Granulės pirkti naudotą (531)

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Pal 1600, galia: 180 kW (244,73 AG), įėjimo įtampa: 380 V, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, 1 Pellet press brand: Paladin 1600-210 Die inner diameter: 850 mm Gedoq U R N Tepfx Ac Djir Die working surface: 210 mm The press is equipped with 2 motors, each 90 kW, n=1500 rpm. Press door is made of stainless steel and features an overload flap in the door. 3-roller press, with 3 rollers on the press revised in either bored or corrugated versions. The press comes complete with die hoisting device and tooling. The press has been fully overhauled and fitted with new bearings and wear parts such as front and rear scrapers, die spacer ring, etc. Also fitted with new V-belts and toothed timing belts. All safety measures are observed, with appropriate switches for: Friction protection, door switch, and inspection hatches are installed. Overhauled pump unit for friction and V-belt tension. Note: Conditioner on the press is optional.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 990 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 3 900 mm, įėjimo srovė: 63 A, bendras ilgis: 9 500 mm, bendras plotis: 4 500 mm, galia: 15 kW (20,39 AG), Įranga: dokumentacija / vadovas, Pelletizing plant suitable for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn straw, etc.), as well as feed materials. This is a complete system mounted on a base frame and consists of the following components: - Raw material storage container, 4m³, including agitator. This has been extended with wooden panels to approximately 3-4m³. - Intermediate screw conveyor to the hammer mill - Hammer mill, 11 kW, for shredding wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing unit, and level monitoring - Dosing container for press additives, feeds into the inclined mixer - Dosing screw for optimal material feeding to the pellet press (speed controlled) - Pellet press, 15 kW, including full sensor, temperature monitoring, and discharge chute - Conveyor belt to the dedusting sieve - Dedusting sieve with material discharge at 3m height The plant is designed for easy expansion with a second 15 kW press. The entire system is centrally controlled via a Siemens PLC with touch display. All operating parameters are monitored, and the press will shut down automatically in the event of a fault. Gsdsxv Dkcjpfx Ac Deir Remote operation and monitoring of the press is possible via any PC. The chip dryer shown on picture 2, mounted on the wall with discharge and control system, can also be purchased. For further details, please contact us.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, pavaros tipas: elektrinis, valdymo tipas: PLC valdomas, automatizacijos lygis: automatinis, PELLET PRODUCTION PLANT 2 TON/H COMPLETE WITH BELT DRYER Giodpfx Acew Ebx Se Dsr

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, Used pellet production plant, capacity 2.5 tons per hour, complete with belt dryer. Gisdpfx Aowk Htxjc Der

Būklė: naudotas, Granuliatorius CPM 9042-12 su daug atsarginių dalių Gijdpfjw Saayox Ac Dor

Būklė: naudotas, Granuliatorius CPM 7930, 762 mm matrica pjuvenoms. Variklis 200 arba 250 kW, gali būti ir 132 kW. Našumas 2-3 t/h. Giedpfx Acjxmu Dne Der

Būklė: labai geros būklės (naudotas), Granuliatorius Vomm 90kW labai geros būklės Godpsxmu E Ejfx Ac Djir

Būklė: naudotas, Siūlome pakabinamą smėliavimo įrenginį Schlick HB 16/22-5,4-3/7,5. Godpfxjy Abp Ss Ac Djir Maksimalūs gaminio matmenys – plotis 1600 mm, aukštis 2200 mm, maksimali gaminio masė – 800 kg. Filtras – 22 m3/val. 3 x turbinos – 15 kW, turbinos skersmuo – 325 mm Bendras įrenginio galingumas – 56,74 kW. Galima išbandyti įrenginį. Pridedama visa dokumentacija.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, GKM-200 feed pelletizer for processing loose feeds into pelleted feed with a rotating die and stationary rollers. Gisdpfx Aowk Il Noc Djr Length: 900 mm Width: 600 mm Height: 1200 mm Weight: 168 kg Die hole diameter: from 2 to 8 mm (selectable) Output capacity: up to 200 kg/h of feed Motor power: 5.5 kW Voltage: 400 V Die diameter: 205 mm European-made product directly from the manufacturer, warranty included, spare parts available. Net purchase with VAT number. Collection in person or shipment upon agreement. It is possible to view and test the machine before purchase.

Gamybos metai: 2009, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Naudotas Frewitt MF3 nerūdijančio plieno osciliacinis granuliatorius. Gsdpfeyzhm Uex Ac Deir - Gamintojas: FREWITT (Šveicarija) - Modelis: DM - MF 3 - Pavara: 1,1 kW, mechaninė variatoriaus pavarų dėžė, išėjimo greitis 48-257 aps./min. - Apsauga: Atex sertifikuota, Dulkių grupė: viduje II 1D, išorėje II 2D, IP65, T3=200°C - Kita: Sumontuotas ant nerūdijančio plieno stalo.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Sandėlio nr.: 2858 1 naudota, dalinai perrinkta ir patikrinta veikimo atžvilgiu kompaundavimo-granuliavimo linija, susidedanti iš: Ekstruderis Krauss Maffei / Berstorff Modelis ZE 60 A - 34 L/D, dvinavis, bendrakryptis Ekstruderio variklis 160 kW AC Nuorintojas su vakuumine pompa Lazerinė atraminė galvutė / lydalo filtras Lydalo siurblys Eprotec Melt x10 ECON EUP 600 po vandeniu veikiantis granuliatorius, pilnai su paleidimo vožtuvu Vandens sistema Granuliato džiovinimo centrifuga >> 1 metų PLASTICO garantija PAPILDOMAI už papildomą kainą: Medžiagos transportavimo įrenginys Gravimetriniai dozatoriai Granuliato rūšiavimo sistema Granulių pakavimo stotis į didmaišius arba oktabinus Gedpfsy At Iaox Ac Dsir Kita kompaundavimo įranga, granuliavimo sistemos, gravimetrinės dozavimo sistemos iš Wuppertal sandėlio. Aplankykite mus arba siųskite užklausą.

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 2586k,

Būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Gjdpfxjh Eyd Rj Ac Dsir Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Gijdpjiyyf Iofx Ac Der Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Gamybos metai: 2000, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no.: 2107 Giedsiyyc Espfx Ac Djr 1 used, partially overhauled and function-tested strand pelletizer COMAC Model SG-100 SV Strand inlet width: 100 mm Cutting rotor width: 110 mm Parallel cut rotor with 32 teeth Rotor diameter: 200 mm >> Adjustable strand pellet length Two drives: 1x for cutting rotor – 4 kW 1x for feed roller – 1.5 kW with STÖBER reduction gearbox Sound-insulated housing for granulation chamber Inspection / test run possible by appointment soon. We also have suitable strand cooling troughs, strand blowers, and grading sieves available from stock. Further strand pelletizers and other granulation systems/plants available from stock (water ring, hot die-face, and underwater pelletizing systems).

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Strand Pelletizer Alphatec Model AS-G 200 Gisdpfscpg Rqex Ac Djr Carbide Cutting Rotor Pneumatic Pressure Infeed Width / Rotor: 200 mm Drive: 7.5 kW AC, speed frequency controlled Throughput up to approx. 700 kg/h (material dependent) Further strand pelletizers (ST) available ex works Wuppertal. Please ask for our current stock list or visit us.

Gamybos metai: 1996, būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 1624 Throughput capacity: 500 kg/h Drive: 4 kW Rotor width: 200 mm Rotor double bearing Sound insulation Type: Strand, spaghetti granulator Material: PP, PE, PS, PET, PC, PA, various materials Gisdpfoby I Syox Ac Djr Working width: 200 mm OPTIONAL for an additional charge: Adjustable cut length available on request. Further strand pelletizers available for immediate demonstration from our Wuppertal warehouse.

Būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area Gjdsi Dtb Ujpfx Ac Dsir BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 500 kg/h depending on material, comprising: - Kreyenborg stuffing unit SW 100, drive 7.5 kW - BKG single screw extruder Ø 100 mm – 35 L/D, drive 132 kW – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating power approx. 35 kW - 1x atmospheric degassing zone (vacuum pump optional at extra cost) - Screen changer double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² - BKG underwater pelletizer AH 300, complete with: - Start-up valve incl. hydraulic station - Pelletizer with 4 kW drive - Water pump 2.2 kW - By-pass system, water tank with 9 kW installed heater plus heat exchanger - BKG centrifugal dryer TWE 300 with 3 kW drive - Pellet classifier screen - Control cabinet with Siemens touch panel (updated) Godpfxod Sg I Ie Ac Deir OPTIONAL at extra cost: ᐳ Vacuum pump ᐳ Material conveying system, big-bag station ᐳ Process water chiller / temperature control Further pelletizing lines available ex Works Wuppertal, ask for our current machine stock list or visit us.

Būklė: naudotas, Infeed: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4 Godpoy Aucxofx Ac Djir

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size. Gisdjy Aucrepfx Ac Der

Būklė: naudotas, Refurbished heavy-duty granulator, wear-protected. Suitable for dry and wet size reduction. Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste. Gisdpfx Acey Auadj Der Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with exchangeable knife support systems Drive power: 160-250 kW With forced material feed via 3 load-dependent controlled feed screws Hydraulically opening mechanism, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and particle size.

Būklė: naudotas, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9 Giedpfey At U Tox Ac Djr

Būklė: naudotas, Granulator (Cutting Mill) Manufacturer: CONDUX Model: CS 300/600-4 WK Rotor: 300 mm diameter x 600 mm width 3 rotor blades, open rotor tHousing with 4 stator blades Gedpfxoy At Uyj Ac Deir Equipped with 11 kW drive motor (up to 30 kW available on request)

Būklė: naudotas, Gamintojas CONDUX Tipas CS 450/600-2 Tuščiavidurių korpusų smulkinimo malūnas ir tolesnio smulkinimo malūnas iš anksto susmulkintai medžiagai Rotorius: 450 mm skersmens x 600 mm darbinio pločio Gedpfxoy At Tpo Ac Dsir 5 rotoriaus peiliai (įstrižas pjūvis), 2 statoriaus peiliai Pavaros variklis 22 kW