Kreissaege Pašarų pirkti naudotą (124)

Sąlyga: geras (naudotas), Gamybos metai: 2016, Synchronization of the saw carriage - 6 units available Gbedpfx Abjuzxrgodsg

Gamybos metai: 2004, Sąlyga: naudotas, Tuščiasvoris: 3 940 kg Gbsdpfx Asx Tbc Hobdsg

Sąlyga: naujas, Gamybos metai: 2026, Yanigav Circular Saw SC600E / SC600M • Drive: Electric single-phase motor 3.1 kW / combustion engine Gboder D Nkpepfx Abdjg • Saw blade diameter: 60 cm / 60 cm • Saw blade bore: 30 mm • Tooth depth: 28 cm / 28 cm • Rotation speed: 1,450 rpm • Weight: 90 kg / 100 kg Price: €1,395 / €1,615

Sąlyga: geras (naudotas), Conveyor chain, feed chain, roller chain, drive chain -Axle spacing: 35.5 mm -Axle spacing pin: 71 mm -Chain width (without pin): 23 mm -Pin diameter: 10 mm Gjdpfx Abod Hcrlsdobg -Lengths: 1x 2270 mm, 1x 3610 mm, 1x 3810 mm -Price: complete

Sąlyga: naujas, Gamybos metai: 2026, Feed unit with consistent feed speed without power loss Metal gearbox with hardened gears Metal cover for feed rollers Forward and reverse operation High-performance motor Durable PU feed rollers Stand included as standard with extended outreach arm Individually swiveling and adjustable for horizontal and vertical use With counter Model: VSA 48 L Article No.: 5115500 Technical Data Maximum outreach: 1050 mm Number of feed rollers: 4 Roll diameter: 120 mm Roll width: 60 mm Roll spring travel: 25 mm Gedecnxmzopfx Abdjbg Speed settings: 8 Speeds: 2/ 4/ 5.5/ 6.7/ 11/ 13/ 16.5/ 33 m/min Motor power: 0.75 kW Connection: 400 V / 50 Hz Weight: 65 kg

Sąlyga: naudotas, rida: 734 733 km, galia: 324 kW (440,52 AG), pirmoji registracija: 02/2016, kuro tipas: dyzelinas, padangos dydis: 385/65R22,5, ašių konfigūracija: 8x4, ratų bazė: 3 700 mm, kuras: dyzelinas, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, bendras ilgis: 8 900 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 900 mm, krovinio erdvės tūris: 16 777 m³, Gamybos metai: 2016, Įranga: ABS, borto kompiuteris, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, priešrūkiniai žibintai, sėdynės šildytuvas, vairo stiprintuvas,

Sąlyga: naudotas, Original Vollmer auxiliary feed Gsdpfx Ajcfy H Uebdebg 2 different versions in stock, see photo

Gamybos metai: 2018, veikimo valandos: 4 000 h, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: COPR40801381, Talpa 15 m3 Gbodox Tcxcspfx Abdog Leidimas eksploatuoti keliuose Oro kondicionierius

Sąlyga: labai geros būklės (naudotas), Mikser wsadowy Buhler Batch Mixer, model Speedmix AHLM 4000, w bardzo dobrym stanie. Gbsdpfowf Am Djx Abdog

Sąlyga: labai geros būklės (naudotas), CNC flexible automatic through-feed drilling machine (portal-type) with dowel insertion system Movable panel (workpiece), movable working head (horizontal panel-workpiece) Control system: Power Control, WoodWOP software Godpfjd Nvi Dsx Abdobg Integrated machine safety cabin Workpiece drive via 3 transport belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1400 x 60 Maximum axis travel paths (X - Y - Z) mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces (in Y-axis) mm: 600 + mm 600 Total connected load (kW): 38 WORKING UNITS (TOP): Drilling units with vertical spindles (qty): 1 Independent vertical drilling spindles (qty): 38 + 3 special Independent horizontal drilling spindles (qty): 6 Grooving saw unit (for X-axis operations), diameter (mm): 100 Vertical main spindle (milling unit) no.: 1 x SK 30 (vertical main spindle power kW: 6) Automatic tool changer, disc-type, qty: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty): 2 Horizontal drilling spindles – right side (qty): 13 + left side (qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty): 1

Sąlyga: naudotas, Technical details: Sheet width: 250 mm Sheet thickness: 2 mm Number of rollers: 11 Straightening speed: 5–30 m/min Infeed height: 1250 mm Total connected load: 4.0 kW Machine weight approx.: 620 kg Gbsdpfx Abju Ic Ewjdog Machine dimensions (LxWxH): 1.15 x 1.02 x 1.5 m Control cabinet dimensions (LxWxH): 0.66 x 0.53 x 0.32 m STRIP STRAIGHTENING MACHINE WITH FEEDER Equipment: - Lateral strip guiding rollers Design: - Horizontal strip infeed height: 1250 mm - Tiltable: +30° ; -15°

Gamybos metai: 2025, Sąlyga: naujas, Rollers: 4 Roller width: 60 mm Roller diameter: 120 mm Gbodeg Ez Sqspfx Abdsg Spring deflection: 20 mm Speeds: 8 Stand: Tripod 1050 mm Motor power: 1 / 0.7 kW

Gamybos metai: 2015, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Technical data of the feed bunker with hydraulic moving floor and bag opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feed bunker with bag opener was previously used at a major recycling facility, where bagged waste was tipped into the bunker by wheel loaders. The bag opener was used to open the sacks and meter the waste for further processing. The system functioned perfectly up until disassembly and was replaced by a larger unit with higher throughput capacity. Remarks: Gsdpsu R Rtbsfx Abdsbg The machine is currently undergoing refurbishment in our workshop. The photos show the unit during its current overhaul phase, therefore the system is not yet fully reassembled. Upon completion of the refurbishment, expected by February 2025, the machine will be test run under operational conditions without material input. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors.

Sąlyga: labai geros būklės (naudotas), Simodrive feed module Manufacturer: Siemens Type: 6 SC 6116 OAAOO Gsdpfjfhkt Rjx Abdebg G 600 D 490 / 49 M6 REQ Output current: 60/120 A Dimensions (D x W x H): 290 x 150 x 480 mm Weight: 13 kg

Sąlyga: naujas, Made in Italy. Center height: 300 mm Swing over bed: 600 mm Swing over cross slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (special equipment / standard: 7.5 kW) Feed Z-axis: (93) 0.028 - 6.43 mm/rev Feed X-axis: (93) 0.012 - 2.73 mm/rev Threading, metric: (54) 0.5 - 224 mm Threading, Whitworth: (55) 72 - 1/8 TPI Threading, module: (54) 0.5 - 112 mm Threading, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MT 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic bedway lubrication - LED lighting - Micrometer longitudinal stop - 9.2 kW motor instead of 7.5 kW - Multifix quick-change tool post with 4 holders - Pneumatic tailstock movement assistance - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment using high-quality branded components, e.g., Siemens/Schneider - Bedway lubrication via hand pump Godpfx Abed Nk Ncsdjbg - Reducing sleeve - 2 fixed center points - All safety features according to CE standards: Chuck guard with plexiglass window, micro switch safety interlock. Tool post guard with plexiglass window. Rear splash guard along the entire length. Leadscrew and feed shaft safety via light barrier (integrated into the emergency stop circuit). Emergency stop push button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Travelling steady rest - Operating tools, inspection protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured to the latest CE standards EMO special price incl. 3-axis digital readout.

Sąlyga: naudotas, Gamybos metai: 2011,

Gamybos metai: 1997, Sąlyga: naudotas, Clamping device for bandsaw automatic machine, hydraulic double clamping vice, saw unit mount, feed, material positioning Godpfogbvnnox Abdjbg - Saw unit mount: from Behringer HBP 360 A bandsaw automatic machine - Stroke: 675 mm - Shaft: Ø 40 mm - Dimensions: see photos - Overall dimensions: 720/1545/H220 mm - Weight: 236 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Payload: 5,600 kg, Loading volume: 12 m³ / 12,000 l, Maximum speed: 25 km/h, Number of augers: 1, Tire size: 315/60 R22.5, Tread depth: 10 mm, Weighing system: scale, Feed discharge: front left, Corrosion: visible. Documentation available. Inspection on site is possible. Godpfxouantuo Abdjbg

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), Offered for sale is a used dosing bunker with internal dosing belt and internal conveying rake: Dimensions: Gbodpfx Ajiuxucobdog Length: 3.90 m, Width: 0.86 m, Height: 1.50 m. Belt width: 0.75 m. Includes a matching conveyor belt: Length: 4.20 m, belt width: 0.50 m. Very good condition. Technical details: see photos.

Sąlyga: naudotas, Gamybos metai: 2015,

Sąlyga: naudotas, Four-jaw chuck, Four-jaw lathe chuck, 4-jaw chuck - Manufacturer: Röhm, Four-jaw chuck Ø 315 mm - Through-hole: Ø 103 mm Gedpfx Abjg I D N Iodebg - Bolt circle: Ø 195 mm - Weight: 56 kg

Sąlyga: naudotas, Gamybos metai: 1996, darbinis plotis: 6 mm, Įranga: apšvietimas,

Sąlyga: naudotas, Gamybos metai: 2017,

Sąlyga: naudotas, Gamybos metai: 2014,

Sąlyga: naudotas, Gamybos metai: 2013,