Kampinis Perdavimo pirkti naudotą (1 474)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Gescher
1 168 km
Postalinis kampinis pjūklas
SalvamacLegend 500
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Semi-automatic under-table crosscut saw, including:
2 meter roller conveyor on the left side of the saw with
1 manual flip stop and
1 pneumatic flip stop
2 meter roller conveyor on the right side of the saw
General Technical Data:
Ffedpfxew Rcibe Ac How
Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm
Saw motor: 5.5 kW
Saw blade diameter: 500 mm (Z = 108)
Rotational speed: 2,800 rpm
Compressed air: max. 8 bar
Extraction ports: 1 x 120 mm / 1 x 100 mm
Voltage: 400 V / 50 Hz / 3 Ph
Working height: 900 mm +/- 20 mm
Standard accessories:
Automatic safety and pressure device
Two-hand control and protective shield
Carbide-tipped (HM) saw blade
SAFE
The ergonomically positioned two-hand control and the blade guard ensure absolutely safe operation. Safe, protected, and reliable!
SOLID
The LEGEND saws are designed and built to work even under demanding conditions and with hard woods. The structure is made from thick-walled, fully-coated reinforced steel. Solid, compact, and resilient.
FAST
Compared to a pull or radial arm saw, the LEGEND guides the saw blade pneumatically and extremely quickly through the workpiece. As a result, the physical strain on the operator is significantly reduced.
Mažas skelbimas
Kežmarok
712 km
Kampinė pjovimo staklės ilgam pjūviui
KUSINGSPS-500 LR Long Rip
Skambinti
Būklė: naujas, Gamybos metai: 2026, Parduodu šią išilginio pjovimo skersinę pjūklą.
Tinka lentų, brusų ar didelių brusų pjovimui.
Pjovimo ilgis: 600 / 900 / 1200 mm
Pjovimo aukštis: 100 / 150 / 200 mm
Variklio galia: 7,5 / 11 / 15 kW
Disko skersmuo: 500 / 600 mm
Mechaninis disko padavimas naudojant elektros variklį.
Individualūs parametrai gali būti pritaikyti.
Lentelės pagal specifikaciją.
Fsdpfxex Ut Iqe Ac Hofw
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
WEMA VogtlandBTrPi 900/8
Skambinti
Būklė: naudotas, Technical Details:
Number of spindles: 15 units
Number of stations: 8 units
Control system: PS 2000
Total power requirement: 72 kW
Machine weight approx.: 18.0 t
Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm
Control cabinet dimensions:
No. 1: LxWxH: 1000 x 850 x 2300 mm
No. 2: LxWxH: 1250 x 850 x 2500 mm
No. 3: LxWxH: 1000 x 850 x 2100 mm
No. 4: LxWxH: 1000 x 500 x 2350 mm
Required floor space approx. LxWxH: 5.0 x 6.2 x 3.8 m
TRANSFER MACHINE with 3 workstations featuring 15 drilling and milling spindles
Fjdpfx Acju Idvws Hefw
For example, suitable for large batch production of fittings.
Further technical specifications:
- Workpiece carrier: workpiece holding drum Ø 800 mm with 8 workpiece clamping stations, cycle time 10 sec.
- Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm
- Left side: 3x drilling and milling spindles and 2x tapping spindles
- Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis, plus 2x radial tapping spindles adjustable, 2x drilling/milling spindles (1 adjustable), 1x U-axis adjustable
- 1st Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm, reversible
- 2nd Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm, reversible
Equipment:
- 2 hydraulic power units
- Chip conveyor
- Belt filter by Filtertechnik Gera (fleece belt 430 mm)
- Operator panel
- Manual pushbutton
Subject to prior sale.
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
GNUTTIFMO 11-125
Skambinti
Būklė: naudotas, Technical details:
Number of spindles: 11 units
Number of stations: 11 units
Spindle taper: SK 40
Required air pressure: 6 - 7 bar
Total power requirement: 13 kW
Approx. machine weight: 10.2 t
Space requirement approx.: 4.0 x 4.0 x 3.4 m
Machine dimensions: 3.4 x 3.45 x 2.9 m
Control cabinet dimensions: 2.1 x 0.4 x 1.9 m
Thread cutting and drilling machine with 11 drilling and milling spindles
Accessories optional. Please enquire!
- Workpiece drum Ø 1000 mm with workpiece carrier, featuring 8 workpiece clamping stations; self-centering clamping jaws with 260 mm between jaws, max. 20 mm clamping jaw stroke (hydro-pneumatic circuit)
- 11 work stations with SK 40 taper
- 4x drilling/milling spindles on the right and 4x drilling/milling spindles on the left, plus 3x radial drilling/milling spindles
- Drilling unit: spindle stroke 125 mm, feed rate 0 – 2 m/min, speed 164 – 1005 rpm in 12 steps
- Thread tapping units: working stroke 125 mm, reversible rotation (left/right), speed 31.5 – 194 rpm in 12 steps
Ffjdpfx Aceu Idw Ie Hjw
- 8 opposing drilling units with SK 40 interface
- Coolant system with supply
- Operation via control panel
- With chip tray, L: 1000 x W: 740 x H: 220 mm
internally supplied.
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
WEMA VogtlandBTrPi 900/8
Skambinti
Būklė: naudotas, Technical details:
Number of spindles: 15 units
Number of stations: 8 units
Control system: PS 2000
Approx. machine weight: 17.0 t
Total connected load: 83.0 kW
Machine dimensions (LxWxH): 2400x2800x2800 mm
Control cabinet dimensions:
- No. 1: LxWxH: 1000x850x2350 mm
- No. 2: LxWxH: 1250x650x2230 mm
- No. 3: LxWxH: 650x600x1700 mm
- No. 4: LxWxH: 1000x500x1350 mm
Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m
TRANSFER MACHINE with 3 working stations equipped with 15 drilling and milling spindles
Suitable, for example, for the production of industrial valves in larger quantities (see photo)
Further technical specifications:
- Workpiece carrier: workpiece drum Ø 800 mm for 8 clamping stations, cycle time 10 sec.
- Drilling-milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. speed 2240 rpm
- Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes
- Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes
- Thread cutting unit 1: SK 40 tool holder; quill Ø 125 mm; stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation
- Thread cutting unit 2: SK 40 tool holder; quill Ø 125 mm; stroke 80 mm; speed 45 - 560 rpm; right/left rotation
Equipment:
- 2 hydraulic units
- Chip conveyor system
Ffodpfx Acou Idxfe Hew
- Band filter, manufacturer: Filtertechnik Gera (conveyor belt width 430 mm)
- Operator panel
- Hand-held control transmitter
This machine is not connected. Sale as is!
i. D.
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
WEMA VogtlandBTrPi 900/8
Skambinti
Būklė: naudotas, Technical Details:
Number of spindles: 15 units
Number of stations: 8 units
Control system: PS 2000
Total power requirement: 72 kW
Machine weight approx.: 18.0 t
Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm
Control cabinet dimensions:
No.1: LxWxH: 1000 x 850 x 2300 mm
No.2: LxWxH: 1250 x 850 x 2500 mm
No.3: LxWxH: 1000 x 850 x 2100 mm
No.4: LxWxH: 1000 x 500 x 2350 mm
Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m
TRANSFER AUTOMAT with 3 working stations, equipped with 15 drilling and milling spindles
For example: Production of large batches of fittings
Further technical specifications of the machine:
- Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, indexing time 10 sec.
- Drilling-milling unit: SK40 taper; spindle stroke 125 mm; feed 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm
Fsdpfxsu Idv Ds Ac Hofw
- Left side: 3x drilling and milling spindles, 2x tapping spindles
- Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis; additionally, 2x radial tapping spindles adjustable, 2x drilling/milling spindles (one of which adjustable), and 1x U-axis adjustable
- 1st Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left
- 2nd Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left
Equipment:
- 2 hydraulic power units
- Swarf conveyor system
- Belt filter by Filtertechnik Gera (fleece belt 430 mm)
- Operating panel
- Handheld control unit
Subject to prior sale.
Mažas skelbimas
Leipzig
872 km
Perdavimo mašina
GNUTTIFMO-11S-125 RGH
Skambinti
Būklė: naudotas, Technical Details:
Spindle mount: 40
Number of spindles: 9 units
Approx. machine weight: 10.0 t
Total power requirement: 13 (17.5 HP) kW
Machine dimensions (LxWxH): 4100x3400x3200 mm
Control cabinet dimensions (LxWxH): 2100x350x1900 mm
TRANSFER AUTOMATIC MACHINE – DRILLING AND TAPPING AUTOMATIC MACHINE – ROTARY INDEXING TABLE MACHINE with 9x drilling and milling spindles
- Workpiece carrier with 8 clamping stations: Workpiece holding drum Ø 1000mm (oil-pneumatic circuit), clamping stations equipped with self-centering jaws
- Right: 2x drilling-milling spindle, of which 1x with flexible u-axis and 1x tapping unit with 9 speeds, flexible
- Left: 2x drilling-milling spindles, of which 1x with flexible u-axis and 1x tapping unit with 9 speeds, flexible; also 2x radial drilling-milling spindles, flexible and 1x tapping unit with 9 speeds, flexible
- Drilling unit: Mount SK 40; spindle stroke 125mm; feed rate 0 - 2 m/min; speed in 12 steps from 164 - 1005 rpm
- Drilling and facing unit: SK 40; spindle stroke 90mm; feed rate 0 - 2 m/min; rapid traverse 7.5 m/min; speed in 12 steps from 166 - 1020 rpm
- 3 tapping units: Mount SK 40; working stroke 125mm; speed in 12 steps from 31.5 - 194 rpm; right and left-hand rotation
- 6 opposing drilling units: Mount SK 40
Equipment:
- Coolant system with supply
Fodju Idwbopfx Ac Hefw
- Operation via control panel
- Chip box
- Counter
- Staircase access
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
GNUTTIFM OR 7.175
Skambinti
Būklė: naudotas, Technical details:
Spindle mount: SK40
Spindle stroke: 175 mm
Number of spindles: 8 units
Number of stations: 5 units
Cycle time: 15-20 sec
Speed: drilling 225...1037 rpm
Speed: threading 50...316 rpm
Feed rate: 0.2 m/min
Total power requirement: 30 (40 HP) kW
Approx. machine weight: 9.0 t
Space requirement approx.: 3.9x2.4x2.5 m
Machine dimensions: L: 3.9 x W: 2.2 x H: 2.7 m
Dimensions L x W x H: +system 2.7 x 2.52 x 2.25 m
Transfer machine
The machine can be offered completely overhauled. (Photos show the original condition)!
The machine is designed for machining workpieces in a single clamping. It was mainly used for machining brass blanks with a diameter of 90 mm and approx. 100 mm length.
Description:
- Workpiece carrier cam plate with clamping stations, rotary table type with horizontal axis, 5 workpiece stations.
Machining units:
- Drilling spindle and thread cutting units
- Drilling capacity up to 2 3/4" and 81.53 mm in brass
- Thread cutting up to 2 1/2" and metric threads
The machine is equipped with a loading and unloading unit for workpieces. (Feed capacity 3-4 pcs/min and cycle time 15-20 sec.)
Including coolant system
In good condition.
Ffsdpju Idycsfx Ac Hsw
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
GnuttiFMF.9-125
Skambinti
Būklė: naudotas, Technical details:
Fsdpfx Aju Idvksc Hofw
Number of spindles: 9 units
Total power requirement: 83.0 kW
Machine weight approx.: 17.0 t
TRANSFER AUTOMAT with 9 drilling and milling spindles
- on the right: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed and on the left: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed, as well as 3 radial drilling and milling spindles, 9 speeds, gear-driven, fixed
internal diameter
*
Mažas skelbimas
Vokietija
872 km
Kampinis stalas
nicht bekannt
Skambinti
Būklė: naudotas, Technical details:
Clamping surface: 1000 x 500 mm
Ffedpfxsu Rd Nis Ac Hjw
Approx. machine weight: 530 kg
Dimensions (L x W x H): 0.5 x 1.0 x 0.49 m
Angle mounting table – machine table – machine clamping table
with 33 clamping holes M24
Vertical mounting side: W x H: 800 x 450 mm with 4 T-slots Ø 30 x 75 mm
Mažas skelbimas
Vokietija
872 km
Kampinis stalas
TOS- TRENCINFNG
Skambinti
Būklė: naudotas, Technical details:
Clamping surface: 630x400 mm
Number of T-slots: 8
Table rotation - manually/mechanically: 360° manual
Machine weight approx.: 175 kg
Ffjdsu Nkrbopfx Ac Hew
Angular extension table - machine table - machine clamping table for milling machine TOS, e.g. FNG or FNGJ
The frame can be swiveled horizontally 360° via handwheel (360° scale).
T-slots according to DIN 650 and 508
a=14mm; h=24mm; b=25mm; c=9mm
Base plate: size 380x300 mm with 6 clamping slots WxL=14x20 mm
The machine table is as good as new!
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
GNUTTIFMO.9-125
Skambinti
Būklė: naudotas, Technical details:
Number of spindles: 9 units
Machine weight approx.: 10.2 t
TRANSFER MACHINE with 9 drilling and milling spindles
- on the right: 2x drilling and milling spindle and 1x tapping spindle with 9 steps
- on the left: 2x drilling and milling spindle and 1x tapping spindle with 9 steps, as well as radial 2x flexible drilling and milling spindle and 1x flexible tapping spindle with 9 steps, i.D. (inside diameter)
Fedpfx Aou Idwnec Hefw
Mažas skelbimas
Vokietija
872 km
Perdavimo mašina
WEMA VogtlandBTrPi 900/8
Skambinti
Būklė: naudotas, Technical details:
Number of spindles: 15 units
Number of stations: 8 units
Control system: PS 2000
Total power requirement: 83.0 kW
Approx. machine weight: 17.0 t
Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m
Machine dimensions LxWxH: 2400 x 2800 x 2800 mm
Control cabinet dimensions:
No. 1: LxWxH: 1000 x 850 x 2350 mm
No. 2: LxWxH: 1250 x 650 x 2230 mm
No. 3: LxWxH: 650 x 600 x 2300 mm
No. 4: LxWxH: 1300 x 650 x 2350 mm
TRANSFER AUTOMAT with 3 processing stations and 15 drilling/milling spindles
For example, for the high-volume production of fittings
Additional technical data for the machine:
- Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec
- Drilling/milling unit: SK 40 spindle taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm
- Right side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm
- Left side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm plus 3x radial drilling and milling spindles, including 1x U-axis and 1x tapping spindle
- 1st tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation
- 2nd tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 80 mm; speed 45 - 560 rpm; right/left rotation
Fedeu Idxropfx Ac Hofw
Equipment:
- 2 hydraulic power units
- Swarf conveyor system
- Belt filter manufactured by Filtertechnik Gera (fleece belt 430 mm)
- Operator panel
- Hand-held control unit
subject to prior sale.
Mažas skelbimas
Bemmel
1 240 km
Dviejų galvučių kampinė suvirinimo staklė langų rėmams
WD 720 2 kops Hoeklasmachine voor ku
Skambinti
Gamybos metai: 2025, veikimo valandos: 50 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles
For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles.
This machine welds two corners simultaneously in one operation and is suitable for variable angles ranging from 60° to 180°. Thanks to the highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints—suitable for both white and colored profiles.
Key features:
- Simultaneous welding of two corners
Fedeykkx Dspfx Ac Hofw
- Variable welding angles between 60° – 180°
- Can also be used as a single-head welding machine
- 0.2 mm weld bead limitation (for white and colored profiles)
- Manual positioning of the movable head
- Pneumatic braking system for stable clamping
- Individually adjustable heating, temperature, and timing parameters
- Digital touchscreen control panel
- Special heating plates for even heat distribution
- Easy cleaning system for the heating plates
- Durable Teflon system for extended service life
- Specially designed mould system for more efficient working
Application
The Schtec WD 720 is ideal for medium-sized production facilities looking for a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high welding quality makes this machine suitable for series production of window frames.
Mažas skelbimas
Bösingen
1 304 km
Perdavimo mašina
MikronMSR CX 24
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, aušinimo skysčio bako talpa: 2 000 l, Used, well-maintained transfer machine / rotary indexing machine / dial machine MIKRON MULTISTAR CX 24
Availability: immediately
The following modifications have been carried out on the system:
Machine:
o All motor cables replaced.
o All sensor cables replaced.
o PLC program adapted to enable activation/deactivation of collets.
o Retrofitted with Knoll coolant system.
o Wiring diagram manually revised.
o Frequency converter replaced.
o Part selector mounted on the machine, including oil pump for oil recirculation.
Saw:
o Saw control system converted to Mitsubishi i-QR control.
o Complete electrical system of the saw renewed.
o Saw was completely mechanically overhauled.
Accessories:
o 1 x loading station (brass D= 3.9mm)
o 1 x unloading station
1 x part selector (8-position, see picture)
o 1 x lateral drilling unit
1 x rotating straightening device (completely re-bushed, October 2023)
o 1 x feeder/saw unit (control and inverter overhauled in 2021)
o 1 x pneumatic loading (via feed tube)
o 1 x chip conveyor with dirty water pump (without chip trolley)
o 1 x KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump, incl. low-pressure pump (5 bar) and high-pressure pump (60 bar)
Machine operated with cutting oil.
If you have any questions or need more information, please send us a message or give us a call.
Ffodpfx Ajyk Hraec Hsw
Mažas skelbimas
Riihimäki
622 km
Dviguba kampinė pjūklas
EmmegiSupra TU/4
Skambinti
Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Parduodama: Emmegi TU/4 dviguba kampinė pjovimo staklės, pagaminta 1995 m.
Patikimas ir paprastas dviejų galvų pjūklas aliuminio bei PVC profiliams pjauti.
Idealiai tinka langų ir durų gamintojams bei bendrai profilių gamybai.
Techninės specifikacijos:
Dvigubos kampinės pjovimo staklės
Fjdpsxz R Npofx Ac Hjfw
Disko skersmuo apie 350 mm (Ø300–400 mm)
Pjovimo kampai: 90° ir 45°
Pjovimo ilgis apie 3–4 m
Pneumatiniai horizontalūs spaustuvai
Variklio galia ~1,5–2,2 kW vienai galvai
Veleno greitis apie 3000 aps./min.
Svoris apie 500–600 kg
400 V / 6–8 bar
Staklės darbinės būklės, paruoštos naudojimui.
Prašome patikrinti tikslias technines staklių specifikacijas pas pardavėją.
Mažas skelbimas
Emskirchen
1 086 km
Pusiau automatinė kampinė plėvelės suvirinimo mašina / pusiau automatinė plėvelės sandarinimo mašina
RobopacAriane 5040 2TA
Skambinti
Būklė: naudotas, Pusiau automatinė folijos suvirinimo mašina ROBOPAC ARIANE 5040
Pagaminimo metai: 2005 – Serijos Nr.: KN 070192
Mobilioje važiuoklėje
Po suvirinimo – automatinis transportavimas į tunelį
Suvirinimo rėmas maks. 500 x 400 mm
Aukščio reguliuojamas darbo stalas
Sutraukiantis tunelis su konvejeriu
Plėvelės vežimėlis bėgiuose
Tunelio arkos matmenys: 544 x 387 x A 190 mm
Bendri matmenys: 1900 x 900 x A 1300 mm
Labai gera būklė – Puikios būklės
Ffsdpfx Aex Ux D Rjc Hew
Galima apžiūrėti nuotoliniu būdu per WhatsApp, MS Zoom ar Telegram
Sandėlyje Emskirchen/Nürnberg – Prieinama iš karto – Galima išbandyti
Aukcionas
Aukcionas baigtas
Vengrija
827 km
Profilių frezavimo staklės + dvigubas kampinis pjūklas
ElumatecSBZ 131 + DG 104
Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 193 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 7 200 mm, Y ašies eiga: 480 mm, Z ašies eigos atstumas: 340 mm, pjovimo plotis (maks.): 335 mm, ruošinio ilgis (maks.): 6 000 mm, frezosios veleno greitis (maks.): 6 000 aps./min, dalies ilgis (maks.): 6 000 mm, TECHNICAL DETAILS – Profile Milling Machine
Machining length: 7,200 mm
Number of axes: 4
Control: eluCAM graphical, Windows XP user interface
Workstations: 2 independently operating stations
Turret tool changer: 8 tools, servo-driven
Tool holder: BT 30
Disc cutter diameter: 180 mm
Tool length: 150 mm (from absorption point)
Travels
X-axis travel: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining)
Y-axis travel: 480 mm
Z-axis travel: 340 mm
Rapid traverse X-axis: 60 m/min
Rapid traverse Y/Z-axis: 30 m/min
Positioning accuracy: ±0.1 mm/m
Spindle
Milling spindle speed: 1 to 6,000 rpm
Milling spindle power: 6.0 kW
Supply
Air connection: min. 7 bar
Air consumption: 100 l/min
Electrical connection: 400 V, 3~, 50 Hz, 35 A
EQUIPMENT
Two independent workstations with light curtain and camera system
Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm
Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm
Non-swiveling inclined milling head for steel, Er20A, 1,554 rpm
Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross-cuts
Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm
Tool holder i=1:3.86 for 18,000 rpm, ER25
Cooling/lubrication unit for steel machining
Disc milling cutter arbor BT30, D=16 mm
Disc milling cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth
Fodjwprmzspfx Ac Hefw
---
TECHNICAL DETAILS – Double Mitre Saw
Maximum cutting length: 6,000 mm
Minimum cutting length at 90°: 335 mm
Minimum cutting length at 45°: 335 mm
Saw blade diameter: 420 mm
Mitre angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display
Mitre angle (inclination): pneumatically adjustable 90° and 45° inside
Saw direction: saw blades move from bottom to top
Control
Control type: E580/1
Length adjustment: automatic with positioning control
Saw blade tilt: pneumatically automatic between 90° and 45°
Positioning accuracy: ±0.1 mm/m
Positioning: pneumatic locking
Operating system: Windows
Saw unit
Speed: 2,800 rpm
Motor power per unit: 4,000 W (5.5 HP)
Saw blade cooling: included
Air consumption per cycle without cooling: 40 l
Air consumption per cycle with cooling: 64 l
Supply
Electrical connection: 230/400 V, 3-phase, 50 Hz
Air connection: 7 bar
Dimensions and weight
Length: 7,550 mm
Width: 1,600 mm
Height: 1,450 mm
Weight: 1,750 kg
EQUIPMENT
Automatically closing safety covers
Electronic positioning of heads with +/- 0.1 mm/m precision
Digital angle display for manually adjustable special angles
Pneumatically adjustable saw blade rotation and tilt angles
Operation via Windows control with 8.4" display and hand wheel
Saw blade cooling system included
Saw unit with lower feed for optimal cutting force
Mažas skelbimas
Borken
1 184 km
Ritininis transporteris su pavara ir perdavimo elementu
Interroll2,60m
Skambinti
Būklė: geras (naudotas), Interroll roller conveyor, 2.60m with drive and transfer unit
The Interroll conveyor element is in very good condition. Furthermore, the conveyor is equipped with its own drive motor and a 90° discharge belt to the left.
Series: 5600
Width: 410 mm
Length: 2625 mm
Roller pitch: 75 mm
Ffedpeh I El Sofx Ac Hsw
Load capacity: 200 kg per meter
Drive voltage: 400 V
Complete factory closure.
Large selection of mezzanine floors, pallet racking, shelving systems, vertical carousels.
High-quality industrial machinery, lathes, grinding machines, hand tools.
Find more items—new and used—in our shop!
International shipping costs on request!
Mažas skelbimas
İkitelli OSB
1 609 km
300x560 mm - Pusiau automatinis kampinis pjūklas
CRONOSSTECHCRONOSS 300X560 YDG
Skambinti
Būklė: naujas, Gamybos metai: 2026, galia: 2,2 kW (2,99 AG), pjovimo aukštis (maks.): 300 mm, pjovimo plotis (maks.): 560 mm, valdymo tipas: vadovas, pasukimo diapazonas: 60 °, pavaros tipas: hidraulinis, sukimosi greitis (maks.): 100 aps./min, sukimosi greitis (min.): 80 aps./min, Įranga: CE žymėjimas, dokumentacija / vadovas, sūkių greitis be galo kintamas, CRONOSS 300X560 YDG
Pivot Type Angled (Rotary Head) Semi-Automatic Band Saw Machine
The CRONOSS 300X560 YDG is a robustly constructed pivot-type semi-automatic band saw machine designed for medium-scale metal cutting operations. With its rotary head offering angled cutting capabilities from 0° to 60°, it delivers precise and repeatable results.
It provides a reliable cutting solution for steel construction workshops, machinery manufacturers, and metalworking facilities.
Standard Features
- Hydraulic vice
- Variable speed control (Inverter)
- Safety switches
- Hydromechanical blade tensioning system
- Variable angle cutting from 0° to 60° (Rotary Head)
- Angle gauge
- Adjustable head descent system
- 1 band saw blade
- 2 material support stands
Country of Origin: Turkey
Available in models suitable for diameters from 220 mm to 3000 mm
Technical Specifications – 300 YDG
Capacity at 90°
Round: 300 mm
Square: 300 x 300 mm
Rectangle: 300 x 560 mm
Capacity at 60°
Round: 200 mm
Square: 180 x 180 mm
Rectangle: 180 x 245 mm
Capacity at 45°
Round: 300 mm
Square: 235 x 235 mm
Rectangle: 235 x 360 mm
Motor & Technical Details
Main Motor: 2.2 kW
Hydraulic Motor: 0.37 kW
Coolant Motor: 0.09 kW
Band Saw Blade Size: 34 x 1.1 x 4100 mm
Material Feed Height: 809 mm
Vice Max. Opening: 600 mm
Vice Max. Closing: 0 mm
Support Stand Width: 615 mm
Dimensions (HxWxL): 1268 x 2035 x 2862 mm
Weight: 900 kg
Production & Supply
The CRONOSS 300X560 YDG is manufactured in Turkey. Different capacity and configuration options are available upon request.
For detailed technical information and a price quote, please contact us.
Band Saw Machine
Semi Automatic Band Saw
Pivot Type Band Saw
Rotary Head Band Saw
Metal Cutting Machine
Steel Cutting Band Saw
Industrial Band Saw
Hydraulic Band Saw
Angle Cutting Band Saw
300 mm Band Saw
300x560 Band Saw
Workshop Band Saw Machine
Ffjdpfx Asyntzpoc How
Structural Steel Cutting Machine
Mažas skelbimas
Cantù
1 476 km
Kampinis pjūklas
OMS SALVARANIFC 350 R
Skambinti
Būklė: geras (naudotas), Codice: 0110
Marca: OMS SALVARANI
Modello: FC 350 R - Conforme CE
Ffjdpfxswhffzo Ac Hsw
Troncatrice con basamento per legno, alluminio, PVC, plastica, ecc. - Conforme CE
Dati tecnici
Diametro lama mm 350
Motore trifase Watt 2800 - Giri/min 3000
Capacità di taglio in altezza mm 145
Capacità di taglio in larghezza a 45° mm 113
Capacità di taglio in larghezza a 90° mm 160
Basamento completo di aspirazione
Dimensioni totali mm 800 x 600 x 1500 h
Peso kg 90
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Wijchen
1 253 km
Dviguba kampinė pjūkla Pertici Univer 330IP
PerticiUniver 330IP
Skambinti
Būklė: naudotas, bendras ilgis: 3 750 mm, bendras plotis: 940 mm, bendras aukštis: 1 450 mm, - Dokumentacija prieinama: Ne
- CE sertifikatas: Ne
- Pagrindinio variklio galia [kW]: 1,1
Fodpfx Acexa Eibs Hsfw
- Didžiausias pjovimo aukštis [mm]: 110
- Transportavimo matmenys: 3750 mm x 940 mm x 1450 mm (i x p x a)
- Transporto paketų skaičius [vnt.]: 1
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms
Pristatymas ir įrenginių priėmimas galimi bet kokiai pramoninei įrangai bet kada.
Yorick Diebels
Mažas skelbimas
Reiden
1 411 km
Dviguba kampinė pjūklas
RapidDGL 220
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, - Įrankiai Ø 500 mm
- Disko sukimosi greitis 2800 aps./min.
Fedpfx Acox N R H Te Hjfw
- Svoris apie 1500 kg
Mažas skelbimas
Reiden
1 411 km
Dviguba kampinė pjūklas
RapidDGL 220
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, - Įrankiai Ø 500 mm
- Disko apsisukimų dažnis 2800 aps./min.
Fsdex N R Iqepfx Ac Hsfw
- Svoris apie 1600 kg
Mažas skelbimas
San Giovanni Al Natisone
1 262 km
Dvipusis gręžimo kampinis pjūklas, su reguliuojamais vertikaliais peiliais, 2 apatinėmis gręžimo gal
Skambinti
Būklė: naudotas, Double cutting and drilling machine with adjustable vertical blades, 2 lower drilling heads, and 2 upper drilling heads.
Ffodjv Tnihspfx Ac Hew
Palengviname jums paiešką: "kampinis perdavimo"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Kampinis Perdavimo (1 474)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Automatinis Kavos Aparatas
- Frezavimas
- Galios Nuėmimo Velenas Perdavimo
- Indukcinio Kaitinimo Įtaisas
- Kampas Stalas
- Kampas Vilkas
- Kampinis Apvalus Pjovimo
- Kampinis Stalas
- Kampinis Šlifuoklis













































































































































































