Lovio Juostinis Konvejeris pirkti naudotą (2 999)

Gamybos metai: 2023, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22023.0202.1000, Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Undercarriage made of robust box-section profiles Design in stainless steel, material 1.4301 Double-sided knife edge, radius approx. 5 mm Food grade conveyor belt, brand Habasit, color white Credpfx Aexch D Hedmsh Central drive station Gear motor by SEW included Food approved coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Including adjustment frame for 5 Viscotec dispensers Adjustment is generally made via profiles and clamping units Height adjustment is manual via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of individual dispensers can be made via elongated slots if required. Each dispenser can be individually adjusted side-to-side, as well as for tilt and in/against the conveying direction. Without side guides. Including engineering Including pre-assembly Including installation of dispensers at our facility Including in-house testing Surface finish: conveyor belt in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units in aluminum. 5 bars are transferred from an existing conveying system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Set-up: Main switch, emergency-stop switch, automatic on and off buttons Display for setting the speed in m/min and for delay time adjustment of the dispenser start signal Sensors for bar detection (each bar detected individually) Sensors and signals for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only stops our own machine. Including control cabinet construction with 50% reserve capacity Including premium sensors (distance photoelectric sensor that can measure and evaluate distance) Including upgraded control system (hardware and software can be expanded at any time without replacing the control system) Including HMI (display), approx. 7" size Including E-plan Including program Including in-house testing (interface test with Viscotec) Surface finish: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.

Sąlyga: paruoštas naudoti (naudotas), Juostiniai konvejeriai Prekės ženklas: LKOREMAN Crsdjv Hvguopfx Admoh *H5=A-A ilgis: 17 000 mm – Juostos plotis: 800 mm – Galia: 7,5 kW *H6=A-A ilgis: 15 000 mm – Juostos plotis: 800 mm – Galia: 5,5 kW

Sąlyga: naujas, Gamybos metai: 2025, Extra-large version of the I-, Z-, or L-shaped modular belt conveyor, which transports the product from the vibratory feeder to the weighing unit. Open construction, hygienic, water-resistant plastic conveyor. - Specifications: 380V/1.1kW; dimensions and weight depend on the final system configuration. Cjdsv Nmnbspfx Admerh The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are often below typical used equipment prices. Feel free to enquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. - All machines come with a full warranty.

Sąlyga: labai geros būklės (naudotas), For sale, we offer a used incline belt conveyor. Z-belt conveyors are used across all industry sectors. Technical data: Manufacturer: Vanderlande Total width: 620 mm Belt width: 500 mm Length of upper section: 500 mm Length of inclined section: 3950 mm Cedpfxeix Nmzs Admorh Length of lower section: 1200 mm Top height H = 2280 mm Lower height from floor – 950 mm These conveyors are used but in very good condition. All offered conveyors are inspected in our company prior to sale. Please contact us to check availability. The price applies to the complete conveyor and its frame (see illustration). Any configuration possible. !! We offer large quantities of the proposed goods in various configurations !!!

Gamybos metai: 2016, Sąlyga: naudotas, Specifications: Condition: Fully operational, with signs of use Ideal for fast material transport Professionally dismantled and packaged Manufacturer: Unknown Year of manufacture: 2016 Model/Type: Belt conveyor Condition: Used Total length: 2,000 mm Total width incl. motor: 950 mm Total width excl. motor: 700 mm Belt width: 650 mm Belt type: Smooth Crsdpfxei Euufe Admjh Material: Steel/Aluminium/Stainless steel Frame height: 90 mm Including support legs Including SEW motor Including side guide Belt Conveyor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We will gladly provide you with a customised offer or advise you on layout or assembly questions. Simply share with us your requirements and local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies from a wide range of industries, such as logistics, pharmaceuticals, trades, or electronics. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or additional components such as order picking racks or containers.

Gamybos metai: 2017, Sąlyga: paruoštas naudoti (naudotas), Belt length: 2900 mm Belt width: 360 mm Belt speed continuously adjustable Crsdpjdzx E Uofx Admsh Drive motor Table height adjustable by: +/- 500 mm Required space: 2000 x 600 x 650/700 mm

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Inclined Conveyor with Curve and Straight Section GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good used condition. The belt conveyor is equipped with an SEW motor with a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the scope of delivery but are available as an optional extra upon request. The shown images of the conveyor system were taken while still installed in a logistics center. Technical Data: Conveyor length (NL): 6150 mm (incline 2310 mm + upper straight section 3840 mm) Frame width (NB): 650 mm Codpfxek Abaws Admjrh Belt width (GuB): 500 mm Overall height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Optional accessories: - Support stands - One-sided and double-sided side guide Prices excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please do not hesitate to contact us. Simply contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Sąlyga: paruoštas naudoti (naudotas), Juostinis konvejeris Kleemann Gamintojas: Kleemann. 2 vnt. sandėlyje: Cedpow Nu Uyefx Admjrh *1x A-A ilgis = 9000 mm. Juostos plotis: 800 mm. Pavara: 5,5 kW pavarų dėžė. *1x A-A ilgis = 6500 mm. Juostos plotis: 1200 mm. Pavara: 5,5 kW pavarų dėžė.

Sąlyga: naujas, Gamybos metai: 2025, Small I-, Z-, or L-shaped link belt conveyor, which transports the product from the vibrating feeder to the weighing unit. Open design, hygienic, water-resistant plastic conveyor. Specifications depend on the custom design and size. The machine/system is also available in other versions for different packaging sizes and packaging speeds. Credpfev Nmm Rox Admjh Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and let us know your packaging requirements. - Typically, 30-50 different new machines are always immediately available from stock. For custom-manufactured machines, we also offer very short delivery times starting at approximately 3 weeks. - All machines are available with a full warranty.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Inclined Conveyor with Curve and Straight Section GF 6105-650-500 RA1448 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for speed control. Side guides and/or photoelectric sensors can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are optionally available on request. The shown images of the conveyor system were taken in its still installed state in a logistics center. Crjdjk Aba Eepfx Admoh Technical data: - Conveyor length (NL): 6105 mm (inclined section 3180 mm + curve 500 mm + upper straight section 2425 mm) - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Build height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): adjustable up and down via frequency inverter - Drive: SEW gear motor S37 DT80N4/MM07/BW1 - Electrical data: 50 Hz, V380-500, kW 0.15 / 0.75 / S1 - Return roller (UR): Ø = 34 mm - Drive drum (AT): Ø = 81 mm - Belt: Type HSL 8 E - Year of manufacture: 2001 - Incline / decline: adjustable Optionally available: - Support legs - Side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional consultation, feel free to contact us. Please get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Sąlyga: paruoštas naudoti (naudotas), Juostinis konvejeris Metso Prekės ženklas: Metso A-A ilgis = 8000 mm. Juostos plotis: 1600 mm. Variklis: 5,5 kW. Cjdpfx Adewmifpomsrh 1 vnt. sandėlyje

Sąlyga: naudotas, Gamybos metai: 2008, Transnorm Curved Belt Conveyor 90°-800-700 IR900 right Crjdpsn Tpvgjfx Admsh RA2080 Technical Data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inside radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical specifications: 380–500 V, 0.37 kW Conveying speed: 1st: 0.67 m/s, 2nd: 0.25 m/s, 1st: 0.33 m/s, or 1st: 0.83 m/s Scope of delivery: without supports (supports available on request) Optional: Supports Side guides Frequency converter for stepless speed adjustment Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Sąlyga: paruoštas naudoti (naudotas), Juostinis konvejeris LKOREMAN Prekės ženklas: LKOREMAN Crsdpfx Adsvrrwmjmeh Juostos plotis: 500 mm *A-A ilgis = 6000 mm Galia: Pavarų dėžė 2 kW Sandėlyje: 1 vnt. *A-A ilgis = 10000 mm Galia: Būgninis variklis 1,1 kW Sandėlyje: 1 vnt.

Sąlyga: naudotas, Gamybos metai: 2015, Transnorm Belt Curve Conveyor Belt Curve 90°-800-700 IR900 Left RA2116 Technical Data: Crsdpsq Uap Rjfx Admjh Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Frame height (BH): 210 mm Motor mount height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical data: 380-500 V, 0.37 kW Conveying speed: 0.67 m/s Scope of delivery: without supports (please enquire if needed) Options: - Supports - Side guides - Frequency inverter for variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Sąlyga: paruoštas naudoti (naudotas), Hazemag juostinis transporteris Gamintojas: Hazemag Sandėlyje 7 vnt.: * A-A ilgis: 5.000 mm, juostos plotis: 600 mm, pavara: 3 kW. Crsdpfexfd A Rox Admsh * A-A ilgis: 3.000 mm, juostos plotis: 800 mm, pavara: 3 kW. * A-A ilgis: 5.000 mm, juostos plotis: 1000 mm, pavara: 7,5 kW. * A-A ilgis: 2.300 mm, juostos plotis: 700 mm, pavara: 3 kW. * A-A ilgis: 5.800 mm, juostos plotis: 800 mm, pavara: 3 kW. * A-A ilgis: 3.500 mm, juostos plotis: 650 mm, pavara: 5,5 kW. * A-A ilgis: 5.000 mm, juostos plotis: 1000 mm, pavara: 5,5 kW.

Sąlyga: naudotas, Gamybos metai: 1999, Transnorm Belt Conveyor 800-600-500 RA1986 The Transnorm belt conveyor is from 1999 and is in good (used) condition. It is perfectly suited as a feeder belt and is equipped with a motor from Van der Graaf. Support stands are not included in the scope of delivery but are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 Belt Conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional Conveyor length (FL): 800 mm Nominal/outer width (NB): 600 mm Belt width (GB): 500 mm Overall height (BH): 80 mm Motor height (MH): 545 mm Motor type: Van der Graaf Drum Motor TM 113 B25-434 Z Motor power: 0.55 kW 230/400 V 50Hz Conveying speed: 2.8 m/s Weight: 60 kg Crodpfek Abqusx Admsh Delivery scope: without support stands (please enquire if needed) Optional: Support stands We can also extend the conveyor to your required length if necessary. Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, please contact us directly. Simply call or email us. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Sąlyga: paruoštas naudoti (naudotas), Juostinis transporteris Hazemag Prekės ženklas: Hazemag 5 vnt. sandėlyje: Credpfexdvwwjx Admsh *3x A-A ilgis: 12 000 mm, juostos plotis: 650 mm, pavara: 5,5 kW elektros variklis. *1x A-A ilgis: 9 000 mm, juostos plotis: 650 mm, pavara: 5,5 kW elektros variklis. *1x A-A ilgis: 13 000 mm, juostos plotis: 1000 mm, pavara: 7,5 kW elektros variklis.

Sąlyga: naudotas, Gamybos metai: 1999, Transnorm Belt Conveyor 1200-600-500 RA1987 The Transnorm belt conveyor was manufactured in 1999 and is in good used condition. It is ideally suited as a feed conveyor and is equipped with a Van der Graaf brand motor. Please note that supports are not included in the delivery scope, but are available as an optional extra. Crjdpfx Aek Abqxsdmeh Technical Data: Manufacturer: Transnorm Model: TS 1100 Belt Conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional Conveyor length (FL): 1200 mm Nominal/outer width (NB): 600 mm Belt width (GB): 500 mm Frame height (BH): 80 mm Motor height (MH): 545 mm Motor type: SEW geared motor Motor power: 0.55 kW 230/400 V 50Hz Conveying speed: 1.6 m/s Weight: 60 kg Scope of delivery: without supports (please inquire separately if needed) Optional: Supports We can also extend the conveyor to your required dimensions on request. Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 2017, Transnorm Belt Curve Conveyor 45° Left 670-500 IR1100 RA1083 The Transnorm belt curve is from 2017. It is in as-new (used) condition and fully operational. It is equipped with a SEW brand motor. Supports are not included but are available optionally upon request. Belt curves are commonly used in intralogistics for the in-house transportation of unit loads and have become essential in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered drums and a specially developed belt guide system ensure maximum smooth operation. Technical Specifications: Manufacturer: Transnorm Crsdpfx Ask Aa Dtsdmjh Model: TS 1600-105 FH2 Belt Curve 45° Left Year of Manufacture: 2017 Condition: As-new (used) Motor: Fully functional Angle: 45° Conveying Direction: Left Inner Radius (IR): 1100 mm Nominal/Outer Width (NB): 670 mm Usable Width (NUB): 500 mm Side Guide: External sheet steel Drive: SEW geared motor Drive Position: External, pull Weight: 120 kg Included: Without supports (supports available optionally on request) Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, please contact us. Simply phone or email us. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Sąlyga: naujas, Gamybos metai: 2020, Transnorm Belt Conveyor Folding Flap Diverter 3000x1120x1000 RA2286 Technical Data: Conveyor length (NL): 3000 mm Belt body width (NB): 1120 mm Belt width (GuB): 1000 mm Installation/transfer height (BH): 1050 mm with 100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Overall dimensions: 3000x1300 mm Tilting height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s / 1.2 s Drive: Nord geared motor Electrical Data: Conveyor belt motor: 50Hz V380-500, 1.5 kW / S1 Tilting motor: 50Hz V220/400, 3.0 kW / S1 Return pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of manufacture: 2020 Optionally available: Frequency inverter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Crsdpfotp Tvwex Admjh Contact us by phone or email. We are happy to assist you with the planning and realization of your projects. We look forward to hearing from you. With kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2001, Lippert Belt Conveyor Incline/Decline Conveyor GF 7000-650-500 RA1480 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric sensors can be installed upon request at additional cost. Support legs are not included in the standard delivery but are available as optional accessories on request. The images shown of the conveyor system were taken while the unit was still installed in a logistics center. Technical specifications: Conveyor length (NL): 7000 mm (upper straight section 1000mm + curve 500mm + inclined section 5500mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Installation height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down using frequency inverter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return pulley (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Optional accessories: Support legs Single-sided or double-sided side guides Credpfx Adek Abckomsh All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional consultation, please do not hesitate to contact us. Just give us a call or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2012, Transnorm Belt Curve Conveyor, right-hand 90°-885-700-IR400 RA1830 The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curve conveyors are frequently used in intralogistics for the in-house transport of unit goods and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are easily managed. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical Data: Model: Belt curve conveyor Conveying length (middle radius, NL): 1178 mm Frame width (NB): 885 mm Belt width (GuB): 700 mm Motor height (MH): 370 mm Overall height (BH): 170 mm Inner radius (IR): 400 mm Conveying angle: 90° Conveying speed (v m/s): 0.217 m/s Drive: SEW geared motor Electrical data: 50Hz V230/400, kW 0.25 /S1 Belt: (wear condition as seen in images) Year of manufacture: 2012 Optionally available: Support stands Single-sided and double-sided side guides Frequency converter Codpfxoqy Sgce Admorh Prices are net, plus VAT, ex central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional advice, please contact us. Reach out via phone or email. We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Sąlyga: naudotas, Gamybos metai: 2014, Transnorm Inclined Belt Conveyor with Decline, Incline Conveyor with Curve and Pre-run GF 6000+800-900-800 RA2181 Technical Data: Conveyor length (NL): 6800 mm (6000 mm inclined belt + 800 mm curve) Frame width (NB): 700 mm, 800 mm with motor Belt width (GuB): 600 mm Height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Support legs: optionally available Conveying speed (v m/s): 0.42 Drive: SEW geared motor, R27 DRS71M4BE1/MM07/LN Electrical specifications: 50Hz V380-500, kW 0.75 S1 Crsdoq H T Rnjpfx Admoh Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optional extras: • Supports • Side guides, one-sided or double-sided • Freely adjustable conveying speed via frequency converter • Customisable length (longer/shorter) All prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a tailored, professional consultation, please feel free to contact us. Just give us a call or send an email. We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and point of contact for intralogistics

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2009, Transnorm Belt Conveyor Belt Band Folding Belt Smart Sort GF 1450-800-700 RA2037 Cedpfxstg Dhfj Admorh Technical Data: Conveyor length (NL): 1450 mm Frame width (NB): 800 mm, 150 mm with motor Belt width (GuB): 700 mm Height (BH)/Transfer height: 800 mm Conveying speed (v m/s): 1.47 Drive: SEW geared motors, with brake for angle adjustment Electrical data: 50Hz V380-500, 0.37 kW band drive and 2.2 kW angle drive Lower sorting height: 500 mm Upper sorting height: 1200 mm Angle adjustment speed: 1s from minimum to maximum Year of manufacture: 2009 Special features / Accessories: 4x proximity sensors for angle determination Available as options: Side guide single-sided and double-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Sąlyga: naudotas, Gamybos metai: 1992, Transnorm Belt Curve Conveyor, Curve 30°-800-700 IR900 Right RA2256 Technical Data: Manufacturer: Transnorm Condition: good (used) Crjdpfx Adjrrxc Demsh Conveyor angle: 30° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA42 DT71D-4 Electrical data: 380-500 V, 0.37 kW Conveying speed: please contact us Scope of delivery: without supports (please enquire if needed) Optional: supports Side guides Frequency inverter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.