Gilių skylių gręžimo staklės
GILDEMEISTER & KNOLL 2 M 01-2-320

Name: GILDEMEISTER & KNOLL 2 M 01-2-320
Brand: GILDEMEISTER & KNOLL
Availability: InStock

Gamybos metai

1985

Būklė

Naudotas

Vieta

Metzingen

Gilių skylių gręžimo staklės GILDEMEISTER & KNOLL 2 M 01-2-320

Duomenys apie mašiną

Mašinos pavadinimas:: Gilių skylių gręžimo staklės

Gamintojas:: GILDEMEISTER & KNOLL

modelis:: 2 M 01-2-320

Gamybos metai:: 1985

Būklė:: naudotas

Kaina ir vieta

Vieta:: Metzingen

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A16566816

Nuorodos numeris:: 1049-402623

Atnaujinimas:: paskutinį kartą atnaujinta 17.07.2024

aprašymas

Maximum core drilling diameter: 18 mm
Nwodpfx Ahet Hwvajcsl
Drilling depth: 320 mm
Swing diameter: mm
Total power requirement: 33 kW
Machine weight: approx. 6 t
Space requirement: approx. m
GILDEMEISTER & KNOLL / TBT
Horizontal 2-spindle deep hole drilling machine
Type: 2 M 01-2-320
Year of manufacture: 1985 / 1999 (rebuilt and modernised by TBT)

Drilling - solid drilling: approx. 1 - 18 mm
Drilling - reaming: approx. 25 mm
Drilling depth: 320 mm

Centre height above bed/table: 150 mm
Travel of drilling slide max. approx.: 500 mm
Travel of feed slide (linear guides): 500 mm
Spindle distance: 125 mm

Drilling feed/rapid traverse step-less: approx. 35 - 1,000/7,000 mm/min

Centre distance between the spindles: approx. 125 mm
Spindle speeds FORTUNA HF spindle up to max.: 24,000 rpm (800 Hz)

Total drive power of the complete machine: approx. 33 kW - 400 V - 50 Hz
Weight: approx. 6,000 kg

Accessories / special equipment:
" Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, bore approx. 5 mm) which are fed by an inclined conveyor into a 2-position alignment station, checked for correct orientation, and then automatically and in pairs loaded into the machining zone between drill bush holder and powered tailstock via a transversely mounted loading portal (2 x double grippers). After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage test station. After successful testing, the workpieces fall into transport containers.
" Sequence programming and monitoring via SIEMENS OP 17 PLC control.
" 2 cooled and oil mist-lubricated HF spindles from FORTUNA, approx. 2/3.5 kW output
" Drilling slide feed via GS motor and ball screw
" Separate drilling oil system approx. 1,500 litres with various pumps and a sophisticated belt filter cleaning system
" Separate hydraulic unit approx. 10 kW
" Separate BKW cooling system for spindle and hydraulic oil cooling
" 2 separate control and switch cabinets, CE marking

Condition: good to very good - will soon be ready for demonstration
Delivery: ex stock - as inspected
Payment: strictly net - upon receipt of invoice

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruotas nuo: 2005

216 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 7123 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Siūlų valcavimo mašina PROFIROLL ROLLEX INCREMENTAL

Contamine-sur-Arve

1 588 km

Siūlų valcavimo mašina
PROFIROLLROLLEX INCREMENTAL

Skambinti

Būklė: naudotas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device Nedpfxjuhb Uhe Ahcewl - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Peržiūrėti detales

Mažas skelbimas

Retorto terminio apdorojimo krosnis MUT 360/400-1150

Zuchwil

1 437 km

Retorto terminio apdorojimo krosnis
MUT360/400-1150

Skambinti

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Nwjdpfxoiryyaj Ahcjl Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Peržiūrėti detales

Mažas skelbimas

Šaltas apskrito pjovimas - Automatinis BERG & SCHMID VKS 370 VA MPS

Velen

1 176 km

Šaltas apskrito pjovimas - Automatinis
BERG & SCHMIDVKS 370 VA MPS

Skambinti

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side · Especially robust machine base with built-in automatic cooling system · Large chip drawer Nedpfed Iin Hsx Ahcswl · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Adjustable cutting pressure NOTE: Price does not include saw blade! (Saw blade price: €204)

Peržiūrėti detales

Mažas skelbimas

CNC šveicariško tipo tekinimo staklės TORNOS GAMMA 20/5

Contamine-sur-Arve

1 588 km

CNC šveicariško tipo tekinimo staklės
TORNOSGAMMA 20/5

Skambinti

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 5 BACKWORK - Number of positions: 4 - Number of driven positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Spindle hours: 18,849 h EQUIPMENT/ACCESSORIES - CNC control: Fanuc 31i-model A Nedpsuha Nwjfx Ahcowl - Driven tooling at stations: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 20 bar - Bar loader: TORNOS SBF320 - Electrical transformer - Number of driven tool holders: 5 - Double drill/mill tool holder: 1

Peržiūrėti detales

Mažas skelbimas

Kirchheim bei München

1 140 km

Hidraulinis presas
DUNKESHZ 315

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Nwedpfxov Rwu Us Ahcjl Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Peržiūrėti detales

Mažas skelbimas

Ellwangen (Jagst)

1 162 km

Lovų frezavimo staklės
SHWUF 5 - 1500

Skambinti

Būklė: labai geros būklės (naudotas), X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 750 mm, stalo plotis: 1 500 mm, stalo ilgis: 850 mm, sukimosi greitis (maks.): 2 500 aps./min, plunksnos brūkšnys: 120 mm, SHW UF 5 Travel Paths • X-axis (rotary table): 1,500 mm • Y-axis (spindle vertical): 1,000 mm • Z-axis (spindle horizontal): 750 mm Control • CNC control: Heidenhain TNC 355 Automatic Swivel Head (Change between horizontal and vertical machining) Quill 120 mm Spindle mount SK 50 Speed 2,500 rpm Partial overhaul 2014 • Year of manufacture 1990 • Inspection/Servicing 2025 Table assembly • Travel path: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard enclosure Nodpsvfm I Tofx Ahcswl We stock ALL spare parts for this model range (SHW UF 5)! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control retrofitting. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drilling milling machine - used milling machine for metal - used metal mill - used metal milling machine - used CNC mill - CNC milling machines - CNC milling machines - milling machine - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Peržiūrėti detales

Mažas skelbimas

Magnetroninis sputter PVD įrenginys CemeCon CC 800/9 HIPIMS

Bremen

1 004 km

Magnetroninis sputter PVD įrenginys
CemeConCC 800/9 HIPIMS

Skambinti

Gamybos metai: 2006, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputter PVD system, manufactured in 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection class: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3×400/N/PE V Frequency: 50/60 Hz CemeCon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS-capable - Booster anodes - 4 gas lines, including 1 flammable gas - BIAS: DC, MF-pulsed or HIPIMS - 3x heating units - 2 turbopumps - 6-position substrate table - Numerous targets - Includes option for BNC interface to measure peak I, U, +-P at HIPIMS cathodes + BIAS - Extensive accessories such as loading materials, spare parts, and consumables - In 07/2023, system control was updated to the latest standard and a maintenance service by the manufacturer was performed. A bundle including a chiller, precision cleaning system for substrates, and lapping/polishing machine can also be offered. Nwedpfox Tt T Rsx Ahcsl If you have any questions or need more information, please feel free to send us a message or call us.

Peržiūrėti detales

Mažas skelbimas

Vokietija

872 km

Siūlų valcavimo mašina
SENYD.44. EH

Skambinti

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Njdpfsw D Aq Tsx Ahcowl Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Peržiūrėti detales

Mažas skelbimas

Pjovimo ir centravimo staklės UMA - SZM SZM 100/1000

Offenbach an der Queich

1 256 km

Pjovimo ir centravimo staklės
UMA - SZMSZM 100/1000

Skambinti

Mažas skelbimas

Frezavimo staklės su lova - Universal Erste Maschinenfabrik Auerbach FBE 1500

Vokietija

872 km

Frezavimo staklės su lova - Universal
Erste Maschinenfabrik AuerbachFBE 1500

Skambinti

Būklė: naudotas, Gamybos metai: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping surface table L x W: 1600 x 800 mm Table load capacity: 40 kN Nwodpfx Aju Nc Rishcol Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. L x W x H: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. L x W: 38.5 m² Applications: Milling, drilling, thread cutting, boring with direct encoded linear measuring systems the guides for all three axes are flat slideways milling head position controlled +/-90° internal coolant supply (IKZ) and external cooling milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high pressure pump 60 bar (internal cooling), nominal flow 20 l/min, and low pressure pump 4 bar (external cooling), as well as spray gun compact belt filter RESY REBER SYSTEMATIC GmbH, Type KBF 452/710 hinged belt chip conveyor DGS, Type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Peržiūrėti detales

Reklamuokite čia