Linhai 500 pirkti naudotą (39 009)

Sąlyga: naudotas, Clamping table, angle plate, T-slot table, rotary table, milling machine table -Angle plate: for workpiece clamping Isdpfxoink S Ns Acuoih -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -T-slots: 175 x 30 mm -Bores: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, SIEMENS 828D control with Shopturn, 17-inch touch screen Swing diameter over bed: 550 mm Maximum machining length: 428 mm Maximum machining diameter: 300 mm Spindle bore: 62 mm Bar machining: 51 mm Spindle nose: A2-6 Spindle speed range: 35 – 5,000 rpm motor spindle X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer with driven tools: 12 stations Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: 25 x 25 mm Max. speed of driven tools: 5,000 rpm Max. power of driven tools: 5 kW Max. milling capacity with end mill: 16 mm Max. milling capacity with shell mill: 50 mm Max. drilling capacity: 16 mm Max. thread cutting capacity: M16x2 Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: optional programmable tailstock Quill taper: Morse taper 4 Tailstock travel including quill travel: 565 mm Hydraulic unit tank capacity: 20 liters Hydraulic unit pump power: 1.5 kW Hydraulic unit nominal pressure: 3.5 – 6 MPa Central lubrication tank capacity: 2 liters Central lubrication output: 25 W Coolant tank capacity: 130 liters Coolant pump power: 25 W Continuous motor power: 11 kW 400 Volt 50 Hz Short-term motor power (30 min): 15 kW 400 Volt 50 Hz Weight: 4,000 kg Dimensions: 2,600 x 1,685 x 1,768 mm Iiedpfx Ajwbu T Uscuoh Equipment, Accessories Coolant system, tool changer for 12 driven tools, 200 mm hydraulic chuck, linear guideways and ball screws from THK/Japan, Siemens 828D control, spindle cooling, chip conveyor, workpiece measurement, automatic tool length compensation, bar feeder, air blow-out function for tool changer and chuck, spindle, high-pressure cooling, oil separator, workpiece extraction device.

Sąlyga: paruoštas naudoti (naudotas), Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter: 525 mm Maximum disc ring width: 175 mm Maximum workpiece dimension: 170 mm Working disc speed: 45/70/90/140 rpm Main drive power: 4.0 kW Ijdpfx Acoh Invrsueih Connection: 400V/50Hz Emergency stop switch Conventional control with operator panel Fully-featured lapping machine, conventional control

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 7 562 h, tekėjimo ilgis: 515 mm, tekėjimo skersmuo: 366 mm, X ašies eiga: 260 mm, Z ašies eigos atstumas: 590 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras aukštis: 2 120 mm, bendras ilgis: 2 705 mm, bendras plotis: 2 000 mm, bendras svoris: 5 500 kg, CNC Control: Mitsubishi M-720BM (MAPPS 2) Capabilities Travel range X-axis mm: 260 Travel range Z-axis mm: 590 Travel range B-axis mm: 624 Turning length mm: 515 Max. turning diameter mm: ø 366 Swing over bed mm: ø 923.8 Swing over cross slide mm: 755 Bar working capacity mm: 52 Upper Turret: Number of tool stations: 16 Max. speed of driven tools rpm: 6,000 Driven tools power kW: 5.5/5.5/3.7 (3min/5min/cont) Driven tools indexing time sec: 0.25 Main Spindle: Max. spindle speed rpm: 6,000 Spindle drive power kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Sub Spindle: Max. spindle speed rpm: 6,000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow chuck (6") Manufacturer: KITAGAWA Cooling System: Iijdpfx Aou T H Dxecueh Tank capacity liters: 235 Equipment: Chip conveyor Signal lamp High-pressure pump Dual foot switch for main and sub spindle Interface for bar loader Bar loader IEMCA MASTER 880/MP 33 LL Machine Run Time: Nominal power requirement kVA: 27.4 Base Machine: Dimensions/Weight Length mm: 2,705 Width mm: 2,000 Height mm: 2,120 Weight kg: 5,500

Sąlyga: naudotas, Gamybos metai: 1990, Pjovimo skersmuo 500 mm Pjovimo ilgis 5000 mm Pjūklo disko skersmuo 420 - 500 mm Matmenys apie 6400 x 1500 x 1600 mm Svoris apie 1600 kg Iiodpev U Dluefx Acujh Be pakopų padavimas Yra naudojimo instrukcija ir atsarginių dalių sąrašas Pneumatinis padavimas, tolygiai reguliuojamas Ilgio reguliavimas varikliu su skaitmeniniu ekranu

Gamybos metai: 2005, Sąlyga: naudotas,

Sąlyga: naudotas, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet - Width: 1000 mm - Depth: 500 mm - Height: 1000 mm - Shelves: 1 - with doors - Weight: 86 kg Iodped Ebp Eofx Acujih

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Cambio 500 debarking plant consisting of: Infeed centering system. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Discharge control unit. Tilting trough for long timber. Isdpowxdimsfx Acujih Spare parts.

Sąlyga: naudotas,

Sąlyga: naudotas, Knife: Z4 - 125 x 130 x 35 mm, - Strip planer knife. Ijdpfxelf I Rvo Acueih

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edge banding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) – mm 1200 LED setup assistance for vacuum suction cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 140 m³/h) Safety enclosure for the working head, safety tread mats Chip conveyor No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing unit (hot-melt adhesive) VT 50 Edge magazine for rolls (6 compartments) OPTIONS: No. 1 saw adapter unit, 90 degrees fixed, max. diameter 200 mm Iiedpofbmqtjfx Acush No. 1 adapter unit for flush trimming and profile scraper No. 1 horizontal drilling and milling head adapter unit (cross head) with 4 horizontal spindles

Sąlyga: naudotas, Gamybos metai: 2007, Swing over bed: 923.8 mm Swing diameter over cross slide: 755 mm Max. turning diameter: 356 mm Max. turning length: 515 mm Control: MSX-850 III Travel X-axis: 260 mm Travel Y-axis: -50, +50 mm Travel Z-axis: 590 mm Travel B-axis (spindle 2): 624 mm Driven tool speed: 6,000 rpm CNC turning and milling center | MORI SEIKI NL1500SY / 500 with main and sub spindle, B and Y axis, turret prepared for driven tools, chip conveyor, and loading/unloading system (alphaMAX). The machine has only 3,400 hours of machining time. The machine is in well-maintained condition. Please refer to the offer for further technical details. ----- Iodjvwgkrjpfx Acujih #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Sąlyga: naudotas, Clamping plate, marking / layout plate, inspection plate, measuring table, welding table, straightening plate - Surface: very good Ijdpfxocpkk Rj Acuoih - Width: 500 mm - Length: 800 mm - Height: 180 mm - Plate thickness: 25 mm - with support ribs - Weight: 90 kg

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Control: SIEMENS Swing diameter over bed: 350 mm Turning diameter: 180 mm Centre distance: 500 mm Iijdpfx Aolawakjcujh Spindle speed: 4,000 rpm Tailstock Multifix quick-change toolpost Accessories

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL201IJ3007, MORI SEIKI NL2000/500 CNC TEKINIMO CENTRAS METAI: 2005, 2006, 2009 MSX-850 VALDYMO SISTEMA KOLIETINIS GRIEBTUVAS VARIKLINIAI ĮRANKIAI 4 AŠYS SKIEDRŲ PADĖKLAS 16 ĮRANKIŲ BŪGNAS GALINĖ ATRAMA (UODEGINĖ DALIS) DETALIŲ GAUDYKLĖ ĮRANKIO NUSTATYMO ZONDAS Iedpswxw Ivefx Acusih MAKS. VELENO APSUKOS: 6000 RPM MAKS. TEKINIMO SKERSMUO: 356 MM X EIGA: 260 MM Y EIGA: 100 (+-50) MM Z EIGA: 590 MM C AŠIES JUDEJIMAS: 0,001 STRYPIO TALPA: 65 MM STAKLĖS SU PLASTIKO IŠTRAUKIMO BAKU STAKLĖS DAUGIAUSIA NAUDOTOS PLASTIKO APDIRBIMUI, BŪKLĖ PUIKI AČIŪ UŽ SUSIDOMĖJIMĄ STAKLIŲ MATMENYS: - Ilgis: 2 705 mm - Plotis: 2 000 mm - Aukštis: 2 120 mm - Svoris: 5 800 kg

Sąlyga: naudotas, Blades: Z2(4) Iedslf I Rrjpfx Acujih - 100 x 130 x 35 mm, - strip planer blades.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Comprehensively overhauled cylindrical grinding machine for external and internal grinding, LŽT Kikinda, model AFB 300/500 and UFB 300/500 Machine specifications: • Center height: 135 mm • Distance between centers: 300/500 mm • Workpiece through diameter: 270 mm • Grinding length: 300/500 mm • Maximum workpiece weight: 10 kg • Maximum grinding diameter: 100 mm • Machine accuracy over 300/500 mm length: within 5 microns • Support repeatability: up to 5 microns • Electrical components by ABB, Schneider • Final painting according to customer preference Iiodpsv Tav Tjfx Acueh Workmanship warranty: 6 months Delivery time: as agreed For more information, please call.

Sąlyga: naudotas, Gamybos metai: 2010, Faceplate diameter 500 mm Iedpfxovylgwe Acujih Total power requirement 1 kW Machine weight approx. 1 t Space requirement approx. 1 m

Sąlyga: naudotas, Tiered trolley, transport trolley, shelving trolley, sorting trolley, order picking trolley, mobile shelf, tray trolley, stick trolley Ijdpfxsrri Ske Acueih - Transport trolley: picking trolley, tiered trolley - Tiers: 2 trays arranged at an incline - Tray dimensions: see photos - Running gear: 4 swivel castors - Overall dimensions: 810/500/H1645 mm - Weight: 63 kg

Sąlyga: naudotas, Clamping plate, clamping table, clamping cube, press table Iiedpeu N Siuefx Acueh -Clamping table: Clamping plate for hydraulic press/excenter press -Clamping surface: 500 x 280 mm -Dimensions: see technical drawing in photo -Overall dimensions: 500/280/H180 mm -Weight: 53 kg

Sąlyga: geras (naudotas), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet - Tool cabinet: steel cabinet with drawer and intermediate shelf - Width: 500 mm - Depth: 500 mm - Height: 1010 mm - Door: lockable Iiodownbmujpfx Acuoh - Weight: 30 kg

Sąlyga: geras (naudotas), Clamping plate with T-slots, plate field, welding table, pallet changer - Origin: from a CNC machining center MAHO Type MC 600 - Width: 500 mm - Length: 500 mm - Height: 180 mm Iiedpfx Acjb A Hy Usujh - With support ribs - Slot width: 14 mm - Quantity: 1 table available - Price: per piece - Weight: 200 kg/piece

Gamybos metai: 1982, Sąlyga: geras (naudotas), Clamping plate with T-slots and cross table, plate field, welding table, plate-type boring mill, T-slot plate, pallet changer -T-slot plate sourced from a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm Iedpfx Acofhtp Seueih -Plate: solid construction -T-slot width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

Sąlyga: geras (naudotas), Clamping plate with T-slots and cross table, plate field, welding table, plate boring mill, T-slot plate, pallet changer - T-slot plate: Clamping plate 500 x 500 mm Iiodpfx Acsg D Rmfjush - Inner diameter: 180 mm - Plate height: 75 mm - Slot width: 18 mm - Slot pitch: 280 mm - Dimensions: see drawing in the photos - Overall dimensions: 500/500/H75 mm - Weight: 128 kg

Gamybos metai: 1982, Sąlyga: geras (naudotas), Clamping plate with T-slots and cross table, plate field, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: solid construction -Slot width: 12 mm -Dimensions: see technical drawing in photo -Quantity: 21 clamping plates available -Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece Iijdpfx Ashubczecush