Lange Mašinos pirkti naudotą (39 103)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: Ibedpjmhh Dhefx Acuoc - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version Iodpfx Acemhhyajuebc - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard Iodpfjmhhx Ijx Acuebc - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. Ibjdpfemhh Anex Acuec The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) Ijdpfx Acomhh Dzsuobc - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth Ibodpfxjmidyfe Acujc - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Ibodpfxsmhhl Hj Acujc Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm Ibsdpjmhhypsfx Acuoc - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), Įpurškimo mazgas Sraigto skersmuo: 120 mm Įpurškimo slėgis: 1172 bar Ši Husky GL 300PET P100/110 E12O pagaminta 2002 metais. Ji pasižymi 720 × 720 mm atstumu tarp tempimo strypų, maksimaliu formos eiga – 700 mm, bei 120 mm sraigto skersmeniu. Įranga siūlo sraigto L/D santykį 25,0:1 ir įpurškimo slėgį 1172 bar. Jei ieškote aukštos kokybės liejimo galimybių, apsvarstykite mūsų siūlomą Husky GL 300PET P100/110 E12O. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Ibodpjxn Uyrefx Acusc Liejamasis formavimas

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, mašinos/transporto priemonės numeris: L3423M0470, lazerio galia: 200 W, lazerio bangos ilgis: 1 064 nm, bendras svoris: 500 kg, Trumpf TruPulse 203 lazeris Įtampa: 380 V -10% iki 460 V +10%, 3 fazių AC + PE Apsaugos klasė: IP 54 Galia: 10 kW / 16 kVA Srovė: 23 A Dažnis: 50–60 Hz Svoris: 500 kg Trumpalaikės srovės stiprumo reitingas (SCCR): 5 kA Bangos ilgis: 1064 nm Išėjimo galia (pulsinis): 200 W Impulso energija: 55–90 J Impulso trukmė: 0,3–50 ms Pasikartojimo dažnis: 833 Hz Ibjdsxnbt Sepfx Acuec Spindulio sklaidos kampas: 12 mrad Didžiausia galia: 6–8 kW Šviesolaidžio skersmuo: 300 µm

Sąlyga: naudotas, Komplekt vibropolirovochnykh mashin Ibedpfx Aew Hclcscuec Vibrovanny 2 sht. S 3 tipami abrazivnykh materialov

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 49 070 h, ADIGE LT120 lazer aparat na prodaju! Servisni izveštaj dostupan na zahtev. Broj radnih sati: 49.070,5. Tehničke specifikacije: CNC radne ose mašine: X osa cevi: 6.500 mm Y osa vođenja snopa: 170 mm Z osa vođenja snopa: 95 mm A rotaciona osa (glavna stega): n x 360° A1 rotaciona osa (kontra stega): n x 360° W oslonac za istovarene komade: 85 mm Brzine: X osa cevi: 90 m/min Y osa vođenja snopa: 30 m/min Z osa vođenja snopa: 22,5 m/min A rotaciona osa (glavna stega): 750°/s A1 rotaciona osa (kontra stega): 750°/s Preciznost: Interpolirana tačnost pozicioniranja: ±0,05 mm Ponavljivost: ±0,03 mm Odstupanje pozicije: ±0,1 mm Dimenzije obratka: Maks. dužina sirovog materijala: 6.500 mm Min. preostala dužina cevi: 160 mm Dužina gotovog komada: 4.500 mm Min. prečnik cevi: 12 mm Maks. spoljašnji prečnik: 120 mm Min. dimenzija stranice kod pravougaonih/kvadratnih cevi: 12 mm Maks. prečnik upisanog kruga za pravougaone/ovalne cevi: 140 mm Maksimalna težina obratka: Sirovi materijal + gotov komad: 13,5 kg/m Upravljač: Siemens Sinumerik 840D RAM: 256 MB TFT kolor monitor: 10,4” Hard disk: 10 GB za NC programe PCU sa Windows operativnim sistemom Laser: Rofin Sinar DC020 Maks. laserska snaga: 2.000 W Maks. debljina lima: - Konstrukcioni čelik (O2): 6 mm - Prohrom (N2): 4 mm - Aluminijumska legura (N2): 3 mm Režim snopa: K-faktor >0,9 Potrošnja: Laserski gasovi: Boca sa predmešanim gasom unutar izvora lasera; zamena boce svakih 12–18 meseci u zavisnosti od radnog vremena. Gasovi za sečenje O2 ili N2: potrošnja zavisi od materijala i geometrije komada. Ukupna električna potrošnja: Ibodpfexb Rn Sox Acusc 20–40 kW/h (zavisno od materijala i geometrije rezanja) Potrošnja komprimovanog vazduha: 30 Nm³/h

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, plieno lakšto storis (maks.): 25 mm, galia: 6 kW (8,16 AG), Darbinis plotas 3000x1500. Įskaičiuota Loadmaster sistema. Dėl ilgesnio nenaudojimo reikalingas aptarnavimas. Ibjdpfx Ajwh R R Nocusc

Sąlyga: reikia remonto (naudotas), Maszyna do formowania wtryskowego, Engel ES 330/85, Maszyna używana Wymiary całkowite: 3100 x 1950 x 2600 mm Ibsdpfsukn S Hjx Acujc Masa: 5500 kg Producent: Engel Typ: ES 330/85 Rok produkcji: 1997 Dane elektryczne: 380V, 60 A Karty sterujące: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Įpurškimo blokas Sraigto skersmuo: 40 mm Uždarymo blokas Uždarymo jėga: 1600 kN Ibedpfx Ajxpknbocuec Papildoma įranga Robotą Demag DR711 galima įsigyti už papildomą mokestį. Ši DEMAG Systec 130/475-430 mašina pagaminta 2011 metais. Ji turi 1600 kN uždarymo jėgą ir 475x475 mm kolonos tarpą. Sraigto skersmuo – 40 mm. Mašinoje įrengti pneumo ir hidrauliniai vožtuvai. Papildomai galima įsigyti Demag DR711 robotą už papildomą kainą. Jei ieškote aukštos kokybės įpurškimo formavimo sprendimo, rekomenduojame DEMAG Systec 130/475-430 mašiną. Susisiekite su mumis dėl detalesnės informacijos. Pritaikymo sritys Įpurškimas / Liejimas į formas

Sąlyga: naudotas, veikimo valandos: 366 h, Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, pavaros tipas: Elektro, Drėgno valymo automatai Iodexha A Sepfx Acuebc Būklė: Paruošta naudojimui ir visiškai veikianti Techninė būklė: gera Baterijos įtampa: 24V

Sąlyga: geras (naudotas), Gamybos metai: 2014, Ref. Nr.: 10535 Gamintojas: ZOLLER Tipas: Venturion 810C3 Pagaminimo metai: 2014 Sandėlio vieta: Halberstadt Kilmės šalis: Vokietija Darbinė įtampa: 100 - 240 V Mašinos svoris: 450 kg Ijdpfx Aexmd Trocuobc Mašinos plotis: 2800 mm Mašinos aukštis: 2320 mm Gylis: 1030 mm Reikalinga erdvė: 3000 x 2000 x 2600 mm Valdymo bloko svoris: 80 kg Įrankio svoris (maks.): 50 kg Dažnis: 50 / 60 Hz Galia: < 1 kVA Suslėgtas oras: 6 - 8 bar Triukšmo lygis: < 54 dBA

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Duomenys Staklių svoris: 8200 kg Įpurškimo agregatas Ibedpfsxpknhox Acuec Sraigto skersmuo: 50 mm Spaudimo agregatas Spaudimo jėga: 2000 kN Ši DEMAG Extra 200-840 hidraulinė įpurškimo liejimo mašina pagaminta 2008 metais. Idealiai tinka preciziškam plastikų apdirbimui, pasižymi tvirta funkcionalumu ir patikimumu. Susisiekite dėl išsamesnės informacijos. Taikymo sritys Įpurškimo liejimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Bendrieji duomenys Matmenys plotis: 2400 mm Matmenys ilgis: 7800 mm Matmenys aukštis: 2200 mm Mašinos svoris: 20000 kg Pagrindinė pavara Atstumas tarp kolonų: 810x710 mm Įpurškimo mazgas Sraigto skersmuo: 70 mm Šūvio svoris: 1090 g/PS Eigos tūris: 1212 cm³ Įpurškimo slėgis: 1877 bar Užspaudimo mazgas Užspaudimo jėga: 4200 kN Atstumas tarp kolonų: 800x710 mm Presformos plokščių dydis: 1200x1100 mm Ši DEMAG Concept 420/810-2300 liejimo įpurškimo mašina pagaminta 2006 metais Vokietijoje. Įrengta Ergo valdymo sistema. Mašinos sraigto skersmuo – 60 mm, eigos tūris – 891 cm³, įpurškimo slėgis – 2420 bar, šūvio svoris – 800 g/PS, užspaudimo jėga – 4200 kN. Atstumas tarp kolonų – 800x710 mm, presformos plokščių dydis – 1200x1100 mm. Pritaikymo sritys Ibsdpfx Acexpkmdeuec Liejimas įpurškiant

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Glavaninis variklis Ašių skaičius: 3 Judėjimas X ašies eiga: 800 mm Y ašies eiga: 1000 mm Z ašies eiga: 700 mm Papildoma įranga Zondai: 2 komplekte Šis trijų ašių Wenzel XO 87 buvo pagamintas 2010 m. Jis pasižymi tvirtu koordinaciniu matavimo mašinos (CMM) dizainu: X ašies eiga 800 mm, Y ašies - 1000 mm, Z ašies - 700 mm. Jei ieškote aukštos kokybės matavimo galimybių, apsvarstykite mūsų siūlomą Wenzel XO 87. Dėl išsamesnės informacijos susisiekite. Pritaikymo sritys Matavimas Ibodpfx Acsxcb Rgsujc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 64 300 h, Allgemeine Daten Abmessungen Breite: 2.200 mm Abmessungen Tiefe: 7.200 mm Abmessungen Höhe: 2.400 mm Maschinengewicht: 17.700 kg Spritzaggregat Schneckendurchmesser: 60 mm Schussgewicht: max. 723 g/PS Einspritzdruck: max. 2.500 bar Schließeinheit Schließkraft: 3.200 kN Öffnungsweg: max. 700 mm Holmabstand: 720 mm x 720 mm Mindestformhöhe: 300 mm Plattengröße: 1.040 mm x 1.040 mm Zusätzliche Ausstattung Der Wittmann-Roboter ist nicht enthalten. Förderband ist enthalten; Schutzverkleidung nur für die elektrischen Komponenten vorhanden. Keine weiteren Peripheriegeräte enthalten. Ijdpfx Aoxpkqiecusbc Diese hydraulische Spritzgießmaschine wurde 2004 hergestellt. Sie verfügt über einen Schneckendurchmesser von 60 mm und kann ein maximales Spritzgewicht von 723 g verarbeiten. Die Maschine bietet eine Schließkraft von 3.200 kN und einen maximalen Öffnungsweg von 700 mm. Die Ausstattung umfasst besondere Merkmale wie 2x AS Kernzug und 6x DS Heißkanalregelkreise. Die Arburg Allrounder Selecta 720 S 3200-2100, die wir zum Verkauf anbieten, eignet sich ideal für den robusten Einsatz in der Produktion. Für weitere Informationen kontaktieren Sie uns gerne. Anwendungsbereiche Spritzgießen

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Ši Krauss Maffei 110-750 CX buvo pagaminta 2007 metais. Tai hidraulinė liejimo įpurškimu mašina, turinti daug darbo valandų, kas rodo jos patikimą veikimą per metus. 1 įrenginys turi 63 972 valandas, o 2 įrenginys – 69 878 valandas. Apsvarstykite galimybę įsigyti šią Krauss Maffei 110-750 CX hidraulinę liejimo įpurškimu mašiną. Dėl išsamesnės informacijos apie šią mašiną susisiekite su mumis. Isdexczthepfx Acuebc Pritaikymo tipai Liejimas įpurškiant

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2023, Allgemeine Daten Ibsdpfx Acoxl H D Djusc Maschinengewicht 2000 kg Steuerung Hersteller FANUC Spritzgießeinheit Schneckendurchmesser 22 mm Schließeinheit Schließkraft 300 kN Öffnungshub 230 mm Stäbe Abstand 310 × 290 mm Plattengröße 440 x 420 mm Diese FANUC Roboshot alpha-i30B wurde im Jahr 2023 gefertigt. Sie verfügt über eine Schließkraft von 300 kN, einen Schneckendurchmesser von 22 mm und eine maximale Einspritzgeschwindigkeit von 600 mm/s. Ideal für präzise elektrische Spritzgussanwendungen, überzeugt sie mit einer kompakten Plattengröße von 440x420 mm und energieeffizientem Betrieb. Wenn Sie auf der Suche nach hochwertigen Spritzgieß-Lösungen sind, empfehlen wir Ihnen die zum Verkauf stehende FANUC Roboshot alpha-i30B. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungen Spritzgießen

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Bendrieji duomenys Mašinos svoris: 800 kg Valdymo blokas Prekės ženklas: B&R Ibsdpfx Aoxn U Hlscuoc Modelis: Power Panel PP 65 Ši Krauss Maffei KM-RS 500 XS pagaminta 2016 metais. Įpurškimo formavimo mašina su pasirinktinai papildomu juostiniu konvejeriniu stalu ir tvirtu B&R Power Panel PP 65 ekranu. Maksimalus pjūklo disko skersmuo – 500 mm, laikiklio diametras – 30 mm. Idealiai tinka tiksliam pjovimui esant įvairiems profilių aukščiams. Puiki proga įsigyti šią Krauss Maffei KM-RS 500 XS įpurškimo formavimo mašiną. Dėl papildomos informacijos apie šią įpurškimo mašiną susisiekite su mumis. Pritaikymo sritys Įpurškimo formavimas

Gamybos metai: 2007, veikimo valandos: 88 893 h, Sąlyga: paruoštas naudoti (naudotas), Valdymo blokas Prekės ženklas: HAITIAN Ši Arburg A470 C 1500-400 pagaminta 2007 m. Ji turi Haitian padavimo sistemą, įdiegtą 2022 m., apsauginį gaubtą ir konvejerį detalių sandėliavimui. Su 88 893 darbo valandomis apsvarstykite galimybę įsigyti šią hidraulinę liejimo mašiną Arburg A470 C 1500-400. Susisiekite su mumis dėl daugiau informacijos. Ijdpfx Acoxn Uxheuobc Pritaikymo sritys Liejamieji įpurškimo darbai