Oro Ištraukimo 4 Krepšys pirkti naudotą (69 754)

Būklė: naudotas, rida: 1 001 km, pirmoji registracija: 01/2003, spalva: geltonas, vairuotojo kabina: kitas, pavaros tipas: kitas, krovinio erdvės tūris: 14 m³, Gamybos metai: 2003,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Hjdpfjd Tbbdex Ab Sjni Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level. Hnodjfdkb Tjpfx Ab Sei

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Hodpfjd Tqalox Ab Soni - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Hnjdpfx Abjfdkb Us Ssi - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: Hodeguk Dkspfx Ab Seni - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Hsdpfx Abofdkbho Sjni Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg Hjdpfx Aboguk Dvo Soni - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, WEISHAUPT WM-G10/A-4; Su dujų trasa - Galia: 110-1250 kW Hnodpfxswgym Do Ab Sei - Pagaminimo metai: 2011 - Vykdymas: ZM

Būklė: labai geros būklės (naudotas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Previously mounted on a VTC 300, now for sale due to replacement with a new 5-axis machine. Hnedpfxjp U Umks Ab Ssi

Būklė: beveik kaip naujas (naudotas), Treif Brotschneidemaschine 4-24MM, in gutem Arbeitszustand. Für weitere Informationen senden Sie bitte eine Anfrage. Hnodpeumpg Rsfx Ab Soi

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, lentynos aukštis: 3 500 mm, atrama ilgis: 2 700 mm, lentyna ilgis: 8 500 mm, rėmo aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, rėmo plotis: 1 100 mm, lentynų eilučių skaičius: 4, padėklų vietos: 108 euro padėklai, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Hsdpfx Absv Ukz As Seni Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Būklė: naudotas, Questa inserzione riguarda il frigorifero LABCOLD RLDF1520 Classe Climatica 4. L’unità è perfettamente funzionante ed è pronta per l’uso immediato. Il modello LABCOLD RLDF1510 è un frigorifero da farmacia e vaccini, progettato per la conservazione di medicinali, vaccini o materiali biologici sensibili alle variazioni di temperatura. Alcune delle principali specifiche tecniche e caratteristiche: Caratteristica | Specifica / Dettaglio --- | --- Capacità | ~430 litri Dimensioni esterne (A × L × P) | 1860 mm × 600 mm × 700 mm Intervallo di temperatura | +2 °C a +8 °C (temperatura operativa nominale ~5 °C) Controllo / Monitoraggio | Controller “IntelliCold™”, registrazione temperatura 24/7, allarmi (alta/bassa temperatura, porta aperta, mancanza elettrica) Hnjdpfsxhdthox Ab Sji Isolamento / Costruzione | Esterno in acciaio smaltato, interno in alluminio verniciato anticorrosione; raffreddamento ventilato; sbrinamento automatico fuori ciclo Tipologia porta | Porta cieca (non in vetro) Altre caratteristiche | Serratura con chiavi, porta di accesso per sonda, contatto remoto per allarme, memoria dati (13 mesi) Consumo energetico | Circa 5,52 kWh/24h (dato riferito anche al modello correlato da 440 L) In sintesi: si tratta di un frigorifero robusto, conforme alle normative, specificamente pensato per la catena del freddo (conservazione di farmaci, vaccini, prodotti biologici) e non per l’uso domestico o alimentare generico.

Būklė: naujas, Gamybos metai: 2020, Model: KPZ-2 Type: Enclosed Working Dimensions: 900 mm W x 1300 mm H x 900 mm D External Dimensions: 980 mm W x 2100 mm H x 1600 mm D Operation: Electric Power: 0.69 kW x 2 Hjdpfeb Al Sbox Ab Ssni Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of Filters: 3 Filter Surface Area: 22.5 m² Fan: Aluminium Fan Noise Level: 74 dBa Air Consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available on request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995,

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kaina taikoma visam komplektui kartu. Puikiai tinka pradėti šilkografijos veiklą, menininkų studijai, menininkams. Rinkinį sudaro: 1. ŠILKOGRAFIJOS KARUSELĖ, X 4 STALAI, PILNAI REGULIUOJAMA Hnedpfxexwnw Ao Ab Sei 2. DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS 3. AUTOMATINIS FLASH DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS VISKAS NAUJA, IŠPAKUOTA IŠ DĖŽIŲ.

Būklė: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit Hnedjif Upfspfx Ab Sji 2 modèles disponibles

Būklė: naujas, VERKAUF AB LAGER Tragfähigkeit: 240 kg Max. Plattformhöhe: 4 m Anzahl der Bediener: 1 Plattformabmessungen: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattformausschub: 0,55 m Ausschubkapazität: 100 kg Hub-/Senkzeit: 34/25 sek Wendekreis: 0 Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Hsdpfxjulah No Ab Seni Fahrgeschwindigkeit (angehoben): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Nicht-markierende Bereifung Automatisches Bremssystem Notablasssystem Not-Aus-Taster Zylinderhalteventil Integriertes Diagnosesystem

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, 4 Stk. Edelstahltrichter 3 Stk. Trichter Abmessungen: 700 mm x 1200 mm x 1220 mm (Höhe) 1 Stk. Trichter mit Abmessungen: 1200 mm x 1200 mm x 1220 mm (Höhe) Mit Hand-Absperrschieber Gasdruckdämpfer für Deckelöffnung Innenliegendes Edelstahl-Siebsieb Mobil auf arretierbaren Lenkrollen Teilweise mit pneumatischer Vibrationsvorrichtung Teilweise mit Füllstandsensor Hnedpfx Aeurf Twjb Sji In exzellentem Zustand

Būklė: naudotas, Nordson ProBlue 4 Heißleimpumpe Modell ProBlue 4 Komplett mit 2 beheizten Schläuchen und Auftragsdüsen, Luftmagnetventil & Modulen Behälter für Klebstoffauftrag / Aufbewahrungsbehälter Hsdewq Sv Espfx Ab Sjni Montiert auf einem Edelstahlrahmen

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 850 mm, pjūklų disko skylė: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: up to 40 pieces Control and Software Control System: Industrial PC with Siemens standard PLC Software: For all tooth forms, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks up the top saw blade from Magazine 1 and transfers it to the Woodtronic NC4; the cover is opened. 2nd Step: Loader returns. Woodtronic NC4 is closed and the grinding program begins. The loader removes the spacer ring from Magazine 1 and transfers it to Magazine 2. Waiting position. 3rd Step: After completion of the grinding process and opening of the Woodtronic, the loader removes the ground saw blade and transfers it to Magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding process is complete. Pre-programming possible: Grinding operation continues without interruption even while programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and operates automatically at night. Measurables with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth form: manual input required Hodpfoypbx Esx Ab Ssni MACHINE DETAILS Operating hours: 4,197 h (according to previous owner, information not verified) EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Gamybos metai: 2024, veikimo valandos: 500 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Geros buklės, viskas veikia nepriekaištingai Hjdpfx Aoya Eccob Ssni

Būklė: labai geros būklės (naudotas), Katalogo Nr.: 7923 Hjdpfx Asyug Euob Sjni TECHNINIAI DUOMENYS Įkrovimo bunkerio įėjimas: 800x600 mm Susmulkintos medienos išėjimas: fi 150 mm Rotoriaus darbinis plotis: 590 mm Pagrindinis variklis: 18,5 kW Siurblio variklis: 0,75 kW Peilių kiekis: 14 vnt. Peilio matmenys: 30x30 mm Sietas: 15/20 mm Spaudimo stalčius Elektrinis autoreversas Matmenys (I/P/A): 1750x1200x2000 mm Svoris: 1100 kg PRIVALUMAI – Vokiška gamyba – DTR dokumentacija – Spaudimo stalčius – Autoreversas – Naudotas smulkintuvas, labai gera būklė Grynoji kaina: 35 900 PLN Grynoji kaina: 8 550 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (Didelių valiutų svyravimų atveju kaina gali keistis)

Būklė: labai geros būklės (naudotas), Katalogo numeris: 7924 TECHNINIAI DUOMENYS Viršutinio bunkerio matmenys (ilgis/plotis): 500x600 mm Bunkerio ilgis: 2070 mm Veleno plotis: 550 mm Variklis: 55 kW Peilių kiekis: 4 vnt Išleidimas smulkintai medienai: stačiakampis 560/360 mm Išmatavimai ilgis/plotis/aukštis: 3950x1520x2820 mm Svoris apie: 2500 kg – Būgninė skaldyklė – 4 peiliai ant veleno – Papildomas integruotas ventiliatorius drožlių pūtimui – Labai gera būklė – Naudota skaldyklė Grynoji kaina: 23 900 PLN Grynoji kaina: 5 690 EUR Hnedpfjyug Ddjx Ab Sei Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (esant dideliems kurso svyravimams, kaina gali keistis)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Modelis DC3000 iš CORMAK yra pažangus drožlių ciklonas, sukurtas intensyviems dulkių surinkimo procesams medienos, baldų ir metalo pramonėje. Dėl modernios cikloninės separatoriaus sistemos, galingo drožlių ventiliatoriaus ir dvigubos filtravimo sistemos įrenginys efektyviai valo orą nuo smulkių ir stambių dulkių frakcijų. DC3000 drožlių nutraukėjas pasižymi automatiniu filtro nukratymu, kuris žymiai pagerina kasdienį darbo komfortą ir efektyvumą. Techninės specifikacijos: Ištraukimo našumas: 2000–7000 m³/h Hnodpfjwwtz Nex Ab Ssi Ventiliatoriaus apsisukimai: 2800 aps./min Siurbimo jungčių diametras: 3 x 100 mm / 1 x 200 mm Talpų skaičius: 2 Variklio galia: 3 kW / 400 V Matmenys: 1300 x 1000 x 2200 mm Svoris: 219 kg Standartinė komplektacija: Automatinis filtrų nukratytuvas Manometras Dviguba filtravimo sistema (pagrindinis ir preliminarus filtras) Metalinė talpa po separatoriumi Transportavimo ratukai