Mkr 150 pirkti naudotą (10 467)

Būklė: geras (naudotas), Stalo spaustuvas, šaltkalvio spaustuvas, lygiagretus spaustuvas - Žandų plotis: 150 mm - Suspaudimo plotis: 315 mm - Kiekis: 1 spaustuvas prieinamas - Kaina: už vienetą - Matmenys: 570/220/H400 mm - Svoris: 52,7 kg Kwodpfx Asyq Hkpjgfsw

Būklė: geras (naudotas), Support bracket, mount, support block, supporting leg for conveyor belt, belt conveyor, transport belt, conveyor belt system, roller conveyor Kwsdpfx Ajh Eciyogfew - Support block: height adjustable, swiveling - Height: up to approx. 620 mm - Width: 540 mm - Dimensions: see photos - Quantity: 2 brackets available - Price: per piece - Overall dimensions: 665/150/H617 mm - Weight: 13.4 kg/pc.

Būklė: geras (naudotas), Bracket, holder, support stand, support bracket for conveyor belt, belt conveyor, transport belt, belt conveyor system, roller conveyor Kwjdjh Ecirjpfx Agfew - Support stand: height-adjustable, pivotable - Height: up to approx. 650 mm - Width: 550 mm - Dimensions: see photos - Quantity: 12 brackets available - Price: per piece - Overall dimensions: 665/150/H650 mm - Weight: 15.3 kg/each

Būklė: geras (naudotas), X ašies eiga: 12 000 mm, Y ašies eiga: 7 300 mm, Z ašies eigos atstumas: 3 000 mm, bendras ilgis: 30 000 mm, stalo ilgis: 12 000 mm, stalo plotis: 4 730 mm, bendras plotis: 12 000 mm, bendras aukštis: 10 475 mm, stalo apkrova: 250 000 kg, bendras svoris: 400 000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Manufacturer: Waldrich-Siegen - Type: PF-F-150(1)-530/400 X-Axis: 12,000 mm Y-Axis: 7,300 mm Z-Axis: 3,000 mm W-Axis: 4,000 mm Distance between uprights: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table traverse speed: 10,000 mm/min W-Axis feed: 3,000 mm/min T-Axis feed: 6,000 mm/min Transversely movable milling head Vertically adjustable cross beam Horizontal hydrostatic spindle ram Milling spindle diameter: 560 mm Tool holder: ISO 60 C-Axis feed: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-Axis travel: 3,000 mm Z-Axis feed: 2,000 mm/min Küma angle head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Kjdpfoytrxkex Agfsww Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angle head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amps Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table Assembly: • Renewal of slideways • Regrinding of guideways • Renewal of table drive • Direct linear measuring system • Hydrostatic guideways Portal and Cross Beam: • Modification of adjustment spindle • Trapezoidal spindle replaced by ball screw • Direct linear measuring system • New drive motors to increase milling axes traverse speeds • New milling slide with hydrostatic guideways Electrical System: • Completely new control cabinet • Complete new wiring • Siemens Sinumerik 840D CNC – 6 axes Equipment: • Completely new Raumag-Janich protective covers • Completely new double chip conveyor • Large tool package • Extensive clamping devices Machine under power in Europe Immediately available Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine casings. Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, they do not constitute representations or warranty terms. We recommend verifying all crucial details.

Būklė: naujas, Gamybos metai: 2010, veikimo valandos: 72 154 h, spaudimo jėga: 800 kN, varžto skersmuo: 25 mm, darbinio tūrio: 54 cm³, ARBURG Allrounder 900 T 800-150 Sandėlio Nr.: 503576 Gamintojas: ARBURG Modelis: Allrounder 900 T 800-150 Valdymas: Pagaminimo metai: 2010 Darbo valandos: 72154 val. Techniniai duomenys – uždarymo pusė Uždarymo jėga: 800 kN Stulpelių tarpai a x v: 900 x 900 mm Minimalus įdėjimo aukštis: 250 mm Didžiausias plokščių atstumas: 550 mm Atidarymo eiga: 300 mm Apvalaus stalo diametras: 900 mm Išstūmėjo eiga: 150 mm Išstūmėjo jėga: 46 kN Judamos plokštės centruotė D: 90 mm Fiksuotos plokštės centruotė D: 90 mm Techniniai duomenys – įpurškimo pusė Sraigto diametras: 25 mm Tūris: 54 ccm Įpurškimo slėgis: 2500 bar Sraigto ilgis: 24 l/d Sraigto sukimo momentas: 210 Nm Plastifikavimo našumas: 49 g/s PS Įpurškimo našumas į erdvę: 80 g/s PS Matmenys ir svoris Įrenginio matmenys (I x P x A): 3,8 m x 1,85 m x 2,15 m Bendras svoris: 5000 kg Ksdpfx Agsytd Spefoww Įranga Ekrano tekstas vokiečių kalba 1 oro vožtuvas Įrenginys su apvaliu stalu Įrenginys su vandens baterija Niveliavimo elementai BDE sąsaja

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Universalus hamburgeriams, dešrainiams, bandelėms, sumuštiniams (panini) ir kitiems gaminiams skirtas pjaustymo ir rėžimo įrenginys. Kedpoinwg Isfx Agfjww Galimi pjaustymo variantai: visiškas perpjovimas, dalinis pjūvis, dvipusis pjūvis („butterfly“ tipo). Tinkamas gaminiams, kurių matmenys: plotis iki 150 mm, aukštis iki 80 mm. Reguliuojamas pjūvio aukštis ir plotis, reguliuojamas konvejerio ir pjovimo greitis. Darbo našumas apie 100 vnt./min. Įrengta ratukais, pilnai pagamintas iš nerūdijančio plieno, CE sertifikatas, pagaminta Europoje. Būklė – visiškai naujas, su garantija, sandėlyje, paruoštas siuntimui.

Būklė: geras (naudotas), Gamybos metai: 1999, Techninės detalės pateiktos nuotraukose. Rankomis rodomos dalys nepridedamos. Ksdsyvih Nspfx Agfoww

Būklė: naudotas, Gamybos metai: 2008, Lakšto plotis - maks. 5-150 mm Ritės svoris 2,0 t Juostos storis 0,2-1,5 mm Juostos greitis 0-20 m/min Pavaros sukimo momentas 290 Nm Stalo dydis 1500 mm Valdymas Siemens-Light Matmenys I-P-A 2.000 x 1.500 x 1.900 mm Bendras energijos poreikis 0,75 kW Mašinos svoris apie 0,6 t Kwjdpfxeyr Slhs Agfow

Būklė: naudotas, rida: 893 188 km, galia: 176 kW (239,29 AG), pirmoji registracija: 03/1975, kuro tipas: dyzelinas, sėdimų vietų skaičius: 50, pavaros tipas: mechaninis, spalva: smėlio spalvos,

Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 14 483 h, mašinos/transporto priemonės numeris: R84, Technical Specifications & Performance Data This aseptic carton filling machine is designed for reliable beverage manufacturing and industrial packaging applications. Manufactured by Tetra Pak, the A1 platform is configured for 150 ml slim cartons and delivers consistent output, making it suitable for a used filling line or integration into an existing packaging line. Its aseptic filling process and integrated straw applicator ensure high hygiene standards for dairies and beverage production. Manufacturer: Tetra Pak Model: A1 Machine version: 020V Drawing specification: E 30451-0200 Year of manufacture: 2003 Output: 12,000 units/hour Primary format: 150 ml slim carton Previous configuration: From 200 base to 150 slim Scope of supply includes: Straw applicator SA1, conveyors, spare parts Operating hours: 14,483 Advanced Automation & Control Systems The system is equipped with state-of-the-art automation to ensure stable aseptic operation and repeatable format handling. The controls ensure synchronized operation between filler, straw applicator, and conveyors for efficient industrial packaging. PLC/HMI: Emerson control platform Automation: Integrated control for filler, applicator, and conveyors Aseptic process management: Designed for consistent, hygienic operations Safety & control: CE-compliant safety logic and emergency stop interlocks Production Line Integration Capabilities This A1 aseptic filling unit integrates smoothly with upstream and downstream packaging machines, making it an excellent choice for upgrading a used filling line or expanding a beverage production cell. The included conveyors enable easy connection to case packers or secondary packaging. Mode of operation: Inline with conveyors (standalone control capability) Included integration components: Conveyors, SA1 straw applicator Format change: Configured for 150 ml slim; previously 200 base Application: Ideal for milk and compatible aseptic products Machine Condition & Maintenance History The filler is reported to be in production and fully operational, demonstrating its immediate suitability for beverage production environments. Overhaul activities were recorded in 2022, and spare parts are included to ensure ongoing reliability and readiness. Status: In production and operational Overhaul: Work recorded in 2022 Kodpfx Aoyviniegfoww Spare parts: Included Operational Performance & Versatility Optimized for milk

Būklė: geras (naudotas), Gamybos metai: 2002, Kuka KR150 serijos robotas, 2000 m. serija Kwedpfx Agebhgxbefow Pagaminimo metai: 2002 Veikimo diapazonas: 2700 mm Svoris: 1245 kg Keliamoji galia: 150 kg Valdymas: KRC2 Svoris: 185 kg Programinės įrangos versija: V4.1.7 SP08 Kuka KCP2 Jungiamieji kabeliai: 7m/15m 19326ä

Būklė: naudotas, Gamybos metai: 1996, Talpa: 3000 kg Kedsyt R Azepfx Agfjww Galingumas: 1500 kg/h Laipsnis: 1200 °C Šildymo galia: 1700 kcal/KW Mašinos svoris: apie 39 t Metalo temperatūra: 720°C Kuro rūšis: gamtinės dujos Techniniai duomenys pateikti gamintojo arba operatoriaus ir mums nėra įpareigojantys. Tarpinis pardavimas galimas; galioja tik mūsų bendrosios verslo ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų įrenginių sandėlyje daugiau nei 15 000 m² sandėliavimo ploto, krano keliamoji galia 70 t daugiau nei 10 000 dirbtuvių priedų Norite parduoti įrangą, gamybos linijas ar visą įmonę? Susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūros galimos pagal susitarimą. Laukiame Jūsų apsilankymo! Jūsų Markus Hirsch komanda

Būklė: naudotas, rida: 61 900 km, galia: 382 kW (519,37 AG), pirmoji registracija: 03/2025, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, stabdžiai: retarderis, spalva: juodas, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2023, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, oro kondicionavimas,

Būklė: naudotas, Gamybos metai: 2004, bendras aukštis: 2 620 mm, bendras plotis: 1 450 mm, bendras ilgis: 2 650 mm, Tuščias svoris: 2 500 kg - Pagaminimo metai: 2004 - Dokumentacija prieinama: Ne - Yra CE žymėjimas: Taip - CE sertifikatas prieinamas: Ne - Serijos numeris: 180253 - Valdymas: Konvencinis - Preso modelis: Dirbtuvių presas - Preso tipas: Vienkryptis - Presavimo galia [t]: 150 - Didžiausias eiga [mm]: 340 - Stalo plotis [mm]: 1570 - Stūmoklio ilgis [mm]: 280 Ksdpfsytghtox Agfsww - Stūmoklio plotis [mm]: 200 - Aukščio reguliavimas [mm]: 800 - Stūmoklio greitis [mm/s]: 5 - Kolonų atstumas plotyje [mm]: 1570 - Transportavimo matmenys: 2650 mm x 1450 mm x 2625 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2500 kg - Transportavimo pakuočių sk.: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir priėmimas mainais galimi bet kuriam pramonės sektoriaus gaminiui Lukas van Rossum

Būklė: naujas, Gamybos metai: 2024, Būklė: nauja Pagaminimo metai: 2024 Sandėlio numeris: 7321 Pristatymo laikas: iš karto, galima tarpinė prekyba Kilmės šalis: Turkija Kwjdpfswiqp Uex Agfew Kaina: 12 500 € Lizingo įmoka: 216,96 €/mėn. Sandėlyje: 1 vnt. Speciali kaina: 11 300 € Presavimo jėga: 150 t Cilindras: fiksuotas arba horizontaliai stumdomas Eiga: 300 mm Laikiklio tarpas: 1570 mm Stūmoklio skersmuo: 280x200 mm Darbo greitis: 5 mm/s Grąžinimo greitis: 10 mm/s Ilgis: 2630 mm Plotis: 1000 mm Aukštis: 2480 mm Svoris: 2100 kg Horizontaliai stumdomas cilindras su užrakinimo svirtimi Plieno suvirinta konstrukcija Laisvai pasirenkama sustojimo pozicija Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V formos prizmai Aukštis reguliuojamas stalas Stalo pakėlimo – nuleidimo mechanizmas Valdymas valdymo svirtimi Atitinka CE reikalavimus Naudojimo instrukcija vokiečių ir anglų kalbomis

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, LEDINEK BSG 150 galvų galąstuvas su peilių reguliavimo įtaisu – sandėlyje – Slovakijos gamyba TECHNINIAI PARAMETRAI Variklio galia: 0,55 kW Galandimo ilgis: 440 mm Kwedpfxeihpl Ro Agfow Įrankio skersmuo: 125 mm - 203 mm Rankinis padavimas Veleno skersmuo: 50 mm Peilių reguliavimo įtaisas Staklių matmenys: 120 / 85 / 165 cm Svoris: 400 kg

Būklė: naudotas, rida: 49 000 km, galia: 110 kW (149,56 AG), pirmoji registracija: 04/2018, kuro tipas: dyzelinas, bendras svoris: 4 250 kg, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: kitas, sėdimų vietų skaičius: 4, Įranga: autonominis šildytuvas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, vonios kambarys,

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 9 000 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos greitis: 25 mm/s, bendras aukštis: 2 200 mm, bendras ilgis: 4 640 mm, bendras plotis: 2 650 mm, bendras svoris: 1 200 kg, šlifavimo ilgis: 2 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 4 640 mm, reikalingas plotis: 2 650 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Wide Belt Sander M2S92-150 with two sanding belts for manual grinding, matting, and polishing. Designed for processing steel, stainless steel, and brass. Not suitable for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Sanding unit with contact roller, manually shiftable from belt 1 to belt 2 - Electric table lift Kjdpov S Sr Refx Agfsww - Flat machine table - Workpiece stop rule on the machine table - Initial set of abrasive belts - CE-compliant - Operating manual + manufacturer's declaration according to Annex 2 This robust machine in a welded steel construction ensures exceptionally smooth operation. The two machine stands are designed with shaped sections, enabling processing of long workpieces. The three-roller belt guidance provides the operator with the largest possible open working area, facilitating convenient hand block sanding. The belt drive is via a three-phase motor with a dynamically balanced drive roller. Each belt is equipped with individually adjustable pneumatic tensioning, ensuring optimal belt tension for each unit. The dust extraction system is dimensioned to efficiently capture sanding dust and direct it to the extraction port when connected to a suitable extraction unit. For effortless operation, the sanding unit is mounted in backlash-free roller guides. The machine table is smoothly and quickly adjustable in height using the electric table lift. The table lift guides are maintenance-free. For loading, the table can be extended far enough to allow easy placement of workpieces without having to slide them under the sanding belt. All primary machine controls are user-friendly and centrally located on the front of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in "Light Grey" The standard machine comes equipped with two initial abrasive belts (W x L) 150 x 9000 mm and a contact roller, approx. 50° Shore hardness, for 150 mm belt width. Additional equipment: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted at the center of the table, below the insert frame. For operation, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for securing workpieces and consists of: the bearing with rotary axis, featuring a brake disc at the rear. The swivel mechanism is mounted at the front of the rotary axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. The swivel head has an additional indexing disc for precise positioning of workpieces to the sanding belt. The rotary and swivel axes are released pneumatically via foot switch; rotary axis movement is manual. Workpiece weight when using as a flat table with insert frame installed = 80 daN Workpiece weight when using the handling device, based on the clamping plate = 25 daN, or 120 Nm relative to the center of the rotary axis.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 7 000 mm, aukščio reguliavimo tipas: elektrinis, bendras aukštis: 2 200 mm, bendras ilgis: 3 550 mm, bendras plotis: 2 000 mm, bendras svoris: 870 kg, šlifavimo ilgis: 1 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 3 550 mm, reikalingas plotis: 2 000 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Belt Grinding Machine MS92-150 3-roller redirected abrasive belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Kjdpfstwb U Aex Agfsww Scope of delivery includes: - Machine base with connecting elements - Continuously variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric height-adjustable table - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment abrasive belt - Operating instructions + manufacturer’s declaration - CE-compliant design The robust machine frame made of welded steel construction ensures extremely quiet operation. The two machine bases have an offset to allow sanding of workpieces longer than the machine table. The abrasive belt runs over 3 deflection rollers, providing a maximally accessible working area for the operator, ensuring good handling especially with manual sanding blocks. The belt drive is powered by a three-phase motor with a balanced drive pulley. The belt has adjustable pneumatic tension. The dust collection system is adequately sized to capture the resulting grinding dust and channel it to the extraction nozzle, provided it is connected to a suitable extraction system. For fatigue-free operation, the grinding unit is mounted in backlash-free linear guides. The machine table can be quickly and easily adjusted to the correct workpiece height using the electric table lift. The table lifting guide elements are maintenance-free. For loading, the table can be extended so that workpieces do not have to be pushed under the abrasive belt during placement. The electrical controls for the main functions are user-friendly and centrally located on the machine. Machine paint: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The basic machine is supplied with one initial equipment belt (WxL) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Optional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted centrally under the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing assembly with the rotation axis, which has a brake disc mounted on the rear. The swivel assembly is mounted on the front of the rotation axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional index plate is mounted on the swivel head to allow fine alignment of the workpiece to the abrasive belt. Unlocking of the rotation and swivel axes is performed pneumatically via foot switches; movement of the rotation axes is manual. Maximum workpiece weight when used as a flat table with insert frame = 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate) = 25 daN or 120 Nm (relative to the center of the rotation axes).

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Staklės: Agathon 150 A įrankių galąstuvė Gamintojas: AGATHON (Šveicarija) Šlifavimo / darbo duomenys • Šlifavimo disko skersmuo: 150 mm • Šlifavimo disko plotis: 20 mm • Angos (vidinis disko skersmuo): 20 mm • Veleno apsisukimų dažnis: iki ~2 500 aps./min • Įrankio tvirtinimo sritis: • Plotis: apie 32 mm • Aukštis: apie 32 mm • Laisvo kampo nustatymas / ortogonalus laisvas kampas: iki apie 26° Elektros duomenys • Maitinimas: 3 fazės, 380 V, 50 Hz • Galia: apie 1,0 AG (~0,7–1,0 kW, priklausomai nuo šaltinio) Kedpoypb T Asfx Agfoww Mechaniniai / matmenų duomenys • Staklių svoris: apie 225–300 kg (priklausomai nuo modelio/komplektacijos) • Matmenys: • Ilgis ~820–850 mm • Plotis ~564–620 mm • Aukštis ~1 215–1 200 mm

Būklė: naujas, Gamybos metai: 2022, Juostos plotis: 150 mm Juostos ilgis: 3000 mm Stalo dydis: 960 mm x 352 mm Kwjdjgr Ufhspfx Agfjw Papildomas stalas: 330 mm x 330 mm Faneravimo šlifavimo įrenginys: taip Osciliacija: taip Šlifavimo agregatas pakreipiamas: taip Ištraukimo jungtis: 120 mm Variklio galia: 3 kW Staklių ilgis: 1900 mm Staklių plotis: 810 mm Svoris: 290 kg

Būklė: naujas, Gamybos metai: 2022, Band width: 150 mm Kwodpfx Agjgtdpusfow Band length: 3000 mm Table size: 960 mm x 352 mm Additional table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding equipment: yes Oscillation: yes Tiltable sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Būklė: naujas, Bottom blocks / crane hooks / hooks - 53 pieces: Bottom block - 40 tons for DH / DR / DMR (price and photos on request) Bottom block - 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block - 20 / 25 tons (1 piece) 2. Bottom block - 12.5 tons (1 piece) 3. Bottom block - 12.5 tons (without safety latch) (1 piece) 4. Bottom block - 10 tons (2 pieces) 5. Bottom block - 6.3 tons (1 piece) 6. Bottom block - 12 / 10 / 6.3 / 3.2 / 2.5 tons (3 pieces) 7. Bottom block - 5 / 3.2 tons (2 pieces) 8. Bottom block - 4 tons (2 pieces, unused with storage marks) Kedpsyvvbcsfx Agfjww 9. Bottom block - 3.2 tons (2 pieces, used) 10. Bottom block - 2.5 tons, without hook (2 pieces) 11. Hook for chain hoists - 2 / 2.5 tons (1 piece) Abus bottom blocks / hooks: 1. Abus bottom block - 30 tons (used) 2. Abus bottom block - 12.5 tons (new, without safety latch) Konecranes bottom block - 5 tons (used) Hook - 150 tons (2 pieces, new) Hook - 40 tons (1 piece, new) Hook size no. 2.5 (1 piece) Hooks - 15 pieces Hooks - 12 pieces Hooks - 15 pieces

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 194573, spaudimo jėga: 1 000 kN, Here we offer a well-maintained injection moulding machine. We are also happy to accept well-maintained machines from year of manufacture 2005 onwards as trade-ins. Please offer us your surplus machines. Current Tax Note and Advantage for Used Machines Starting 01.07.2025, used machines can also be tax-deducted with a special depreciation rate of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 EStG-E) Arburg 2-component injection moulding machine with complete service history Horizontal and vertical injection units Machine No.: 194573 Arburg 420C 1000-150/150 Year of manufacture: 2004 Control: Selogica Extras: - 2x core pull (simultaneous movements, adjustable holding pressure) - Intermediate stop for hydraulic rotary control - CF card drive - Interface for host computer Kedpfjhyumgex Agfjww - Interface for dosing device - Interface for conveyor belt - Machine prepped for Multilift - Select unit with connection - Installation height increased to 350 mm - High wear-resistant screws - Connection for blow-out device - 2-color (horizontal/vertical) injection units - Incl. diskettes/CF cards – complete documentation/manuals Clamping force: 100 tons / 1000 kN Tie bar spacing: 420 x 420 mm Mould plates: 570 x 570 mm Opening stroke: 500 mm Max. platen distance: 850 mm Mould height: 350 mm Injection unit 1 (150 size) Screw: 30 mm (high wear resistant) Shot weight: 65 g Shot volume: 78 cc Injection pressure: 2210 bar Injection unit 2 (150 size) Screw: 25 mm (high wear resistant) Shot weight: 45 g Shot volume: 54 cc Injection pressure: 2500 bar Weight/Dimensions Dimensions: 4.63 x 1.3 x 3.9 m (LxWxH) Weight: 4,000 kg Connected load: 125 A (pre-fused) Free delivery to invoice address up to buyer’s premises – buyer unloads at his own risk and responsibility from truck bed. The machine is offered function-tested. Further Information on our Offered Machines and Company: - We sell only our own machines purchased from ongoing production, from our warehouse in Hannover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT agents trading third-party property - All machines offered come from successful companies for whom maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, veikimo valandos: 21 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190332, Įranga: dokumentacija / vadovas, From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. Injection Moulding Machine, 3-colour or 2-colour (the 3rd unit can be deactivated via software) (horizontal/vertical, and the 3rd in L-position with safety enclosure) ##### Can also be converted to 2-colour operation ##### Available immediately from our stock in Hanover Manufacturer: Arburg Model: 420C 1000-150/150/60 Year: 2003 Machine number: 190332 Control system: Selogica Operating hours: only 21,200 h +++++ Clamping Unit +++++ Control: Selogica Clamping force: 1000 kN / 100 t Tie bar distance: 420 x 420 mm Platen size: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2080 bar Extras Kjdpfx Asgrzh Esgfoww 1 x ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 x Vertical injection unit mounted on supports for 2nd injection unit (instead of on tie bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 x open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00 1 x technology level 2 – servo-regulated hydraulic system with two regulated pumps for controlled machine movements, with travel-dependent, regulated ramping. Mould closing force build-up is programmable and regulated. The clamping force is held servo-regulated via the second pump. The build-up of nozzle contact force is programmable. Contact force manually adjustable; value is electronically maintained. 1 x technology level 3 hydraulic system with 3 regulated pumps for simultaneous movements of the main axes and faster secondary axis movements. On 2-component machines, this serves as hydraulic system for 2nd injection unit (technology level 2 required, VE 132/03) VE-130/40 1 x heating band for open nozzle VE-320/00 1 x 150 injection unit for vertical injection into the mould split line for 2-component processing VE-136/02 1 x position-regulated screw with control valve on the injection unit, including regulated back pressure, nozzle contact force manually adjustable VE-561/20 1 x position-regulated screw with control valve on multi-component machines – for 2nd injection unit VE-561/30 1 x 60 injection unit for horizontal injection into the mould split line as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 x for VE-906/00: 60 injection unit in L-position; unit lowered by 70 mm, including special separating plane, full protection VE-907/00 1 x 15 mm plasticising cylinder set (without nozzle), with relocated feed and pressure reducing valve, in highly wear-resistant design with sintered metal check valve (L-position) VE-908/00 1 x open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 x nozzle tip with radius 15 (L-position) VE-910/00 1 x heating band for open nozzle (L-position) VE-911/00 1 x position-regulated screw for the third injection unit