Gildemeister As 67 pirkti naudotą (248)

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 140 810 h, Funkcionalumas: visiškai funkcionalus, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Bjdpfeu Dg Ubjx Ableww Operating hours: 140,810 Irco ILS short bar loader Annual maintenance carried out by DMG, last service on 08.07.2024: - Linear guideways, axial bearing, ball screw and adjusting nut of X1 axis replaced - Linear guideways, axial bearing, ball screw and adjusting nut of Z1 axis replaced - Linear guideways, axial bearing, ball screw and adjusting nut of X2 axis replaced - Linear guideways, axial bearing, ball screw and adjusting nut of Z2 axis replaced - All sliding sheet scrapers replaced; safety glass of the work area door renewed - Replacement of all feed timing belts as well as the timing belt for the sub-spindle drive - Tool drive 1 dismounted, disassembled, cleaned and fitted with new bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 exchanged - Main and sub-spindle chucks dismantled and cleaned - Machine geometry and work area newly measured and adjusted - Hydraulic filter cartridges replaced; pneumatic filter replaced For technical specifications, see attachment The machine can be inspected powered up Price €25,000 negotiable This offer is non-binding and subject to prior sale; changes or errors in technical data or equipment are reserved Used machines are purchased as seen, without guarantee or warranty claims. Delivery ex works, packaging and insurance excluded unless otherwise agreed. Price is exclusive of statutory VAT. Payment is, as usual for used machinery, due prior to loading.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Siemens control system Bar capacity: 32 mm 2 x 12-position turrets with driven tools Bjdowh U Edepfx Abloww Main spindle / sub-spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar loader magazine

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar loader and coolant system. The machine has only 15,666 operating hours (spindle hours). The machine is in very good condition and can be inspected under power. Please refer to the original order confirmation attached to the offer for further equipment details of this machine. Bedpowgi D Esfx Abloww The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Heidenhain control system Main and counter spindle Bar capacity of main spindle: 90 mm Milling spindle: Capto C6 36 tool stations Lower turret, 12x VDI 40 Bwsdswax A Rjpfx Ablow High-pressure coolant (IKZ) 80 bar Extensive accessories included 1.5 m Breuning bar feeder

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 501628, veleno greitis (maks.): 4 500 aps./min, X ašies eiga: 155 mm, Z ašies eigos atstumas: 280 mm, Strypo skersmuo (maks.): 65 mm, ašies skersmuo: 79 mm, Machine package: 2 machines = 1 x fully functional machine + 1 x donor machine for spare parts TECHNICAL DETAILS Bar diameter (standard): 65 mm Main spindle Spindle nose (flat flange): 140h5 mm Spindle bore diameter: 79 mm Draw tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Bwjdpfsvviwxjx Ablsw Main drive Maximum drive power (40%/100% DC): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% DC): 320 / 240 Nm Traverse speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ball screw pitch (X x X): 15 x 25 mm Ball screw pitch (X x Z): 15 x 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ball screw pitch (X x X/Z): 15 x 25 mm Tool turret Number of tools: 8 Tool shank: shank Ø per DIN 69880 Number of driven tool stations: 4 Maximum power (40%/100% DC): 7.6 / 4.6 kW Maximum torque (40%/100% DC): 24 / 14.7 Nm Maximum speed (tool turret 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle nose diameter (flat flange): 120 mm Indexing device: infinitely variable positioning MACHINE DETAILS Overall length (with chip conveyor): 3,500 mm Overall height (with control cabinet): 1,625 mm Overall width (with control cabinet): 1,750 mm Machine weight incl. control cabinet: 5,000 kg Weight of integrated bar feeder: 900 kg Hydraulics Capacity: 9.8 l Pump capacity: 1.1 kW Coolant system Capacity: 160 l Pump capacity: 1.65 kW Flow rate at 8 bar: 25 l

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 35 598 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07400004031, ašies variklio galia: 20 W, veleno greitis (min.): 3 250 aps./min, veleno greitis (maks.): 5 000 aps./min, strypo praėjimas: 90 mm, bendras svoris: 10 000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - CNC Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - dotazione utensili molto, molto completa - caricatore di barre LNS Sprint S2. Bodpfsuyx Hzjx Abljww

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 02260001501, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 324 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 185 mm, Z ašies eigos atstumas: 635 mm, C ašies indeksavimas: 0,025 °, TECHNICAL DETAILS Control: SIEMENS Max. swing diameter: 680 mm Swing diameter over X-slide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar capacity: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% duty cycle: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% duty cycle: 270 Nm Critical speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Bwodou T Hmmopfx Ablsw Holding torque: 200 Nm Indexing accuracy: 0.025° Sub spindle Spindle head diameter (flat flange): 140h5 mm Max. bar capacity: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% duty cycle: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% duty cycle: 160 Nm Critical speed: 1,500 rpm C-axis (sub spindle) Speed: 250 rpm Holding torque: 120 Nm Indexing accuracy: 0.025° Turret slide (X/Y/Z) Cross travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Sub spindle (Z2) Longitudinal travel: 666 mm Rapid traverse speed: 45 m/min Ball screw: 40x15 mm Turret Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm MACHINE DETAILS Hydraulics Capacity: 10 l Pump capacity: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10–60 bar Coolant system Capacity: 210 l Pump capacity: 1.7 kW Flow rate (at 6 bar): 20 l/min Electrical power requirements Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Circuit protection: 80 A Voltage fluctuation: +6%/-10% Bar loader manufacturer: Breuning Notes: - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Control system: Siemens Sinumerik 840D Bar capacity: 65 mm Spindle speeds: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Bsdpfx Abewh U D Holjww Belt filter system Chip conveyor Bar loader magazine: IRCO Profimat

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bsdpjwf D S Isfx Abloww Bar capacity: 36 mm Control unit: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 15,650 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation included with the offer. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. ----- #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 61 000 h, mašinos/transporto priemonės numeris: 04800000401, 04/02/25: Correction: This is a multi-spindle machine, not a vertical machine. Bjdpfxjhv H Hye Ablsww Sale only within the EU. Please submit your offer for the unit. ----- Technical data as per handout. Without packaging; any warranty rights are excluded. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or for compliance with any of the safety and environmental protection requirements stipulated in accident prevention regulations.

Sąlyga: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 260 mm, tekėjimo skersmuo: 200 mm, veleno skylė: 68 mm, bendras svoris: 3 200 kg, TECHNICAL DETAILS Turning diameter: 200 mm Turning diameter over cross slide: 260 mm Spindle bore: 68 mm Control: Siemens with ShopTurn Bwjdpfxjwbu E De Ablew MACHINE DETAILS Total weight: 3,200 kg EQUIPMENT - Driven tools (2 axial, 2 radial) - Schunk 201 chuck - Collet chuck incl. various collets - Various turning plates

Sąlyga: nepatikrintas (naudotas), Gildijos meistras GLD 20 Bsdpfevu Tn Eox Abljww

Sąlyga: naudotas, GILDEMEISTER GM35 AC MULTI-SPINDLE LATHE WITH PIETRO CUCCHI BAR LOADER We can offer the lathe and bar loader fully refurbished to like-new condition with CE certification. Bwsdowrpb Iepfx Ablsw

Sąlyga: naudotas, Gamybos metai: 2007, Technical Details: Swing diameter: 325 mm Turning length: 600 mm Total power requirement: 35 kW Bwedpevgb Epofx Abljw Spindle motor: 25 kW Spindle speeds: 5000 rpm Tool speeds: 4500 rpm Rapid traverse X-axis: 60 m/min Various tool holders: VDI 40 Rapid traverse Z-axis: 45 m/min Machine weight approx.: 6.5 t Floor space required approx.: 3.5 x 2.5 x 2.1 m Machine equipped with Siemens 840 D and Shopturn - C and Y axis, driven tools - Bar feeder IRCO ILS-RBK - Coolant system with high-pressure coolant (IKZ) - Partial hollow clamping unit - Oil mist separator - Counter spindle - Parts catcher

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. Bwodpfxowf D Szs Ablew The machine has only 6,944 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation attached to the offer. The machine operates with an EGS loading system -> This can be purchased separately. An extensive tooling package is included in the scope of delivery. A machine video from the factory location is available upon request. #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: beveik kaip naujas (naudotas), Lathe fully overhauled both electrically and mechanically, as new, with repainting Bedpfx Aowit Elebleww

Sąlyga: naujas, Gamybos metai: 2024, Gildemeister 42ACF: this is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, being capable of machining parts up to 42 mm in diameter with the same ease and precision. Bwjdpfjrpniqox Ablsw The 42ACF lathe offers a range of features that make it particularly user-friendly. These include intuitive programming via a SIEMENS operator panel, which allows easy setting and adjustment of spindle speed, cycle time, and threading speed. Technical specifications: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal key size: 36 [mm] ● Cross slides: 4 (positions 1-2-4-5) ● Maximum feed length: 130 [mm] ● Main spindle speed: 400 - 4000 [rpm] without threading ● Indexing time: 1-1.5 [s] ● Cycle time: 2 – 90 [s] ● Power: 22 [kW] The Gildemeister 42ACF, moreover, is a multi-spindle lathe aimed at highly specialized industrial sectors, where precision and accuracy are indispensable.

Sąlyga: naujas, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 mm - Bar passage extension on request: 25 mm - Cross slides: 4 (positions 1-2-4-5) - Maximum feed length: 100 mm - Main spindle speed: 400 – 4000 rpm with threading, 400 – 5000 rpm without threading Bedoq Nzl Tepfx Ableww - Transfer time: 0.7 s - Cycle time: 1.4 – 60 s - Power: 11 kW ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT Consisting of AC motors (protection class IP 54), main and feed motors with a programmable PLC Siemens S7-1500 DOCUMENTATION: CE Certification with manuals Electrical diagrams 1 hard copy + 1 USB copy with files in .pdf format CE Directives 2006/42/EC - 2014/30/EU - 2014/68/EU STANDARD

Sąlyga: naujas, Gamybos metai: 2024, The Gildemeister 20ACN allows, via the SIEMENS operator panel, for easy setting and modification of spindle speed, cycle time, and threading speed. It is capable of machining parts up to 25 mm in size with the same ease and precision. It offers the possibility to fit CNC turrets. Position 6 consists of: CNC part-off slide and CNC pick-off slide, variable-speed CNC pick-off spindle, with synchronization and stop functions. The CNC pick-off spindle, with specific programming, can be used as a C-axis. Technical data: • Max. round bar diameter: 20 / 25 mm • Max. square bar diameter: 17 mm • Bar pusher: 100 / 125 mm • Travel of front spindles: 86 mm • Longitudinal guide block travel: 50 mm • Radial slide travel: 42 / CNC 50 mm • Axial slide travel: 50 / CNC 56 mm • CNC cutting stroke: 42 mm • CNC pick-off slide travel: 42 mm • CNC pick-off spindle travel: 100 mm • Continuous spindle speed: 420 – 5,000 rpm • Rapid traverse times: 0.5 – 0.7 s • Main drive power: 11 kW / CNC 15 kW • Footprint without bar guide: 4,000 x 1,900 mm • Net weight: 5,500 kg Bwjdpfxjuqh Ihe Ablsw The Gildemeister 20AC, on the other hand, is a multi-spindle lathe designed for highly specialized industrial sectors, where precision and accuracy are essential.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 60 334 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 01510000031, veleno skylė: 70 mm, tekėjimo ilgis: 1 350 mm, tekėjimo skersmuo: 500 mm, plotis centre: 1 350 mm, veleno greitis (maks.): 3 000 aps./min, Nėra minimalios kainos – užtikrintas pardavimas didžiausią kainą pasiūliusiam pirkėjui! Apmokėjimo terminas už įrenginį – 2025-11-20! Dalyvavimas aukcione įpareigoja laiku atsiimti įrenginį laikotarpiu nuo 2025-12-01 iki 2025-12-05! TECHNINĖ INFORMACIJA Sukimo ilgis: 1 350 mm Sukimo skersmuo: 500 mm Apsisukimų skersmuo virš planšlito: 290 mm Apsisukimų skersmuo virš lovio: 500 mm Griebtuvo skersmuo: 250 mm Didžiausias verpstės apsisukimų skaičius: 3 000 aps./min. Išilginė eiga: 260 mm Centro atstumas: 1 350 mm Verpstės galvutė: 8 Verpstės skylė: 70 mm ĮRANGOS DUOMENYS Valdymas: HEIDENHAIN Matmenys & Svoris Matmenys (ilgis x plotis x aukštis): 3 000 x 1 800 x 1 700 mm Bendras svoris: 4 000 kg Elektros duomenys Bwsdpexm Slcefx Ablsw Įeinančios srovės tipas: trifazis Darbinė įtampa: 400 V Dažnis: 50 Hz Nominali srovė: 25 A Jungties galia: 14 kVA Darbo valandos: 60 334 h

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Allgemeine Daten Maschinengewicht: 1.850 kg Steuerung Hersteller: FANUC Modell: 18i-T Hauptantrieb Spindeldrehzahlbereich: 8.000 min⁻¹ Anzahl der Achsen: 6 Verfahrwege X-Achse: 100 mm Z-Achse: 270 mm Zusätzliche Ausstattung Schnittstellen: RS232 / PCMCIA Drehführungsbuchse Teilefänger Kühltank (zusätzlich weiterer Kühltank) Hydraulischer Stangenlader Hersteller/Typ: FNB Turbo 3-26 Zusätzliche Werkzeughalter für Drehbearbeitung Diese 6-Achs-Gildemeister GLD 25 Langdrehmaschine wurde 2003 gebaut. Sie verfügt über eine GE Fanuc Series 18i-T Steuerung, eine maximale Drehzahl von 8.000 min⁻¹ und ist für Stangendurchmesser bis 25 mm ausgelegt. Mit rotierender Führungsbuchse, Teilefänger und zusätzlichem Kühltank bietet sie starke Möglichkeiten für präzise Drehbearbeitung. Wenn Sie hochwertige Drehtechnik suchen, empfehlen wir Ihnen die bei uns verfügbare Gildemeister GLD 25. Kontaktieren Sie uns für weitere Informationen. Bwsdpfx Absxpyqrelsw Einsatzgebiete Drehen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Hello, I am offering for sale a renowned brand CNC LATHE – GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of origin: Germany Year of manufacture: 2000 _ Machine specifications: - Turret: 12 tool stations with VDI 30 holders (every second station driven) - Max spindle speed: 5000 rpm - Max turning length (Z axis): 640 mm - Max turning diameter (X axis): 290 mm - C axis - Driven tools - Spindle chuck: BERG KH 200 Bsdpfx Ajtpuh Ajbloww - Max bar diameter: 65 mm – finished part catcher - Coolant system - Hydraulic tailstock - Chip conveyor - Spindle drive power: 21 kW - Technical documentation (DTR) - Machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own stationary and mobile service team - We have already sold over 700 DMG machines - Possibility of commissioning the machine at the customer's site - Operator training and machine delivery to the customer included in the price - All our machines undergo a professional technical inspection – fully ready to work - Machine purchase is possible via installment plan or leasing.

Sąlyga: naudotas, Hydraulic self-centering steady rest, Lünette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Bwodpeiv Irlsfx Abljw Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: fixed - 3 pcs. roller bearings Ø 35 mm - Roller width: 18 mm - hydraulic self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg Good condition

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veikimo valandos: 20 130 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 02260008351, tekėjimo ilgis: 600 mm, tekėjimo skersmuo: 324 mm, X ašies eiga: 185 mm, Y ašies eiga: 40 mm, Z ašies eigos atstumas: 620 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time, between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning length: 600 mm Turning diameter: 324 mm Travel, X-axis: 185 mm Travel, Y-axis: 40 mm Travel, Z-axis: 620 mm Rapid traverse X-axis: 4 m/min Rapid traverse Y-axis: 7 m/min Rapid traverse Z-axis: 7 m/min Spindle bore: 72 mm Max. spindle speed: 5,000 rpm Bar capacity: 45 mm Max. counter spindle speed: 7,000 rpm Counter spindle bore: 57 mm Number of tool magazine stations: 12 Tool holder: VDI 40 Driven tool power: 12 kW Torque: 10.5 Nm Rotational speed: 4,500 rpm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Dimensions & Weight Dimensions (L x W x H): 4,890 x 2,460 x 2,080 mm Total weight: 6,500 kg Operating Hours Spindle hours: 20,130 h Power-on hours: 50,305 h Bsdpfxjxm Sxis Ablsww EQUIPMENT Documentation/manual 12 driven tools Tool package Belt filter system Bar feeder MKE HL 12 PN, year of manufacture 2008

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Hello, I am offering for sale a renowned TOKARKA CNC GILDEMEISTER CTX 400 V3 lathe, equipped with live tooling and a C-axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of origin: Germany Year of manufacture: 1997 _ Machine specifications: - Turret: 12 stations for VDI 30 tool holders (every other station driven) - Max spindle speed: 5,000 rpm - Maximum turning length (Z-axis): 640 mm - Maximum turning diameter (X-axis): 290 mm - C-axis - Live tooling Bedpfx Abetw U E Ujleww - Tool touch probe - Spindle chuck: BERG KH 200 - Max bar diameter: 65 mm – finished parts receiver - Coolant system - Hydraulic tailstock - Chip conveyor - Spindle motor power: 21 kW - Operating manual/documentation (DTR) - Machine weight: 5.2 tons _ WHY BUY MACHINERY FROM PPM? - We have our own in-house and mobile service team - Over 700 DMG machines sold - Possibility of machine commissioning at the client’s site - Operator training and machine delivery included in the price - All machines undergo a professional technical inspection – guaranteed 100% ready for operation - Financing options available – hire purchase and leasing _ www_ppmsc_pl _ Tomek_Contact_+48 504 009 641 Paweł_Contact_+48 607 305 841