400 rpm - Airflow: 3110 m³/h - Safety: CE marking + safety mesh

Gamybos metai: 2023, Sąlyga: naujas, For sale: New WLO 4 35 kW Warm Air Heater, Workshop Stove, Wood Stove, Industrial Hall Heater Technical Specifications of the Furnace - Rated heating output: 30.00 kW - Maximum heating output: 35.00 kW / approx. 300 m² - Included: forced axial fan, speed: 1350 rpm and capacity: 3,500 m³/h - Set includes: drive unit - Innovative air jacket design surrounds the heater fully for maximum efficiency - Indestructible furnace body made entirely from P265GH and 16Mo6 certified boiler sheets, thicknesses # 6mm and # 10mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 290 kg - Gross weight: 310 kg - Furnace lining: 28 refractory bricks - Removable two large cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and an attractive look - Massive structure - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ - Fuel type: recommended seasoned hardwood with moisture content ≤20%*, briquettes, coal only as an admixture up to 10% Safety and Certifications - CE marking: YES / on the type plate - Compliance standard: EN13240: 2006 - BimSchV Level 2: Yes Dimensions - External dimensions: Overall width: 580 mm x Overall depth: 950 mm x Overall height: 1,310 mm - Hearth dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm - Upper door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 230 mm - Middle door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 155 mm - Bottom door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 150 mm - Upper loading opening dimensions: Width: 310 mm x Height: 210 mm - Loading opening dimensions middle and bottom: Width: 310 mm x Height: 130 mm - Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Technical Specifications of the Fan - Fan type: Axial blower - Material: Steel (impeller + housing) - Diameter: Ø 400 mm Lodpfxsixupus Af Ishb - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82A - Speed: 1,350 rpm - Air flow: 3,500 m³/h - Safety: CE marking + protective grille

Sąlyga: geras (naudotas), Gamybos metai: 1998, air receiver, pressure vessel, pressure tank, compressed air tank, compressed air vessel, compressor tank - Manufacturer: Maschinen- und Behälterbau, vertical air receiver - Capacity: 3,000 l - Working pressure: 11 bar - Accessories: incl. mounted components, see photos - Dimensions: Ø 1,475 x 2,760 mm - Weight: 700 kg Lsdpfephun Esx Af Ijhb

Sąlyga: geras (naudotas), Oil filling station, compressed air pump for fresh oil, remote oil apparatus, oil dispensing device, oil filling device, oil transfer pump, gearbox oil pump, hydraulic oil pump, oil-slinger gearbox oil pump - Operation: pneumatic - Hose reel - Hose: 6 m - Hand valve with quantity indicator - Quantity: 3 pumps with hose reel available Lhodpsb A Hzxjfx Af Iob - Price: per unit - Weight: 60 kg/unit

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 76 430 km, pirmoji registracija: 04/2018, pavaros tipas: automatinis, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 050 mm, krovos erdvės aukštis: 1 830 mm, Įranga: AdBlue, Bluetooth, navigacijos sistema, oro kondicionavimas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, transporto ilgis: 7 500 mm, tūrio srautas: 40 000 m³/val, bendras ilgis: 7 500 mm, consisting of: 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium - electric Installed electrical power for both dryers: approx. 210 kW 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h (heating coil 90 kW) 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Installed electric power: 115 kW Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Output: 1.5 kW; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h PR frost protection for N.1 heating battery, with probe and automatic control of shut-off damper 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives, highly efficient for increased heat exchange thanks to high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed transversely across the entire tunnel area. Lodpfx Afow H Aw Sj Iohb Air knife outlet speed max. 32.5 m/sec Overall length: 3,000 mm Usable width: 1,300 mm Total width: 1,783 mm Usable pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Installed electric power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 rod conveyor with double chain, steel guides, and chrome-plated rods. 4. CEFLA TR 3000 Roller Conveyor Motorized rollers coated with PVC Length: 3,000 mm Photoelectric barrier for thin panels, thickness 4 mm (Technical specifications subject to change and errors, prior sale reserved)