Multipli pirkti naudotą (793)

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 105554, We are offering this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW For any questions or if you require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). Two 4-axis machining heads for simultaneous operation (20kW). Automatic loading and unloading tables. Optionally, a comprehensive tool package is available for purchase (tool holders, angle heads, profile cutter heads). The machine is currently in continuous use. The machine was purchased in 2024 after thorough overhaul. Since then it has worked 15 months on a single shift basis. Technical data: Working range: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by multiple repositioning of the workpiece in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 1: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg Kjdjyu Sn Uspfx Agfsdi - max total tool weight: 130 kg - tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 2: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 External magazine: - magazine type: linear - magazine capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Loading table: transverse, automatic Unloading table: transverse, automatic CNC control: PLC control: Siemens S7 Mobile control panel Controller computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics - touchscreen display Siemens Sinumerik 840 D Number of axes: 4 The machine is fully operational and currently in continuous production. For an additional fee, a comprehensive package of accessories is available: 8 angle heads, a set of 3 standard holders, a set of 17 new arbors for cutter heads.

Būklė: labai geros būklės (naudotas), Advantages of the GF4: - Wider working range - Clamping jaws made of aluminum - Motor allows cutting pipes made from very hard materials - 30% weight reduction thanks to a newly designed body - Laser cutting line indicator - New ergonomic handle - Swivel cable with quick-connect coupling Kodpfeym Unzjx Agfodi The GF4 machine can be equipped with the AVM automatic rotation module. Technical data: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Min. pipe inner diameter (with 63 mm saw blade) [mm]: 21 - Min. pipe inner diameter (with 68 mm saw blade) [mm]: 16 - Min. pipe inner diameter (with 80 mm saw blade) [mm]: 4 - Integrated electronic speed control: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, Part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes are secured in a self-centering, prismatic vise which prevents deformation. The pipe diameter and, depending on the material, the cutting speed are easily adjusted via user-friendly controls. The cutting device is manually rotated around the pipe, while the electric saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting offers significant time and cost savings: - Perpendicular, flat, burr-free cuts - Pipe ends are prepared for multiple joining techniques without additional finishing - Cold cutting process - No overheating, preventing intergranular corrosion and material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled during the cutting process or separately Optional parts: GF and RA machines can be equipped with an AVM automatic rotation module or an MVM manual rotation module. The AVM module continuously monitors cutting speed depending on torque and set parameters. The MVM module, featuring a ring gear mechanism and a handle, ensures effortless and consistent manual rotation of the machine head.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 223A011235001, garantijos trukmė: 12 mėnesiai, rėmo aukštis: 600 mm, rėmo plotis: 600 mm, Įranga: dokumentacija / vadovas, Frame size: 600 x 600 mm Strap width: 5-9 mm Year of manufacture: 2012 Kdodpfot Uzv Tjx Agfji Machine number: 223A011235001 Condition: Fully reconditioned Our latest project involved the refurbishment of this fully automatic strapping machine, SMB CUBE 600x600c from 2012. At first glance and when looking at the price, you may recognize it as a used machine. But at the very latest, after seeing the list of replaced parts and hours of work invested, it becomes clear: this machine has been meticulously restored to its original delivery condition and is now as good as new—possibly even a bit better. Like-new thanks to CUPASO reconditioning With our fully reconditioned used machines, you acquire refurbished technology at used machine prices. We ensure that we only refurbish equipment that still meets today's requirements. This also applies to the offered SMB CUBE 600x600c. For this reconditioned unit, we also provide our comprehensive after-sales service, including a 12-month warranty and long-term supply of consumables, spare parts, and technical support. Prepared for integration into automated packaging lines Even as a stand-alone unit, this CUBE can be individually configured for your requirements. The machine detects incoming packages or product stacks and straps them once or multiple times according to predefined parameters. Thanks to the pneumatic package press and package height-dependent strap tension, packages of different sizes and shapes can be processed unsorted and individually. With an additional identical machine, also available from us, cross or multiple strapping at high speed is possible. Our promise to you Our full 12-month warranty promise, of course, also applies to this SMB CUBE 600x600c. This means you are on the safe side: if anything should fail within this period, we will replace the defective component and install it at our cost (excluding wear parts and travel). Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Very easy operation • Minimal space requirement • Excellent cost/benefit ratio • Up to 35 packages/minute; depending on return stroke and frame size, without package pressing • Mobile machine (2 fixed/2 swivel castors with brake) • Table height 770 -1000 mm • Powered conveyors • Machine color: Frame RAL 7004 / Support RAL 7016 Special features: • Signal exchange: 2 x counter connectors with tool • Additional light barrier for integration with upstream or downstream equipment • Signal exchange: package not strapped • External button: package not strapped • Package height-dependent strap tension (laser sensor) • Pneumatic package press (600x600) • Twin press bars 600 • Infeed guard on tabletop, infeed side

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The CORMAK DC2200 is an efficient and robust cyclone dust extractor designed for effective air filtration in woodworking shops, furniture manufacturing plants, and metalworking facilities. Featuring a cyclone separator, a powerful centrifugal fan, and a modern filtration system, this unit ensures efficient dust particle separation and sustained high performance over prolonged operation. Main advantages of the CORMAK DC2200: - High extraction capacity – up to 2,800 m³/h – enables efficient removal of dust and shavings even from multiple workstations simultaneously - Cyclone separator – separates larger particles before they reach the filter, prolonging filter service life - Powerful 2.2 kW motor (2200 W / 50 Hz) – guarantees stable and reliable operation in continuous duty - Large 151-litre metal collection bin – ensures convenient and safe collection of waste - 4.8 m² filter surface area – ensures highly effective fine dust filtration - Compact, mobile design – sturdy frame with transport castors for easy movement - Quiet operation – optimised fan minimises noise without sacrificing performance Construction and Technology The CORMAK DC2200 is fitted with a centrifugal fan with a 365 mm impeller generating maximum static pressure of 2,220 Pa. This allows the unit to efficiently extract air over long duct runs and service several workstations. Three suction ports (3 × Ø100 mm) and a main inlet (Ø200 mm) offer flexible system configuration to fit the layout of your production area. The implemented cyclone system effectively separates heavier particles upon entry, allowing only filtered air to reach the collection bin. The cylindrical cartridge filter (Ø370 × 612 mm) maintains consistent airflow even under intensive use. Performance and Ergonomics The DC2200 extractor is engineered for daily use in small and medium-sized enterprises. The 151-litre collection tank (Ø620 × 570 mm) allows for extended operating cycles without frequent emptying. Compact dimensions of 1320 × 900 × 1840 mm and a net weight of 136 kg allow seamless integration into any workspace. Application The CORMAK DC2200 is ideal for use in: Kjdpfoxrdhaex Agfjdi - Woodworking and furniture manufacturing workshops - Sawmills and timber processing facilities - Model makers’ and metalworking shops - Composite and MDF component production Standard Equipment Includes: - Cyclone separator - High-surface-area cylindrical filter - 151-litre metal dust and chip container - Transport wheels (casters) - Suction ports: Ø200 mm and 3 × Ø100 mm Technical Specifications Motor power: 2.2 kW / 50 Hz Capacity (without filter): 3,900 m³/h Maximum static pressure: 2,220 Pa Fan impeller diameter: 365 mm Inlet diameter: 1 × Ø200 mm / 3 × Ø100 mm Tank capacity: 151 L Tank dimensions: Ø620 × 570 mm Filter area: 4.8 m² Filter size: Ø370 × 612 mm Overall dimensions (LxWxH): 1320 × 900 × 1840 mm Weight (net / gross): 136 / 170 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, lazerio bangos ilgis: 1 030 nm, galia: 5 kW (6,80 AG), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 2: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 4: >= 4 mm x mrad, >= 100 µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection kit: yes Ethernet in user area: multiple Number of occupied LLK: 4 Number of intelligent optics: 4 Number of occupied couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no Kdsdpfsr Izwmex Agfsi CE/UKCA declaration: Installation declaration with appendix

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2008, veikimo valandos: 133 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 250 kg, keliamoji galia: 3 kg, rankos pasiekiamumas: 1 130 mm, valdiklio modelis: IRC5, Įranga: dokumentacija / vadovas, ABB IRB 360-3/1130 FlexPicker su mašininiu regos atpažinimo sistema: robotas atpažįsta atsitiktinai orientuotus produktus ir tiksliai išdėsto juos pagal nustatytą raštą. Robotas aptarnautas: Nauja originali akumuliatoriaus baterija Sutepami sujungimai Robotui atlikta kalibracija Komplektacijoje: Robotas Valdiklis Kamera Kabeliai FlexPendant pultas Roboto stovas / aliuminio rėmas 642-2 German 709-x DeviceNet 709-1 Master/Slave Single 605-1 Multiple Axis Positioner Kjdpjxqhh Isfx Agfsdi 606-1 Conveyor Tracking 608-1 World Zones 609-1 Fixed Position Events 610-1 Independent Axis 611-1 Path Recovery 616-1 PC Interface 618-1 Fieldbus Command Interface 620-1 File and Serial Channel Handling 672-1 Socket Messaging 621-1 Logical Cross Connections 622-1 Analog Signal Interrupt 626-1 Advanced RAPID 631-1 Electronically Linked Motors RW Drive modulis 1 raktas ABB standartinis manipuliatorius IRB 360 360/3 Standartinis Papildomų ašių pridėjimas IRB/variklio modulis 340/360

Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 204065, Used CNC Cutter/Plotter Machine Cutting Area X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment of the Used Machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a powered rotary knife, electrically oscillating knife, and a milling unit (including extraction system) • Multifunctional tool head accommodates up to 2 interchangeable tools • High-performance vacuum blower for material fixation • Standard gray conveyor belt table (Conveyor). Green-blue exchange conveyor available (offers high contrast for dark materials) Further tools available as options (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal cutter • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Printer mark detection • Camera registration • Punch tool for notches or holes • Milling unit with extraction system Kdsdpjif Ek Refx Agfsi Operator-Friendly • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade changes • Vacuum zones can be activated at the click of a button Fast Return on Investment • Low costs with high added value • Optimal material utilization via nest expert software modules (not included) • High speed • Consistent precision Specifications: • Short cutting cycles due to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers • Suitable for sheet or roll materials (expandable with appropriate unwinder) • Fast return on investment (Product photo as sample) The machine is CE-certified.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The CO2 laser plotter is designed for cutting and engraving a wide range of materials, such as acrylic (plexiglass), leather, rubber, wood, plywood, paper, cork, textiles, and various engraving laminates. This is a versatile and highly practical device used in production processes across multiple industries. The CO2 1490 laser is ideal for prototyping, small-scale production, and customization. Laser technology ensures high precision in cutting and engraving as well as speed and accuracy when manufacturing complex patterns and details. - Tube power: 100 W - Table type: knife blade + honeycomb - Cooling: water-cooled - Machine power: 1000 W - Weight: approx. 300 kg - Power supply: 230 V±10%/50-60Hz - Interface: USB - Working area: 1400 x 900 mm - Positioning accuracy: ±0.01 mm - Engraving speed: 1-800 mm/s - Drive system: stepper motors (servo option available) - Positioning system: red dot (laser) Kedpfx Asur Sv Esgfedi - Cutting speed: 1-600 mm/s The plotter comes with modern control software that is compatible with programs such as Corel Draw and AutoCAD.

Būklė: naudotas, Gamybos metai: 2025, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2025-078, darbinis plotis: 1 600 mm, darbinio aukščio: 100 mm, pjovimo plotis (maks.): 1 600 mm, įrankių magazino lizdų skaičius: 2, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 1,500 x 1,600 mm (demonstration model) Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, industrial textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard grey conveyor belt table (conveyor) • Maximum material height 100mm Additional tools available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal cutting knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Print mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system Kedjwgc I Ropfx Agfjdi User-friendly • Easily replaceable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade changes • Vacuum zones activated at the push of a button Rapid ROI • Low costs with high added value • Optimal material utilization through nest expert software modules (not included) • High speed • Consistent precision Technical Data: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll material (optionally extendable with suitable unwinder) • Quick ROI (Product image for illustration only) The machine is CE-certified.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Citizen CINCOM M12 – Swiss-Type CNC Automatic Lathe / Sliding Headstock Machine year: 1999 Bar feeder year: 2009 Technical specifications: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Subspindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – milling, drilling, and threading capabilities Kjdpjyt D Azjfx Agfodi Equipment: • LNS Tryton 112 bar feeder • Guide bushings • Driven (live) tool holders • Set of static tool holders • No chip conveyor M12 Axis count: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 Tool list: Gang tool post: T1-T5 static tools T6-T8 driven tools (holders included) Turret: T20-T29 static or driven tools, multiple tool installation possible per station Backspindle tool post: T41-T43 static tools, live holders not installable Condition: The machine is in very good condition, has undergone a technical inspection, and is ready for immediate operation. Application: High-precision production lathe for serial manufacturing of small turned parts from bar stock Ø 1–12 mm. Additional information: • Full documentation available and machine can be tested under power. • Transport and loading by request.

Būklė: naujas, Gamybos metai: 2024, Everything can be configured upon request, with very short production and delivery times. Additional information is available upon request. Technical specifications available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostics (Ethernet) - Lantek software with automatic nesting - Workpiece positioning by laser - DURMA torch height control - Dual-side drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC control outputs/inputs for the filter unit - Consumables starter kit - Plasma torch * Kdedpjfirx Tefx Agfsi - Ignition console * - Torch height control with ball screw spindles on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE standard safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multiple drilling head - Filter for 130A, 260A, or 400A - Pipe cutting unit Ø50 mm - Ø400 mm - Additional support for the pipe cutting unit - Warning lamp for errors and end of program With over 60 years of experience in the research and production of sheet metal processing machinery, manufacturing 8,000 machines annually in three state-of-the-art production facilities covering a total area of 150,000m², Durmazlar Group and its DURMA machines are among the internationally renowned manufacturers in their sector. Their products are distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hessen region. We are your direct contact from Durmazlar, offering knowledgeable advice and support regarding sheet metal processing machinery. Our demonstration center allows you to get a first-hand look at our machines, to experience the quality and precision technology up close, and to receive the best possible consultation tailored to your business objectives. Our mission is to be your direct on-site contact and provide you with comprehensive services, including training and customer support. We are pleased to support you from Germany—from initial consultation, through the purchase, and throughout the entire lifecycle of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, spalva: geltonas, tuščias svoris: 35 600 kg, didžiausias leistinas svoris: 10 000 kg, kėlimo aukštis: 4 500 mm, padang padangų: 80 procentas, pavaros būklė: 80 procentas, ašių konfigūracija: 4x4, sėdimų vietų skaičius: 1, stiebo tipas: dupleksas, stabdžiai: variklio stabdymas, pakaba: oras, Gamybos metai: 2007, veikimo valandos: 42 500 h, Įranga: ABS, borto kompiuteris, diferencialo užraktas, griebtuvo hidraulika, hidraulika, kabina, pakreipiamas vežimėlis, papildomi žibintai, reguliuojamas strėlė, visų varančiųjų ratų pavara, For sale: Wheel loader imported from its first and only owner, equipped with a heavy-duty log grapple for transporting timber or similar materials. Regularly serviced exclusively by the original owner, who operated the machine from new. Thanks to its 4x4 drive, it excels in any terrain, further enhanced by a robust Volvo engine delivering 320 horsepower – this is the HEAVY DUTY, highest power version of its era. According to the last owner, many expensive parts have already been replaced: - At 34,000 hours: gearbox replaced and REMAN system complete overhaul. - At 25,000 hours: front differential replaced with a new unit. All engine and hydraulic oil changes performed at scheduled intervals. The grapple is currently mounted for testing purposes – all systems fully functional. We offer paid transport preparation, which includes removing the grapple to minimize machine height for shipping. For more details, please contact the seller. Included in the price: - Complete set of documents for registration. - If a UDT inspection is required, we can arrange this quickly for an additional fee. We offer all forms of payment: - Leasing, credit, cash, or bank transfer. - With cash or bank transfer payment, you can drive the machine out immediately. Additionally, we provide insurance services – we will calculate the lowest premium for any vehicle. Try us! Kedpfexw H I Hox Agfedi We can also deliver paid-for vehicles and trucks to any address across Europe. For more information about our services, please speak to a sales representative. Technical specifications: VOLVO L 180 E - Year of manufacture: 2007 - Operating hours: 42,500 h - Engine: Volvo D12D / D12C (High-Power version), 6-cyl. turbocharged, intercooler - Displacement: approx. 12.1 L (12,000 cm³) - Max power: ~234 kW (318 HP) — ISO 9249 / SAE J1349 - Max torque: ~1,590–1,603 Nm (at ~1,400 rpm depending on measurement standard) - Engine working range: 800–1,600 rpm (economic range) - Transmission: PowerShift automatic (multiple work programs), 4x4 drive, differential locks - Breakout force: approx. 214.7 kN - Tipping load (full turn): approx. 10 tons - Operating weight: 35,600 kg - Bucket capacity: Typically 3.7 – 14.0 m³ (most commonly 4.6 m³ on standard buckets; application dependent) - Standard tyres: 26.5 R25 or option 775/65 R29 - Max speed: ~37 km/h (depends on gearing and tyres) - Hydraulic system capacity: approx. 156 L (hydraulic oil; depending on setup) - Fuel tank capacity: approx. 335 L (according to Volvo documentation; depends on year and configuration) - Cab/equipment: Care Cab, comfortable Volvo cab, options incl. BSS (boom suspension system), CLS (central lubrication system), Contronic monitoring, air conditioning Inspection report: - Loader was actively working up to the purchase moment - Inspected and prepared for sale - Fitted with a log grapple arm Price listed is net (ex. VAT) and valid for export and businesses. Retail customers may receive a substantial discount – We encourage you to contact us by phone directly to receive your best offer!

Gamybos metai: 2024, būklė: naujas, The DA-69T control provides both 2D and 3D programming, including automatic calculation of the bending sequence and collision detection. Comprehensive 3D machine setup with multiple tooling stations delivers immediate feedback on product feasibility and handling. Delem-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection—combats climate change and the greenhouse effect, benefiting future generations as well! AD-S 30175 with Y1, Y2, X, and R axes Bending force: 175 tons Bending length: 3050 mm Clearance between uprights: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Tool opening height including beam penetration depth: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pcs Backgauge fingers: 2 pcs Press brake force and speed. X-axis: 500 mm/sec X-axis travel range: 650 mm Maximum R axis speed: 350 mm/sec R axis travel range: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx. 11,500 kg Control: Delem-69T Options: Y1, Y2, X, R (4-axis), X=650 mm X, R Control – CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC-controlled motorized crowning Movable front support arms with T-slot, clip stop, and full-length guide Backgauge: Siemens DC servo motor drive & linear guide & ball screw system Guarding Kdodpsd Tpadofx Agfoi CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila hydraulic top tool clamp – NSCL-I-HC/UPB – PRO – Max load 180 t/m – Powerpack required Wila hydraulic lower tool clamp – NSCR-I-HC-CNC/UPB – PRO – Max load 200 t/m – Powerpack required Powerpack for hydraulic clamping DAM (Durma angle measurement system) 2 YEARS WARRANTY The machine can be viewed and demonstrated at our showroom in Staufenberg by appointment at any time. Further demonstration-ready machines are available at our Staufenberg facility. Further information is available upon request.

Gamybos metai: 2024, būklė: naujas, The DA-69T control system offers both 2D and 3D programming, including automatic calculation of bending sequences and collision detection. The complete 3D machine setup supports multiple tool stations and provides instant feedback on product feasibility and handling. DA-69T Features: • 3D and 2D graphical touchscreen programming • 3D visualization for simulation and production • 17-inch high-resolution TFT color display • Full Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection – climate change and the greenhouse effect will thank us, as will future generations! • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings through start-stop technology • Faster than hydraulic press brakes • Lower operating costs • Significantly reduced service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) • No harmful oil • Quiet – efficient – independent of hydraulic oil – low-noise operation • Relaxed and stress-free bending • Full working area • Touchscreen operation Machine Dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Ksdpfx Asd Sak Sogfedi Technical Details: Bending length: 1,250 mm Clearance between uprights: 1,300 mm Press force: 400 kN (40 tons) Control: CNC ModEva 19T Backgauge controlled axes: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel range: 650 mm X-axis traversing speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Operating speed (R): 350 mm/s R-axis travel range: 250 mm Motor output: 7.5 kW Weight: approx. 4,500 kg Standard Equipment: Control: Cybelec ModEva 19T CNC-controlled crowning Top clamping system: Durma (European) Bottom clamping system: 60 mm holders Backgauge: AC servo motors with ball screw Option includes: Fiesseler safety system AKAS II M FPSC-B-C Control: Delem DA 69T CNC-controlled backgauge X, R, Z1, Z2 Hydraulic top tool clamping Durma (type Wila) Hydraulic bottom tool clamping Durma (type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our Staufenberg site. Further information available on request.

Būklė: labai geros būklės (naudotas), Four-head paper drill. Multiple units available!!! Brand: Hang Model: 106DTK4 Details: 4-head paper drilling machine with adjustable drilling heads Operation: Electric foot switch, 2 speeds Available immediately These additional details are standard for this model. Always verify specifics carefully during inspection. The Hang 100DTK4 printing machine from 1975 is an iconic and reliable piece of equipment that made a significant impact in the printing industry. Manufactured by Hang, this machine offered advanced features for its time and set a benchmark for high-quality and efficient printing. The Hang 100DTK4 is characterized by its robust and durable construction, ensuring stability and consistent performance throughout the printing process. Its printing technology, while conventional by today's standards, enabled precise and sharp prints with satisfactory resolution for its era. Kdedpfx Asudl Iksgfei Equipped with user-friendly controls and mechanical automation, the machine provided programmable settings for various formats and print configurations. Operation required skilled operators capable of achieving precise and repeatable print results. The printing press was suitable for various substrates, including paper, cardboard, and lightweight board, catering to a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 showcased technological advancements of its era. Its lasting performance and contributions to the printing industry are noteworthy. While newer presses with advanced digital technology have emerged, the Hang 100DTK4 remains a historical symbol of efficiency and innovation in 1970s print production. This machine holds collector value and serves as a testament to the evolution of printing technology over the decades.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, iAM Marketplace – the official used machinery partner of Stratasys! Multiple professionally refurbished Stratasys Fortus 450mc 3D printers are available immediately. Each machine undergoes a comprehensive inspection in line with strict standards, focusing on all printing-relevant components, refurbished, and validated through multiple test prints. The result: reliable performance, high print quality, and an economically attractive alternative to buying new equipment. The machines differ in year of manufacture, configuration, generation, and operating hours. Detailed information on condition as well as pricing is available upon request. Ksdpfx Asyvz Smogfodi The Stratasys Fortus 450mc is an industrial FDM 3D printer with a build envelope of 406 x 355 x 406 mm. The machine is suitable for functional prototypes, production tools, end-use parts, and small batch applications. It impresses with high dimensional accuracy, repeatable print results, and reliable performance in industrial settings. Thanks to its broad material compatibility—including high-performance and ESD-safe materials—the Fortus 450mc can be flexibly used for various applications in manufacturing, aerospace, automotive, and general industry.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sabroe / York / Stal Ammonia Refrigeration Plant (NH3) General Specification of the Set: Main Brands: Sabroe, York, Stal, Arctos Ksdpfjyp H Tzjx Agfodi Refrigerant: R717 / NH3 (Ammonia) Description: Complete, high-capacity industrial refrigeration system comprising multiple integrated modules. The full line includes: 1. Screw Compressors: - Sabroe SAB 83 (Year 2004): Displacement 1603 m³/h, speed 3600 rpm, dimensions: 3900 x 1250 x 2150 mm. - York Refrigeration SAB 83 (Year 2001): Displacement 1331 m³/h, speed 2950 rpm, dimensions: 3150 x 1300 x 1600 mm. Set includes a 675 l pressure vessel (800 x 800 x 2150 mm). - ABB Stal Refrigeration S26B (Year 1994): Dimensions: 1550 x 1450 x 2400 mm. - Stal Refrigeration AB SVA26E (Year 1991): Compressor type S26A-25, displacement 700 m³/h, dimensions: 1600 x 1000 x 2420 mm. 2. Separator Tanks and Pumping Stations: - Stal-Astra NH3 Separator (Year 1991): Insulated, capacity 4300 l, dimensions: 4100 x 1400 x 1400 mm, equipped with ammonia pumps. - Stal-Astra NH3 Separator (Year 1991): Insulated, capacity 3000 l, dimensions: 4100 x 1100 x 1100 mm, equipped with ammonia pumps. 3. Additional Equipment and Control Systems: - Arctos ARLEX ND Deaerator (Year 2018): Modern module supporting the efficiency and safety of R717 refrigerant operation, dimensions: 570 x 400 x 1100 mm. - Main Control Cabinet: Advanced central unit, 4.8 m long, equipped with a modern Siemens HMI touchscreen panel, dimensions: 4800 x 630 x 2200 mm. - Rittal Control Cabinet: Equipped with a WEG variable frequency drive (inverter), dimensions: 1000 x 600 x 2280 mm. This powerful refrigeration plant combines proven, high-performance screw compressors from leading manufacturers. The presence of large, insulated separator tanks with integrated pumps ensures adequate power reserve and operational stability in ammonia circuits. Despite the varying ages of individual components (from 1991 to 2018), the system forms a coherent whole, managed by an advanced control centre featuring Siemens and WEG solutions.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: vadovas, automatizacijos lygis: vadovas, pavaros tipas: vadovas, Lenkimo kampas (maks.): 130 °, bendras svoris: 280 kg, garantijos trukmė: 24 mėnesiai, Sheet Metal Folding Machine / Bending Machine / Box and Pan Brake - RG-C 2012 + Sheet Metal Guillotine (Roller Shear) 2.0-Meter Sheet Metal Bender – Professional Tool for Roofers Our 2.0-meter sheet metal bender is a durable and precise machine for roofers and sheet metal professionals. With its robust construction and advanced mechanisms, it ensures high reliability and user-friendliness, even under intensive use. Equipped with additional performance-enhancing features, this model allows for higher precision, repeatability, and easier handling of sheet material. Key Features: ✅ Working length: 2100 mm – enables efficient bending of sheets and increases productivity. ✅ Robust steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for the fabrication of roofing components, sheet cladding, and gutters. ✅ Easy operation – an intuitive control system enables quick and precise sheet forming. ✅ High clamping force – stabilizes the material and ensures a consistent bend along the entire length. ✅ Optional accessories – can be equipped with additional features for enhanced functionality. Our 2.0-meter sheet metal bender is an essential tool at any job site, improving the quality and efficiency of roofing work. ❗️2.0-Meter Sheet Metal Bending Machine – Technical Data❗️ Max bending length: 2100 mm / 83" Max bending capacity: ➡️ Steel sheet: up to 1.2 mm ➡️ Aluminium sheet: up to 1.5 mm ➡️ Copper and zinc sheet: up to 1.5 mm ➡️ Stainless steel sheet: up to 0.6 mm Max bending angle: 130° Bending beam thickness: 25 mm Max clamping beam stroke height: 100 mm Overall dimensions: 2460 x 900 x 1200 mm Weight: Approx. 280 kg (varies depending on configuration) Clamping system: Manual, with high clamping force for stable operation Construction: Robust steel frame for durability and precision Kjdpfov D Hw Sjx Agfsdi Accessories (included): ▪️Rear support arms for large sheets ▪️Functional protractor for precise angle bending ▪️Roller shear – for fast and precise cutting of sheets along the machine’s working length Optional accessories (not included): Swivel castors with locking mechanism Enhanced features for precision and efficiency: 👉 Rear support table – simplifies sheet positioning for smooth, accurate processing. 👉 Protractor – ensures repeatable bending angles for consistent results. 👉 Front depth stops – allow cutting multiple sheets to the same width without additional measurements. 👉 Heavy-duty steel springs – support the bending beam, provide lifetime durability, and eliminate the need for replacement, unlike gas springs. 👉 Turnbuckle adjustment – allows fine-tuning of clamping beam force according to sheet thickness, ensuring secure and even holding. Applications and Benefits: This 2.0-meter sheet metal folding machine is an indispensable tool for roofers, sheet metal workers, and workshops, offering an efficient and precise solution for bending roofing components, flashings, and various sheet metal claddings. With user-friendly features, repeatable accuracy, and enhanced durability, it is the perfect choice for professionals seeking high-quality results. The price does not include shipping costs.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FM300SN is an advanced industrial transport fan designed for the extraction of sawdust, wood chips, and wood dust in demanding factory conditions. With a power rating of 2.2 kW and an extraction capacity of 3900 m³/h, this unit serves as an efficient sawdust blower for dust extraction systems, providing effective filtration and air purification directly at the source of contamination. Reliability, high performance, and compatibility with various woodworking machinery make it an ideal choice for professional wood processing facilities. Key machine features - 2.2 kW motor – designed for continuous, intensive operation Kdedpfx Agsvu Amkofsi - High extraction performance of 3900 m³/h – effective removal of sawdust, chips, and dust - Impeller speed 2850 rpm – optimal airflow with stable operation - Universal suction nozzles – 1×150 mm and 3×100 mm for simultaneous connection of multiple machines - Steel construction – resistant to mechanical damage, suitable for industrial environments Design and technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibrations, and heavy use. The aluminum impeller, mounted directly on the motor shaft, provides high efficiency and minimal energy loss. The fan is configured for three-phase 400 V / 50 Hz operation, allowing stable use in industrial plants without the risk of system overload. The suction nozzle system, featuring diameters of 3×100 mm and 1×150 mm, allows for the simultaneous connection of several machines or the use of reducers depending on the requirements of the extraction system. Precision and work efficiency FM300SN stands out for its high efficiency in conveying sawdust and dust, even under heavy contamination. Optimized aerodynamic parameters ensure constant airflow, preventing clogs in the duct system. As a result, this dust extraction fan not only ensures a clean working environment but also extends the service life of connected machines by minimizing their exposure to process dust. Application The FM300SN model is suitable wherever efficient extraction systems for sawdust and chips are required during woodworking operations. It is especially recommended for: - Carpentry workshops - Furniture manufacturing plants - Production of panels and solid wood components - Central dust extraction systems in production halls Compatible with machines such as: - Planers and jointers - Thicknessers - Spindle moulders - Panel saws - Edge banders Standard equipment - Powder-coated steel housing - Three-phase 400 V motor - Direct drive aluminum impeller - Suction nozzles: 1×150 mm and 3×100 mm Optional equipment - Flexible hoses Ø100 mm, Ø120 mm, and Ø150 mm - Filter bags Technical data: Motor power: 2.2 kW Speed: 2950 rpm Extraction capacity: 3900 m³/h Suction nozzle diameter: 150 mm / 3x 100 mm Outlet nozzle diameter: 120 mm Voltage / frequency: 400 V / 50 Hz Dimensions (L x W x H): 440 x 430 x 450 mm Weight: 30 kg

Būklė: naudotas, USED 20DV DUO OFFICE CONTAINERS FROM ESSEN ✅ Container Type: Multiple Duo Office Containers / Double Containers 20DV ✅ Condition: Used, wind- and watertight, without equipment, original photos ✅ Equipment: Containers are equipped with electricity and heating, entrance door is on the short side. Containers are sold in used condition and may show signs of contamination, color differences, rust, etc. Containers are delivered without equipment (chairs, tables, etc.). ✅ Dimensions (LxWxH): 6,058 x 2,438 x 2,800 mm – clear internal height 2,500 mm ✅ Availability: From Essen ✅ Transport: Free & non-binding delivery quote (including unloading, if desired) – simply provide your postal code Ksdoyv Dihspfx Agfsdi ✅ Variety: In addition to office containers, we also supply sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, etc.) for storage, construction projects, logistics solutions, or sea transport Contact us today – we are happy to advise you! NAUTEXA GmbH – Your Container Partner

Būklė: naujas, Gamybos metai: 2026, Electric mast stacker with 1,500 kg capacity and 3,500 mm lifting height is an ideal warehouse solution for handling heavy loads. The robust steel construction ensures stability during lifting operations. Polyurethane rollers facilitate movement on uneven surfaces. This stacker enables fast and safe load transfer across multiple levels and in various conditions. Introduction to Electric Mast Pallet Stackers The CORMAK Q15E35 electric mast stacker is a versatile and highly efficient solution for material handling and lifting up to a height of 3.5 meters. Thanks to its innovative design and advanced technology, this stacker is perfect for use in warehouses, production halls, and distribution centers. Kdodpfx Agjrh E D Uefoi Key Benefits of the 1,500 kg Electric Pallet Stacker This model’s technical parameters include a lifting capability of an impressive 3,500 mm, allowing for effective handling of goods at various heights. With a lifting capacity of 1,500 kg, it is ideal for managing medium to heavy loads. Machine Features - Sturdy high-grade steel frame ensures greater rigidity and stability during lifting. - Special handle system transmits steering input directly to the wheel for precise maneuvering. - Integrated battery charger. - Lifting forks to maximum height without load takes just 25 seconds! - Maintenance-free brushless motor technology. - Battery charge indicator integrated in the control box. - Emergency stop switch. - Integrated controller protects the battery from over-discharge or damage. - Sealed, maintenance-free AGM battery. - No periodic maintenance required during the warranty period. Technical Specifications MAX LIFTING HEIGHT: 3,500 mm CAPACITY: 1,500 kg LOAD CENTER: 600 mm FORK LENGTH: 1,150 mm OUTSIDE FORK WIDTH: 570 mm HEIGHT WITH LOWERED FORKS: 2,330 mm HEIGHT WITH EXTENDED MAST: 4,000 mm MINIMUM FORK HEIGHT: 85 mm OVERALL WIDTH: 810 mm OVERALL LENGTH: 1,745 mm GROUND CLEARANCE: 30 mm TURNING RADIUS: 1,390 mm TRAVEL SPEED (LOADED/UNLOADED): 3.5/4 km/h LIFTING SPEED (LOADED/UNLOADED): 140/200 mm/s LOWERING SPEED (LOADED/UNLOADED): 120/100 mm/s GRADABILITY (LOADED/UNLOADED): 5/7% SERVICE BRAKE TYPE: Electromagnetic DRIVE MOTOR POWER: 0.75 kW LIFT MOTOR POWER: 2 kW BATTERY VOLTAGE / CAPACITY: 12V 75 and 120 Ah WHEEL MATERIAL: Polyurethane WEIGHT: 586 kg

Būklė: naujas, Gamybos metai: 2026, The manufacturer guarantees filtration quality. The certified control cabinet enables continuous monitoring of operational integrity. The 11 kW negative pressure fan (11,300 m³/h) functions on turbine principles, and its soundproofed housing significantly reduces noise emissions during operation. The entire extraction system is highly airtight, ensuring optimal indoor air quality and, during the heating season, preventing the loss of heated air. Advantages of DCV dust extraction systems: - Robust and sturdy construction, ensuring silent and vibration-free dust extraction operation - The new TC extraction series features a full top housing to absorb noise and vibrations generated during operation, as well as the option for warm air recirculation - Exceptional airtightness of the entire suction system, guaranteeing the best indoor air quality and no heat loss during the heating season - Powerful and quiet radial fan for high negative pressure performance - Ability to build a ceiling-mounted system to connect multiple machines operating simultaneously with DCV extraction - Reliable filter shaking system, capable of automatic cycle operation - Mobile chassis system for effortless relocation of extractors throughout the facility - Waste containers designed to maintain 99.99% system hermeticity, equipped with a mobile trolley system - Control cabinet for device on/off operations - Polyester filter retains dust particles down to 5 microns; for finer filtration (smaller particles), an additional filter such as HEPA is required - Use of this extractor is prohibited in explosive atmospheres - The extractor is not suitable for processing wet material (e.g., wet sawdust) - Before starting the extractor, the lower beam must be removed to allow easy access to the chip containers - Warm air recirculation kit available at extra charge Technical Specifications: - Power supply voltage: 400 V - Power rating: 11 kW Kjdpfxoudalwj Agfsdi - Motor speed: 3000 rpm - Filter material: Polyester - Filter dimensions: Φ160 x 960 mm - Number of filters: 64 units - Inlet diameter: 350 mm - Outlet diameter: 500 mm - Airflow: 11,300 m³/h - Dimensions (W x L x H): 1190 x 3160 x 2320 mm (excluding upper elbow) - Net weight: 710 kg

Būklė: naujas, Gamybos metai: 2026, Compact device utilizing FIBER technology designed for welding various types of metals, offering precision far superior to traditional welding methods. Advanced technological solutions used in the offered welder enable the creation of high-quality, repeatable welds on thin-walled materials and parts without the risk of deformation. Advantages of the laser welder: - Easy to operate – thanks to the implemented solutions and well-thought-out construction, the operator can begin work after brief training - Minimal indirect radiation; only protective goggles are required during operation to filter intense light - Significantly faster welding compared to traditional methods, with productivity potentially increasing by 3 to 10 times - Concentrated beam: minimal material structure change due to the small heat-affected zone - Repeatable welds: nice weld seams with high strength - Capability to weld very thin materials, such as 0.5 mm stainless steel - Option to weld with or without filler wire Maximum power: 2000 W Laser wavelength: 1080 nm Weld penetration depth (stainless steel at 1 m/min): 4.57 mm Weld penetration depth (carbon steel at 1 m/min): 3.59 mm Weld penetration depth (aluminium at 1 m/min): 4.0 mm Weld penetration depth (brass at 1 m/min): 4.0 mm Welding speed: 0–120 mm/s Automatic wire feeder: Ø 0.8 – 1.6 mm Maximum power consumption: ≤6.0 kW Cooling system: water-based Operating voltage: 400V Shielding gas consumption: 20 L/min Dimensions: 600 x 1100 x 1100 mm Weight approx.: 185 kg LATEST GENERATION WELDING HEAD - WOBBLE-type head - Automatic wire feeder included - Adjustable spot size: 0–5 mm - High-power welding head allows multiple beam path types: ○,―,•, ꓷ, 0, ▲, 8 - Integrated connections for shielding gas and cooling system Kdsdpfx Agsizr Rlsfoi - Interchangeable nozzles allow welding at various angles - 10 m fiber optic cable connects the head to the power source - Welding parameters adjustable directly on the head, eliminating the need to approach the control panel - Fully ergonomic: thanks to its lightweight and flexible design, the head can weld even in hard-to-reach places - Easy to service – fast and trouble-free protective lens replacement Set includes automatic wire feeder The wire feeding system is synchronized with the welder’s programming. The feeder’s task is to supply filler, allowing the operator to focus entirely on head operation. Set contents: - Laser welder with integrated cooling system - Welding gun with focal length adjustment and complete accessory kit - Fiber laser source - Automatic wire feeder - Complete set of cables - Starter set of nozzles and protective lenses WELDABLE MATERIAL THICKNESSES Material / WELDER POWER 1000 W 1500 W 2000 W Stainless steel 0.5–3.0 mm 0.5–4.0 mm 0.5–5.0 mm Carbon steel 0.5–2.5 mm 0.5–3.5 mm 0.5–4.5 mm Galvanized steel 0.5–2.5 mm 0.5–3.0 mm 0.5–4.0 mm Aluminium 0.5–1.2 mm 0.5–1.8 mm 0.5–4.0 mm Brass 0.5–1.2 mm 0.5–1.8 mm 0.5–2.5 mm

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, A multi-spindle drilling machine is a tool with numerous advantages that facilitate and streamline the drilling process. Its key feature is the capability to create holes at equal intervals and multiples thereof, making it adaptable to various projects while ensuring uniform distribution of holes. Each spindle reaches a speed of 2,840 rpm. The main advantages of this multi-spindle drilling machine include: - Pneumatic head with an adjustable inclination range from 0° to 90°, with tilt lock in any position and a 45° reference point, allowing for flexible set-ups and precise drilling. - Spindle drive is provided by a 1.5 kW electric motor, ensuring reliable and effective performance. - Quick-change chucks allow for fast installation of drill bits with diameters from 6–8 mm, increasing work efficiency. - 1,200 mm aluminum fence extension without a stop makes it possible to process large workpieces up to 3 meters in width. - High manufacturing precision of components guarantees accurate operation, and auxiliary rollers (820 mm wide) facilitate material handling. - Maximum drilling depth of 50 mm meets the requirements of most workshops. Kodpfxevuf Rls Agfodi - The drilling machine can make holes at any interval thanks to its 21 spindles, with the distance between the first and last spindle being 640 mm, offering great freedom in design. - Precise hole drilling is possible due to adjustable feed speed. - The drilling unit can be set at a 45-degree angle, ideal for drilling dowel holes in carcasses. - Table height adjustment is regulated via a mechanical digital indicator, further enhancing accuracy. - Pneumatic control by foot pedal allows convenient clamping, drilling, and releasing, contributing to user comfort. - Short setup times thanks to a reliable stop system help save time and increase productivity. - Advanced woodworking machine The CORMAK MZS21x1 is a professional, top-quality multi-spindle drilling machine designed to meet the demands of even the most demanding woodworking shops, delivering excellent results and high-quality drilling. The compact and ergonomic design ensures user comfort and high component accuracy, guaranteeing precise results in the drilling process. This tool excels across numerous industries, enabling efficient operation while maintaining the highest quality standards. Thanks to its advanced features and robust construction, it’s an ideal machine for experienced professionals seeking reliable and accurate equipment. If you’re looking for a woodworking machine with 21 spindles for producing multiple holes, the CORMAK MZS21x1 is a product that will certainly meet your expectations. Technical Specifications SPINDLE COUNT: 21 units SPINDLE PITCH: 32 mm MAX. DRILL DIAMETER: 10 mm MAX. DRILLING DEPTH: 60 mm MAX. BORING DIAMETER: 35 mm POWER SUPPLY: 400V MAX. WORKING AREA: 3,000 × 2,500 mm SPINDLE SPEED: 2,840 rpm REQUIRED OPERATING PRESSURE: 0.6 – 0.8 MPa MOTOR POWER: 1.5 kW DIMENSIONS WITHOUT TABLE EXTENSIONS: 1,400 × 1,300 × 1,400 mm WEIGHT: 350 kg

Būklė: naujas, Gamybos metai: 2026, The 10-ton ratchet jack is an exceptionally robust mechanical device designed for lifting heavy structures, machinery, and vehicles. Manufactured from damage-resistant steel, it ensures safety, stability, and long service life even under the most demanding working conditions. Ideal for railway, construction, and industrial applications. Advantages of the 10-ton ratchet jack: ✅ 10,000 kg lifting capacity – perfect for handling heavy machinery, structures, and vehicles. ✅ Mechanical design – operates independently of any power supply, ready for use anywhere. ✅ High level of safety thanks to a ratchet locking system. ✅ Precise height adjustment allows for accurate load positioning. ✅ Excellent resistance to external factors – moisture, dust, vibrations, and low temperatures. ✅ Easy transport – compact dimensions and ergonomic construction. ✅ Suitable for multiple industries. Technical data MODEL MJ10 Rated lifting capacity: 10,000 kg Head width: 120 mm Base width: 140 (210) mm Overall height: 795–1155 mm Lifting range of toe: 70–430 (30–390) mm Toe length: 80 (75) mm Body thickness: 73 mm Base length: 175 (170) mm Gearbox height: 330 mm Body width: 252 mm Gearbox axle distance: 185 mm Support length: 220 (280) mm Side housing length: 250 mm Net weight: 45 kg Kedpfoxqxwmjx Agfjdi