Optimum B 33 Pro pirkti naudotą (130)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Optimum
Paspaudimas
Mannheim
1 217 km
Suolelio gręžtuvas
OPTIMUMOPTIDRILL D23 PRO
Sąlyga: naudotas, 1 vnt. stalinio gręžimo staklių OPTIMUM OPTIDRILL D23 PRO su spaustuvu ir stalu, pagal nuotraukas ir apžiūrą. Būklė: naudota. Mokėjimo būdas: išankstinis apmokėjimas banko pavedimu. Prekių sandėliavimo vieta: dirbtuvės. Pristatymas: tik atsiėmimas vietoje – šiai pozicijai siuntimas nesiūlomas!
Kfodjx Ifniopfx Abkoa
Mažas skelbimas
Hallstadt
1 054 km
Centro tekinimo staklės
optimumTH5620V
Skambinti
Sąlyga: naudotas, Gamybos metai: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, traces of use present
- Hardened and ground Z-axis guideways
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Precisely machined carriage
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- All guides adjustable via gib strips
- Shafts, gears, and main spindle running in oil bath
- Cross-slide adjustment range ± 90°
- Guaranteed spindle nose run-out accuracy better than 0.015 mm
- Easy-running, hardened and ground gearbox gears mounted in 2 adjustable precision taper roller bearings
- Clearly arranged selection levers for feed speed adjustment
- Enclosed design of the quick-shift feed gearbox
- Gears and shafts hardened and ground, running in precision bearings in an oil bath
- Switch with life-cycle calculation, tested according to EN ISO 13849
- Bed carriage forward/reverse operation switchable via control spindle
- Central lubrication in bed carriage
- Leadscrew cover
- Emergency stop impact switch, motor protection switch, lockable main switch
- Tailstock quill and handwheel with adjustable fine scaling 0.025 mm
- Quick, easy, and tool-free adjustment via clamping lever
- Heavily ribbed prism bed, induction hardened and precision ground, made from cast iron
- Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete draining and cleaning per DIN
- LED machine lamp in chip guard
- Two gearbox speed ranges
- Spindle bore / bar capacity Ø 105 mm
- Siemens Sinamics frequency inverter / Safety Integrated
- Energy chain for protective cable and hose routing
- Thread dial indicator scale adjustable
- Quick-change tool post SWH 7-C
- 1 tool holder 32 x 150 type D for 25 mm square tool bits
- Digital position display DPA 21
- Glass scales
Dimensions and weights
Length approx. 3450 mm
Width/depth approx. 1150 mm
Height approx. 1650 mm
Weight approx. 2560 kg
Working ranges
Centre height: 280 mm
Centre distance: 1910 mm
Swing diameter over bed: 560 mm
Swing diameter in bed gap: 790 mm
Swing diameter over cross-slide: 355 mm
Turning length in bed gap: 170 mm
Bed width: 350 mm
Speed range
Number of speed ranges: 2
Speed range: 25 – 1600 rpm
Spindle speed control: electronically adjustable
Electrical data
Output power (motor): 7.5 kW
Total connected load: 8.5 kW
Connection voltage: 400 V
Network frequency: 50 Hz
Coolant system
Coolant pump power: 125 W
Standards and approvals
Standard: DIN EN 55011
Tailstock
Quill taper: MK 5
Quill travel: 180 mm
Quill diameter: 75 mm
Tool post mounting height max.: 25 mm
Spindle taper: Ø 113 (taper 1:20) mm
Thread cutting
Metric pitch: 0.1 - 14 mm/rev
Number of metric pitches: 47
Inch pitch: 112 - 2 TPI
Number of inch pitches: 60
Diametral pitch: 4 – 112 DP
Kedpfx Aex Dzxajbkefa
Number of diametral pitches: 50
Module thread pitch: 0.1 - 7 mm/rev
Number of module thread pitches: 34
Travels
Compound slide travel: 130 mm
Cross-slide travel: 316 mm
Bed carriage travel: 1710 mm
Feed range
Longitudinal feed: 0.031 - 1.7 mm/rev
Number of longitudinal feeds: 42
Plan feed range: 0.014 - 0.784 mm/rev
Number of plan feeds: 42
Mažas skelbimas
Sankt Egidien
894 km
Suoliukas gręžtuvas
OptimumDP 26V-T
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, For information on delivery times and current daily prices, please inquire directly.
Industrial Motor
Quiet-running spindle thanks to new spindle design
Kjdpfxsq T Ruhe Abkefa
Machine operation with safety electrics operating at 24V DC
Guaranteed spindle run-out accuracy ≤ 0.02 mm measured at the drill spindle
Forward/reverse rotation
Precision spindle bore
Control panel with user-friendly, dirt- and water-resistant membrane keypad
Speed display
Separate emergency stop push button
Thread cutting function
Precisely machined, stable drill table with diagonal T-slots and perimeter coolant channel, tiltable sideways by ±45° and rotatable by 360°
Digital depth gauge
Integrated LED machine light in the drill head
V-belt cover with safety switch
Thick-walled steel column for high load capacity and stability
Massive, large-sized base plate with T-slots
Heavy-duty design throughout the entire machine
Mažas skelbimas
Bruchsal
1 243 km
Vedamoji/traukos veleno tekinimo staklės / Optimum
OPTIMUMD560x1500
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2008, Optimum D560x1500 vedimo ir traukos sriegiklio tekinimo staklės
- CE žymėjimas
- Pagaminimo metai: 2008
- Skaitmeninis ekranas 3 ašyse
- Centrinis aukštis: 280 mm
- Tekėjimo skersmuo virš lovos: 560 mm
- Tekėjimo skersmuo virš vežimo: 355 mm
- Tekėjimo skersmuo tilte: 790 mm
- Centro atstumas: 1500 mm
- Strypo praėjimas: 55 mm
- Sukimosi greičio diapazonas / pavarų dėžė: 25–1600 aps./min.
- Pailga pastūma: 0,059–1,646 mm/aps.
- Skersinė pastūma: 0,02–0,537 mm/aps.
- Šliužo konusas MK5 / ištrauka: 180 mm
- 3 žandų griebtuvas 300 mm + keičiami žandai
- Greitai keičiama galvutė su įdėklais
- Aušinimo skysčio sistema
- Variklio galingumas: 7,5 kW
Kfedpfxjx I Ni De Abksa
- Dokumentacija
Matmenys: Ilgis x Plotis x Aukštis 3x1,4x1,7 m / Svoris 2300 kg
Galimos klaidos ar netikslumai yra pasiliekami.
Mažas skelbimas
Miastko
465 km
Gręžti
OptimumOpti F45
Skambinti
Sąlyga: labai geros būklės (naudotas), Kryžminis stalas 24x82 cm, variklis 1,1 kW
Kfedpfx Aboxq Rihjkea
Mažas skelbimas
Niederlangen
1 113 km
Dvigubas šlifavimo blokas
OPTIMUMOptiGrind GU 15
Skambinti
Gamybos metai: 2015, Sąlyga: naudotas, Grinding wheel diameter max. 150 mm
Speed 2850 rpm
Total power requirement 0.45 kW
Dimensions 465 x 316 x 302 mm
Weight 10.7 kg
Kfsdpfxjwp S U Es Abkoa
NEW PRICE: ~ EUR 200.00
Description
- Double-wheeled grinding machines from OPTIMUM - a quality product for trade and industry
- Heavy-duty, durable industrial design with maintenance-free motor for continuous operation
- Housing made of die-cast aluminium
- Extended service life and smooth running due to balanced rotor with quality ball bearings
- Spark guard on each grinding wheel to reduce spark emission
- Sturdy, adjustable workpiece support
- Safety screens made from shatter-proof material
- Vibration-damping rubber feet
- Two universal corundum grinding wheels
Paspaudimas
Parsberg
1 058 km
Suoliukas gręžtuvas
OPTIMUMOPTI B20T
Sąlyga: naudotas, Gamybos metai: 1994, 1 vnt. stalinio grąžto OPTIMUM OPTI B20T Gręžimo galia: 20 mm, serijos numeris 19400 Gamintojas: OPTIMUM Tipas: OPTI B20T Spalva: pilka Pagaminimo metai: 1994 Priedai: su 2 staklėmis Spaustuvas Naudojimo vieta: sandėlis Būklė: naudotas
Ksdpsx A A I Tofx Abkofa
Mažas skelbimas
Hallstadt
1 054 km
Juostinis pjūklas
OptimumOptisaw SD500AV
Skambinti
Sąlyga: naudotas, Gamybos metai: 2024, Optimum Optisaw SD500AV – Variable Band Saw with Siemens Inverter
Used bandsaw with signs of use
- Heavy-duty industrial design
- Quiet operation
- Manual or semi-automatic operation
- Infinitely variable bandsaw speed from 20–80 m/min
- High cutting precision due to vibration-free running
- Mitre adjustment from -45° to +60° by swiveling the entire saw frame
- Supplied as standard with high-quality bi-metal saw blade
- Microswitch for automatic shut-off
- Coolant pump
- Ball-bearing saw blade guides with carbide inserts for optimal cutting results
- Easy adjustment of lowering speed via feed control valve on the control panel
- Large, hydraulically quick-release vice, self-closing, laterally adjustable
- Manometer for accurate saw blade tensioning
- Clear, user-friendly control panel
Semi-automatic operation procedure:
- Closing the vice and starting the motor
- Lowering of saw frame for cutting
- Stopping the motor and returning saw frame to starting position
Dimensions and Weights
Length approx.: 2129 mm
Width/depth approx.: 1046 mm
Height approx.: 1687 mm
Kjdpfex Dzv Eox Abkjfa
Weight approx.: 645 kg
Electrical Data
Output power (motor): 3 kW
Hydraulic pump motor power: 1.4 kW
Coolant pump motor power: 0.1 kW
Total connected load: 3.8 kW
Operating voltage: 400 V
Mains frequency: 50 Hz
Machine Data
Saw blade speed: 20–80 m/min
Saw blade length: 3770 mm
Saw blade width: 34 mm
Saw blade thickness: 1.1 mm
Cutting angle range: -45° to +60°
Manual operation: hydraulic via push button
Semi-automatic operation: automatic
Continuous real-time data generation: Yes
Data storage location: On the device
Data access: Via wireless interfaces
Cutting Capacities
0° round (solid material): 355 mm
0° square (solid material): 300 mm
0° rectangle vertical (solid material): 300 x 490 mm
-45° round (solid material): 290 mm
-45° square (solid material): 250 mm
-45° rectangle vertical (solid material): 250 x 250 mm
+45° round (solid material): 350 mm
+45° square (solid material): 290 mm
+45° rectangle vertical (solid material): 290 x 340 mm
+60° round (solid material): 230 mm
+60° square (solid material): 180 mm
+60° rectangle vertical (solid material): 180 x 220 mm
Note on cutting range: The cutting range is determined based on the weight of the saw frame when cutting aluminum. It may vary when processing different materials and may in some cases be reduced (not to be confused with cutting capacity).
Mažas skelbimas
Sankt Egidien
894 km
Centro tekinimo staklės
OptimumOPTIturn TH 5630D
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire.
Dimensions and Weights:
Length (machine): approx. 4450 mm
Width/Depth (machine): approx. 1150 mm
Height (machine): approx. 1650 mm
Net weight: approx. 3000 kg
Working Ranges:
Center height: 280 mm
Kjdpoq Ukc Rofx Abkofa
Center distance: 2910 mm
Swing diameter over bed: 560 mm
Swing diameter in gap: 790 mm
Swing diameter over cross slide: 355 mm
Turning length in gap: 170 mm
Bed width: 350 mm
Speed Range:
Number of speed ranges: 12
Speed range: 25 – 1600 rpm
Electrical Data:
Main drive motor power: 7.5 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Coolant System:
Coolant pump motor power: 125 W
Spindle:
Spindle mount: Camlock DIN ISO 702-2 No. 8
Spindle bore/bar capacity diameter: 80 mm
Tool holder max. mounting height: 25 mm
Spindle taper: MT 7
Tailstock:
Tailstock taper: MT 5
Tailstock quill travel: 180 mm
Tailstock quill diameter: 75 mm
Threads:
Metric pitch: 0.2 – 14 mm/rev
Number of metric pitches: 47
Inch pitch: 112 – 2 TPI
Number of inch pitches: 60
Diametral pitch: 4 – 112 DP
Number of diametral pitches: 50
Module thread pitch: 0.1 – 7 mm/rev
Number of module pitches: 34
Travel:
Cross slide travel: 130 mm
Compound slide travel: 316 mm
Bed slide travel: 2710 mm
Feed:
Longitudinal feed range: 0.059 – 1.646 mm/rev
Number of longitudinal feeds: 35
Face feed range: 0.020 – 0.573 mm/rev
Number of face feeds: 35
Electrical Connection:
Total connected load: 8.5 kW
Mažas skelbimas
Bitburg
1 305 km
Dvigubo pasvirimo metalo juostinis pjūklas
OptimumSD 500
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Optimum Optisaw SD 500
Double Miter Metal Bandsaw
with Swiveling Saw Bow
Item No. 3292380
Dimensions
Length approx. 2122 mm
Width/Depth approx. 1046 mm
Height approx. 1497 mm
Weight approx. 522 kg
Electrical Data
Coolant Pump Motor Power: 100 W
Total Connected Load: 3.8 kW
Supply Voltage: 400 V
Mains Frequency: 50 Hz
Machine Data
Blade Speed(s): 35 / 70 m/min
Blade Length: 3770 mm
Blade Width: 34 mm
Blade Thickness: 1.1 mm
Cutting Angle: 45° to -60°
Feed: Hydraulic via lowering cylinder
Raising the saw bow: manual
Cutting Capacities
0° round (solid material): 355 mm
0° square (solid material): 280 mm
0° rectangle vertical (solid material): 280 x 490 mm
-45° round (solid material): 290 mm
-45° square (solid material): 250 mm
-45° rectangle vertical (solid material): 250 x 250 mm
+45° round (solid material): 355 mm
+45° square (solid material): 280 mm
+45° rectangle vertical (solid material): 280 x 340 mm
+60° round (solid material): 230 mm
+60° square (solid material): 180 mm
Kfsdpfegd Si Ejx Abkja
+60° rectangle vertical (solid material): 180 x 220 mm
Heavy-duty industrial design
Low-noise operation
High cutting accuracy due to vibration-free running
Miter adjustment from -45° to +60° by swiveling the entire saw bow
Supplied as standard with high-quality bi-metal saw blade
Micro switch for automatic shutoff
Coolant pump
Ball-bearing saw blade guide with carbide inserts for optimal cutting results
Easy adjustment of lowering speed via feed control valve on the control panel
Large, quick-release vice, laterally adjustable
Clear & intuitive control panel
Location: Ex stock 54634 Bitburg
- Immediately available -
Paspaudimas
Parsberg
1 058 km
Metalo juostinis pjūklas
OPTIMUMS275NV
Sąlyga: naudotas, Gamybos metai: 2022, 1 vnt. metalo juostinis pjūklas OPTIMUM S275NV
dar su ritinėliais OPTIMUM 5x MSR 10 ilgis apie 340 cm, 1x MSR7 ilgis apie 190 cm
Gamintojas: OPTIMUM
Kodpfx Abjx A A Hvskofa
Tipas: S275NV
Spalva: pilka
Išmatavimai: 100x50x140 cm
Pagaminimo metai: 2022
Naudojimo vieta: gamybos salė
Būklė: naudota
Mažas skelbimas
Hallstadt
1 054 km
Gręžimo staklės
OptimumF110 ECO
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine currently on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer.
F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life.
Model: F110 ECO
Control: SIEMENS SINUMERIK 828D PPU271.5
Milling spindle with belt drive
Machine specifications
Electrical connection: 400 V / ~50 Hz
Total connected load: 15 kVA
Milling spindle
Drive motor S1 operation: 7.5 kW
Torque drive motor S1 operation: 45 Nm
Drive motor S6 30% operation: 16.2 kW
Torque drive motor S6 30% operation: 103 Nm
Spindle taper: BT40
Coolant system
Coolant pump power: 900 W
Max. delivery rate: 35 l/min.
Tank capacity: 116 liters
Cleaning pump
Milling precision
Repeatability: 0.008 mm
Positioning accuracy: 0.004 mm
Kedpsw Edbpjfx Abkjfa
Tool changer
Type: Double-arm gripper
Number of tool stations: 20
Max. tool diameter: 78 mm
Max. tool diameter (adjacent tool stations empty): 120 mm
Tool length: 300 mm
Max. tool weight: 8 kg
Tool change time (tool-to-tool): 2.5 seconds
Travel distances
X-axis: 650 mm
Y-axis: 400 mm
Z-axis: 500 mm
Feed drives
Rapid traverse X, Y, Z: 48 / 48 / 32 m/min
Motor torque X / Y / Z: 11 Nm / 11 Nm / 20 Nm
Feed forces
X / Y / Z: 3.67 kN / 3.67 kN / 6.68 kN
Spindle speed range
Speeds*: 8,000 rpm
Pneumatics
Compressed air: 6 bar
Air consumption per hour: 6 – 8 kg/m³
Milling table
Distance spindle to table: 100 – 600 mm
Table length × width: 800 × 400 mm
T-slot size / number / spacing: 18 mm / 3 / 100 mm
Maximum payload: 400 kg
Dimensions
Length × width × height: 2,100 × 2,300 × 2,750 mm
Total weight: 4,300 kg
Equipment
Linear guides with recirculating ball screws for high rapid traverse speeds on all axes
Telescopic way covers on all three axes
Automatic lubrication
Portable electronic handwheel with enabling button and emergency stop button
RJ45 port and 230 V power outlet
Machine lamp in working area
Cleaning gun
Ball screws and linear guides from THK
Chip flush
Spindle head cooling (machining area)
Electrical cabinet
Arm-type tool changer
SW24
CE
*Additional options available
Mažas skelbimas
Sankt Egidien
894 km
Centro tekinimo staklės
OptimumOPTIturn TH 4620D
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire.
Dimensions and Weights:
Length (product): approx. 3265 mm
Width/Depth (product): approx. 1065 mm
Height (product): approx. 1550 mm
Weight (net): approx. 1965 kg
Working Areas:
Centre height: 230 mm
Centre distance: 2060 mm
Swing diameter over bed: 460 mm
Swing diameter in gap: 690 mm
Swing diameter over cross slide: 270 mm
Turning length in gap: 240 mm
Kfedpfoq Ukbpox Abkja
Bed width: 300 mm
Speed Range:
Number of speed ranges: 12
Speed range: 25 – 2000 rpm
Electrical Data:
Main drive motor power: 5.5 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Coolant system
Coolant pump power: 125 W
Spindle:
Spindle mount: Camlock DIN ISO 702-2 No. 6
Spindle bore/bar capacity diameter: 58 mm
Max. tool holder height: 25 mm
Spindle taper: MT 6
Tailstock:
Tailstock taper: MT 4
Tailstock quill travel: 130 mm
Tailstock quill diameter: 60 mm
Thread Leads:
Metric pitch: 0.1 – 14 mm/rev
Number of metric threads: 41
Inch pitch: 112 – 2 TPI
Number of inch threads: 41
Diametral pitch: 4 – 112 DP
Number of diametral threads: 50
Module pitch: 0.1 – 7 mm/rev
Number of module threads: 34
Travels:
Cross slide travel: 125 mm
Compound slide travel: 285 mm
Bed carriage travel: 1805 mm
Feeds:
Longitudinal feed range: 0.031 – 1.7 mm/rev
Number of longitudinal feeds: 42
Cross feed range: 0.014 – 0.784 mm/rev
Number of cross feeds: 42
Electrical Connection:
Total connected load: 5.8 kW
Mažas skelbimas
Bitburg
1 305 km
Centrinė tekinimo ir veleno tekinimo staklės
OptimumOptiturn TU 2004V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, OPTIturn TU 2004V - Lathe with Infinitely Variable Speed Control and Digital Speed Display
Image shows OPTIturn TU 2004V
Lathe with infinitely variable speed control and digital speed display
Precision Manufacturing
- Heavily ribbed prism bed made of cast steel, inductively hardened and precision-ground
- Hardened and ground bed guideways
- Hardened spindle nose (DIN 6350)
- Guaranteed spindle nose runout accuracy better than 0.009 mm
- Automatic longitudinal/lead screw drive
- With longitudinal, cross, and compound slides
- Switchable right-left rotation from the control panel
- Emergency stop impact switch
- Chuck guard
- Thrust bearing
- Lead screw mounted in two sintered bearings
- Wide thread cutting range via change gear set
- Simple and fast speed changes via V-belt
- Change gear drive
- EMC filter class B (suitable for domestic use)
Features:
- Digital speed display
- Easy-to-read digital speed display
- Chip guard on compound slide
- Four-way tool post, rotatable
- Rolled trapezoidal leadscrew
- Lead screw
- Tailstock, offsettable for taper turning
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Main spindle, hardened and mounted in adjustable precision taper roller bearings
- Taper roller bearings, P5 quality
- Cylindrical centering fitting
- Hardened spindle nose with 21 mm spindle bore
- Chuck concentricity better than 0.04 mm
Scope of Delivery:
- 3-jaw chuck Ø 100 mm, self-centering
- Fixed center MT 2
- Fixed center MT 3
- Splash guard
- Chip tray
- Four-way tool post
- Change gear set
- Operating tools
Model: OPTIturn TU 2004V
Article No.: 3420310
Technical Data
- Electrical connection: 230 V / 1 Ph ~50 Hz
- Main spindle motor power: 600 W
Kodpfxscnxrcs Abkofa
- Spindle taper: MT 3
- Spindle bore: 21 mm
- 3-jaw chuck pass-through: 20 mm
- Tool post height max.: 12 mm
- Center height: 100 mm
- Distance between centers: 300 mm
- Turning diameter max.: 200 mm
- Swing over cross slide: 110 mm
- Bed width: 100 mm
- Spindle speed: 150 - 2,500 rpm
- Number of speed ranges: 2, electronically adjustable
- Compound slide travel: 55 mm
- Cross slide travel: 75 mm
- Longitudinal feed: 0.1 / 0.2 mm/rev
- Metric thread pitch range: 0.25 - 3 mm/rev (14)
- Imperial thread pitch range: 44 - 8 TPI (12)
- Tailstock taper: MT 2
- Tailstock quill stroke: 65 mm
- Dimensions (L x W x H): 830 x 425 x 360 mm
- Net weight: 61 kg
Mažas skelbimas
Hallstadt
1 054 km
Gręžimo staklės
OptimumF200 ECO
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display. Optimill F200 ECO Premium CNC milling machine directly from the manufacturer.
F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life.
Model: F200 ECO
Control: SIEMENS SINUMERIK 828D PPU271.5
Milling Spindle: Belt drive
Machine Data
Electrical connection: 400 V / ~50 Hz
Total connected load: 15 kVA
Milling Spindle
Drive motor S1 operation: 9 kW
Torque drive motor S1 operation: 57 Nm
Drive motor S6 30% operation: 17.1 kW
Torque drive motor S6 30% operation: 118 Nm
Spindle taper: BT40
Coolant system
Coolant pump power: 900 W
Max. delivery rate: 35 l/min
Tank capacity: 116 liters
Cleaning pump
Milling Precision
Repeatability: 0.008 mm
Positioning accuracy: 0.004 mm
Tool Changer
Type: Double arm gripper
Number of tool stations: 20
Max. tool diameter: 78 mm
Max. tool diameter (adjacent tool stations empty): 120 mm
Tool length: 300 mm
Max. tool weight: 8 kg
Tool change time (tool to tool): 2.5 seconds
Kfjdpfx Ajxyh Dbobkja
Travel
X-axis: 850 mm
Y-axis: 500 mm
Z-axis: 550 mm
Feed Drive
Rapid traverse X-, Y-, Z-axis: 48 / 48 / 48 m/min
Motor torque
X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm
Feed Forces
X-/Y-/Z-axis: 5.34 kN / 5.34 kN / 6.68 kN
Speed Range
Speeds*: 10,000 rpm
Pneumatics
Compressed air: 6 bar
Air consumption per hour: 6 – 8 kg/m³
Milling Table
Distance spindle to table: 100 – 650 mm
Table length x width: 1000 x 500 mm
T-slot size / number / spacing: 18 mm / 5 / 100 mm
Max. payload: 500 kg
Dimensions
Length x width x height: 2,400 x 2,355 x 2,860 mm
Total weight: 5,500 kg
Equipment
- Linear guideways with ball screws for high rapid traverse speeds on all axes
- Telescopic guideway covers on all three axes
- Automatic lubrication
- Portable electronic handwheel with enable and emergency stop buttons
- RJ45 connection and 230 V power outlet
- Machine light in work area
- Cleaning gun
- Ball screws and linear guides by THK
- Chip flushing system
- Headstock cooling (machining area)
- Electrical cabinet
- Arm type tool changer
- SW24
- CE
*More options available
Mažas skelbimas
Sankt Egidien
894 km
Stulpinis gręžtuvas
OptimumDH45V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, For information on delivery times and up-to-date prices, please inquire directly.
Dimensions and weights:
Column diameter: 150 mm
Length (product): approx. 880 mm
Width/Depth (product): approx. 595 mm
Height (product): approx. 2445 mm
Weight (net): approx. 550 kg
Drilling performance:
Drilling capacity steel (S235JR): 40 mm
Continuous drilling capacity steel (S235JR): 35 mm
Thread cutting in steel (S235JR): M30
Drill table:
Drill table working area length: 530 mm
Drill table working area width: 530 mm
Drill table T-slot size: 18 mm
Number of drill table T-slots: 3
Drill table T-slot spacing: 125 mm
Drill table rotation: 360°
Drill table tilt: ± 90°
Max. load capacity drill table: 250 kg
Max. spindle-to-table distance: 740 mm
Min. spindle-to-table distance: 130 mm
Speed range:
Speed range: 30 – 2430 rpm
Number of speed ranges: 4 steps
Speed control: electronic
Electrical data:
Drive motor power: 2.2 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Machine base:
Max. spindle-to-base distance: 1210 mm
Kfjdpfx Abjq T Ry Usksa
Machine base working area length: 435 mm
Machine base working area width: 445 mm
Machine base T-slot size: 18 mm
Number of machine base T-slots: 2
Machine base T-slot spacing: 150 mm
Spindle:
Quill stroke: 170 mm
Spindle taper: MT 4
Throat: 350 mm
Quill feed: automatic
Quill feed rate: 0.1 – 0.2 mm/rev
Number of quill feed steps: 3
Motor(s):
Coolant pump drive motor power: 100 W
Mažas skelbimas
Bitburg
1 305 km
Stulpelio gręžimo staklės
OptimumOptidrill D 26 Pro - Set
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, OPTIdrill D 26PRO – Column Drilling Machine
Bench and column drilling machine with V-belt drive
User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop actuator
400 Volt models with forward/reverse operation
Drilling depth stop
Precisely machined drill table with diagonally arranged T-slots
Kedpedqzbnjfx Abkofa
Height adjustment of the drill table via rack and pinion
Drill table inclinable ± 45° and rotatable 360°
V-belt guard with safety switch
One-piece aluminum die-cast quill lever with soft-grip handles
Industrial motor
Precision spindle bearing
Machine operation including safety electronics in 24V DC
Guaranteed concentricity accuracy
Mažas skelbimas
Hallstadt
1 054 km
Lygiagrindė šlifavimo staklės
OptimumGT40
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen.
• Electromagnetic chuck for securing the workpiece, featuring an automatic demagnetization function
• High-quality spindle with precision tapered roller bearings
• Hardened and ground table guideways
• Turcite-B coated counter-guides for high wear resistance and low friction
• Grinding spindle equipped with high-precision bearings
• Grinding wheel can be dressed directly on the machine with an integrated dressing device
• Digital position display
• Machine base made of rigid, torsion-resistant cast iron for maximum stiffness and stability
• Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat guides
• Precision recirculating ball screws
Ksdpsxyhvkofx Abksfa
• Central lubrication for guideways and feed screw
• All flat guideways are finely scraped, ensuring the highest precision for all manual operations
• 24 V DC safety electrical system
• Large, decoupled handwheels on all three axes
• Hydraulic lines conforming to DIN EN 853
• Grinding accuracy: 0.005 mm
• Corundum grinding wheel, grit 46, suitable for all common steels
• Swiveling control panel greatly simplifies operation
• Separate hydraulic unit with heat exchanger prevents vibrations and thermal stress
• Dual-channel safety electronics
• Grinding table splash guard
• EMC filter class
• Equipped with IE3 motor – significantly lower energy consumption resulting in substantial cost savings
Dimensions and Weights
Length approx. 3,600 mm
Width/depth approx. 2,400 mm
Height approx. 1,900 mm
Weight approx. 3,600 kg
Electrical Data
Total connected load: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Surface Grinding Table
Clamping surface length: 400 mm
Clamping surface width: 800 mm
Grinding Wheel(s)
Outside diameter: 350 mm
Width: 40 mm
Bore: 127 mm
Peripheral speed: 27 m/s
Spindle
Speed: 1,450 rpm
Rotational accuracy: 0.005 mm
X-Axis
Feed rate: 5 – 25 m/min
Equipment
• Digital position display
• Coolant system
• Balancing arbor
• Grinding wheel grit 46
• Diamond dresser
• Operating tools
• Manual oil pump
• LED work light
• Electromagnetic chuck
• Demagnetization function
Standard Equipment
• Electromagnetic chuck
• Splash guard table enclosure
• Demagnetization unit
• Parallel dressing device ✔
• Coolant system 125 W
• LED work lamp
• Leveling feet ✔
Mažas skelbimas
Sankt Egidien
894 km
Juostinis pjūklas
OptimumOPTIsaw SD 500 AV
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, New machine. Please enquire for the current daily price and delivery time.
Dimensions and Weights:
Length (product): approx. 2,129 mm
Width/Depth (product): approx. 1,046 mm
Height (product): approx. 1,687 mm
Net weight: approx. 645 kg
Electrical Data:
Drive motor power: 3 kW
Connection voltage: 400 V
Line frequency: 50 Hz
Hydraulic pump motor power: 1.4 kW
Coolant pump motor power: 100 W
Total connected load: 3.8 kW
Machine Data:
Kedpfx Asrah S Hjbkjfa
Saw band speed(s): 20 – 80 m/min
Saw band length: 3,770 mm
Saw band width: 34 mm
Saw band thickness: 1.1 mm
Cutting angle: -45 – 60°
Manual operation: Hydraulic via push button
Semi-automatic operation: Automatic
Cutting Capacity:
Cutting range 0° round (solid material): 355 mm
Cutting range 0° square (solid material): 300 mm
Cutting range 0° rectangular upright (solid material): 300 x 490 mm
Cutting range -45° round (solid material): 290 mm
Cutting range -45° square (solid material): 250 mm
Cutting range -45° rectangular upright (solid material): 250 x 250 mm
Cutting range +45° round (solid material): 350 mm
Cutting range +45° square (solid material): 290 mm
Cutting range +45° rectangular upright (solid material): 290 x 340 mm
Cutting range +60° round (solid material): 230 mm
Cutting range +60° square (solid material): 180 mm
Cutting range +60° rectangular upright (solid material): 180 x 220 mm
Mažas skelbimas
Bitburg
1 305 km
Gręžimo ir frezavimo staklės
OptimumMB 4 PV
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Heavy, robust cast construction
High running smoothness thanks to ground, oil-bath lubricated gearbox gears
Right-/left-hand rotation
Automatic quill feed with manual fine feed
Motorized positioning of the Z-axis
Motorized table feed on the X-axis
Coolant system
Machine lamp
Gear head ± 60° swiveling
Adjustable gibs
Massive, hand-scraped dovetail column guide for maximum stability and precision
Height-adjustable, large protective screen with microswitch
Drilling depth stop
Digital position display DRO 5
Drilling / tapping function
Massive, large-dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs
Heavy-duty cast machine base with chip tray
Single-stage quality industrial electric motor
Wide speed range from 60 - 2,760 rpm via two infinitely variable speed settings
Dimensions and weight
Length approx. 1600 mm
Width/depth approx. 930 mm
Height approx. 2110 mm
Weight approx. 495 kg
Drilling/milling performance
Max. facing head diameter: 63 mm
Max. end mill diameter: 26 mm
Drilling capacity steel (S235JR): 24 mm
Continuous drilling capacity steel (S235JR): 20 mm
Electrical data
Connection voltage: 230 V
Mains frequency: 50 Hz
Electrical connection
Total connected load: 1.5 kW
Milling table horizontal
Length: 800 mm
Width: 240 mm
Distance vertical spindle – milling table max.: 420 mm
T-slot size: 14 mm
Number of T-slots: 3
T-slot spacing: 80 mm
Standards and certifications
Standard: DIN EN 55011
EMC class: C2
Travel
Manual X-axis: 560 mm
Manual Y-axis: 195 mm
Manual Z-axis: 350 mm
Automatic X-axis: 480 mm
Vertical spindle
Overhang: 258 mm
Spindle taper: MT 4
Speed range: 60 – 2,760 rpm
Number of speed ranges: 2
Speed control: electronic
Drawbar: M 16
Swivel range milling head Z-X plane: ± 45 °
Quill diameter: 75 mm
Quill stroke: 120 mm
Location: Ex stock 54634 Bitburg
Kfsdpfjg U Uv Uox Abkoa
- immediately available -
Mažas skelbimas
Sankt Egidien
894 km
Centro tekinimo staklės
OptimumTM 4010
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, For delivery times and current daily prices, please contact us directly.
Dimensions and Weights:
Length (product): approx. 1935 mm
Kjdpfx Absq T R Dmskjfa
Width/Depth (product): approx. 780 mm
Height (product): approx. 1740 mm
Weight (net): approx. 765 kg
Working Ranges:
Centre height: 200 mm
Centre distance: 1000 mm
Swing diameter over bed: 400 mm
Swing diameter over cross slide: 250 mm
Speed Range:
Number of speed ranges: 8
Speed range: 70 – 2000 rpm
Electrical Data:
Drive motor power: 2.2 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Coolant System:
Coolant pump power: 100 W
Spindle:
Toolpost: SWH 3-E
Spindle mount: Camlock DIN ISO 702-2 No. 5
Spindle bore/bar capacity diameter: 53 mm
Spindle taper: MT 6
Tailstock:
Tailstock taper: MT 4
Tailstock quill stroke: 110 mm
Thread Cutting:
Metric pitch: 0.4 – 7 mm/rev
Number of metric pitches: 32
Imperial pitch: 56 – 4 TPI
Number of imperial pitches: 31
Travels:
Top slide travel: 98 mm
Cross slide travel: 185 mm
Bed slide travel: 850 mm
Feed:
Longitudinal feed range: 0.014 – 0.38 mm/rev
Number of longitudinal feeds: 26
Cross feed range: 0.052 – 1.392 mm/rev
Number of cross feeds: 32
Tool Clamping:
Toolholder size: 16 mm
Electrical Connection:
Total connected load: 3.0 kW
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Bitburg
1 305 km
Centro tekinimo staklės
OptimumD 1340 GDE
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Optimum D 1340 GDE, year 2001, in excellent condition – previously used as a training machine –
Swing over bed: 330 mm
Swing over cross slide: 160 mm
Turning length: 800 mm
Total power requirement: 2 kW
Machine weight approx.: 400 kg
Space requirement approx.: 2000 x 1000 x 1600 mm
Bar capacity: 38 mm
Spindle speed range: 70 – 2000 rpm
Kfsdjvutyhepfx Abkja
Spindle nose: —
Feed range: 0.025 – 2.553 mm/rev
Threading capability:
- Metric: 0.25 – 11 mm
- Imperial: 4 – 112 TPI
Tailstock: MT 3
Control: conventional
3-jaw chuck included.
Location: ex stock 54634 Bitburg
- available at short notice -
Mažas skelbimas
Sankt Egidien
894 km
Centro tekinimo staklės
OptimumOPTIturn TH 4010
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, For delivery times and up-to-date daily prices, please contact us directly.
Condition: New machine
Centre height: 200 mm
Centre distance: 1,000 mm
Kedpfx Ajq Ui Tdobksfa
Spindle speed: 70 – 2,000 rpm (8 steps)
Standard equipment includes:
- 3-axis digital readout DPA 21
- Machine base
- 200 mm three-jaw chuck
- LED machine lamp
- Reducing sleeve MK 4/MK 6
- Fixed centre MK 4
- Fixed steady rest
- Travelling steady rest
- QCTP base body E
- QCTP tool holder ED
- Electrically interlocked chuck guard
- Oil filling
- Operating tools
- Operating manual
Mažas skelbimas
Bitburg
1 305 km
Horizontalus juostinis pjūklas
OptimumOptisaw SD 200V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Optimum Gear-Driven Metal Band Saw
OPTIsaw SD 200V
For demanding sawing tasks
Article number: 3300205
DESCRIPTION
- Quiet operation
- Sturdy cast iron construction
- Saw bow lowering infinitely adjustable via hydraulic cylinder with throttle valve
- Microswitch for automatic end-of-cut shut-off
- Clearly readable scale for angle adjustment
- Supplied as standard with a high-quality bi-metal saw blade
- Saw blade tension adjustable from the front via handwheel
- Ball-bearing guided saw blade
- Robust machine base with large wheels and ergonomic transport handle for easy relocation
- Adjustable material stop for series production
- Safety switch for saw blade cover
- Fully equipped, allowing the operator to start productive work immediately after commissioning
TECHNICAL DATA
Dimensions and Weights
Length (product) approx.: 1382 mm
Width without material stop approx.: 434 mm
Width/depth (product) approx.: 533 mm
Kfjdpfev Sg T Njx Abksa
Width with material stop approx.: 533 mm
Height (product) approx.: 1200 mm
Height lower end position approx.: 790 mm
Height upper end position approx.: 1200 mm
Weight (net) approx.: 130 kg
Work table height: 530 mm
Electrical Data
Drive motor power: 0.75 kW
Supply voltage: 230 V
Mains frequency: 50 Hz
Coolant pump motor power: 100 W
Machine Data
Saw blade speed(s): 26 – 80 m/min
Saw blade length: 2360 mm
Saw blade width: 19 mm
Saw blade thickness: 0.9 mm
Cutting angle: 0 – 45°
Feed: infinitely adjustable
Raising of saw bow: manual
Cutting Ranges
Cutting capacity 0° round (solid material): 180 mm
Cutting capacity 0° square (solid material): 180 mm
Cutting capacity 0° rectangular upright (solid material): 180 x 240 / 50 x 300 mm
Cutting capacity +45° round (solid material): 110 mm
Cutting capacity +45° square (solid material): 150 mm
Cutting capacity +45° rectangular upright (solid material): 110 x 170 mm
SCOPE OF DELIVERY
- Material stop
- Bi-metal saw blade
- Machine base
Mažas skelbimas
Sankt Egidien
894 km
Juostinis pjūklas
OptimumS 350 DG
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, New machine. Please request the current daily price and delivery time.
Dimensions and Weights:
Length (product): approx. 1750 mm
Width/Depth (product): approx. 1075 mm
Height (product): approx. 1420 mm
Weight (net): approx. 550 kg
Max. width/depth (product): approx. 1415 mm
Max. height (product): approx. 2000 mm
Electrical Data:
Drive motor power: 2.2 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Coolant pump motor power: 0.05 kW
Machine Data:
Saw band speed(s): 36 / 72 m/min
Saw band length: 2925 mm
Saw band width: 27 mm
Saw band thickness: 0.9 mm
Cutting angle: -45 to +60°
Feed: infinitely variable
Lifting of saw frame: manual
Cutting Ranges:
Cutting range 0° round (solid): 270 mm
Cutting range 0° square (solid): 230 mm
Cutting range 0° flat rectangular (solid): 230 x 350 mm
Kedorah R Tjpfx Abksfa
Cutting range -45° round (solid): 230 mm
Cutting range -45° square (solid): 170 mm
Cutting range -45° flat rectangular (solid): 140 x 200 mm
Cutting range +45° round (solid): 230 mm
Cutting range +45° square (solid): 200 mm
Cutting range +45° flat rectangular (solid): 210 x 220 mm
Cutting range +60° round (solid): 140 mm
Cutting range +60° square (solid): 140 mm
Cutting range +60° flat rectangular (solid): 140 x 220 mm
Palengviname jums paiešką: "optimum b 33"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.

















































































































































