Lango Kampas pirkti naudotą (3 560)

Gamybos metai: 2023, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vežimėlis langų, stiklo ir baldinių plokščių vežimui, „L“ tipo, matmenys: plotis 100 cm, aukštis 195 cm, ilgis 200 cm. Fsdpfx Aey Svykofdeph

Būklė: naudotas, Gamybos metai: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Features: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed drive 0.25 kW; approx. 1250 mm long; feed speed approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue supply from below and rapid heat-up time after machine standstill - Flush-cutting unit for front and rear workpiece edges, automatic tracing on the workpiece, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical tracing and horizontal guide; reproducible adjustment via digital counters; 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm; cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter in sync with the belt feed - Continuous workpiece support approx. 1800 mm long, support rail extendable by approx. 300 mm - Rotatable film reel Ø 800 mm Technical details: Fpjdpfozc Agkex Afdsh - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Heating power glue pot: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film reel Ø 800 mm) - Net weight: approx. 260 kg Availability: short notice Storage location: Flörsheim

Gamybos metai: 2019, būklė: naudotas, Naudotas transportavimo rėmas MMW LIMITED Modelis ST2201-5-3 Fjdpfxoy Nkkls Afdjph Maks. 5400 kg „A“ formos rėmas langams MMW Ltd ST2201-5-3, didžiausia naudingoji apkrova 5300 kg

Būklė: nepatikrintas (naudotas), Gamybos metai: 2020, Max. workpiece length 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control: CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center For sale on behalf of client ----- - From a wooden window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, full text in PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm passage height (from console level), depending on clamping system—see layout. Travel distances: X = 4,930 mm Fsdpfxjyq Szts Afdsph Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking mechanism - Drilling head DH 18 6H1S: vertical drilling unit with 12 spindles (7 spindles in X-direction, 5 in Y-direction, grooving saw in X-direction) Horizontal drilling unit with 6 spindles, 4 in X, 2 in Y. 1 grooving saw in X-direction, max. diameter 120 mm - Disk tool changer with 24 tool positions, mounted on right side of machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Change station for circular saw blade, mounted on gantry/tool changer Max. saw blade diameter 350 mm - Tool changer on the left in the machine frame with 10 tool positions Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disk tool changer with 24 positions, mounted on gantry, traversing in X-direction Max. tool diameter 240 mm Max. tool height 370 mm - Traversing pick-up position for chip deflector shield - 6 workpiece supports, s-motion position-controlled - 2 working zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor - Line laser for segment arch processing - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety equipment - Software "WoodFLash" Lamello Clamex P Macro Notch Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-listed machine on request! ----- Option: New Oppold Tool Set for H500: - Windows Timber windows IV 68, 78 and 88, inward-opening, with interchangeable rebate (side, top). Glazing rebate 20 mm, frame and sash profile 20° bevel With loose and pre-milled glazing bead Old-building timber windows IV 68, 78 and 88, inward-opening, no rain rail, with interchangeable rebate (side, top and bottom). Glazing rebate 20 mm, frame and sash profile 15° bevel With fitted weather bar Timber-aluminium windows (system provider: Gutmann Mira, bevelled rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and bevelled, interchangeable rebate bottom, side + top - Entrance doors Timber HTIV 68, 78 and 88 with single rebate in frame and double rebate in sash Inward opening, 1 sash variant, glazing rebate, without interchangeable rebate Offset profile Timber-aluminium IV 68, 78 and 88 with single rebate in frame and double rebate in sash - Lift-slide doors Timber HS IV 68, 78 and 88, without frame processing Timber-aluminium HS IV 68, 78 and 88, without frame processing Execution...

Būklė: paruoštas naudoti (naudotas), Slotted spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be fully inspected at our facility in Oberkochen prior to delivery! Technical Data Overview (For any additionally included accessories, please enquire) Pos. 1: Crosscut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm Fjdpextvgkjfx Afdjph > Motor power: 3.0 kW > Laser alignment light for cut section identification CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and slotting spindle ----- > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool rotation diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb & counter-rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool rotation diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool rotation diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for processing narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool rotation diameter: 130 mm > Axial adjustment range: 52 mm, indexed to 2 positions > Radial adjustment range: 125 mm, indexed to 2 positions Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 90 mm, indexed to 3 positions > Radial adjustment range: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool rotation diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electrically adjustable feed height incl. mechanical digital display and manual feed bar clamp > Rebating device for splinter-free rebate cutting > Twin part package > Return feed system for single-operator control: swing belt > Screen control > Inclined window setup > Electronic angle display for inclined windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Slotting spindle: 140 mm Profiling spindle 1...

Būklė: naujas, Finiture dažymo linija langams ir durims ----- Trumpas aprašymas: Poz. 1: 1x dvigubų bėgių pakabinamas transporteris Poz. 2: 1x traversų pasukimo grupė su vienu mova Poz. 3: 1x "Superjet" mirkymo sistema Poz. 4: 1x aukšto slėgio drėkintuvas Poz. 5: 1x nuotekų atskyrimo įrenginys Fpodsy D A Hhepfx Afdeh Pasirinktinai: Mirkymo kanalas arba vonia (5-6 vonios) Išsami techninė informacija ir išdėstymas – žr. PDF priedą! ----- Nurodytos dažymo linijos kaina – pagal užklausą! ----- (techniniai duomenys pagal gamintoją – be garantijos!) Visos kainos nurodytos be PVM. Taikomas įstatymais nustatytas PVM.

Būklė: naujas, Rankinis įrenginys, Taip/Ne Automatinis pavienėms juostoms Taip Taip/Ne Automatinis rėmams Taip Taip/Ne RUCHSER langų gamybos mašinos Sąsagėlių tvirtinimas medžio-aliuminio langams pravažiuojančioje linijoje ir ant varčios atmušimo stalo. Žemiau pateikti vaizdo įrašai rodo: 1. Sąsagėlių tvirtinimo automatas sumontuotas ant varčios atmušimo stalo 2. Sąsagėlių tvirtinimas suspaustame rėme pravažiuojančioje linijoje 3. Sąsagėlių tvirtinimas pavieniui pravažiuojančioje linijoje Prospektą su aprašymu rasite pridedamame PDF dokumente. Kainos pagal užklausimą! Fodpfx Afoytx T Uedsph (Techniniai duomenys pagal gamintoją – be garantijos!)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 31 695 h, Funkcionalumas: visiškai funkcionalus, valdiklių gamintojas: Siemens, valdiklio modelis: Sinumerik 840D SolutionLine mit CELOS, bendras svoris: 7 050 kg, veleno greitis (maks.): 15 000 aps./min, veleno veikimo valandos: 11 806 h, veleno nosis: SK40, ašies skaičius: 1, Įranga: drožlių transporteris, DMG MORI DMU 50 3rd Generation with LANG RoboTrex Automation For sale is a highly automated 5-axis machining center DMG MORI DMU 50 3rd Generation, including LANG RoboTrex robotic automation and 134 LANG MakroGrip vices. The system is currently in production and can be inspected and demonstrated under power. Thanks to its extensive automation, the machine is ideal for unmanned shifts, series production, and highly productive single-part and small batch manufacturing. Special highlights include the main spindle replaced in 2025 with DMG MORI warranty and the integrated tool breakage monitoring system. Technical Specifications Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2017 Machine no.: 14505758134 Control: Siemens Sinumerik 840D SolutionLine with CELOS Spindle speed: 15,000 rpm Tool holder: SK40 Machine weight: approx. 7,050 kg Operating hours: approx. 31,695 h Spindle hours: approx. 11,806 h Machine Equipment • 5-axis simultaneous machining • Swiveling rotary table • Siemens 840D SolutionLine with CELOS • Renishaw measuring probe • Tool breakage monitoring • IKZ (internal coolant supply) • Chip conveyor • Mist extraction unit Fsdpezb H Ucofx Afdeph • Electronic handwheel • Automatic door actuation for robotic operation • New DMG MORI Master spindle from 2025 with 18 months warranty, unlimited spindle hours Automation Manufacturer: LANG Technik Model: RoboTrex Year of manufacture: 10/2021 Serial number: 60083-20 Automation Equipment • FANUC industrial robot • Fully automated loading and unloading • Workpiece handling for unmanned production • Touch operation panel • Safety cell with protective enclosure • Automatic communication with DMG MORI machine Clamping Technology Included • 134 LANG MakroGrip vices • Extensive workpiece carriers and automation pallets • Ready for immediate use in automated operation Maintenance / Condition In March 2025, a fully renewed master spindle including rotor was installed by DMG MORI. The investment, including spare parts and service, was well over €40,000 net. The machine has been regularly maintained and is in production-ready condition. Ideal for • Automated series production • Medical technology • Aerospace • Tool and mold making • Precision engineering • Contract manufacturers with unmanned night shifts Inspection The system is in ongoing operation and can be inspected under power by appointment. Sale ex location Leipzig.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, max. workpiece length 4,400 mm Milling spindle: 1 unit Main motor: 19.2 kW Control system: Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specifically designed for efficient and flexible production of wooden windows and doors. HIGHLIGHTS: - Various tool magazines for optimal tool setup - Simultaneous loading of 4 workpieces Fjdsyyqm Ujpfx Afdoph - Patented clamping system for optimum processing results - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for quick changing between exterior and interior profiling - INTEGRATED window manufacturing software, i.e., the machine does not require (but can, if desired) external industry software to be controlled from the office - Powerful 19.2 kW HSK-63 E motor Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Short-term delivery of tools available on request! Request a quote and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will find the technical description of the machine as a PDF document attached. We would also be happy to accept your used machine as a trade-in at a fair price! Matching stationary or mobile extraction systems available on request! (e.g., #5674 NESTRO NE 300) Suitable compressor available on request! (#5997 Kaeser Aircenter SM 15) (Technical data as per manufacturer – subject to change and without liability!)

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Slotted spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control: Weinig PC-Nexus Weinig Uncontrol 12 With radial and axial NC spindles as well as VARIO table ..... The machine has been professionally dismantled and stored in 73447 Oberkochen. Technical Data Summary (Please enquire separately about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronically/electrically, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000–6000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial traverse: 150 mm NC axis, stepless electronic adjustment Fpodpfx Afoyrtzkodeh > Radial traverse: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Axial traverse combined with cross-cut saw Electronic length stop ..... > Length: 4500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered Transfer conveyor ..... For transferring the components into the longitudinal machining area, including double workpiece separation before the entry to the longitudinal machining section. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 3rd profiling/milling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial traverse: 30 mm NC axis, stepless > Radial traverse: 125 mm NC axis, stepless > Spindle speed ...

Būklė: nepatikrintas (naudotas), Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing Fpjdpfx Aex H Al Nofdjh > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet Fedpfxexpi Due Afdjph PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Būklė: paruoštas naudoti (naudotas), Slotting spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot mortising machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead cutting saw. Price: €4,000 3) Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 Timber window tool set IV 68/78/88 and timber-aluminium window tool set IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7,000 (Hardware conversion available at extra cost on request!) ----- Technical description by manufacturer: - Haberkorn FZS1 slot mortising machine with automatic feed, -Infinitely variable height adjustment D 40 mm Cross-cut saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal positioning: pneumatic, manually adjustable -Safety guard and extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Usable length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screw spindles -Safety guard and extraction hood with extraction port diameter: 180 mm -Automatic brake with speed monitoring Tilting table: -Swivel range: +/- 65 degrees -Automatically changing counter-block (programmable) -Pneumatic clamp -Highly accurate electronic angle indicator -Automatic length compensation -Counter-block always remains in the cutting plane for any angle setting Special equipment: -Laser for workpiece positioning -Saw position pneumatic -Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with lift spindle, 3 tools -Extraction connection port 2 x 120 mm -Spindle length: 270 mm -Opposing fence with fine adjustment and turret head -Triple stroke, max. working height: 90 mm -Glazing bead separation saw with safety and extraction hood, diameter 80 mm -8-roller feed unit with stand and hold-down arm, required for set up with glazing bead separation saw -Pneumatically-actuated insertion device for edge gears, speed 6000 rpm -2 x 3 kW motors -Spindle mounting diameter: 30 mm ----- 3) Oertli tooling for the Haberkorn and Okoma machines -1 set timber windows IV 68/78/88 -1 set timber-aluminium windows IV 68/78 Tools are sold in the condition, scope, and with the accessories as available in our warehouse. Note regarding window profiles, tool drawings, and tool system lists: Fa. Engelfried assumes no warranty that the tools actually supplied correspond with the systems listed or illustrated. ----- 4) Götzinger OBM Plus corner hinge and olive drilling machine -Corner and scissor hinge + handle drilling -Drilling unit vertical with: -Quick-change clamping device for drill heads -Pneumatic feed with foot switch Fjdpfx Afsxa Hi Nodoph -1x olive drilling head 24 mm -1x corner hinge double head -Maco MultiMatic hardware -1x adjustable folding stop, left, with 6 stops -1x adjustable folding stop, right, with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Fedpfxjvu Hfqj Afdsph Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: naudotas, Technical details: Width: 655 mm Depth: 500 mm Height: 500 mm Machine weight approx.: 197 kg Dimensions L-W-H: 420 x 655 x 500 mm Design: Angle frame with double reinforcement Vertical plate: - Size: W:655 x H:500 x Thickness: 40 mm - with clamping holes, elongated slots, and center bore Fodeu N D Snjpfx Afdeph Base plate: - Size: W:655 x L:420 x Thickness: 40 mm - with elongated slots

Būklė: naudotas, Technical details: Width: 700 mm Fodpfxeu N Eats Afdoph Depth: 600 mm Height: 910 mm Machine weight approx.: 440 kg Dimensions L-D-H: D: 600 x W: 700 x H: 910 mm Steel plate welded, 80 mm thick, with reinforcement Surface milled Clamping surface vertical: 6x T-slots according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; spacing 140mm Base mounting surface: L: 600 mm x W: 700 mm, 7x clamping holes

Būklė: naudotas, Techninės detalės: Plotis: 905 mm Gylis: 1200 mm Aukštis: 2600 mm Mašinos svoris: apie 4,0 t per kampą Parduodami du tokie pritaikymo kampai. Medžiaga – plienas, paviršius apdirbtas T-griovelis pagal DIN 650: Fpsdpfxoval Nrj Afdsh a=22; h=36; b=39; c=17,5 mm, atstumas tarp T-griovelių centrų = 250 mm Pritvirtinimas prie pagrindo keturiomis pailgomis skylėmis Ø 21 x 30 mm Šoninėse sienose (kairėje ir dešinėje) po 4 M24 skylutes

Būklė: naudotas, Technical details: Width: 400 mm Depth: 335 mm Height: 500 mm Fsdpfxou S Hywo Afdjph Machine weight approx.: 100 kg T-slot according to DIN 650: T-slot width a = 22 mm; h = 39.5 mm; b = 40 mm; c = 17.5 mm, T-slot spacing 125 mm

Būklė: naudotas, Technical details: Table length: 400 mm Table width: 225 mm Width: 400 mm Fpjdjwb D H Djpfx Afdeh Depth: 225 mm Height: 300 mm Dimensions (L x W x H): 400 x 225 x 300 mm Weight: approx. 34 kg per angle 2 pieces available (price per unit) with elongated holes Material: cast steel Surface: planed

Būklė: naudotas, Gamybos metai: 1994, Technical Details: Compressed Air Requirement: 8 bar Total Power Consumption: 14 kW Approx. Machine Weight: 80–170 kg per machine MULTIFUNCTIONAL PUNCHING AND DRILLING AUTOMATON, ideally suited for ALU window construction. 3 units: - for Schüco aluminum window frame, mullion and transom profiles S65 - for Schüco aluminum window sash profiles, system ROYAL S 55, S 65, and S 70 - for Schüco aluminum door profiles, Royal S65 door base profiles - Foot pedal operation - Compressed air gun A N D DRILLING AUTOMATON Application: - Drilling automaton for door hinges - Drill holders: for 8 units; intended for 6 countersink drills with Ø = 11/15 mm, approx. 80 mm long - Tool clamping is foot-operated, drilling is manual Fjdpfx Aju Icyhofdjph - Accessories: various attachments.

Būklė: naudotas, Techninės detalės: Plotis: 1270 mm Gylis: 1000 mm Fpjdju N Ea Hopfx Afdoh Aukštis: 1600 mm Yra 3 vnt. prispaudimo kampainių T-slotas pagal DIN 650: a=35 mm; b=60 mm; c=27 mm; h=65 mm Kaina už vieną kampainį

Būklė: naudotas, Technical details: Width: 200 mm Depth: 300 mm Height: 500 mm Machine weight approx.: 38 kg per bracket Fpodpfx Afou N Ec Uodeh 2 units available (price per unit) *

Būklė: naudotas, Techniniai duomenys: Stalo montavimo paviršius: 330 x 310 mm lygintas Mašinos svoris apie: 25 kg Matmenys (I x P x A): 430 x 400 x 420 mm Naudojimas: mašinos stalas Reguliuojamas montavimo kampas su 3 T-formos grioveliais pagal DIN 650: a=17; H027; b=32; c=14 mm, atstumas 100 mm Pasvirimo kampas per dantytą kreipiančiąją +90° Gali būti pasukamas 360° Pado paviršiaus skersmuo Ø 350 mm su 2 tvirtinimo grioveliais Ø 17 x 25 mm Fpsdpfeu N Einjx Afdsh

Būklė: naudotas, Technical details: Width: 400 mm Fpjdpfx Aswfrq Sofdjh Depth: 335 mm Height: 500 mm 2 pieces available (price per piece) Material: cast steel Cross slot: Quantity 4 Size: a = 22 mm, h = 41 mm, b = 37 mm, c = 15 mm Clamping hole quantity: 8 (sizes: 4 x 22 mm / 4 x 26 mm)

Gamybos metai: 1998, būklė: naudotas, Technical details: Profile width: 50 mm Working height: 950 mm Fpjdpfx Afju Ibuwjdsh Interface: RS 232 pinout Window profile processing machine for materials such as PVC, aluminium, and timber windows in a continuous through-feed process. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, an operator control panel, and transport units. Also included are a station with transport system vibrator, chip conveyor unit, and a stand with confirmation printer. Our photos first show the machine at its location, followed by images depicting the system prepared for transport and sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5 mm - Drilling unit with collet chuck (vertical upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical downward) - Twin drilling unit with collet chuck (vertical downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical upward) - Milling spindle, horizontal, with 11 slotting saws - Triple drilling unit with collet chuck (vertical downward) - Triple drilling unit with collet chuck (vertical upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width: 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width: 2,300 mm