Namas Ryšys Langelį Geyer pirkti naudotą (1 217)

Sąlyga: naudotas, bakelio talpa: 10 875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some cases, the top cover flanges have been internally welded shut with stainless steel plates by the previous operator (in some of these plates, an opening has also been cut; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/Cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Knjdpfxexqa Nws Afpsd Agitator: Anchor agitator Base design: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 2,200 mm Previous application: Adhesive industry TANK Max. operating temperature (tank) / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum (double jacket / pipe area / bar): 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway/dome: on top cover Outlet: available Outlet (alternative input): 100 mm Note: slight residues, manway cover missing MATERIAL SPECIFICATION Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator arrangement: centrally on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Sąlyga: naudotas, bakelio talpa: 1 500 l, GENERAL Equipment: Ventilation, disc valve Design: upright Notes: Adjustable cap screws for the feet are missing; hand lever for the disc valve is missing; manhole cover not suitable for an operating pressure of 2 bar (the tank was last operated, probably as a non-pressurized vessel by the previous owner and the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: equipped Insulation: present Max. permissible operating temperature: 20°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Previous application: dairy TANK Max. tank operating temperature / °C: 120°C Bottom: flat bottom with slope Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Kodpfxexqa Its Afpend AGITATOR Agitator arrangement: eccentric in the top head

Sąlyga: naudotas, Gamybos metai: 2015, bakelio talpa: 400 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Year of manufacture: 2015 Remarks: Discharge valve incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Speed: 377 rpm External diameter: 910 mm Internal diameter: 770 mm Total height: 1,830 mm Heating/Cooling: available Knsdsxqa Hvepfx Afpod Insulation: available Power: 0.55 kW Max. permissible operating temperature: 165 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: magnetic stirrer Support type: feet Location: Bremen Cylinder temperature control: thermoplate Nameplate: Vacuum: 1.0 bar Volume: 400 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Last intended use: pharmaceuticals TANK Max. operating temperature tank / °C: 165 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Discharge (alternative input): available mm MATERIAL PROPERTIES Outer surface: ground Inner surface: ground Feet material: stainless steel AGITATOR Agitator manufacturer: Millipore Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Sąlyga: naudotas, bakelio talpa: 568 l, GENERAL INFORMATION Equipment: Control cabinet (no guarantee) Design: upright Outer diameter: 900 mm Inner diameter: 810 mm Total height: 1,830 mm Heating/cooling: available Max. permissible operating temperature: 134°C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Top cover: removable / hinged top cover Agitator: agitator flange Mounting style: mobile on castors Location: Bremen Cylinder temperature control: double jacket Kodpfjxqa Dhsx Afpend Nameplate: Vacuum: 1.0 bar Volume: 568 litres Double jacket volume: 108.0 litres Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 850 mm Previous application: pharmaceuticals TANK Max. operating temperature (tank) / °C: 134°C Number of feet: 4 pcs HEATING / COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Discharge (alternative entry): 23 mm Note: scratches inside MATERIAL SPECIFICATION External surface: polished Internal surface: ground Material of temperature control system: V2A 1.4301 (AISI 304) Material of feet: stainless steel AGITATOR Agitator arrangement: eccentric in the top cover

Sąlyga: naudotas, bakelio talpa: 120 l, BENDRA INFORMACIJA Konstrukcijos tipas: vertikalus Pastabos: važiuojamasis rėmas iš V2A nerūdijančio plieno; dangčio spaustuko žiedas trūksta Išorinis skersmuo: 500 mm Vidinis skersmuo: 400 mm Knsdjxqay Nepfx Afped Bendras aukštis: 1 200 mm Šildymas / aušinimas: yra Didž. leidžiama darbinė temperatūra: 15 °C Didž. leidžiamas darbinis viršslėgis: 1.0 bar Didž. viršslėgis: 1.5 bar Viršutinis dangtis: nuimamas / atverčiamas viršus Maišytuvas: magnetinis maišytuvas Pastatymo tipas: mobilus rėmas Vieta: Bremen Cilindro temperavimas: dvigubas apvalkalas Tipinė lentelė: Tūris: 120 litrų Dvigubo apvalkalo tūris: 16,0 litrų Dvigubo apvalkalo medžiaga: V2A 1.4301 (AISI304) Gaminio sąlyčio medžiaga: V4A 1.4435 (AISI316) Būklė: naudotas Cilindro aukštis: 750 mm Paskutinis naudojimas: farmacija TALPYKLA Didž. darbinė temperatūra talpykloje / °C: 130 °C ĮRANGA Išleidimo anga (alternatyvus įrašas): 35 mm MEDŽIAGOS CHARAKTERISTIKOS Išorinis paviršius: šlifuotas Vidinis paviršius: poliruotas MAIŠYTUVO DALYS Maišytuvo padėtis: apatinis dangtis Maišytuvo įranga: variklio / pavarų agregatas magnetiniam maišytuvui nėra

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Manhole cover incomplete (e.g. sight glass missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be checked) Total height: 4,350 mm Heating/cooling: present Power: 11 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Stand type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 liters Double jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,380 mm Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom tempering: Half-pipe coil FEATURES Manhole / Dome: in the top head (DN 500) Outlet (alternative entry): 130 mm MATERIAL SPECIFICATION Material tempering system: AISI 304 (V2A) 1.4306 AGITATOR Kedpfx Afjxqayiopsnd Agitator manufacturer: Ekato Voltage: 400 Volt Agitator arrangement: central in top head Agitator features: Agitator drive was controlled by external frequency converter (no longer available) with the previous owner; various technical documents for the agitator available TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.5 mm Top head wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 2 420 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Manway DN 350/450 (manway cover incomplete); support ring, Fe; some flanges Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,400 mm Heating/Cooling: Available Power: 2.2 kW Max. permitted operating temperature: 200°C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: Removable / hinged top head RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Double jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum for double jacket / tube space / bar: 1.0 bar Bottom head tempering: Half-pipe coil EQUIPMENT Manway / dome: In the top head Outlet: Available MATERIAL SPECIFICATION Tempering system material: AISI 304 (V2A) 1.4306 AGITATOR Kjdexqaycopfx Afpsnd Agitator manufacturer: Ekato Voltage: 400 Volt Baffles: Agitator arrangement: Centered in the top head Agitator features: Paddle & propeller agitator elements mounted on the shaft; speed was controlled by previous owner via external speed controller (no longer available); various technical documents available for the agitator TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.1 mm Top head wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Design: suspended Remarks: Support ring made of Fe; manway cover incomplete; for one vessel, the heating connections have been mostly cut off and are supplied loose; 1 vessel has a total height approx. 100 mm shorter due to different motor/gearbox units Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,750 mm Heating/cooling: available Power: 3 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Knodpexqax Ejfx Afpsd Max. overpressure: 3.2 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Cylinder temperature control: half-pipe coil Type plate: Vacuum: 1.0 bar Volume: 3,690 liters Double jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous application: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: half-pipe coil FITTINGS Manway / dome: in top head (DN 500) Outlet (alternative input): 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Agitator manufacturer: Ekato Voltage: 400 volt Agitator arrangement: centrally in top head Agitator configuration: Slight differences in agitator design (Interprop beam agitator installed on the shaft for media up to approx. 3,000 mPas; for one of the vessels, there is additionally a stabilizing propeller installed on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, the speed range is 25 - 126 rpm); some technical documentation for the agitators available TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 6.1 mm Top wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Sight glasses in manhole covers missing; support ring made of Fe; flanges partially made of Fe Speed: 30-184 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: Available Power: 6.8 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Knodpfx Afexqaxxjped Double-jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product wetted material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom tempering: Half-pipe coil EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet (alternative input): 130 mm MATERIAL QUALITY Material of tempering system: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 volts Interference suppressor: Agitator arrangement: Central in upper head Agitator features: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator mounted on shaft; drive adjustable via handwheel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Upper head wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Equipment: Lifting lugs for crane Design: Suspended Remarks: Further technical documentation available; sight glass on manhole cover missing; support ring made of Fe; some flanges made of Fe Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 4,250 mm Heating/Cooling: available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base design: Ring Location: Bremen Technical documentation: Drawing, inspection certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 litres Double jacket volume: 202.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,377 mm Previous application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole / dome: in the top head (DN 500) MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 volts Agitator arrangement: centrally in the top head Kedpfx Afexqaxropond Agitator features: Speed adjustable via handwheel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Top wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 2 500 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 4 mounting feet made of V2A; manhole cover fixing bolts incomplete; a previous connection in the top head was welded shut by the former operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Kedpfsxqaw Iex Afpend Agitator: Blade agitator Agitator flange: agitator flange Support type: Mounting feet Location: Bremen Cylinder jacket tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 litres Double shell volume: 35.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,500 mm Last intended use: Chemical TANK Max. operating temperature tank / °C: 190 °C HEATING / COOLING JACKET Lower head tempering: half-pipe coil EQUIPMENT Manhole / inspection port: in upper head (DN 500) Outlet: Flange DN50 Note: minor residues, motor/gearbox missing MATERIAL SPECIFICATION Tempering system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: Ekato Baffles: Agitator arrangement: eccentric in upper head AGITATOR 2 Agitator arrangement: lateral on the cylinder TECHNICAL DATA / DIMENSIONS Bottoms wall thickness: 4.6 mm

Sąlyga: naudotas, bakelio talpa: 5 000 l, GENERAL INFORMATION Ksdpfx Aoxqawusfpjnd Equipment: Ball valve Design: Suspended Remarks: Top cover made of V2A (1.4301); 4 legs made of Fe; minor internal material wear inside the tank Internal diameter: 1,880 mm Overall height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: removable / hinged top cover Agitator: Paddle agitator Support type: Legs Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: Chemicals HEATING / COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Access port: On top cover (Ø 450) Outlet: DN40 DIN 11851 Note: minor residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR Agitator manufacturer: Fluid Agitator arrangement: Centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Top cover wall thickness: 4.5 mm

Sąlyga: naudotas, Gamybos metai: 2016, bakelio talpa: 6 000 l, GENERAL Equipment: Crane lugs Design: Vertical Year of manufacture: 2016 Remarks: Manway DN 600; outlet with bolted valve; no information regarding the inspection of the double jacket in the inspection report (on a copy of drawing 1160246-1A or 1B, the signed stamp 'Tested according to AD 2000 regulations by TÜV Süd' is present); some blind plugs may be available Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,630 mm Heating/Cooling: available Ksdpfx Asxqawnofpjnd Insulation: available Max. admissible operating temperature: 135 °C Max. admissible operating overpressure: 6.0 bar Maximum overpressure: 3.0 bar Agitator: Magnetic stirrer Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV documents, structural analysis, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,400 mm Last field of application: Pharmaceuticals VESSEL Max. operating temperature vessel / °C: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation material: Armaflex Insulation jacket material: Stainless steel Insulation thickness / mm: 50 mm EQUIPMENT Manway / dome: in cylinder Outlet (alternative entry): 187 mm MATERIAL COMPOSITION Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel STIRRER Stirrer manufacturer: Metenova AB Voltage: 400 Volts Stirrer placement: Bottom TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 5.8 mm

Sąlyga: naudotas, bakelio talpa: 2 420 l, GENERAL Equipment: Lifting lugs / crane eyes Design: Suspended Remarks: Manhole DN 350/450 (sight glass in manhole cover missing); support ring made of Fe; some flanges made of Fe Speed: 235 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (conformity with applicable ATEX regulations under local conditions must be verified) Total height: 3,550 mm Heating/cooling: available Power: 4 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: removable / swing-open top head Agitator: inclined-blade agitator Type of base: ring Knodpfx Afsxqav Rspjd Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Double jacket volume: 100.0 liters Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: pharmaceutical chemicals TANK Max. tank operating temperature /°C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head Outlet (alternative entry): 130 mm MATERIAL SPECIFICATION Material (temperature control system): AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 Volt Electromagnetic disturbance suppressor: Agitator mounting: centrally in top head Agitator equipment: Agitator drive at previous operator was controlled via an external frequency inverter (no longer available), presumably from 30 - 150 rpm TECHNICAL DATA / DIMENSIONS Top head wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 1 358 l, GENERAL INFORMATION Kedpfx Ajxqavwsfpsnd Design: Vertical Remarks: 3-legged base frame made of stainless steel, components include mild steel; minor dents on the insulation jacket; manway cover fixing knob missing Outer diameter: 1,420 mm Inner diameter: 1,280 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. allowable operating temperature: 143 °C Max. allowable operating overpressure: 3.0 bar Max. overpressure: 0.5 bar Agitator: Agitator flange Support type: Frame Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,358 litres Double jacket volume: 40.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: food TANK Max. operating temperature tank / °C: 100 °C HEATING/COOLING JACKET Bottom tempering: half-pipe coil INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / Dome: top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Agitator arrangement: off-centre in top head

Sąlyga: naudotas, bakelio talpa: 259 l, GENERAL Equipment: Ball valve Design: upright/vertical Remarks: Manhole diameter 200 mm; minor dents on the thermal jacket Speed: 71 - 640 rpm Outer diameter: 830 mm Inner diameter: 690 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Insulation: available Power: 0.34 kW Max. permissible operating temperature: 142°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: propeller Support type: mobile on castors Kjdpsxqavkefx Afpend Location: Bremen Jacketed cylinder: double jacket Nameplate: Vacuum: 1.0 bar Volume: 259 liters Double jacket volume: 18.0 liters Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 470 mm Last application: pharmaceutical TANK Max. tank temperature / °C: 142°C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom heating/cooling: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: handhole Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in the top cover Agitator features: speed adjustable via handwheel

Sąlyga: naudotas, bakelio talpa: 11 424 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Double jacket with sprinkle ring – suitable only for non-pressurized temperature control; dents in the double jacket; double jacket cladding partially detached in the area of the top head (see photos) Speed: 55 / 112 rpm Outer diameter: 2,140 mm Inner diameter: 2,000 mm Total height: 4,500 mm Heating/Cooling: available Power: 1.5 / 2.2 kW Max. overpressure: 3.2 bar Agitator type: Propeller Mounting type: Height-adjustable feet Location: Bremen Technical documentation: Drawing Cylinder temperature control: Double jacket Knodpfx Ajxqau Hefpsd Nameplate: Vacuum: 1.0 bar Volume: 11,424 liters Cylinder wall thickness: 6 mm Product-wetted material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Last intended use: Dairy TANK Max. operating temperature tank / °C: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: Double jacket FITTINGS Manhole/Dome: in top head (Ø 450) Outlet (alternative entry): 48 mm Note: Light residues, outlet end cutoff MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Voltage: 380 Volt Agitator arrangement: Side-mounted on cylinder TECHNICAL DATA / DIMENSIONS End plate thickness: 6 mm

Sąlyga: naudotas, bakelio talpa: 1 100 l, GENERAL Equipment: crane lugs Design: vertical Remarks: 3 loose load cells (functional guarantee not provided) are included in the scope of delivery Speed: 394 rpm Ksdpfx Afjxqauyspjnd Outer diameter: 1,154 mm Inner diameter: 988 mm Total height: 2,600 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permitted operating temperature: 130 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 1.99 bar Agitator: magnetic stirrer Base type: feet Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: double jacket Rating plate: Vacuum: 1.0 bar Volume: 1,100 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 875 mm Last application: pharmaceuticals TANK Max. operating temperature of tank / °C: 130 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation shell: hermetically welded Insulation shell material: stainless steel EQUIPMENT Manhole / dome: in top (DN 500) Outlet (alternative entry): 38 mm Note: metallic discoloration inside MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator manufacturer: HANAG Steriltechnik AG Voltage: 220/380 Volt Agitator type: bottom entry TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Top wall thickness: 4.5 mm

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 1 700 l, GENERAL Features: Spray head Design: vertical Year of manufacture: 2007 Outer diameter: 1,400 mm Inner diameter: 1,170 mm Total height: 3,250 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 4.0 bar Top cover: removable/top-hinged cover Agitator: blade agitator Agitator shaft mount: agitator flange Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: double jacket Type plate: Vacuum: 1.0 bar Volume: 1,700 litres Double jacket volume: 230.0 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,170 mm Previous application: pharmaceutical industry TANK Max. operating temperature / °C: 100 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole/dome: in top cover (DN 500) MATERIAL CHARACTERISTICS External surface: high-gloss Temperature control material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator positioning: eccentric in top cover Agitator features: motor/gear unit no longer available Knedoxqauaspfx Afpsd AGITATOR 2 Agitator positioning: side-mounted on cylinder

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 29 000 l, GENERAL Design: vertical Year of manufacture: 2007 Notes: Manhole diameter, top head: approx. 700 mm; Manhole diameter, shell: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Internal diameter: 2,980 mm Total height: 6,800 mm Heating/cooling: present Power: 75 kW Max. overpressure: 0.6 bar Agitator: paddle agitator Support type: feet Location: outdoor storage Technical documentation: drawing, CE marking, and Declaration of Conformity Shell temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Shell wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Knedpfx Afjxqat Neped Previous application: adhesive production VESSEL Max. operating temperature, vessel/°C: 100°C Specific gravity of medium (t/m³): 1.3 (t/m³) Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole/dome: in shell, in top head Outlet (alternative entry): DN 125 mm AGITATOR Agitator manufacturer: PRG Voltage: 400 volts Bottom bearing: Agitator arrangement: centrally mounted on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top head wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 435 l, GENERAL Equipment: Spray head Design: upright Notes: 1 dent in the inner cylinder (overpressure in double jacket; see photos) Outer diameter: 940 mm Inner diameter: 770 mm Total height: 1,650 mm Heating/cooling: available Insulation: available Max. permitted operating temperature: 143 °C Max. permitted operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top cover: removable/openable top cover Agitator: agitator flange Base type: mobile on castors Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 435 litres Double jacket volume: 42.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 670 mm Previous use: pharmaceuticals CONTAINER Max. operating temperature of vessel / °C: 143 °C Number of legs: 4 units HEATING/COOLING JACKET Bottom tempering: double jacket INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Outlet (alternative entry): 37 mm Knodexqatpspfx Afpod MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) Leg material: stainless steel AGITATOR Agitator arrangement: eccentric in top cover

Sąlyga: naudotas, bakelio talpa: 5 600 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: At the outlet, one reduction flange to diameter 65 mm; one dip tube inside the tank; one pallet with accessories (foot pedestals, fittings, etc.) included in the scope of delivery; this accessory was not considered in the stated overall height. External diameter: 2,050 mm Internal diameter: 1,880 mm Kjdpfexqatisx Afpsnd Total height: 3,000 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Agitator: agitator flange Support type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,600 liters Double jacket volume: 250.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,500 mm Previous use: cosmetics TANK Max. operating temperature tank / °C: 150 °C Number of feet: 4 units HEATING / COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top head (DN 500) Outlet (alternative entry): 100 mm MATERIAL SPECIFICATIONS Feet material: stainless steel AGITATOR Agitator arrangement: lateral on cylinder

Sąlyga: naudotas, bakelio talpa: 1 000 l, Location: Bremen Condition: used Capacity: 1,000 liters Vacuum: 1.0 bar Max. overpressure: 4.0 bar Tank Max. operating temperature, tank: 150°C Design: vertical Tank Support type: feet Number of feet: 3 pcs Heating/cooling: present Double jacket volume: 72.0 liters Max. permissible operating overpressure: 6.0 bar Heating/cooling jacket Knsdpfxoxqar Se Afpsd Max. permissible operating vacuum, double jacket / pipe chamber: 1.0 bar Max. permissible operating temperature: 150°C Cylinder tempering: double jacket Heating/cooling jacket Bottom tempering: double jacket Insulation: present Insulation Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Inner diameter: 1,100 mm Outer diameter: 1,300 mm Cylindrical height: 1,000 mm Total height: 2,300 mm Technical data / dimensions Bottom wall thickness: 6.6 mm Cylinder wall thickness: 10 mm Technical data / dimensions Top wall thickness: 6.3 mm Technical documentation: drawings, TÜV papers, various documents Equipment Manhole / dome: on top head (DN 400) Nameplate: Equipment: spray head Equipment Outlet: present Outlet (alternative specification): 50 mm Previous use: pharmaceuticals Product contact material: V4A 1.4401/04 (AISI316) Material specifications Tempering system material: V4A 1.4571 (AISI316) Feet material: stainless steel Agitator Agitator manufacturer: Aprotec Power: 1.1 kW Agitator: magnetic agitator Agitator Voltage: 220/380 volts Agitator arrangement: bottom-mounted Agitator equipment: various technical documents for the agitator available

Sąlyga: naudotas, Gamybos metai: 2008, bakelio talpa: 3 158 l, GENERAL Equipment: Level indicator (without guarantee), spray head, lifting lugs Design: vertical Year of manufacture: 2008 Remarks: Tank is unused, was only filled with demineralised water for pressure testing External diameter: 1,580 mm Kodpexqaqzjfx Afpsnd Internal diameter: 1,400 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 150°C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Agitator: magnetic stirrer Base type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, various documents, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,158 litres Double-jacket volume: 90.0 litres Cylinder wall thickness: 5.6 mm Double-jacket material: V4A 1.4404 (AISI316) Product-contact material: V4A 1.4435 (AISI316) Condition: unused Cylindrical height: 1,680 mm TANK Max. operating temperature tank / °C: 150°C Ends: torispherical heads Number of feet: 4 pcs HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / access hatch: in the top head (DN 500) Outlet: available AGITATOR Agitator mounting: bottom entry TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 7.5 mm Top head wall thickness: 10.5 mm

Sąlyga: naudotas, bakelio talpa: 530 l, GENERAL Equipment: Spray head Design: vertical Notes: Original drawing available; tank was modified in 1997 (e.g. modification of feet and/or connections); verification of subsequent pressure test available; modification drawing only available as fax; 1 dip pipe inside the tank Speed: 670 rpm External diameter: 900 mm Internal diameter: 800 mm Knodpfx Afexqaqusped Total height: 2,250 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. admissible operating temperature: 143 °C Max. admissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Agitator: propeller Base type: height-adjustable feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 530 litres Double jacket volume: 70.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 900 mm Previous application: pharmaceutical TANK Max. operating temperature (tank): 143 °C Number of feet: 4 pieces HEATING/COOLING JACKET Base temperature control: double jacket INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the upper head (DN 400) Outlet: DN80 DIN 11851 Note: minor residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Voltage: 230/400 V Agitator arrangement: eccentric in the upper head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm