Granito Lentynos pirkti naudotą (1 378)

Būklė: geras (naudotas), Gamybos metai: 2006, Approx. 100 stable shelf rack bays, Gemac – this system does not require any cross bracing, frame height: 2.48 m or 2.31 m, shelving dimensions: 1.20 m x 1.30 m, 130 kg per level – used: Price per bay ex location: only €95 (net), dismantled, packed and loaded! Price from a minimum purchase of 100 bays: Per bay ex location: only €85 (net), dismantled, packed and loaded! Manufacturer: Gemac Model: presumed to be Normaflex Hedpfx Aley D Tm Senol Year of manufacture: 2006 Frame height: approx. 2.48 m Bay depth: 1.20 m Bay width: approx. 1.31 m (incl. frames, 2 bays are approx. 2.74 m wide) Shelves: Shelf load per level: 120 kg Maximum bay load: 850 kg Shelves per bay: 6 incl. the top shelf, which can also be used for storage The 6 shelves/levels consist of 3 full-length large shelves and 3 levels with narrower shelves (which together also form a large surface) Retaining clips for the shelves must be purchased new if required by the buyer – in normal operation, they are not necessary (the plastic clips usually break during dismantling – metal variants are also available as new accessories) Feet are slotted in and then secured with one screw The top shelf is bolted to the adjacent frame or shelf using a connecting plate (all other components are slotted in), therefore no cross bracing or similar is necessary due to the use of 3 large shelves with stiffeners Available: approx. 100 bays immediately, for assembly: 25 x 4 bays Condition: good – very good Location: D-77749 Hohberg

Būklė: naudotas, Gamybos metai: 2007, RA1784 Galler OMEGA pallet racking system used, 16600 x 5400 x 1350 mm Installed in a warehouse Racking height: 5,400 mm Racking depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with stored items Depth storage: 1,350 mm Storage configuration: 1. Goods stored on the floor 2nd to 5th goods stored on pair of beams, Load capacity per pair of beams with a clear bay width of 3,200 mm and a shelf height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a buckling length of 1,500 mm (min. 4 bays) →All stated load capacities assume evenly distributed loads. Finish: End frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH RUST SPOTS (SURFACE ONLY) Installation: 1 single-sided rack row, positioned against a warehouse wall 5 x 3,300 + 100 = total length 16,600 mm Consisting of: 6 Galler Omega upright frames, bolted 5,400 x 1,350 mm 40 Galler Sigma beams 3,200 mm 80 locking pins Price net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional on request: 2 used corner rack protectors Installed at the beginning/end and in drive-through areas as protection for the rack uprights For individual, expert advice, simply contact us. Hodpfxjk Abbbs Alnol Get in touch with us by phone or email. We are happy to assist you with the planning and realisation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your expert partner for intralogistics

Būklė: paruoštas naudoti (naudotas), Johann Fischer 2000mm x 2000mm granito matavimo plokštė, matavimo plokštė, granito plokštė, granitas Matmenys: 2000mm x 2000mm x 300mm (ilgis x plotis x aukštis) Aukštis su kojelėmis: apie 860mm Svoris: apie 3500 kg Tikslumas: DIN 876/1 Hsdpfxsy Iapue Alnjl Kokybės klasė: 1 Lygumas: faktinė nuokrypa 0,0155; leistina nuokrypa 0,030 Kalibravimo temperatūra: +20 °C Laukiame Jūsų atvykstant apžiūrai. Pagal pageidavimą galime organizuoti ekonomišką transportavimą per ekspedicijos įmonę! Bus išrašyta tinkama sąskaita. Užsienio klientams galime pateikti gryną sąskaitą be PVM. Būtina galiojanti PVM mokėtojo kodas. Pasiliekame teisę prekę parduoti kitam pirkėjui. Aplankykite mūsų parduotuvę ir peržiūrėkite kitus mūsų pasiūlymus. Minimi prekių ženklai ir įmonių pavadinimai priklauso jų savininkams ir yra naudojami tik identifikavimo ir produkto aprašymo tikslais. Galimi techninių duomenų nuokrypiai bei aprašymo klaidos, jos nėra privalomos.

Būklė: naudotas, Naudota sandėliavimo lentyna yra tvari, lanksčiai pritaikoma sprendimas įvairių prekių tvarkingam laikymui. 1055 × 640 × 2200 mm matmenys užtikrina didelę sandėliavimo talpą kompaktiškoje formoje. Visa konstrukcija pagaminta iš karštai cinkuoto plieno, tai užtikrina puikų Hsdpjx Hugfofx Alnjl

Būklė: naudotas, Naudota, išardoma META lentyna (1350x635x2500 mm) iš cinkuoto plieno yra ilgaamžė ir universali sandėliavimo sistema, tinkanti įvairioms aplinkoms, pavyzdžiui, sandėliams, garažams ar pramoninėms zonoms. Cinkuotas plienas užtikrina puikų atsparumą korozijai, todėl lentyna yra ilgaamžė ir tinka Hedpow Sxvgofx Alnsl

Būklė: naudotas, Naudota, surenkama META lentyna iš cinkuoto plieno yra ilgaamžė ir universali sandėliavimo sistema, tinkanti įvairioms aplinkoms, pavyzdžiui, sandėliams, garažams ar pramonės teritorijoms. Cinkuotas plienas užtikrina puikų atsparumą korozijai, todėl lentyna ilgaamžė ir pritaikoma įvairiomis sąlygomis. Hodpfxsw Sxvyj Alnol

Būklė: naudotas, Naudotas, nuimamas papildomas elementas (1320x635x2500 mm) lentynai su tipo numeriu 7172. Hsdpfx Aow Swzhslnol DĖMESIO: TAI YRA TIK PAPILDOMA DALIS: norint įrengti šią dalį, reikalingas bent vienas pagrindinis elementas (98-7172GB-S1), o vėliau galima neribota plėtra. Ši META sandėlio lentyna yra cinkuota

Būklė: naudotas, Šis lentynų išplėtimas yra praktiškas papildymas prie esamų lentynų sistemų ir siūlo efektyvų sprendimą paprastam sandėliavimo talpos padidinimui. Dėl modulinės konstrukcijos sistemą galima lanksčiai plėsti, taip užtikrinant aiškią ir skalę pritaikomą sandėliavimo sprendimą. Hjdpfx Alsy Hpw Esnel

Būklė: naudotas, Skalbinių vežimėlis su ratukais, 674 litrų – Cinkuotas skalbinių konteineris su 2 lygiais Hedpfx Aley Hpz Renjl Šis skalbinių vežimėlis yra tvirta ir praktiška išeitis didelių skalbinių kiekių transportavimui bei laikymui. Dėl apgalvotos konstrukcijos ir didelės talpos, jis puikiai tinka skalbykloms, viešbučiams,

Būklė: naudotas, Ši stelažų sistemos pradinė dalis yra efektyvus ir ilgaamžis sprendimas tvarkingam prekių sandėliavimui sandėliuose, dirbtuvėse ir logistikos aplinkose. Dėl savo modulinių savybių ir tvirtos konstrukcijos ji puikiai tinka profesionaliam naudojimui ir gali būti lanksčiai pritaikoma prie kintančių sandėliavimo poreikių. Hedpfxsy Hpwrs Alnel

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Bendra leistina apkrova: 15 000 kg, ištraukiamos lentynos apkrova: 3 000 kg, nuosavas svoris: 4 830 kg, bendri stelažo matmenys: apie I/700/P/230/A/255 cm, stelažo lentynos matmenys: apie I/660/P/167 cm, su 5 ištraukiamomis lentynomis. Hjdpsy Hi Dxjfx Alnol

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Parduodamas Hänel vertikalus kompaktiškas paternosteris. Konteinerių skaičius: 67, maksimali vieno konteinerio apkrova: 250 kg, maksimali konteinerio matmenys X/Y: 1300 mm/825 mm, aukščio žingsnis: 75 mm, maksimali bendra apkrova: 20 000 kg. Yra dokumentacija. Galima apžiūra vietoje. Hsdpey Ax Tbsfx Alnsl

Būklė: geras (naudotas), bendras ilgis: 1 000 mm, bendras plotis: 600 mm, bendras aukštis: 2 500 mm, keliamoji galia vienai sandėliavimo sekcijai: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm Hsdpouk E Thofx Alnel • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load: 150 kg • Number of shelves per section: 6 pieces • Surface: galvanized • Boltless assembly • Condition: used Large quantities available for immediate delivery. Tiered net prices per item, plus VAT: Starter section: 1 - 5 sections: €92.30 6 - 20 sections: €88.61 21 - 50 sections: €84.92 from 51 sections: €81.22 Add-on sections: 1 - 10 sections: €63.55 11 - 25 sections: €61.01 26 - 75 sections: €58.47 from 76 sections: €55.92 Available ex stock Nordhorn. YOUR CONTACT PERSONS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional fee. The extra costs depend on the delivery location and the size of the shipment and can be requested directly from us. PAYMENT TERMS Payment conditions are to be agreed upon at the time of order. The price stated is per item/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, feel free to contact us. Connect Four – The four DLK success factors: Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, bendras ilgis: 1 500 mm, bendras plotis: 600 mm, bendras aukštis: 2 000 mm, TECHNICAL DATA • Manufacturer: Metalsistem • Frame height: 2,000 mm • Shelf width: 1,500 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 4 pieces • Finish: galvanized • Condition: used Large quantities available immediately. PRICES: Hodpfjy D Tdkex Alnsl • Starter bay: €74.00 net per unit • Extension bay: €58.00 net per unit Tiered prices, net per unit plus VAT: Starter bays: • 1 - 5 bays: €74.00 net per unit • 6 - 20 bays: €70.30 net per unit • 21 - 50 bays: €66.60 net per unit • from 51 bays: €62.69 net per unit Extension bays: • 1 - 5 bays: €58.00 net per unit • 6 - 20 bays: €55.10 net per unit • 21 - 50 bays: €52.20 net per unit • from 51 bays: €49.30 net per unit YOUR CONTACTS WITH US: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and size of the shipment, and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon on order. The price is stated per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn is a supplier of new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry and the skilled trades. We continuously offer you interesting used items from various manufacturers/brands at attractive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: geras (naudotas), 963 USED Rack Oven, Thermal Oil, Deck Type. Hsdpfxevb Ubmo Alnol TECHNICAL SPECIFICATIONS: Baking surface: 12 m² EXTERNAL DIMENSIONS (in cm): - Height: 260 - Width: 175 - Length: 260 + hood 70 The equipment is available in various technical conditions and price levels: 1. Directly from the bakery. 2. After inspection, with a start-up guarantee. 3. After refurbishment, with a 6-12 month warranty. The machine is available for viewing in our warehouse (36-068 Bachórz, Poland). Additional paid options: refurbishment / transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Būklė: geras (naudotas), Srautinė sandėliavimo lentyna Karton Flow Profesionali ritinėlių sistema: INTERROLL Komplekte penkios ritinėlių lentynos, kiekvienos matmenys: 200 x 130 cm Hodpeiuidiofx Alnol Galimybė konfigūruoti skirtingam kartoninių dėžių pločiui. Bendri lentynos matmenys: 230 x 135 cm, aukštis 285 cm Galima apie 100 vnt. lentynų Siūlome ir kitų matmenų lentynas. Techninė būklė: naudota, gera techninė būklė.

Būklė: geras (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 500 mm, bendras ilgis: 1 000 mm, bendras svoris: 855 kg, WAG 894- Siūloma Novalith kietos uolienos matavimo plokštė. Matavimo plokštės matmenys: 1500 mm x 1000 mm x 190 mm Pagaminimo metai: 1987 Hsdoy Auuhjpfx Alnsl Svoris: apie 855 kg Reikalingas lygumas: 20 mikronų Faktinis lygumas: 50 mikronų

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. Hjdpfx Aefdkb Tjlnsl For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. Hodpfx Aoh R Taqelnel The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm Hjdpfx Aomhhypolnol - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) Hodpfemhh Dhox Alnjl - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Hsdpfxemhh Dzo Alnjl The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Hjdpfx Alomhh Anenol - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Hsdpfjguk A Hjx Alnel Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard Hedpfx Aleguk Dkenol - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.