Jet Jbos 5 pirkti naudotą (67)

Būklė: naujas, Gamybos metai: 2024, Power: 1.35 kW Speed range: 230 – 3100 rpm Speed steps: 9 Spindle taper: MT2 Drilling stroke: 85 mm Spindle reach: 140 – 540 mm Table size: 500 x 740 mm / load capacity: 250 kg Head tilt: 90° left / 45° right Hedpfjuix Sgsx Al Njfi Column diameter: 80 mm Quick-action chuck: 1 – 16 mm Weight: 240 kg

Būklė: labai geros būklės (naudotas), !!!PARODOMOJI MAŠINA!!! Parduodama beveik nauja JET šlifuoklė DDS-237 su maksimaliu šlifavimo pločiu 940 mm. Mašina yra labai geros būklės, mūsų specialistų atnaujinta ir patikrinta. (Pilnai veikianti) Techniniai duomenys: – Dviguba būgninė šlifavimo mašina JET DDS-237 – Variklis: 400 V / 7,5 AG – Šlifavimo būgno greitis: 1 400 aps./min – Padavimo greitis: 3 m/min – Maks. šlifavimo plotis: 940 mm – Šlifavimo storis: 0,8–133 mm – Mažiausias ruošinio ilgis: 230 mm – Šlifavimo būgnas: po 152 x 940 mm – Šlifavimo juostos plotis: 75 mm arba 100 mm – Nusiurbimo jungtys: 2 x Ø100 mm Hsdsx Sqzvspfx Al Nefi – Matmenys (I x P x A): 1 090 x 1 420 x 1 090 mm – Svoris: 440 kg Mašina stovi A-8561 Söding ir gali būti apžiūrėta bei atsiimta mūsų darbo valandomis bet kada. Pasiliekame teisę parduoti iki peržiūros! Susiję terminai: Staklinis gręžtuvas, staklinė gręžimo mašina, grąžtas Nuoroda: R-D1618

Būklė: beveik kaip naujas (naudotas), DEMO MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a disc diameter of 300 mm. The exhibition machine is in its original condition, so you receive the full warranty. Technical Specifications Hedpfx Ajycc Tdel Njfi - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Sanding table size (disc): 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Sanding table size (belt): 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° - 90° - Dust extraction connection: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sander, professional, workshop, stationary, machine Reference: R-A0117

Būklė: beveik kaip naujas (naudotas), DEMONSTRATION MACHINE For sale is a like-new JET Oscillating Edge Sander OES-80CS, equipped with a 400V motor / 2,800 watts and a sanding belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Specifications - Motor: 400 V / 2,800 watts - Sanding belt speed: 17 m/s - Sanding belt dimensions: 150 x 2,260 mm - Sanding belt inclination: 90° - 180° - Sanding table dimensions: 810 x 180 mm Hedpfx Aleyb Sfas Nefi - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related keywords: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Būklė: beveik kaip naujas (naudotas), DEMONSTRATION MACHINE For sale is a JET 719-AS mortising machine in as-new condition, equipped with a powerful motor for demanding applications. As a demonstration machine, it remains in its original state, ensuring you receive the full warranty. Technical Data: - Motor: 230 V / 1,300 Watts - Spindle speed: 1450 rpm - Max. chisel size (hard/softwood): 19 x 19 / 25 x 25 mm - Keyed drill chuck: 13 mm - Max. workpiece height: 195 mm - Max. chisel stroke: 200 mm - Table travel (longitudinal/lateral): 400 / 100 mm - Table tilt: 0 – 35° - Table dimensions: 520 x 180 mm - Workpiece stop: 520 x 90 mm Hfjdeyb Sbnepfx Al Noi - Max. distance from chisel centre to stop: 100 mm - Machine dimensions: 650 x 500 x 1760 mm - Weight: 125 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: €75.00 incl. VAT Germany: €95.00 incl. VAT South Tyrol: €125.00 incl. VAT Related terms: JET 719-AS, mortising machine, slot mortising, wood joinery, 230 V drive, 1300W power, professional tool, workshop equipment, precision engineering, woodworking Reference: R-A0117

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, stalo ilgis: 1 000 mm, stalo plotis: 1 000 mm, darbinis slėgis: 3 800 juosta, WJS NC 1313 Easy Cut (Current condition shown in the pictures) - Prepared for two cutting heads (1x pure water) Hfedpfx Alsnab Rls Nji - Control unit will be renewed - Will be sandblasted and newly painted - Pump available as an option - Available 12-16 weeks after order confirmation Special Features: - Maximum of two cutting heads per Z-axis - Customizable according to customer requirements - 12 months or 2,000 operating hours warranty (excluding spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us for your tailored offer!

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1999, Water Jet Sweden NC 2010 - Two cutting heads - Control unit will be renewed Hodpfxenab Sij Al Nofi - To be sandblasted and newly painted - Pump optionally available - Available 12–16 weeks after order Special features: - Customizable to individual customer requirements - 12 months or 2,000 operating hours warranty (excluding spare and wear parts) We offer a discount when signing a maintenance or service contract! Contact us for your tailored quotation!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, mašinos/transporto priemonės numeris: 9558, Used fully functional WJS water jet cutting system with KMT SLIV 50 HP pump and sludge removal system. Table size: 4 x 3 meters Cutting head: 4x abrasive dynamic The machine is currently disassembled and cannot be inspected. Installation and commissioning will be carried out by us and are not included in the price. Hsdpfx Asi Hckrel Njfi The machine can also be completely overhauled (new control cabinet, new control system, and new CE certification. This would incur an additional cost of approximately €50,000).

Būklė: naujas, Įranga: įrankių žurnalo sukimosi greitis bepakopis, Masinė ketaus mašinos lova užtikrina maksimalų sklandumą ir stabilumą apdirbant nesubalansuotus ruošinius. Hsdpfxjw A Rqfj Al Njfi Galinis veleno korpusas gali būti perstumtas per visą lovą, pasukamas 360° su fiksacija ties 0, 30, 60, 90, 135, 180, 270 laipsniais. Variomatinis sūkių reguliavimas – besiūliai reguliuojamas sukimo rankenėle gale nuo 280 iki 2500 aps./min. Integruota veleno dalinė padalijimo sistema 36 x10°. Veleno fiksatorius priekyje, kad būtų lengva keisti tvirtinimo įrankius. Dviguba pleištinė užrakinimo sistema rankinėms atramoms ir iškyšoms – itin neslystanti ir efektyvi. Galinis centras su patikimu trapeciniu sriegiu, 108 mm įvorės eiga su skale, 9 mm perėjimo anga.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 5 900 h, Funkcionalumas: visiškai funkcionalus, Waterjet Cutting Machine 2010 Premium TAC From previous ownership, fully serviced in 02/2026, inspected and ready for operation, Certificate: Maximator JET Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 h • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • CNC Z-axis clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control: NUM • Rittal control cabinet on castors • Operating PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS, subscription • Handheld controller • Laser for position determination • Cutting valve MJ 100 Hjdpoxvqvfsfx Al Nsfi • Abrasive head aJET 3D • CNC abrasive metering unit with buffer tank • Abrasive storage container 1,200 kg with automatic pressure feeding system • High-pressure piping on axes up to cutting head • Safety system with light barriers • Water basin with heavy-duty slat supports • Stop edge in X and Y • Machine feet: precision wedge shoes • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, year 2006, 28,852 h, retrofit 10/2025 with warranty, new pulsation damper with TÜV inspection Technical data and prices subject to change and errors. Subject to prior sale.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 1 h, The CD700 is fully capable of performing cleaning applications that require high flow and pressure. The pump is powered by a 6-cylinder Volvo diesel engine. There are two engine variants available: with an exhaust system compliant with EU Stage V / US EPA Tier 4 final, or with an exhaust system compliant with EU Stage II / US EPA Tier 2. The Stage V solution utilizes a pure SCR exhaust aftertreatment system. The frame is manufactured for corrosion resistance, primed and painted for an attractive finish. The frame is equipped with rubber mounts and forklift pockets. The machine can be delivered either as an open-frame unit or as a fully enclosed solution in a trailer or container. The CD700 can be equipped with a manual gearbox, enabling the pump to operate at various flow rates and even allowing manual operation in the lowest gear. Similar in function to models by Falch, Hammelmann, Kamat, Uraca, Woma, etc., but not an original unit from these brands. Available Models: ----- Model Pressure Flow Rate CD700-1000 1000 bar 261 Lpm General Specifications: ----- Hfjdpfohgblksx Al Nsi Max. pump speed: 522 rpm Drive engine: 6-cylinder Volvo diesel, EU Stage V or EU Stage II Drive engine output: 522 kW Drive engine speed: 1800 rpm Diesel tank capacity: 800 L Max. fuel consumption: 90 L/h Dimensions and weight on base frame: 3100 mm x 1700 mm x 2300 mm (5850 kg)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure washer is easy to maneuver and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available Models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General Specifications: ----- Hfjdpfx Ajhf Naksl Nji Drive motor power: 6.0 kW Voltage: 400V (50Hz) - 440V (60Hz) Current: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 1 h, The CD200 series of our high-pressure units covers a pressure range from 200 to 2800 bar and a flow rate from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is manufactured from hot-dip galvanized steel, ensuring long-lasting durability and corrosion resistance. For an attractive appearance, the frame is primed and subsequently painted. The machine dimensions are 2250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine also features a galvanized roof panel with a lateral mount for protection and storage of items such as high-pressure hoses. Comparable to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow Rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm Hfsdpfxshgbhne Al Nei CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive unit: 4-cylinder AGCO Stage V diesel engine (optionally available without AdBlue) Engine output: 149.1 kW Engine speed: 1950 rpm Fuel tank: 135 L (skid version) and 200 L (trailer version) Max. fuel consumption: 18–20 L/h Dimensions & unladen weight (SKID): 2170 mm x 1350 mm x 1810 mm (1785 kg) Dimensions & unladen weight (TRAILER): 3800 mm x 1900 mm x 2000 mm (2500 kg) Including standard accessories.

Būklė: beveik kaip naujas (naudotas), veikimo valandos: 12 h, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) Met deze machine kunt u ook losse 3 mm pellets gebruiken! En uiteraard blokken. Zo goed als nieuw, 1 jaar garantie Inclusief slangen en nozzle. De COLD JET machine is geschikt voor industriële reiniging, voor zowel kleine als zeer grote projecten. Het voordeel van deze machine is dat hij niet is uitgerust met nieuwe generatie elektronica. Het is een van de meest krachtige machines op de markt. Deze machine verkeert in uitstekende staat. Cold Jet i3 Microclean & Dry Ice Press. Compleet straalsysteem met de volgende accessoires: COLD JET i3 Microclean (12 UUR GEBRUIKT) 1 x 20' straalslang 1 x Coldjet pistool 1 x nozzle Een van de beste machines ter wereld. Geen elektronica. Dat maakt hem betrouwbaar. En goedkoop in onderhoud. Voor vragen of een bezichtiging, neem contact op met DrDryice. Alle machines worden geleverd met 1 jaar garantie. Reparatie en onderhoud van Cold Jet machines mogelijk. Wij leveren ook nieuwe Cold Jet machines. Neem contact met ons op. Hjdpfx Alsxga Tzs Nsfi Wereldwijde verzending mogelijk. Cold Jet droogijsmachine te koop, droogijsmachine te koop, droogijsstraalmachine te koop, droogijs straalmachine kopen, droogijs blaster te koop, droogijsstraalmachine te koop, industriële droogijs blaster te koop, CO2 reinigingsmachine te koop, Cold Jet Aero 30 te koop, Cold Jet Aero 40FP te koop, Cold Jet Aero 40HP te koop, Cold Jet Aero 75 te koop, Cold Jet Aero 75 DX te koop, Cold Jet Aero75 DX, Cold Jet 75DX, gebruikte Cold Jet machine, tweedehands droogijsstraalmachine, Cold Jet Aero serie, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, droogijs blaster, droogijs reinigingsmachine, industriële droogijs reinigingssysteem, pellet droogijs blaster, droogijsstraalapparatuur, cryogene reinigingsmachine, CO2 straalmachine, kooldioxidestraalmachine, industriële reiniging, machine reiniging, onderhoudsreiniging, productielijnreiniging, matrijs reinigen zonder demontage, verf verwijderen met droogijs, coating verwijderen met droogijs, roest verwijderen, brand- en roetschade reinigen, elektrische kast reinigen, voedingsmiddelenindustrie reinigen, auto-industrie reinigen, drukpers reinigen, droogijs blaster 20 bar, hogedruk droogijs blaster, niet-schurende reinigingsmachine, gereviseerde droogijsmachine, 20 ft straalslang, droogijs pistool, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion droogijs blaster, ICEsonic droogijs blaster, droogijsstraalmachine Nederland, droogijsmachine Noordwijkerhout, industriële reinigingsapparatuur Europa, export droogijsmachine, DrDryice

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 200 h, mašinos/transporto priemonės numeris: 31015, valdymo tipas: PLC valdomas, automatizacijos lygis: vadovas, pavaros tipas: vadovas, valdiklių gamintojas: 4JET, lazeri tipas: šviesolaidinis lazeris, lazero valandos: 200 h, lazerio galia: 200 W, lazerio bangos ilgis: 1 064 nm, galia: 200 kW (271,92 AG), aušinimo tipas: vanduo, suslėgto oro jungtis: 5 juosta, bendras svoris: 350 kg, bendras ilgis: 1 310 mm, bendras plotis: 525 mm, bendras aukštis: 1 454 mm, Įranga: CE žymėjimas, aušinimo blokas, avarinis stabdymas, dokumentacija / vadovas, dulkių šalinimas, Siūlome kontaktinį mobilųjį lazerinio valymo sistemą 4JET, modelis M200, kuri buvo naudojama tik demonstracijoms ir bandymams. Taip pat siūlome platų priedų asortimentą: optinio pluošto prailginimo kabelį nuo 3 m iki 10 m, 5 vnt., lazerines apsaugines akines, mobilųjį lazerinės apsaugos uždangą su rėmu. Hfsdszlrzzspfx Al Noi

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 12 992 h, lazerio galia: 80 W, X ašies eiga: 740 mm, Y ašies eiga: 520 mm, bendras svoris: 8 000 kg, ašių skaičius: 3, Ši 3 ašių 4JET Pearl M pluoštinio lazerio pjovimo mašina buvo pagaminta 2020 m. Didžiausia lazerio galia - 80 W, o pagrindo plotas - 2400 x 2620 mm, todėl jis tinka įvairioms pjovimo užduotims. Staklėse yra ASD 300 ištraukimo įrenginys ir kintamas valdymo skydelis, užtikrinantis geresnį valdymą. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamas "4JET Pearl M" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Bangos ilgis: 1064 nm • Lazerio galia (maks.): 80 W • Išmatuota lazerio galia (maks.): 80 W • Impulso energija (maks.): 1: 1,5 mJ Hjdsyzn A Nepfx Al Nofi • Įtampa: 400 VAC (3P/N/PE) • Dažnis: 50/60 Hz • Nominali srovė: 63 A • Pagrindo plotas: 2400 x 2620 mm • Bendras svoris: apie 8 t • Ploto apkrova: 2 t/m² • Taškinė apkrova: 1 t • Pagrindo laikiklio dydžiai: 740 x 520 mm arba 370 x 520 mm • Suslėgtas oras: 6 bar, vidutinis srautas 35 l/min • Išmetamasis oras (filtruotas): H13 filtro klasė • Pridedama sudedamoji dalis: Kintamas valdymo skydelis Papildoma įranga • ASD 300 ištraukimo įrenginys • Atsarginių dalių paketas: • 16149) - Menge: 3,00 Stk. • Lęšis-/Linse f=75 mm (Art.-Nr. 16150) - Menge: 1,00 Stk. • Objektyvas / linzė, f = -30 mm (Art.-Nr. 16151) - Menge: 1,00 Stk. • išmanusis deflektorius su Y veidrodžiu (Art.-Nr. 16152) - Für Apertur 15 mm; SiC; Wellenlänge 532 nm; Menge: 1,00 Stk. • rhothor™ išmanusis deflektorius su X veidrodžiu (Art.-Nr. 15444) - Für Apertur 15mm; SiC; Wellenlänge 532nm; Menge: 1,00 Stk. • Objektyvas / linzė f=100,0 mm (Art.-Nr. 16153) - Menge: 1,00 Stk. • Filtras su išpjova Ø25 mm (Art.-Nr. 16154) - Menge: 1,00 Stk. • Veidrodis / Spiegel Ø1" apsaugotas sidabru (Art.-Nr. 16155) - Menge: 1,00 Stk. • Veidrodis / spygelis 2" HR532/45 PW2037C plokščias (Art.-Nr. Menge: 3,00 Stk. • sijos plėstuvas / Strahlaufweiter (Art.-Nr. 13487) - Menge: 1,00 Stk. • Objektyvas F-Theta f 100mm / Linse F-Theta f 100mm (Art.-Nr. 15145) - Menge: 1,00 Stk.

Gamybos metai: 2020, būklė: paruoštas naudoti (naudotas), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, Rated current: 12.5A, Peak current: 25A, Rated output: 8.65kW, Max. output: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, Weight: approx. 4000kg. Documentation available. Hfodpfoucw Tvox Al Noi