Konsoles pirkti naudotą (213)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Wijchen
1 253 km
Konsolinis stovas Nežinoma
Unknown
Skambinti
Būklė: naudotas, - Dokumentacija prieinama: Ne
- CE sertifikatas yra: Ne
- Stovų skaičius [vnt.]: 15
- Sijų skaičius [vnt.]: 16
- Sijos ilgis [mm]: 1200
- Stovo aukštis [mm]: 3950
- Pado ilgis [mm]: 1500
- Atstumas tarp stovų [mm]: 1300
Finansinė informacija
Fsdpfewub H Isx Ahwjpd
PVM: Nurodyta kaina be PVM
PVM / Skirtumo apmokestinimas: PVM atskaitomas verslo subjektams
Pristatymas ir sandorio galimybė bet kuriam pramonės srities įrenginiui visada įmanoma.
Tess van den Boom
Mažas skelbimas
Würzburg
1 115 km
Konsolinis stovas
Bruckampunbekannt
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2005, Cantilever rack, double-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels – ideal for storing goods on Euro pallets, for example – used:
Price ex-location: €24,500 (net) incl. dismantling and loading!
Fsdowi I Tdopfx Ahwjpd
Prices for partial quantities on request – minimum purchase per rack section!
Manufacturer: Bruckamp Regalsysteme
Type: unknown
Year of manufacture: 2005
Max. load per arm: 2,000 kg
Arms bolted
Max. load per upright: 2 x 2,000 kg
Arm projection: 120 cm (IPE 100 standard)
Total rack height: 2.90 m (IPE 160)
Number of uprights: 69 pcs (currently 3 x 23 pcs)
Frame spacing: 1240 mm
Heights of the middle and top levels are fixed.
They could potentially be repositioned by drilling new holes. No pre-drilled holes currently present.
Version / Rack A:
Double-sided, 3 sections
Version / Rack B:
No middle section
Version / Rack C:
Middle section only on the right
Condition: good
Available: immediately
Location: Schweinfurt / Würzburg area
Mažas skelbimas
Aumühle
1 026 km
Konsolinis stovas "Ohra
Kragarmregal Ohra6 m hoch 900 kg/Ausleger
Skambinti
Būklė: naujas, OHRA Cantilever Racking
Negotiation price: €5,940.00 net ex stock
You are bidding on a racking unit with a length of 7.5 m, consisting of:
- 6 uprights with base, 6 m high
- 4 adjustable cantilever arms per upright (120 cm each), load capacity 900 kg/arm
- Diagonal bracing, cross bracing, and spacers included
- Bridges, mesh decking, and chipboard shelves are available separately for an additional charge
Frame spacing: 150 cm
Arm length / cantilever: 120 cm
Load capacity: 900 kg per cantilever arm
Load capacity per upright per side: 3,600 kg
Over 100 meters available
Heights of 2.5 m, 3 m, or 4 m available
Other configurations upon request
(Modifications and errors in technical data, specifications, and prices as well as prior sale reserved! Please refer to our General Terms and Conditions. All prices excl. VAT ex stock.)
Fpodeby Uunopfx Ahwsd
Purchase / Sale: We are constantly seeking and offering numerous items from various fields:
- Machinery from all industries
- Clearance stocks
- Special lots
- Broom-clean operational clearances
- Business liquidations
- Purchase of clearance stocks
Fast – Flexible – Efficient! We also clear out and/or dispose for insolvency administrators.
Send us a short message with your requirements and we will get back to you promptly.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Aumühle
1 026 km
Konsolinis stovas "Ohra
Kragarmregal OHRA 3m HöheAusleger 800 kg
Skambinti
Būklė: geras (naudotas), Cantilever Racking OHRA 3 m high
Over 100 m in stock, see images.
Height: 3 m
Arm length: 100 cm
Load capacity per arm: 800 kg
4.5 running meters, 4 uprights with arms
Negotiable price: €2,160,-- /net
Offer includes:
4 uprights with base, 3 m high
4 adjustable arms per upright, 100 cm each, load capacity 800 kg/arm.
Diagonal bracing, reinforcements, and spacers included.
Frame spacing: 150 cm
Load capacity per upright per side: 3,200 kg
Heights of 2.5 m, 4 m, or 6 m available
Other configurations on request:
Constant stock of more than 3,000 linear meters of pallet racking
from various manufacturers available.
Transport and installation available on request.
(Specifications, details, pricing subject to change and errors. Prior sale reserved! See our terms and conditions, all prices excl. VAT ex works)
Purchase / Sale
We are constantly seeking and offering a wide range of items from various sectors
Clean-swept facility clearances
Business liquidations
Fast – flexible – effective!
Fodpfx Aecd Dwyjhwepd
We also clear out or dispose of goods for insolvency administrators. Contact us with some brief information and we will get back to you immediately.
To visit our site,
please click on our logo!
Mažas skelbimas
Vokietija
1 153 km
Konsolinis vienpusis stelažas, 3 m aukščio, 1,20 m
europaeischer MarkenherstellerKragarmregal, feuerverzinkt
Skambinti
Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 500kg per arm – New:
Price ex location including loading!
1 rack unit with 4 uprights: €1,833 (net)!
Transport price within Germany (excluding islands): €500 (net)!
Naturally, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying the axis spacing). This example with 4 frames is simply the most common racking solution!
A cantilever racking system, hot-dip galvanized, consisting of:
- Single-sided upright approx. 3,000 mm high, hot-dip galvanized, IPE 160
- Base and arm depth 1200 mm each with 3 height-adjustable arms per upright
- Load capacity at 600mm load center: 500 kg per arm / 2250 kg per upright
Fpsdpfx Ahsddmpvswed
- With 4 uprights per storage level: 4 x 500 kg = 2,000 kg, arms IPE 80
- Includes longitudinal and diagonal bracing, center spacing = 1300 mm, standard is 1.30m
Other standard center spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m!
For lengths from 1.50m an additional surcharge applies to the stated price!
Special dimensions (other center spacings) are also available upon request, but carry a surcharge and longer delivery times since they are custom manufactured!
If you do not specify a different center spacing, we will supply the rack with a 1.30m center spacing.
In this case, a rack row with 4 uprights (3 bays) is approx. 4m long.
Delivered with all screws and nuts (shipment within Germany via parcel directly from Würth), without floor anchors.
Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
4 Stück Kragarmregal-Ständer einseitigHöhe 2,6 m / Nutztiefe 1 m / Länge 4 m
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version
Scope of delivery:
- 4 rack uprights, height 2,600 mm with base section 1,000 mm
- 12 cantilever arms with 1,000 mm depth, standard
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Incl. fastening material (without floor anchors)
- (Delivery time approx. 1 week)
- (No damaged parts!)
- (Spare parts reorder and extension possible at any time)
- (Offer available in larger quantities: approx. 90 uprights in stock)
Detailed description:
- Robust steel construction made from IPE profiles (bolt-together system)
- Surface hot-dip galvanized
- Rack height 2,600 mm
- Load capacity per upright 1,800 kg
- Base section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 bolted cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Rack length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and C4 load identification plates according to DIN standard
- Expert telephone consultation
- Made in Germany
- Short delivery times
- On-site collection possible
Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading.
When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer.
Fpsdsd Tbbdopfx Ahwed
Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
Kragarmregal einseitig Höhe: 3.000 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version
Scope of delivery:
- 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth
- 12 cantilever arms, standard, 1,200 mm useful depth
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Fastening material (bolts, nuts, and washers)
- (Delivery time approx. 1 week)
- (No damaged parts!)
- (Spare parts re-orderable and expansion possible at any time)
- (Offer available in larger quantities: approx. 40 uprights in stock)
Detailed description:
- Robust steel construction made from IPE profiles (bolted system)
- Surface: hot-dip galvanized
- Rack height: 3,000 mm
- Load capacity per upright: 2,250 kg
- Base section and cantilever arms with 1,200 mm useful depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 bolted cantilever arms per upright, standard (equals 4 storage levels)
- Load capacity per cantilever arm: 750 kg
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Rack length: 4,000 mm
- Including fastening material (excluding floor anchors)
- With assembly instructions and load capacity signs C4 according to DIN standard
- Expert telephone consultation
- Made in Germany
Fjdemhhx Ispfx Ahwepd
- Short delivery time
- Local pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable shipping with prior notification before delivery.
The material is packed in a practical way to enable easy unloading.
When installed outdoors, the stated load capacities are reduced due to wind and snow loads.
The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer.
The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended.
According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
Kragarmregal einseitig Höhe: 2.600 mmNutztiefe: 1.000 mm / Länge: 4.000 mm
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version
Fjdpfx Aemhhyaehwepd
Scope of delivery:
- 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth
- 12 cantilever arms, each with 1,000 mm useful depth, standard version
- Includes longitudinal and diagonal bracing for 1,300 mm spacing
- Fastening material (bolts, nuts, and washers)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts available and extensions possible at any time)
- (*Larger quantities available: approx. 40 uprights in stock)
Detailed description:
- Sturdy steel construction made from IPE profiles (bolted system)
- Hot-dip galvanized surface
- Rack height: 2,600 mm
- Load capacity per upright: 1,800 kg
- Base section and cantilever arms each with 1,000 mm useful depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 boltable cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm: 600 kg
- Includes longitudinal and diagonal bracing for 1,300 mm spacing
- Total rack length: 4,000 mm
- Fastening material included (without floor anchors)
- Comes with assembly instructions and C4 load capacity labels according to DIN standards
- Expert technical support by phone
- Made in Germany
- Short delivery times
- On-site pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable shipping with prior notification before delivery.
The material is packed in a practical manner to enable easy unloading.
If installed outdoors, load capacities are reduced due to wind and snow loads.
The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits.
Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended.
According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
4 Stück Kragarmregal-Ständer einseitigHöhe: 4,16 m / Tiefe: 1,2 m / Länge: 4 m
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version
Scope of delivery:
4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth
12 cantilever arms, 1,200 mm usable depth, standard
Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm)
Fastening material (bolts, nuts, and washers)
- (Delivery time approx. 1 week)
- (No damaged parts!)
- (Spare parts can be reordered and system can be expanded at any time)
- (Offer available for larger quantities: approx. 90 uprights in stock)
Detailed description:
Fpsdpfx Aod Tqalehwjd
- Robust steel construction made from IPE profiles (bolted system)
- Hot-dip galvanized surface
- Rack height 4,160 mm
- Load capacity per upright 2,250 kg
- Base section and cantilever arms with 1,200 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Rack length = 4,000 mm
- Including fastening material (without floor anchors)
- Assembly instructions and capacity signs C4 according to DIN standard included
- Expert telephone consultation
- Made in Germany
- Short delivery time
- On-site pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable shipping with pre-delivery notification.
Materials are sensibly packed for easy unloading on site.
When installed outdoors, load capacities are reduced due to wind and snow loads.
The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer.
The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended.
According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
4 Stück Kragarmregal-Ständer einseitigHöhe 3,5 m / Nutztiefe 1,2 m / Länge 4 m
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design
Scope of delivery:
4 racking uprights, height 3,500 mm, with foot section 1,200 mm
12 cantilever arms with 1,200 mm usable depth, standard
Incl. longitudinal and diagonal braces for 1,300 mm axle spacing
Incl. fastening material (without floor anchors)
- Delivery time approx. 1 week
- No damaged parts!
- Spare parts reorder and extensions possible at any time
- Offer available in larger quantities: approx. 40 uprights in stock
Detailed description:
- Robust steel construction made from IPE profiles (bolted system)
- Surface hot-dip galvanized
- Rack height 3,500 mm
- Load capacity per upright 2,250 kg
- Foot section and cantilever arms with 1,200 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- Each upright with 3 bolted cantilever arms, standard (= 4 storage levels)
- Load capacity per arm 750 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Rack length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and C4 load plates according to DIN standards
- Expert telephone consultation
- Made in Germany
- Short delivery times
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
Fpedpjfdkb Uofx Ahwed
We offer reliable freight with prior delivery notification.
Material is sensibly packed for easy unloading.
When installed outdoors, load capacities are reduced due to wind and snow loads.
The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits.
Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
Kragarmregal einseitig Höhe: 4.160 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design
Scope of delivery:
- 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth
- 12 cantilever arms, 1,200 mm usable depth, standard
- Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm)
- Mounting hardware (bolts, nuts, and washers)
- (Delivery time approx. 1 week)
Fjdpfx Ahsmhhf Sjwjpd
- (No damaged parts!)
- (Spare parts and extensions available at any time)
- (Offer available in larger quantities: approx. 90 uprights in stock)
Detailed description:
- Robust steel structure made from IPE profiles (bolted system)
- Surface hot-dip galvanized
- Rack height: 4,160 mm
- Load capacity per upright: 2,250 kg
- Base section and cantilever arms: 1,200 mm usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 bolted cantilever arms per upright as standard (= 4 storage levels)
- Load capacity per cantilever arm: 750 kg
- Includes longitudinal and diagonal bracing for 1,300 mm upright spacing
- Overall rack length: 4,000 mm
- Includes mounting hardware (excluding floor anchors)
- Includes assembly instructions and load signs C4 according to DIN standard
- Expert telephone advice
- Made in Germany
- Short delivery times
- On-site pickup possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight services with advance notice prior to delivery.
The material is packed efficiently to allow for easy unloading.
When installed outdoors, the load capacities are reduced to account for wind and snow loads.
The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer.
The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended.
According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.
Mažas skelbimas
Bad Feilnbach
1 160 km
Konsolinis stovas
4 Stück Kragarmregal-Ständer einseitigHöhe 3 m / Nutztiefe 1,2 m / Länge 4 m
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version
Scope of delivery:
- 4 rack uprights, height 3,000 mm with 1,200 mm foot sections
- 12 cantilever arms with 1,200 mm usable depth, standard
- Includes longitudinal and diagonal bracing for 1,300 mm upright spacing
- Includes mounting hardware (excluding floor anchors)
- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts re-order and expansion possible at any time)
- (*Offer available in larger quantities: approx. 50 uprights in stock)
Detailed description:
- Robust steel construction made of IPE profiles (bolt-together system)
- Hot-dip galvanized finish
Fedpjfdkbhofx Ahwopd
- Rack height 3,000 mm
- Load capacity per upright 2,250 kg
- Foot sections and cantilever arms with 1,200 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 bolt-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 750 kg
- Including longitudinal and diagonal bracing for 1,300 mm upright spacing
- Rack length = 4,000 mm
- Including mounting hardware (without floor anchors)
- Supplied with assembly instructions and load labels C4 as per DIN standard
- Professional phone consultation
- Made in Germany
- Short delivery times
- Local collection possible
Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading.
When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer.
The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.
Mažas skelbimas
Bad Waltersdorf
1 044 km
Konsolinis stovas
OHRA
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai konsolės svirčiai: 725 kg, keliamoji galia: 8 700 kg, lentynos aukštis: 8 700 mm, bendras ilgis: 4 700 mm, bendras plotis: 2 600 mm, bendras aukštis: 8 700 mm, ašių atstumas: 1 500 mm, gerklės gylis: 1 200 mm, keliamoji galia vienai sandėliavimo sekcijai: 2 900 kg, Įranga: dvipusis, Konsolinis stelažas geros būklės
Fpsdpfx Ahjw Uf Emswjd
Mažas skelbimas
Hofheim am Taunus
1 184 km
Konsolinis stelažas, 2,60 m H, 80 cm rankenos, 750 kg/
BruckkampKragarmregal
Skambinti
Būklė: naujas, Cantilever rack, single-sided, frame height 2.60 m, 80 cm deep arms, 750 kg per arm, hot-dip galvanized – New equipment:
Price ex location incl. loading!
Fsdpfjnwmwvex Ahwopd
Price: €1,480 (net)
Transport/packaging costs within Germany (excluding islands): €400 (net)!
You can, of course, build longer or shorter rack units by omitting or purchasing additional frames (or by varying the bay spacing); the example with 4 frames is simply the most common racking solution!
A hot-dip galvanized cantilever racking system, consisting of:
German premium manufacturer, new equipment
Description:
- Upright, single-sided, 2,600 mm high, hot-dip galvanized
- Foot and arm depth 800 mm
- Each with 3 height-adjustable cantilever arms
- Load capacity with load center at 400 mm
- 750 kg per arm / 2,250 kg per upright
With 4 uprights per arm level: 4 x 750 kg = 3,000 kg
Profiles: Uprights (frames) IPE 140, arms IPE 80
including longitudinal and diagonal bracing
Standard bay spacing between uprights is 1.30 m.
Other available bay spacings from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m!
For bay spacings from 1.50 m, a small surcharge applies to the given price!
Special dimensions (other bay spacings) also available on request, but incur additional charges and longer delivery times, as they are custom fabricated!
Unless you specify otherwise for bay spacing, we deliver the rack with a bay spacing of 1.30 m.
In this case, the length for one rack row with 4 uprights (3 bays) is approx. 4 m.
Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), without floor anchors.
If additional arms per upright are used, please ensure that the maximum specified load capacity of the upright is not exceeded; otherwise, the maximum usable load per arm decreases!
Other configurations (upright height, arm lengths, arm types, etc.) are available – please contact us!
Available special equipment (at extra cost), see photos attached:
- Foot section with impact protection
- Foot section with large impact protection
- Foot section with tyre guard
- Cantilever arm with impact protection
- Cantilever arm with plug-in roll-off protection
- Clamp-on roll-off protection
- Grating decks
- Conversion kit for storing pallets
Photos are examples of single-sided racks and/or the materials used!
Mažas skelbimas
Hofheim am Taunus
1 189 km
Konsolinis stovas
BruckampSuper Leicht
Skambinti
Būklė: naujas, Gamybos metai: 2025, Cantilever rack for light loads, single-sided, frame height 2m, rack length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – new:
Price ex works incl. loading: only €895 (net), plus packaging and freight.
Price per additional upright: €225 (net)
Transport costs on request!
Manufacturer: Bruckamp
Fedpfxsxbz Dds Ahwjpd
Year of manufacture: New
Model: Super Leicht
Set includes: 4 uprights with 5 arms each / 3 bays with connectors
Upright spacing: approx. 1m
Total assembled length: approx. 3m
Rack height: 2m
Base and arm depth: 500mm
Robust design – manufactured from IPE 100
Fixed welded arms at approx. 330mm intervals.
Load capacity per upright: 1,000kg
Load capacity per arm: 200kg
Includes floor anchors
Includes load capacity signage
Description:
4 uprights with 1m bay distance as a set including bolts.
Key advantages:
Easy assembly – the rack is designed for straightforward installation with minimal effort.
Versatile application – whether in the garage, workshop, or for small spaces, the shelf adapts flexibly.
Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.
Mažas skelbimas
Hofheim am Taunus
1 189 km
Konsolinis stelažas, 6,30 m H, 1,20 m ilgio svirtys, 900 kg
BruckampKragarmregal
Skambinti
Būklė: naujas, Gamybos metai: 2020, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 900kg per arm – New product:
Fodpfefivg Ssx Ahwjpd
Price ex works including loading!
1 racking unit with 4 uprights: €3,732 (net)!
Transport costs within Germany (excluding islands): €490 (net)!
A cantilever racking system, hot-dip galvanized, consisting of:
Single-sided upright approx. 6,300 mm high, hot-dip galvanized
Foot and arm depth 1,200 mm, each with 3 height-adjustable arms
Load capacity at load center 600 mm: 900 kg per arm / 4,000 kg per upright
With 4 uprights per arm level: 4 x 900 kg = 3,600 kg
Profiles: Frame: IPE220, Arms: IPE100
With longitudinal and diagonal braces e = 1,300 mm, standard is 1.30m.
Other standard lengths available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m!
For lengths from 1.50m, a small surcharge applies to the price mentioned above!
Custom dimensions (different center distances) are also available on request, but will incur an additional charge and have a longer delivery time as they are made to order!
If you do not specify a different center distance, the rack will be delivered with a 1.30m center distance.
In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m.
Delivered with all bolts and nuts (shipment within Germany via parcel directly from Würth), without floor anchors.
Other configurations (upright height, arm lengths, types of arms, etc.) available! Please contact us!
Mažas skelbimas
Hofheim am Taunus
1 189 km
Konsolinis stovas, 6,30 m H, 1,20 m ilgio svirtys, 500 kg
BruckampKragarmregal
Skambinti
Gamybos metai: 2021, būklė: naujas, Cantilever Rack, Single-Sided, 6.30m Height, 1.20m Arms, 500kg per Arm – New Equipment - :
Price ex location, including loading!
1 racking unit with 4 uprights: €4,115 (net)!
Transport costs within Germany (excluding islands): €490 (net)!
Of course, by omitting or purchasing additional frames, you can construct longer or shorter rack units (or by using different bay widths); this example with 4 frames is simply the most common rack configuration!
Fpodpfx Ajfivg Rohwod
A cantilever racking system, hot-dip galvanized, consisting of:
- Single-sided upright approx. 6,300 mm high, hot-dip galvanized
- Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms
- Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright
- For 4 uprights per arm level: 4 x 500kg = 2,000 kg
- Profiles: frame: IPE220, arms: IPE 80
- With longitudinal and diagonal bracing, e = 1,300 mm; standard is 1.30 m
- Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m
- For bay widths of 1.50 m and above, a small surcharge applies to the stated price!
- Custom dimensions (other bay widths) are also available on request, but also incur a surcharge and have a longer delivery time as they must be custom-manufactured!
- If you do not specify a different bay width, the rack will be delivered with a standard bay width of 1.30 m.
- In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m.
- Supplied with all bolts and nuts (shipped within Germany via parcel directly from Würth), without floor anchors.
Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!
Mažas skelbimas
Hofheim am Taunus
1 189 km
Konsolinis stelažas, dvipusis, 4,16 m aukščio,
Bruckamp1,20m Arme, 750kg pro Arm
Skambinti
Gamybos metai: 2021, būklė: naujas, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW –:
Price ex location including loading!
1 rack unit with 4 uprights €3,420 (net)!
Transport price within Germany (excluding islands): €550 (net)!
Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying bay spacing). This example with 4 frames is just the most common racking solution!
A cantilever racking system, hot-dip galvanized, consisting of:
- 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized
Fpsdpfefivhfsx Ahwed
- IPE 160 / 100
- Each with 2 x 3 adjustable arms, 1.20m, 750kg load capacity per arm
- With bracing approx. 1.30m
- Rack uprights double-sided approx. 4160mm high, hot-dip galvanized
- Foot and arm depth 1200mm with 3 height-adjustable rack arms each
- Load capacity at 600mm load center: 750kg per arm / 2250kg per upright side
- With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m
- Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m!
- From a length of 1.50m, a small surcharge applies to the stated price!
- Special sizes (other bay spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made!
- If you do not specify a different bay spacing, we will deliver the rack with a bay spacing of 1.30m.
- In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m.
- Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), excluding floor anchors.
Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!
Mažas skelbimas
Hofheim am Taunus
1 189 km
Konsolinis stovas, dvipusis, 3,50 m aukščio
Bruckamp1,20m Arme, 500kg pro Arm
Skambinti
Gamybos metai: 2020, būklė: naujas, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –:
Price ex location incl. loading!
1 racking unit with 4 uprights €3,210 (net)!
Transport price within Germany (excluding islands): €550 (net)!
Of course, you can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay spacing). The example with 4 frames represents the most common racking solution!
A hot-dip galvanized cantilever racking system, consisting of:
4 double-sided uprights, approx. 3.50m high, hot-dip galvanized
Fpodpfxsfivhge Ahwod
IPE 160 / 100
Each with 2x3 adjustable arms, 1.20m length, 750kg load capacity per arm
With bracing, approx. 1.30m
Double-sided upright, approx. 3500mm high, hot-dip galvanized
Foot and arm depth 1200mm, each with 3 height-adjustable rack arms
Load capacity at load centre 600 mm: 750kg per arm / 2,250kg per upright side
With longitudinal and diagonal bracing e = 1,300mm, standard is 1.30m.
Other standard bay lengths available ex stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m!
For a length of 1.50m and above, a small surcharge is added to the stated price!
Special sizes (other bay spacings) are also available upon request for an extra charge and longer delivery times as they need to be custom-built!
If you do not specify otherwise, we will supply the rack with a bay spacing of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approx. 4m.
Delivery includes all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.
Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!
Mažas skelbimas
Tönisvorst
1 231 km
Konsolinis stovas
Skambinti
Būklė: labai geros būklės (naudotas), Konsolinių lentynų stelažas, dvipusis, 10 lygių, išsikišimas 380 mm, ištraukiamas dar 220 mm, aukštis 2420 mm, bendras gylis 1000 mm, ilgis apie 2700 mm, konsolinės sijos iš 80 mm U plieno, labai tvirta konstrukcija, stelažas karštai cinkuotas, svoris 1190 kg, transportavimui išardytas.
Fpodpfx Ahew Icyuewod
Mažas skelbimas
Buzău
1 137 km
Konsolinės lentynos sandėliavimui
Tegometallupright 1600mm
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, bendras plotis: 80 mm, bendras ilgis: 1 600 mm, laisvas tarpatramis: 30 mm, Konsolinės stelažai – Idealiausias sprendimas ilgiems ir sunkiems kroviniams sandėliuoti
Fpsdpfx Ahow S Ttyewod
Konsolinės stelažai yra specialiai sukurti efektyviam didelių ir sunkių gaminių, tokių kaip vamzdžiai, mediena, metalo profiliai, nestandartinės paletės ir kitų netaisyklingų formų medžiagų sandėliavimui.
Pagrindinės savybės:
• Tvirta konstrukcija
• Reguliuojamos sijos maksimaliam sandėliavimo lankstumui
• Patogus priėjimas ir optimali prekių organizacija
• Tinka sunkiems kroviniams ir didelės apimties produktams
• Modulinė konstrukcija, lengvai praplečiama pagal sandėlio poreikius
Privalumai:
• Maksimaliai išnaudoja horizontalią sandėliavimo erdvę
• Sumažina krovinių tvarkymo laiką
• Pagerina saugumą ir sandėliavimo efektyvumą
Idealiai tinka pramoniniams sandėliams, dirbtuvėms, gamykloms ir logistikos centrams.
Kaina priklauso nuo modelio ir dydžio!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Duxford
1 595 km
Microm EC 350-2 kriokonsole (šalta plokštė)
MicromEC 350-2
Skambinti
Būklė: naudotas, Šis skelbimas skirtas Microm EC 350-2 krio-konsoliui.
Įrenginys yra visiškai veikiantis ir paruoštas nedelsiant eksploatacijai.
Microm EC 350-2 krio-konsolis yra esminis įrankis laboratorijoms, užsiimančioms histologija ir mėginių paruošimu, ypač dirbant su parafinu įtrauktomis (parafinu įlietomis) mėginiais. Pažangus dizainas ir funkcionalumas užtikrina patikimą veikimą optimaliems rezultatams pasiekti.
Pagrindinės savybės:
Didelė aušinimo plokštė: EC 350-2 komplektuojamas su erdvia aušinimo plokšte, specialiai sukurta mėginių sukietinimui ir palaikymui parafine. Ši funkcija užtikrina tolygų mėginių aušinimą, kuris yra itin svarbus išsaugant jų vientisumą.
Reguliuojamas temperatūros diapazonas: Vartotojas lengvai gali nustatyti temperatūrą tarp 0 ir -15ºC, suteikdamas tikslų pasirinktų mėginių kontrolės lygį. Šis lankstumas svarbus įvairioms metodikoms, kurioms gali reikėti skirtingo aušinimo režimo.
Mikroprocesorinis valdymas: Krio-konsolio veikimo procesus valdo mikroprocesorius, integruotas į parafino dozatorių, užtikrinantis tikslią temperatūros kontrolę. Ši technologija padeda palaikyti pastovias sąlygas, sumažinant temperatūros svyravimų, galinčių paveikti mėginio kokybę, riziką.
Nepriklausomas veikimas: EC 350-2 gali efektyviai dirbti maksimaliu -15ºC pajėgumu be papildomų nustatymų. Tai patikimas pasirinkimas laboratorijoms, kuriose svarbi stabilumas ir patikimumas mėginių apdorojime.
Pritaikymo sritys:
Fedpexxyf Ujfx Ahwjpd
Microm EC 350-2 idealiai tinka:
Histologijos laboratorijoms: Puikiai tinka ruošiant audinių mėginius pjaustymui, užtikrinant tinkamą parafino sukietėjimą optimaliai pjūvio kokybei.
Moksliniams tyrimams: Palaiko įvairias eksperimentines metodikas, kurioms reikalinga preciziška temperatūros kontrolė mėginių ruošimo metu.
Mažas skelbimas
Italija
1 694 km
Apdirbimo centrai su konsoliniu stalu
WEEKEVENTURE 5
Skambinti
Būklė: naudotas, mašinos/transporto priemonės numeris: 007716, Working area X-axis: 3250 mm
Working area Y-axis: 1220 mm
Working table: With vacuum pod supports
Main spindle power: 12 kW
Number of controlled axes: 4 axes
Number of drilling spindles: 18
Fodpewuz N Nsfx Ahwopd
Number of tool changers: 16
Mažas skelbimas
Schönaich
1 244 km
6 vnt. konsolinės biuro kėdės
Skambinti
Būklė: naujas, Elegantiškas laisvos svirties kėdė su dailiu, šlifuoto nerūdijančio plieno rėmu ir minkštu mikropluošto apmušalu šilto rudo atspalvio. Labai patvari, tinka ir sunkesniems asmenims. Geras modernaus dizaino ir komforto derinys. Nurodyta kaina už visas 6 vnt. Iš viso 6 vnt.: viena surinkta (žr. nuotraukas), kitos 5 neišrinktos, todėl galima lengvai transportuoti lengvuoju automobiliu.
Fpsdpfoxyqhisx Ahwsd
Mažas skelbimas
Weißenhorn
1 208 km
Konsoliniai stelažai - vienpusiai H= 2 m - 4,5 m
Skambinti
Būklė: labai geros būklės (naudotas), Height: approx. 2000–4500 mm
Width: approx. 1130 mm
Usable depth: 1 x 1000 mm
Frame load capacity: up to 3000 kg
Arm load capacity: up to 500 kg
6 storage levels incl. base
Single-sided design
Bolted foot profiles
Made of hot-rolled IPE sections
Finish: high-quality industrial paint, RAL 5010
Arms adjustable in 100 mm increments
Rack uprights: feet and arms bolted together
Increase storage capacity with reduced footprint
Organized storage for long goods
Price: €400 net per upright incl.
We assemble your custom rack system.
Contact us for details.
We also purchase used racks.
Please send photos and dimensions; we will make you an offer.
Contact:
Brennholz Blum – Mr. Dominik Blum
Upon request, we can deliver your rack system.
Fjdpfxep Dukqs Ahwepd
Feel free to call or write with any questions.
Palengviname jums paiešką: "konsoles"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Konsoles (213)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo




































































































































































































