Oro Ištraukimo 4 Krepšys pirkti naudotą (41 909)

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), Four-sided planer, 8-head HARBS. Long infeed table: 3 meters. Machine weight: 5,500 kg. Gjdpfjl Dw Nxsx Acuekc Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm.

Sąlyga: naujas, Gamybos metai: 2025, Sizi 7/24 arayabilirsiniz: Satılık elek sistemi Titreşimli elek sistemlerimiz, yüksek performans ve dayanıklılığı bir araya getirerek üretim süreçlerinizi daha verimli hale getirir. CVS-1240, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 ve CVS-2470 modellerimiz, farklı kat sayısı ve ebat seçenekleriyle ihtiyaçlarınıza uygun çözümler sunar. Her bir model, 2 ila 4 kat arasında değişen kat sayıları ve yüksek üretim kapasiteleriyle maksimum verim sağlar. Gkjdpeuf D Hbefx Acujc Titreşimli elek sistemlerimiz 70 t/s - 336 t/s arası üretim kapasiteleri ile tüm üretim ihtiyaçlarınıza cevap verir. Örneğin, CVS-1240 modelimiz 1.200 x 4.000 mm katlarıyla 70-95 t/s üretim kapasitesine sahip olup sadece 7,5 kW motor gücüyle çalışır. Diğer modellerimiz ise daha yüksek kapasiteler ve çeşitli motor güçleriyle öne çıkar. Özellikle CVS-2470 modelimiz, 2.400 x 7.000 mm katları ve çift motor gücüyle 336 t/s’ye kadar üretim yapabilir. Her bir titreşimli elek sistemimiz, sağlam yapısı ve yüksek kapasitesiyle uzun ömürlü kullanım sunar. 7.400 kg’dan 24.000 kg’a kadar ağırlıklarıyla güvenilir ve dayanıklıdır. Hem yüksek verimliliği hem de düşük enerji tüketimi sayesinde üretim kapasitenizi artırırken maliyetlerinizi düşürmenize yardımcı olur. Titreşimli eleklerimiz, her türlü malzemeyi hızlı ve etkili bir şekilde eleme kapasitesine sahiptir. Üretim süreçlerinizi optimize etmek, verimliliği artırmak ve maliyetleri düşürmek için tasarlanmıştır. Her model, çeşitli kat seçenekleri ve üretim kapasiteleriyle esnek çözümler sunar. Yüksek kalite ve güvenilir performansı sayesinde uzun yıllar sorunsuz çalışır. Ürünlerimiz, üstün mühendislik ve yenilikçi tasarımı birleştirerek en iyi sonuçları sunar. Üretim süreçlerinizde fark yaratmak için titreşimli elek sistemlerimizi tercih edin.

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 1 800 h, No. 3131 CNC Machining Center FORMAT-4 profit H10 22.43 Used, year of manufacture: 2017 Operating hours: approx. 1,800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, loading unit FORMAT-4 L-Motion, and extraction system FELDER RL 300 Technical Data – CNC Machining Center FORMAT-4 profit H10 22.43: - Matrix table system made of phenolic resin - Grid table with two stop rows - Automatic central lubrication - HARDWARE control computer - Mobile control console - Handheld terminal for remote axis control - Two vacuum pumps, rated output 2 x 250 m³/h - Tool changer with 10 tools - Tool changer on the left in the machine frame: 8 tool positions for HSK - Milling spindle 12 kW (S6) HSK F63, 24,000 rpm - Central extraction via combined connections (D = 250 mm) - Woodflash software German version (H20/H08/H10/H50) - Axis travel path H10 22.43: X = 5,230 mm / Y = 2,560 mm / Z = 280 mm - Working area: X = 4,300 mm / Y = 2,160 mm / Z = 105 mm - Axis positioning speed: X = 100 m/min / Y = 100 m/min / Z = 30 m/min Technical Data – Loading Unit FORMAT-4 L-Motion: - Year of manufacture: 2017 - 2-axis design with 4 storage positions for feeding a H10 with lift table - CNC loading - Gentle transport - Fully automatic panel handling - Workpiece sizes: Length 2,000–4,200 mm / Width 600–2,100 mm / Thickness from 8 mm / Panel weight 200 kg - Density: Chipboard 650 kg/m³ / Raw MDF 750 kg/m³ - Stack height 1,800 mm Technical Data – Extraction System FELDER RL 300: - Year of manufacture: 2023 - Rated volume flow 6,000 m³/h, H3 GS dust-tested, JET cleaning - Compressed air connection 3/4-inch - Connection pressure 7–12 bar at 40 NL/min - Operating pressure in device: 6 bar - Chip container capacity: 500 l - Extinguishing device with dry powder extinguisher 12 kg Sale on behalf of customer, ex location Leipzig, without dismantling, without transport or installation Subject to errors in description and price Dismantling and loading by us available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in as-is condition Technical specifications, condition descriptions, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Images and videos are sample representations and do not reflect the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex works Gkodperrh T Aofx Acuoc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 700 mm, pjūklo juostos plotis: 41 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 600 mm, bendras plotis: 2 400 mm, padavimo ilgis X ašis: 600 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, pjovimo plotis (maks.): 400 mm, stalo aukštis: 700 mm, bendras svoris: 2 200 kg, pjovimo aukštis (maks.): 400 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty design, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades—including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bimetal and carbide-tipped saw bands. The saw unit is made from solid polymer concrete, ensuring maximum running smoothness and extended saw band life. The saw unit is guided by two vertical square columns (twin-column guide), with hardened and ground guide rails. The saw band is hydraulically tensioned, and carbide saw band guides are hydraulically preloaded. Material clamping is achieved with two horizontal frame clamps. Material feed is facilitated by a non-driven roller conveyor with twelve transport rollers integrated into the machine, allowing even short remnants to be transported without issue. Year of manufacture: 2004 Cutting range round: 400 mm Cutting range square: 400x400 mm Automatic material feed: 600 mm Multiple material feed: 99,999 mm Cutting speed: stepless, 20–130 m/min Gkedpfx Acjupvrxsuec Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant piece length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg // Equipment: Coolant system Full enclosure CNC control Idle monitoring Band tracking control Side guide rollers Height measurement system Light barrier

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 121 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 320.04.001.21, X ašies eiga: 5 230 mm, Y ašies eiga: 2 560 mm, Z ašies eigos atstumas: 280 mm, ruošinio aukštis (maks.): 105 mm, bendras svoris: 4 100 kg, FOR SALE: CNC FELDER FORMAT 4 + FELDER RL 350 Extraction System incl. Ductwork + Tools (Router bits) FELDER FORMAT 4 Gkjdjwc R D Eepfx Acuec • Model: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121h • Safety system with foot mats • Mobile control panel with monitor, keyboard, and mouse • 2 standard vacuum pumps, each with a rated output of 250 m³ + special configuration with a third extraction pump for maximum cleanliness during milling operations • Tool changer with 8 positions FELDER RL 350 Extraction Unit incl. ductwork • 3 x 400V, 50Hz, 15HP, 11kW • Maximum air flow: 8,000 m³/h • Nominal air flow: 20 m/sec, 6,920 m³/h • Negative pressure: 2,630 Pa • Filter surface: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Sąlyga: geras (naudotas), 4 x Bonfiglioli wind turbine gearboxes JB00001227 SN B6201603697 Gkjdpfjwg E Utjx Acuec

Sąlyga: paruoštas naudoti (naudotas), valdiklio modelis: Haas, tuščias svoris: 12 000 kg, bendras ilgis: 5 950 mm, bendras plotis: 3 048 mm, bendras aukštis: 2 200 mm, sūpynės skersmuo virš skersinio vežimo: 2 000 mm, CNC holle-as slant bed 'oil country' draaibank Zwaai over het bed: 1350 mm Zwaai over de dwarssupport: 400 mm Diameter van de spilboring: 270 mm (!!) Spilvermogen: 55 pk Aantal toerentallen: 1 > 500 tpm Gkodpfx Aswu Ipiecujc Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband

Sąlyga: geras (naudotas), Gamybos metai: 2005, bendras ilgis: 4 200 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 800 mm, produkto aukštis (maks.): 4 mm, bendras svoris: 7 000 kg, Cutting capacity: 4 mm, cutting length: 3050 mm, throat depth: 350 mm, motor: 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions: 420x250x180 cm, approx. 6,500 kg Gedpstp I S Ajfx Acuskc

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Gksdpfed Tqaljx Acujc Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100-1100 kW - Version: ZM-LN - Year of manufacture: 2020 Gkodpfxewgyrto Acuoc 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100-1000 kW - Version: ZM - Year of manufacture: 2013

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, lentynos aukštis: 3 500 mm, atrama ilgis: 2 700 mm, lentyna ilgis: 8 500 mm, rėmo aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, rėmo plotis: 1 100 mm, lentynų eilučių skaičius: 4, padėklų vietos: 108 euro padėklai, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment Gkodsv Ukz Aspfx Acujc - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 000 mm, bendras svoris: 1 300 kg, Technical Data: Gsdpevuphusfx Acuskc Hopper opening: Length x Width 1250 x 1000 mm Length x Width 1250 x 1000 mm Cutting unit opening: Length x Width 562 x 462 mm Number of shafts: 4 of which: Cutting shafts 2 Number of cutting discs: 23 Shaft speed: 25 rpm.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, 4 spausdinimo agregatai 12" Gkodpfx Acswhqnzsusc vandens aušinimo įrenginys 2 perforavimo agregatai Gera techninė būklė Šiuo metu dirba gamyboje

Sąlyga: naujas, Gamybos metai: 2025, Mūsų vibracinių sijotuvų sistemos padės padidinti jūsų gamybos efektyvumą, suderindamos aukštą našumą ir ilgaamžiškumą. Galite su mumis susisiekti bet kuriuo paros metu dėl vibracinės sijotuvo sistemos įsigijimo. Gkedpfx Aeud Tbrjcusc CVS-1240, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 ir CVS-2470 modeliai suteikia skirtingo sluoksnių skaičiaus ir dydžio pasirinkimus, kad atitiktų jūsų poreikius. Kiekvieno modelio efektyvumas maksimalus – sluoksnių skaičius nuo 2 iki 4, o gamybos pajėgumai itin dideli. Vibracinės sijotuvų sistemos atitinka visus jūsų gamybos poreikius su pajėgumais nuo 70 t/h iki 336 t/h. Pavyzdžiui, CVS-1240 modelio gamybos pajėgumas siekia 70–95 t/h (sluoksnio matmenys 1 200 x 4 000 mm), naudojant tik 7,5 kW variklį. Kiti mūsų modeliai pasižymi dar didesnėmis apimtimis ir įvairiomis variklių galiomis. Ypatingai CVS-2470 modelis gali pasiekti iki 336 t/h našumą su 2 400 x 7 000 mm sluoksniais ir dviem varikliais. Visos mūsų vibracinių sijotuvų sistemos užtikrina ilgalaikį ir patikimą naudojimą dėl tvirtos konstrukcijos ir aukšto našumo. Jų svoris svyruoja nuo 7 400 kg iki 24 000 kg, todėl jos yra patikimos ir atsparios. Vibro sijotuvai leidžia padidinti gamybos pajėgumą mažinant sąnaudas dėl aukšto efektyvumo ir mažų energijos sąnaudų. Mūsų vibracinių sijotuvų sistemos greitai ir efektyviai perrinkia įvairias medžiagas. Jos sukurtos optimizuoti jūsų gamybos procesus, padidinti produktyvumą ir sumažinti kaštus. Kiekvienas modelis siūlo lanksčius sprendimus, skirtingų sluoksnių ir pajėgumų pasirinkimus. Dėl aukštos kokybės bei patikimumo, šios sistemos dirba be trikdžių daugelį metų. Mūsų produktai sujungia pažangią inžineriją ir inovatyvų dizainą, kad gautumėte geriausius rezultatus. Išskirkite savo gamybos procesus su mūsų vibracinėmis sijotuvo sistemomis.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Gsdpfxofdkb Tj Acujkc Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Sąlyga: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit Godpfsif Upfex Acuekc 2 modèles disponibles

Sąlyga: naujas, VERKAUF AB LAGER Tragfähigkeit: 240 kg Max. Plattformhöhe: 4 m Anzahl der Bediener: 1 Plattformabmessungen: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattformausschub: 0,55 m Gkedoulah Nspfx Acujc Ausschubkapazität: 100 kg Hub-/Senkzeit: 34/25 sek Wendekreis: 0 Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Fahrgeschwindigkeit (angehoben): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Nicht-markierende Bereifung Automatisches Bremssystem Notablasssystem Not-Aus-Taster Zylinderhalteventil Integriertes Diagnosesystem

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, 4 Stk. Edelstahltrichter 3 Stk. Trichter Abmessungen: 700 mm x 1200 mm x 1220 mm (Höhe) 1 Stk. Trichter mit Abmessungen: 1200 mm x 1200 mm x 1220 mm (Höhe) Mit Hand-Absperrschieber Gasdruckdämpfer für Deckelöffnung Innenliegendes Edelstahl-Siebsieb Mobil auf arretierbaren Lenkrollen Teilweise mit pneumatischer Vibrationsvorrichtung Gkedpfxsurf Twe Acusc Teilweise mit Füllstandsensor In exzellentem Zustand

Sąlyga: naujas, Gamybos metai: 2025, Sie können uns rund um die Uhr für den Verkauf von Schwingsieb-Anlagen kontaktieren. Unsere Schwingsieb-Anlagen steigern Ihre Produktionseffizienz durch hohe Leistungsfähigkeit und Langlebigkeit. Die Modelle CVS-1240, CVS-1640, CVS-1650, CVS-1850, CVS-2050, CVS-2060 und CVS-2470 bieten mit unterschiedlichen Siebdecks und Größen vielfältige Optionen, die auf Ihre Anforderungen zugeschnitten sind. Jedes Modell gewährleistet maximale Effizienz dank 2 bis 4 Siebdecks und hoher Produktionskapazität. Unsere Schwingsieb-Anlagen decken mit Förderleistungen von 70 t/h bis 336 t/h sämtliche Produktionsanforderungen ab. Beispielsweise bietet das Modell CVS-1240 mit Siebdecks von 1.200 x 4.000 mm und einem Motor mit nur 7,5 kW eine Produktionskapazität von 70 bis 95 t/h. Unsere anderen Modelle zeichnen sich durch höhere Kapazitäten und verschiedene Motorleistungen aus. Besonders das Modell CVS-2470 erreicht mit Siebdecks von 2.400 x 7.000 mm und Doppelantrieb bis zu 336 t/h. Gedpfx Aceud Tdasuekc Jede unserer Schwingsieb-Anlagen sichert Ihnen durch ihre robuste Konstruktion und hohe Kapazität eine langfristige und zuverlässige Nutzung. Mit Gewichten von 7.400 kg bis 24.000 kg sind sie besonders stabil und widerstandsfähig. So können Sie Ihre Produktionsleistung steigern und zugleich Ihre Betriebskosten durch hohe Effizienz und geringen Energieverbrauch senken. Unsere Schwingsieb-Anlagen sind für die schnelle und effiziente Absiebung unterschiedlichster Materialien ausgelegt. Sie optimieren Ihre Produktionsprozesse, erhöhen die Produktivität und minimieren die Kosten. Jedes Modell bietet mit flexiblen Siebdeck-Varianten und verschiedenen Förderleistungen maßgeschneiderte Lösungen. Dank hochwertiger Verarbeitung und verlässlicher Leistung arbeiten sie jahrelang störungsfrei. Unsere Produkte vereinen fortschrittliche Ingenieurskunst mit innovativem Design und liefern Ihnen stets beste Ergebnisse. Setzen Sie mit unseren Schwingsieb-Anlagen Maßstäbe in Ihrer Produktion.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. Gkodpfxjfdkb Uj Acuec When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Godofdkbhspfx Acujkc - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Gkodpfx Asd Tbbdjcujc Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Gjdpfxoguk Dko Acujkc Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm Gjdpfx Aeguk Dvjcuokc - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Gkjdeguk A Hspfx Acuec Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.