Hauler Lt Wide Wall pirkti naudotą (66 231)

Sąlyga: naujas, Gamybos metai: 2025, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Cedpfxecr S Ece Admehf Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Sąlyga: naudotas, BOGMA plačiajuostis šlifuoklis, Tipas: KFY-M, Numeris: A0091, 2 agregatai: pirmasis - guminis volas, antrasis - šlifuojantis batas Chsdpfx Aexrzudodmof

Sąlyga: naudotas, Gamybos metai: 1996, Darbinis plotis: 1100 mm Darbinis aukštis: 140 mm Min. ruošinio ilgis: Aukščio reguliavimas: elektrinis Ruošinio storio rodymas: skaitmeninis Agregatai: 1 Csdpoxwnh Ujfx Admohf 1-asis agregatas: Kombinuotas agregatas (volas - padas) su elektroniniu segmentiniu šlifavimo padu Elektroniškai valdomas segmentinis spaudimo balkis: CPS sistema, elemento plotis 50 mm Valymo šepetys: Taip Padavimo greičiai: 2 Šlifavimo juostos matmenys: 1120 mm x 1900 mm Šlifavimo juostos variklio galia: 11 kW Ištraukimo jungtis: 160 mm, 140 mm Staklių ilgis: 1800 mm Staklių plotis: 1800 mm Svoris: 1500 kg

Sąlyga: naudotas, Gamybos metai: 1992, bendras plotis: 2 100 mm, bendras aukštis: 2 200 mm, bendras ilgis: 2 150 mm, darbinis plotis: 1 360 mm, bendras svoris: 2 600 kg, galia: 11 kW (14,96 AG), No. 04504 Wide Belt Sander Ott ALPHA 136 Used, Year of manufacture 1992 Maximum working width: 1,360 mm Workpiece thickness: 3 - 160 mm Abrasive belt dimensions: 2,150 x 1,380 mm Belt speed: 18 m/s Feed speed: 4 / 8 m/min Cedpfxoxwqkxo Admohf Sanding unit motor power: 11 kW Electronic belt oscillation Hard rubber contact roller, 150 mm diameter Combination sanding unit with contact roller and sanding shoe For calibration and fine sanding Fixed sanding shoe for solid sanding and additional pneumatic sanding shoe for veneer sanding Feed belt with automatic centering Brush roller Grit compensator for contact roller, 4-way Semi-automatic workpiece thickness detection Extraction port diameter: 1x 150 mm / 1x 120 mm Operating pressure: 6 bar Machine ready for connection with cable and 16 A plug Technical documentation available Transport dimensions approx. 2,150 x 2,100 x 2,200 mm (LxWxH) Weight approx. 2,600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made as is. Technical data, description of condition, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. Warranty is excluded for used machines; the following applies: “sold as inspected.” Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery terms: ex stock

Sąlyga: geras (naudotas), Kodas: 0249 Prekės ženklas: SCM Modelis: SANDYA 3 - RCS - CE Standartas Automatinė dviguba kalibravimo ir šlifavimo staklės, skirtos stalių dirbtuvėms, baldų, nestandartinių interjero detalių, medinių langų rėmų, plokščių ir įvairių medienos ruošinių apdirbimui – atitinka CE standartą. Techniniai duomenys: Darbinis plotis: 950 mm Min./maks. darbinis storis: 4/170 mm Šlifavimo juostos matmenys: 1900 x 970 mm Variklio galia: 10 AG Chodpfxoxz Hcrj Admof Juostos padavimo greitis: 4,5/9 m/min 1-oji grupė: Plieninis kalibravimo volas 2-oji grupė: Kombinuota grupė su 45 Shore kietumo guminiu šlifavimo volu – apdailos padas Automatinis stalo pozicionavimas Darbo storio skaitmeninis ekranas Įėjimo ir išėjimo ritininiai konvejeriai Suslėgtas oras: 7-8 bar Ištraukimo angos skersmuo: 140 mm Bendri matmenys: 1350 x 1600 x 2000 h (mm) Svoris: 970 kg

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 100 mm, galia: 11 kW (14,96 AG), aukščio reguliavimo tipas: elektrinis, Atnaujinta automatinė plataus juostos kalibravimo šlifavimo staklė skirta masyvinės medienos kalibravimui ir faneruotų detalių šlifavimui. Modelis SANDYA 10 priklauso aukštesnei SCM plataus juostos šlifavimo staklių klasei, pasižyminčiai ypač standžiu rėmu, aukščiausia šlifavimo kokybe ir universaliu panaudojimu. 2 agregatai: volelis + volelis su padu ir bendru 11 kW varikliu 1. Kalibravimo volelis – plieninis 2. Šlifavimo volelis – minkšta guma + pneumatinis šlifavimo padas Šlifavimo plotis 1100 mm 2 padavimo juostos greičiai Automatinis ruošinio storio matavimas Variklinis darbinio storio nustatymas su indikacija + precizinis reguliavimas Įeinančio ir išeinančio stalų pailginimai Pneumatinė osciliacija Labai gera techninė būklė + pilnas atnaujinimas Cedpfx Adjwx I Tpemshf Yra instrukcija čekų kalba Tinka masyvios medienos ir faneruotų detalių kalibravimui bei šlifavimui Staklė atnaujinta, sureguliuota ir išbandyta.

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Cjdpfx Adjcnw U Rjmohf Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: NOH375-48, 1 ABUS LW sieninis pasukamas kranas, naudingoji apkrova/pakeliamoji galia 250 kg Išsikišimas 7 m, naudingoji apkrova 250 kg Su ABUS GM grandinine keltuvu, naudingoji apkrova 250 kg Svoris su sienine konsole apie 350 kg Pilnai komplektuotas: grandininis keltuvas, kabelių grandinės vežimėlis, važiavimo vežimėlis ir smulki medžiaga Sukimosi sritis 270° Yra patikros knyga Prekės vieta: 75053 Gondelsheim Įranga visiškai išmontuota ir paruošta naudojimui Pristatymas per ekspeditorių arba atsiėmimas Csdpfx Aexz Tuzsdmohf Pristatymo kainą teiraukitės pagal pašto kodą

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Mašina de calibravimui Costa Chedpfx Ajwmxh Tedmjf

Sąlyga: geras (naudotas), Gamybos metai: 1995, Working width 1100 mm Number of sanding units: 1 pc. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1120 x 2150 mm Sanding drum motor power: 15 kW Feed motor: 1 kW Feed speed: 2.5 - 13 m/min Weight: 2600 kg - Combined contact roller and sanding pad unit - Segment pressure beam, segment width 50 mm - Infinitely adjustable edge pressure - 3-speed switchable drive motor - Workpiece-controlled belt blow-off device - Infinitely variable feed - Roller table at infeed and outfeed - Cleaning brush at machine outfeed Chjdpfx Adeulncuemsf - Paint sanding equipment

Sąlyga: beveik kaip naujas (parodų įrenginys), Demonstracinis įrenginys: Darbinis volas dengtas guma (90 Sh), motorizuotas stalo pakėlimas, automatinis perjungimas - žvaigždė/trikampis, ampermetras srovės matavimui, šlifavimo juostos osciliacija, mechaniškai reguliuojamas šlifavimo batukas, elektroninis stalo padėties matavimas su skaitmeniniu rodmeniu, guma dengtas spaudimo volas. Triukšmo izoliacija ir CE sertifikatas! Techniniai duomenys: Šlifavimo juostos ilgis 1900 mm Stalo judėjimo greitis 4,5/9 m/min Variklio nominali galia S1 11 kW Chodpfsvrvwdex Admef Šlifavimo plotis 1100 mm Šlifavimo volo skersmuo 120 mm Šlifavimo volo kietumas 90 Sh Plotis 1660 mm Aukštis be ištraukimo jungties 1800 mm Aukštis su ištraukimo jungtimi 2130 mm Papildoma įranga į kainą neįskaičiuota (Paveikslėlis simbolinis)

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Atnaujinta, automatinė plataus juostos šlifuoklė, tinkama masyvinės medienos kalibravimui ir faneruotų ruošinių šlifavimui. Sandya priklauso prie kompaktiškos SCM automatinių plataus juostos šlifuoklių serijos, išsiskiriančios ypač tvirtu ir standžiu rėmu bei puikia šlifavimo kokybe. 2 agregatai su 11 kW varikliais 1. Kalibravimo volas – plieninis 2. Šlifavimo volas – pusiau kieta guma + pneumatinis padas su automatinio pakėlimo/nuleidimo funkcija Šlifavimo plotis: 920 mm Chodpfxevxt D Ie Admof Darbinis storis: 3 – 160 mm 2 padavimo juostos greičiai: 4,5 ir 9 m/min Darbinio storio motorizuotas nustatymas su parodymu Ampermetras variklio apkrovai rodyti Oro suvartojimas: 200 l/min Nusiurbimo poreikis: 3000 m3/val Stalų prailginimai Pneumatinė osciliacija Matmenys: plotis 1460 x gylis 1700 mm x aukštis 1750 mm Svoris: 1100 kg Puiki techninė būklė Galimas naudojimo vadovas čekų kalba Įrenginys pilnai atnaujintas, sureguliuotas ir ištestuotas.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Compact wide belt sanding machine with combination sanding unit With special action equipment - Top condition - Chodpfx Ajxac E Hjdmjf Special Action Equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine height adjustment of the working table Clear control panel on the front Robust, tube-reinforced monoblock steel machine body, robot-welded, work units mounted high up for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Conveyor belt feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical Data Length (product) approx. 1388mm Height (product) approx. 1668mm Width/depth (product) approx. 1545mm Extraction connection Extraction nozzle diameter 140mm Electrical data Supply voltage 400V, AC Phase(s) 3Ph Supply frequency 50Hz Feed motor power 0.33 / 0.55kW Height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm Sanding width max. 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Workpiece height min. 4mm Workpiece height max. 170mm Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2004, mašinos/transporto priemonės numeris: NOH373-27, 1 Vetter / Demag sieninis svirtinis kranas, keliamoji galia 250 kg Tipas UW2,5-6.0 Išsikišimas apie 6 m, keliamoji galia 250 kg (0,25 t) Su grandininiu keltuvu, keliamoji galia 250 kg (2 kėlimo greičiai) Bendras svoris apie 250 kg Pagaminimo metai 2004, su patikros knyga Pilnai su sieniniu laikikliu, strėle, grandininiu keltuvu, kabelio laikikliu, važiuokle ir smulkiomis detalėmis Sukimosi diapazonas apie 180° Prekės vieta: 75053 Gondelsheim Įrenginys pilnai išmontuotas, iš karto prieinamas Žiūrėti nuotraukas Siuntimas per pervežimo įmonę arba atsiėmimas vietoje Chsdjxz Tqpjpfx Admjf Pristatymo kainą teirautis pagal pašto kodą

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. Cedpfjxp Hvnjx Admjhf 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) - For removal of static charge, incl. high-voltage transformer 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. If you have any questions, I am available. Paweł Szczepański +48 795 517 258

Sąlyga: naudotas, Bütfering Optimat SCO 113 - Diamond C + LACQUER CONSTANT TABLE MACHINE / automatic head adjustment Stable frame construction with constant workpiece infeed height of 900 mm by adjusting the machine upper section. Workpiece thickness settings from 3 - 160 mm 1st Unit: combined steel contact roller and electronically controlled segmented pad sanding unit (CPS II system) with variable sanding pressure 2nd Unit: cleaning brush unit Robust VACUUM TABLE for high-area support Secure transport ensured by vacuum clamping device – high-performance blower with control flap integrated into the machine frame. Table segmentation can be activated via terminal Extendable workpiece support Working width: 1350 mm Continuous feed speed adjustment: 2.5 – 13 m/min LACQUER SANDING PACKAGE: Vacuum table with lacquer mat and 3 kW vacuum generator Infinitely variable belt speed for lacquer sanding: 2 – 18 m/sec Oscillating belt discharge for 1350 mm working width Motor power 1st unit: 15 kW Motor power 2nd unit (cleaning brush unit): 1.5 kW 14" touchscreen control for automation and management of all work programs Codsxur Iyspfx Admohf Machine is FACTORY-REFURBISHED and in TOP CONDITION Available ex-stock Lieboch

Sąlyga: naujas, Universalus šlifavimo staklės medienai ir fanerai šlifuoti. 2 spaudimo volai su gumine danga ir šlifavimo bateliu, elektrinis stalo aukščio reguliavimas, automatinis žvaigždė-trikampis perjungimas, ampermetras, infraraudonaisiais spinduliais valdoma šlifavimo juostos osciliacija, skaitmeninis aukščio indikatorius, stalo pozicionatorius. CE patikrinta ir su triukšmo slopinimu. Automatinis stalo kilimėlio centravimas. Csdpfxsvrv Hlj Admohf Techniniai duomenys: Variklio galia S1: 11 kW Padavimo greitis: 3–15 m/min be laiptelių Šlifavimo juostos matmenys: 1900 x 1120 mm Šlifavimo volo skersmuo: 160 mm Darbinis aukštis: 3–160 mm Priedai į kainą neįskaičiuoti. (Simbolinė nuotrauka)

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Nauja pločio juostinė šlifavimo mašina medžio plokštėms (įskaitant dulkių ištraukimo sistemą) Chsdpfjxxlz Ujx Admef

Sąlyga: naujas, Gamybos metai: 2025, Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. Structuring Unit Robust 3-belt wide belt sander for the highest demands. Constant working height thanks to upper section adjustment. Working width: 1350 mm Pass-through height max.: 205 mm (up to 18.5 kW main drive motor) Abrasive belt size for "R" and "Ed-L": 1350 x 2000 mm Abrasive belt size for "Xi-L": 150 x 4700 mm "R" Unit - Contact roller: ➢ Grooved rubber contact roller, hardness 80 Sh ➢ Contact roller height infinitely adjustable via touchscreen ➢ Motorized raising/lowering of contact roller according to selected unit ➢ Increased sanding belt speed "Ed-L" Unit - Diagonal sanding pad: ➢ Electronic sanding pad with segment width 22 mm (pivoting special model), with variable edge pressure, automatic pressure regulation, and memory function for sanding pad segments ➢ Infinitely adjustable sanding belt speed (with PLC memory) ➢ Additional sanding pad insert "Xi-L" Unit - Cross sanding unit in the machine frame: ➢ Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure regulation, and memory for sanding pad segments ➢ Cross sanding belt supported by lamella belt ➢ Infinitely adjustable sanding belt speed (with PLC memory) Perfect-3 1350-REdXi-LL • Main Motors: Csdpfx Ajr Hr Dzedmehf ➢ 1st unit: 18.5 kW (25 HP) ➢ 2nd unit: 11 kW (15 HP) ➢ 3rd unit: 16 kW (MPM) (22 HP) 400 V/50 Hz • Workpiece Feed: ➢ Fabric-reinforced rubber feed belt ➢ Rubberized belt drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: stepless 3 - 15 m/min • Vacuum System: ➢ On feed table ➢ Additional perforation of feed belt over 200 mm ➢ Vacuum generator: 2.2 kW (3 HP) / 400 V/50 Hz • Abrasive Belt Cleaning: ➢ Air knife for cleaning the sanding belt on both units "Ed-L" and "Xi-L", operation controlled, with suction channels and blower drive 1.1 kW (1.5 HP) 400 V/50 Hz • Pressure Elements: ➢ Infeed: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm ➢ Between units: rubberized pressure roller ⌀ 50 mm ➢ Outfeed: rubberized pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 sh. 2. Diagonal sanding pad with lacquer equipment and air knife for belt cleaning 3. Cross sanding unit with lacquer equipment and air knife for belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional Equipment: W61: Structuring unit at outfeed B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5x motorized control dampers (2x D=180 + 3x D=150) Working width: 1350 mm Max. pass-through: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10" touchscreen with Industry 4.0 control Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, mašinos/transporto priemonės numeris: NOH372-43 // 374-48, 1 Vetter / Demag sieninis sukamasis kranas, naudingoji apkrova 250 kg Kranas yra 2x !!! Tipas: PW2,5-6.0 Chjdpfx Adjxz Tmkomef Išsikišimas apie 6 m, naudingoji apkrova 250 kg / 0,25 t Su grandinine kėlimo sistema, naudingoji apkrova 250 kg (2 kėlimo greičiai) Bendras svoris apie 250 kg Pagaminimo metai: 2006, su patikros žurnalu Komplekte: sieninė konsolė, strėlė, grandininis keltuvas, kabelių vediklis, važiuoklė ir smulkios detalės Sukimosi kampas apie 180° Prekės vieta: 75053 Gondelsheim Įrenginys visiškai išmontuotas ir iš karto prieinamas Žiūrėkite nuotraukas Pristatymas per ekspeditorių arba atsiėmimas vietoje Siuntimo kainą prašome tikslinti pagal pašto kodą

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Cedpfx Aeu Hlzfodmjhf Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.

Sąlyga: naujas, 1. Steel roller diameter (mm): 120 Chsdefhmgcopfx Admjf 2. Rubber-coated working roller diameter (mm): 160, 455 operating hours Sanding belt (mm): 1120 x 2200, 1 piece per sanding unit Main motors (kW): 2 x 11 (15 HP) Motorized table lift - workpiece height (mm): 3 - 160 Automatic star-delta motor start Lifting of sanding rollers for 1st unit from the front control panel - pneumatic Lifting of sanding rollers for 2nd unit from the front control panel - pneumatic Pneumatic sanding pad PL 2 Ammeter - for monitoring the current of the sanding unit motors Sanding belt oscillation control - via optoelectronic infrared beam sensor Automatic feed belt centering Table positioner Electronic measurement of table position with digital display Frequency converter for feed belt speed (m/min): 3 - 15 Rubber-coated pressure rollers Emergency stop - pneumatic disc brake for main motor Mechanical limitation of maximum material removal per workpiece Noise protection Power supply: 400 V / 50 Hz Machine built according to CE electrical and safety standards Additional equipment available on request

Sąlyga: beveik kaip naujas (parodų įrenginys), Pagrindinė įranga apima: 120 mm plieno volai su reguliuojama šlifavimo pado dalimi Elektriškai reguliuojamas stalo pakėlimas Automatinis stalo padėties matavimas Šlifavimo juostos centravimas infraraudonųjų spindulių jutikliu Padavimo greičiai 4,5 m/min + 9 m/min Elektromagnetinis variklio stabdis Žvaigždės-trikampio jungiklis Csdjvrvvmopfx Admehf Ampermetras apkrovos indikavimui 5,5 kW variklio galia prie 100% ED Šlifavimo juostos ilgis 650/1600 mm Svoris: 670 kg CE sertifikuota Papildoma įranga į kainą neįskaičiuota (Simbolinė nuotrauka)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Chsdpfx Adsgf Sw Njmjf Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, mašinos/transporto priemonės numeris: NOH371, 1 Vetter PV sieninis sukamasis kranas, naudingoji apkrova 250 kg Csdpfoxz Tmdox Admjhf Išsikišimas 3 m, naudingoji apkrova 250 kg Su grandininiu keltuvu, naudingoji apkrova 250 kg Svoris su sienine konsolė apie 200 kg Pilnai komplektuotas: grandininis keltuvas, kabelių vediklis, važiuoklė ir smulkios detalės Sukimosi diapazonas 270° Prekės vieta: 75053 Gondelsheim Įranga visiškai išmontuota ir iš karto prieinama Siuntimas per ekspeditorių arba atsiėmimas vietoje Siuntimo kainą prašome teirautis pagal pašto kodą