Hidrauliniai Sunkvežimių Kastuvas pirkti naudotą (22 684)

Sąlyga: naudotas, Technical details: Kedpfx Asu Nk Amsf Ijwt Lifting height: 90–800 mm Load capacity: 500 kg Table length: 1415 mm Table width: 860 mm Total power requirement: 1.1 kW Approximate machine weight: - t Dimensions (L x W x H): 1.45 x 0.9 x 0.9 m Transport dimensions (L x W x H): 1.45 x 0.9 x 0.2 m Operation via control stand: Up/Down and Emergency Stop Hydraulics: HAWE make, connected via bayonet coupling, flow rate 1.14 l/min at 400 bar pressure

Sąlyga: naudotas, Gamybos metai: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through hole in table: 4x Ø62 mm Ram speed, forward: 200 mm/s Kodpfxsw D Awmj Af Iswt Ram speed, return: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. dimensions (LxWxH): 2.1 x 1.4 x 3.4 m

Sąlyga: naudotas, Techninės detalės: Kwsdpfxeu N E I Rj Af Iot Bako talpa: 60 l Variklis: 1430 Svoris: 100 kg Matmenys I x P x A: 0,85 x 0,45 x 0,85 m Kitos techninės detalės: - Apsisukimai: 1 430 aps./min. (siurblys) - Hidraulinė jungtis: 3/4" - Alyvos karterio I x P x A: 810x430x40 mm vidiniai matmenys.

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame clearance: 1630 mm Kjdpfxeu Ib Ans Af Iswt Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Max. bending angle: 93° (L-/Z-bending) and 180° for folding Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength Hydraulics: OILTECH with approx. 200 liters

Sąlyga: naudotas, Gamybos metai: 1984, Technical Details: Pressing force: 50 t Bending length: 2550 mm Frame gap: 2045 mm Throat depth: 250 mm Stroke: max. 170 mm Back gauge – adjustable: approx. 800 mm Control unit: DELEM DA 24 e Stroke speed – upward (idle): 80 strokes/min Stroke speed – downward (idle): 160 strokes/min Total power requirement: approx. 7.5 kW Machine weight: approx. 6.2 t Machine dimensions (LxWxH): 3.3 x 1.8 x 2.7 m The machine has a control fault and is being sold as-is at the quoted price. Please inquire for further details. Ksdpeu Ib D Esfx Af Iswt - Motorized back gauge adjustment - Crowning - Maximum distance between table and ram bottom edge: 600 mm - Minimum distance between table and ram bottom edge: 430 mm

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Throat depth: 510 mm Operating pressure: 250 bar Punching force: 1000 kN t Round steel: up to Ø 65 x 12 and up to Ø 90 x 8.5 mm Electrical connection: 400V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 2.6 t total Machine dimensions approx. (LxWxH): 1.9 x 1.0 x 2.1 m Tool cabinet dimensions (L x W x H): 0.7 x 0.35 x 0.9 m Heavy-duty, robust electro-hydraulic punching machine with large throat depth -Punching unit: Punch holder with quick-change device for punches up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punch table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment mechanism and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Stroke rate: -at 10 mm stroke = up to 45 strokes/min. -at 30 mm stroke = up to 22 strokes/min. -at 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and position adjustable Kwsdeu Ick Topfx Af Iot Supplied with Ø 16 mm punch Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: various punching tools, punches, and dies as per inventory.

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Sheet width: 3,150 mm Sheet thickness: 13 mm Frame gap: 3,670 mm Blade length: 3,150 mm Hold-downs: 18 units Backgauge: motorized, 1,000 mm Height above floor: 850 mm Operating hours: 3,256 Table size (LxW): 3,770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Short-stroke mode Continuous operation Cutting gap illumination Hydraulic sheet lifting device Kwjdpfx Aou Icnfef Iot Rear light curtain Positionable backgauge

Sąlyga: naudotas, Technical details: Kedpeu Iczfjfx Af Iewt Sheet width: 400 mm Max. stroke: 600 mm Control: external Approx. machine weight: 0.4 t Dimensions (L x W x H): 2.7 x 0.8 x 0.62 m Hydraulic sheet feed unit, strip feeding device External control in conjunction with processing machine. - Feed length approx. 800 mm - Infeed height approx. 500 mm - Motorized/hydraulic operation Sale as described.

Sąlyga: naudotas, Technical details: Pressing force: 160 t Table area: 1,260 x 600 mm (vertical) Table plate size: 1,260 x 600 x 70 mm (vertical) Ram surface: 700 x 360 mm Throat depth: 300 mm Approx. machine weight: 9,000 kg Kodpfx Afju Nfpue Iswt Dimensions (L x W x H): 3.7 x 1.5 x 2.2 m Distance between bed and ram: 1,000 mm Mounted ram structure: L: 660 x W: 300 x H: 370 mm Feed rollers: one each on right and left, with vertical adjustment 250 mm (Ø 80 x 300 mm)

Sąlyga: naudotas, Technical details: Jaw width: 110 mm Machine weight approx.: 75 kg RÖHM vice with hydraulic clamping Kwedpsu Nungsfx Af Iot Clamping stroke max. 60 mm, clamping range max. 150 mm; jaw width 110 mm; hydraulic connection Ø 13.5 mm, 2x each The clamping jaws are equipped with prism clamping and cylindrical inserts Hydraulics Enerpac: Oil tank 300x200x130 mm; capacity 5 litres; 380 Volt; flow rate 1.11 l/min; connection Ø 17.5 mm Equipment: - Both hydraulic units are equipped with connection cables - One vice has a 2 m hydraulic hose connection integrated Two units available: no. 1 and no. 2 Price per unit

Sąlyga: naudotas, Technical details: Pressing force: 25 t Clearance between uprights: 360 mm Stroke: 500 mm Installation height, table/ram at top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Kjdpfx Aou U D I Rsf Iswt Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control console (single-hand operation possible in setup mode) Continuous and single stroke modes TÜV certified until 05/2024 i.D. *

Sąlyga: naudotas, Gamybos metai: 2003, Technical Specifications: Pressing force: 60 t Stroke: 400 mm Table area: 700 x 700 mm Pass-through opening in table: Ø 100 mm Frame width: 700 mm Clearance between uprights: 700 x 1300 mm Table height above floor: 850 mm Installation height: max. 1,150 mm Installation height table/ram (top): 400 - 800 mm Cylinder diameter: Ø 110 mm Total power requirement: 4.8 kW Approx. machine weight: 930 kg Machine dimensions (LxWxH): approx. 1.2 x 0.7 x 3.0 m HYDRAULIC DOUBLE-COLUMN PRESS Special design, welded from 25 mm steel plate Mode of operation: Single stroke Ram mounting: Pin M 70 x 2.5 mm and ram Ø 128 x 440 mm Table guard enclosure Kwsdsvrygijpfx Af Ijt Round ram Ø 130 x 120 mm Hydraulic unit

Sąlyga: naudotas, Technical details: Tank capacity: - l Overpressure: - bar Motor: 1400 rpm Total power requirement: 3.0 kW Kedpju N E Nhofx Af Ijwt Weight: 312 kg Dimensions (L x W x H): 1.05 x 0.67 x 1.94 m Application: Used for operating hydraulic assemblies. - Operating pressure min./max.: 60/70 bar - Nitrogen pressure: 54 bar - Hydraulic tank size (L x W x H): 630 x 440 x 380 mm with 100 litre capacity.

Sąlyga: naudotas, Technical details: Kjdpfxjwq I U Rj Af Iewt Sheet thickness: 1 mm Frame opening: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Approx. machine weight: 1,400 kg Machine dimensions (LxWxH): approx. 2.7 x 1.15 x 1.3 m Machine without foot switch; however, it is pre-wired for one. The previous owner converted the upper beam adjustment to 60 mm; greater adjustment is only possible by reverting the modification. The foot control for automatic operation is missing. Manual operation is functional. No back gauge.

Sąlyga: naudotas, Technical Details: Kedpfx Afevc Awxe Iowt Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Sheet width: 2050 mm Sheet thickness: 2 mm Frame width: 2400 mm Blade length: 2050 mm Stroke adjustment (upper beam): 250 mm Stroke adjustment (lower beam): 100 mm Maximum bending angle: 180° Rear gauge – adjustable: with guide rails, mm Working pressure: 5.0 MPa Total power requirement: 2.2 kVA Machine weight approx.: 2.3 t Machine dimensions (LxWxH): 3.5 x 1.0 x 2.2 m Hydraulic unit dimensions: 0.75 x 0.55 x 0.80 m HYDRAULIC SWING BEAM FOLDER Operation via control panel with console and foot switch Bending angle: sharp bend up to 135° with 2 mm sheet Upper beam stroke: 250 mm Lower beam stroke: 100 mm Kwodpfx Afju Ib Dfs Iet Bending beam stroke: 100 mm Bending clearance: 7 mm with scale indicator

Gamybos metai: 1997, Sąlyga: naudotas, Techninės detalės: Spaudimas: 250 t Eiga: apie 400 mm Prietakos plotis: 640 mm Stalas virš grindų: 900 mm Stūmoklio greitis: reguliuojamas Praėjimas šoninėse kolonos: 470 mm Kwsdpfx Aeu Nfn Rsf Ist Stalo tvirtinimo plotas I x P: 570x550 mm Stūmoklio tvirtinimo plotas: 570x550 mm Bendras energijos poreikis: 56 kW Mašinos svoris apytiksliai: apie 9,0 t Mašinos matmenys apytiksliai I x P x A: 2,5x1,8x3,8 m Transporto matmenys I x P x A: 2,6x1,8x3,1 m - Valdymas rankiniu būdu ir automatiniu režimu per SPS Allen Bradley - Vienarankis ir dvirankis valdymas - Stūmoklio keturių kolonų kreipiančiosios – be laisvumo - Derinimo ir automatinis režimas valdomas per SPS (šiuo metu neveikia) - Integruoti „Sick“ tipo šviesos barjerai ir apsauginės užuolaidos - CE žymėjimas nėra mentyti atitinkamai.

Sąlyga: naudotas, Gamybos metai: 2022, Technical Details: Pressure: 30 t Stroke: 142.5 mm Table Surface: 500 x 180 mm Pass-through Opening in Table: 500 x 160 mm Clearance Between Column Supports: 1000 mm Installation Height: Table/Ram Top: 120 - 1020 mm Machine Weight approx.: 176 kg Kwodpfou N A Eaox Af Ijt Dimensions (L x W x H): approx. 0.8 x 0.8 x 1.8 m Simple hydraulic double-column press – custom-built from 20mm welded steel sheet. Table support with V-block 260 x 205 mm Lower beam installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower beam vertical, adjustable manually, 10 positions, incremental spacing 100 mm Ram slide with stroke cylinder Ø 63 mm, with die holder, journal bore Ø 25 x 25 mm

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Pressure: 200 t Bending length: 4000 mm Ksdpfxou Icc Ao Af Ijwt Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70 - 80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table size (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connected load: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (LxWxH): 4.6 x 1.6 x 3.3 m Massive welded steel construction Possible modes of operation: manual, semi-automatic, fully automatic incl. 2 table extensions Rear support 700 mm, motorized travel, and 2 support arms with 1500 mm motorized travel (right/left) Operation via control panel with emergency stop as well as electric foot switch Hydraulics: max. pressure 318 bar; oil filling approx. 170 liters; pump capacity 19.3 l/min Control: DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tools optional

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Sheet width: 4050 mm Sheet thickness: 16 mm Frame gap: 4900 mm CNC controller: Robosoft SC5 Controller Backgauge: 1000 mm, motorized Cutting angle: 0.5° - 3° Blade gap adjustment: yes / adjustable in mm Hold-downs: 23 pcs Height above floor: 1030 mm Table size (L x W): 4000 x 520 mm Machine weight approx.: 19.2 t Kjdpfx Afju Icpco Iswt Machine dimensions: 5.2 x 2.2 x 2.78 m Additional features: - Blade length: 4100 mm, can be rotated 4 times - Strokes per minute: 5 - 11 - Table: side stop with linear scale, removable stop bar 1000 mm, ball transfer assist - Front support: L x W x H: 1600 x 1100 x 1000 mm, movable on roller rail for easy handling - Backgauge adjustable, motorized and foldable Operation via control panel with pendant arm and foot pedal Equipment: - Light curtain at the backgauge - Cutting line illumination Accessories: - 1 set (2 pieces) of shear blades

Sąlyga: naudotas, Techninės detalės: Spaudimas: 80 t Stovo plotis: 880 mm Montavimo aukštis: 200 mm Stalo dydis: 880x300 mm Aukštis virš grindų: 1000 mm Stovo tarpas: 800 mm Bendras galios poreikis: apie 12 kW Mašinos svoris: apie 2855 kg Reikalinga erdvė: I:1,4xP:1,65xA:1,9 m SPAUSDINIMAS - PRESAVIMAS - Šiluminė presa (šildoma presa) Kwjdpfsu Icwtex Af Iot Pritaikymo galimybės: - pvz., folijoms, plastikams, popieriui, kietoms plaušienoms ir kt. - Antspaudo plokštės dydis: 600x310 mm Įranga: - Skaitiklis - k - Maitinimas 380/415 V / 50 Hz Priedai: - Matricos laikiklio plokštė (600x300x90mm), nešildoma. Parduodama kaip yra.

Sąlyga: naudotas, Techninės detalės: Spaudimas: 80 t Įrengimo aukštis: 600 mm Kwodpfx Aeu Nfnwof Iot Stūmoklio eiga: 200 mm Spaudimas: 30 t Įrengimo aukštis: 680 mm Stūmoklio eiga: 300 mm Rėmo plotis: 1060 mm Pagrindo plokštės tvirtinimo paviršius: 1060x600 mm Stalo aukštis nuo grindų: 720 mm Stūmoklio greitis: Stūmoklis/ Ram 1: 40 mm/s Stūmoklio greitis: Stūmoklis/ Ram 2: 95 mm/s Pagrindo plokštės tvirtinimo paviršius: Dm=150 mm Bendras energijos poreikis: 13 kW Apytikris staklių svoris: 4,5 t Apytikriai užimama vieta: Ilgis:1,6xPlotis:1,1xAukštis:3,4 m SURINKIMO PRESAS - Presas su dviem stūmokliais 30 t + 80 t - Valdymas koja Presas parduodamas Leipcige, kaip aprašyta, išvežimui laisvas.

Sąlyga: naudotas, Gamybos metai: 1991, Technical specifications: Pressure: 40 t Installation height: Table/ram upper position: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions (LxWxH) approx.: 2.3 x 1.45 x 2.40 m The press features a welded frame and is designed according to static calculations. (Information provided by manufacturer) The pump unit is equipped with a three-stage pump system (high pressure pump, low pressure pump, and control pump). Additional technical data: - Ram plate dimensions (W x D): 900 x 500 mm - Pin hole in ram: Ø 40 x 75 mm - Hydraulics: Tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min. - Overrun distance: 7 mm - Overrun time: 58 ms Kwodou Nfp Iopfx Af Ijt - Single stroke and automatic cycle - Light barrier (can be overhauled as an option) Two-hand control and/or control panel

Sąlyga: naudotas, Gamybos metai: 1960, Technical Details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Kwedpfx Afou Nfude Iet Installation height (table/ram up): 630 mm Installation height (table/ram down): 230 mm Table clamping surface: 420 x 400 mm Table through-hole: 220 mm Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. (LxWxH): 1.1 x 0.5 x 2.1 m

Sąlyga: naudotas, Technical details: Delivery pressure: 60 bar Drive power: 22 kW Ksdpfxou N Erio Af Ijwt Flow rate: see nameplate (l) Delivery pressure: 50 bar Drive power: 11 kW 5 hydraulic power units for sale. 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) 2 units with 50 bar and 11 kW (SA 780/38) Prices vary depending on unit size. incl. VAT