Heller Bzh 07 pirkti naudotą (65)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 26-44041, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 1 100 mm, valdiklių gamintojas: Siemens, TECHNICAL DETAILS X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 1100 mm Feed forces X-axis: at duty cycle S3 - 40% 15,000 N Y-axis: at duty cycle S3 - 40% 15,000 N Z-axis: at duty cycle S3 - 40% 20,000 N Feed rate in X, Y, and Z axes: 1–30,000 mm/min Rapid traverse speed: 30,000 mm/min Acceleration in X, Y, and Z axes: 3.0 m/s² Rotary table: 20 l/min Machine weight: approx. 15.2 t Tool holder: SK50 Dwodpfxev S H S Ss Af Hoc Alternative tool holder: HSK-A 100 Spindle speed range: 45–6,000 rpm Pallet size: 630 x 800 mm Pallet change time: 21 s

Sąlyga: naujas, Heller Uni Pro ACPU90-S8M E 23 < unused > in sealed original packaging, 100% functional Dwedsi Ea Efopfx Af Hoc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, 9 heating zones 2 cooling zones (1 setting) Center support Electric width adjustment (programmable) 5 mm linked chain transport Flux capacitor Interface: SMEMA Hc2 controller Dsdpfxsv U Acxe Af Hswc

Sąlyga: geras (naudotas), Year of Manufacture: 1999+2001 Crankshaft Machining Cell Dwjdov I Ab Ujpfx Af Hjc Combination of concentric turning and eccentric milling operations on two machines, which are connected via a common chip conveyor with single-point discharge. Control System: Siemens 840D Tool Interface: Heller Nominal tool diameter Ø700 mm – tools are not included in the scope of delivery but may be taken over at extra cost or newly procured. NC-controlled steady rest for milling operations Both machines equipped with double-sided 3-jaw chucks from Blessing, featuring integrated aligning arms. Each machine features an automatic top-loading hatch with interface for loading systems; manual loading also possible. The machines are currently in serial production and can be inspected under power. Setup for customer-specific components is available by arrangement and at additional cost, including documentation of changeover parts and tooling. Securing of control system and drives included – ex works site. Availability subject to agreement, warranty excluded.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: SK50 - Spindle drive power: 60 kW - Spindle speed: 50-8000 rpm - Gearbox Dsdpfsuhb D Aex Af Howc - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 1250 / 1200 / 1400 mm - Rapid traverse speed (X/Y/Z): 50 m/min SWIVEL AXIS A - Travel range: [degrees] - Minimum resolution: 0.001° SWIVEL AXIS B - Travel range: (+/-) 360° - Minimum resolution: 0.001° - Feed speed: 10 rpm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 50 - Tool change time: 6.3 s TABLE - Table size: 1100 mm - Max. table load: 2000 kg - Max. workpiece dimensions (diameter x height): 1810 x 1400 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 50 kW WEIGHT AND DIMENSIONS - Required floor space: 7400 x 5400 mm - Machine height: 4800 mm MACHINE HOURS - Power-on hours: 14,238 h ACCESSORIES - Control: Siemens 840 D SL - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: Shopmill - Electronic handwheel - Direct measuring systems - Synchronous tapping - 3-color status lamp - Coolant tank: 2450 l * with high-pressure pump: 50 bar * with coolant chiller * with magnetic filter * with spray gun - Internal coolant supply (IKZ) - Micro-spray unit - Chip conveyor - Oil mist extraction - Spindle cooling - Tool probe system: Renishaw - Workpiece probe system: Renishaw - Tool breakage monitoring - Electrical transformer - Tool holders

Gamybos metai: 1997, Sąlyga: geras (naudotas), uni-Pro CNC 90 control Travel paths X/Y/Z: 800/800/710 mm Dwedpfxslkgfao Af Hsc Spindle speed: 4,500 rpm Tool magazine for 52+120 tools SK 50 Indexing table 1° 4-station pallet changer 500x630 mm Chip conveyor

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 1 100 mm, valdiklio modelis: Siemens Sinumerik 840D, sukimosi greitis (maks.): 6 000 aps./min, The machine is particularly suitable for the mechanical machining of cylinder heads and cylinder crankcases. The machine has been operated in single-shift operation since 2013. Regular maintenance has been carried out. TECHNICAL DETAILS X-axis travel: 1,000 mm y-axis travel: 800 mm z-axis travel: 1,100 mm Control system: Siemens Sinumerik 840D Dwjdpfx Afov Tl Rvs Hjc Spindle Tool holder: SK 50 Speed range: 45 – 6,000 rpm Pallets & Magazine Pallet size: 630 x 800 mm Pallet change time: 21 s MACHINE DETAILS Machine weight: approx. 20 t Space requirements: approx. 6.80 x 3.00 x 3.20 m

Sąlyga: naujas, Heller SL90 F A 23 plug-in card Uni Pro CNC 90 < unused > in opened original packaging, 100% functional Dwodpfx Asi Ea E Rjf Hec

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, Heller FMS with 2 x H2000 Machine Make / Model: HELLER H2000 Operating Hours: 59,654 Year of Manufacture: 2016 Control: Siemens 840D SL Spindle: PC63, 10,000 rpm, 38 kW, 242 Nm Tool Clamping System: HSK63 Dsdpfx Afswh Td Eo Hjwc Magazine / Positions: Chain Magazine / 160 positions Comfort Operator Terminal, Set-up parallel to main production time Rotary Table: 360,000° X 0.001° Coolant System: Knoll KF 400 / 50 bar Working Range XYZ (mm): 630 / 630 / 630 Pallet Size (mm): 500 x 400 Workpiece Clamping: Mechanical Additional options, features: Drill Breakage Control (SBBK); FMS Interface, Infrared Receiver Probe (Renishaw), Extraction Interface, Coolant Chiller Machine Make / Model: HELLER H2000 Operating Hours: 60,546 Year of Manufacture: 2016 Control: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool Clamping System: HSK63 Magazine / Positions: Chain Magazine / 240 positions Comfort Operator Terminal, Set-up parallel to main production time Rotary Table: 360,000° X 0.001° Coolant System: Knoll KF 400 / 50 bar Working Range XYZ (mm): 630 / 630 / 630 Pallet Size (mm): 500 x 400 Workpiece Clamping: Mechanical Additional options, features: Drill Breakage Control (SBBK); FMS Interface, Infrared Receiver Probe (Renishaw), Extraction Interface, Coolant Chiller Machine Make / Model: FASTEMS FPC750 with extension container Operating Hours: No counter installed Year of Manufacture: 2016 Control: FASTEMS Storage Positions: 24 storage spaces, 2 set-up spaces Workpiece Clamping: Mechanical Additional options, features: 20 pallets included Further information and technical data available on request.

Sąlyga: naudotas, Gamybos metai: 1955, Saw blade diameter: 70 – 230 mm Saw blade width: 12 mm Saw blade bore: 10 – 50 mm Grinding wheel diameter: 120 mm Grinding wheel width: 6 mm Dedpfx Ajtqqk Nof Hewc Grinding wheel bore diameter: 32 mm Number of teeth range: 30 – 400 Total connected load: 0.33 kW Machine weight approx.: 350 kg Space requirement approx.: 0.80 x 0.70 x 1.70 m

Sąlyga: paruoštas naudoti (naudotas), Heller B 23, Heller 20.003 card, used, in good condition, 100% fully functional Dwedpfx Asi Ea Eqef Hoc

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 17 529 h, tekėjimo ilgis: 500 mm, ašies variklio galia: 30 000 W, General Information Year of manufacture: 2017 Operating hours: 17,529 Control system: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to (mm): 500 Max. swing diameter (mm): 200 Dodjwgnigspfx Af Howc Traverse over center (mm): 25 Max. clamping diameter (mm): 100 Tenon diameter (mm): 30 – 60 Working Area Longitudinal stroke Z-axis (mm): 602 Longitudinal stroke Z-/W-axis (mm): 602 / 602 Cross stroke X-axis (mm): 140 Cross stroke X-/U-axis (mm): 140 Steady rest Z3-axis: dependent on chuck Workpiece C21-/C22-axis (degrees): 360 Tooling Outside diameter (mm): 230 Tool Holder Quick-change system Tool Turret Bearing Diameter at front bearing (mm): 660 * 790 Chuck Mount Cylindrical (mm): 180 Max. chuck diameter (mm): 260 Workpiece spindle bearing diameter at front bearing (mm): 170 Guide System for Machining Units Roller guides, size 45 Feed Drives Cross-slide adjustment W-axes, Z-axis 100% DC: Nm: 18 / 18 Tool feed U-axis, X-axis 100% DC: Nm: 18 / 18 Steady rest Z3-axis 100% DC: Nm 10.5 Clamping head right Z4-axis 100% DC: Nm 10.5 Rotational feed workpiece C21-axis, C22-axis 100% DC: Nm 18 / 18 Axis Speed Feed/rapid traverse velocity longitudinal (W-, Z-, Z3-axes): m/min: 0 - 40 Feed/rapid traverse velocity cross (U-, X-axes): m/min: 0 - 20 Feed/rapid traverse velocity Z3-axis (steady rest): m/min: 0 - 40 Rotational feed workpiece C21-/C22-axis: 1/min: 0 – 60 Milling Drive Power per unit (nominal / max.) kW: 15 / 30 Cutting speed (m/min): 120 - 255 Torque at tool (Nm): 1500

Sąlyga: naujas, Heller uniPro SL90-F CNC card A 23 in sealed original packaging, 100% functional Dwodpei Ea Hnefx Af Hec

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 17 349 h, tekėjimo ilgis: 500 mm, ašies variklio galia: 30 000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control: SINUMERIK 840D sl Maximum Workpiece Dimensions Workpiece length up to mm: 500 Max. swing diameter mm: 200 Travel above center mm: 25 Max. clamping diameter mm: 100 Journal diameter mm: 30 – 60 Working Area Longitudinal travel Z axis mm: 602 Longitudinal travel Z-/W-axis mm: 602 / 602 Cross travel X axis mm: 140 Cross travel X-/U-axis mm: 140 Steady rest Z3 axis: dependent on chuck Workpiece C21-/C22-axis degrees: 360 Tool Outer diameter mm: 230 Tool Holder Quick-change system Tool Drum Bearing Diameter Front bearing mm: 660 * 790 Chuck Mounting Cylindrical mm: 180 Chuck diameter up to mm: 260 Workpiece spindle bearing diameter Front bearing mm: 170 Guideway System for Machining Units Roller guideways, size 45 Feed Drives Cross slide adjustment W axes, Z axis 100% duty cycle Nm: 18 / 18 Tool feed U axis, X axis 100% duty cycle Nm: 18 / 18 Steady rest Z3 axis 100% duty cycle Nm: 10.5 Tailstock right Z4 axis 100% duty cycle Nm: 10.5 Rotary feed workpiece C21 axis, C22 axis 100% duty cycle Nm: 18 / 18 Axis Speed Feed/rapid traverse – longitudinal W, Z, and Z3 axes m/min: 0 - 40 Feed/rapid traverse – cross U axis, X axis m/min: 0 - 20 Feed/rapid traverse – Z3 axis (steady rest) m/min: 0 - 40 Dsdpowgnfuefx Af Howc Rotary feed workpiece C21 axis, C22 axis 1/min: 0 – 60 Milling Drive Power per unit (rated / max) kW: 15 / 30 Cutting speed m/min: 120 - 255 Torque at tool Nm: 1,500

Sąlyga: naujas, Heller Uni Pro ACPU90-S8M E 23 < unused > in sealed original packaging, 100% functional Dwsdpfx Aoi Ea Eief Hoc

Sąlyga: naujas, Heller CANCPU A 23 Uni Pro PLC 90 < unused > 100% fully functional Dodoi Ea Exspfx Af Hswc

Sąlyga: naujas, Heller SYS90-F C 23 Uni Pro CNC 90 < unused > 100% fully functional Dwsdji Ea E Uepfx Af Hec

Sąlyga: naujas, Heller SYS90-F C 23 Uni Pro CNC 90 < unused > 100% functional Dodsi Ea Hcopfx Af Hjwc

Sąlyga: naujas, Gebr. Heller uni-Pro DIGI-Drive E3 23.020212 X VPS 30A-N12, unused, in sealed original packaging, 100% functional Dwjdoi D U Sfepfx Af Hjc

Sąlyga: naujas, Heller CPU91 E93 H 23 Uni Pro PLC 90 < unused > 100% functional Dedpfx Aji Ea E Hef Hswc

Sąlyga: naujas, Heller uniPro SIO B 23.032298X-02813 CNC card < unused > in sealed original packaging, 100% functional Dodpoi Ea Hkofx Af Hswc

Sąlyga: paruoštas naudoti (naudotas), Heller XGC90 H 23 Uni Pro CNC 90 graphics card, used, 100% fully functional Dsdpfx Asi Ea Hvjf Howc

Sąlyga: paruoštas naudoti (naudotas), Heller PLT 90 uni-Pro CNC 90 control panel / operating panel SN: 00214 – without key, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dwjdstyr Avopfx Af Hjc

Sąlyga: naujas, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional Dedpfei Ea Emsx Af Hjwc

Sąlyga: naujas, Heller CANCPU A 23 Uni Pro PLC 90 < unused > 100% functional Dedpfxei Ea Euo Af Howc