Foseco Impeller pirkti naudotą (318)

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection Ijdpfxjfz Dqfe Agfjtd • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter exchange • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² Iedpfefz Dqmjx Agfotd • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per pulse • 50 l waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • Base weight of the filter material used: up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement Ijdpfxofz Dq As Agfotd • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h Ijdpfx Aofz Dttsgfjtd • 1/4" pneumatic connection • Number of filters: 8 units • Filter area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L 6-8 bar per pulse • 50 L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two operating modes – full power and ECO • The base weight of the filter material used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter fitted with its own solenoid valve

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, tūrio srautas: 8 000 m³/val, bendras aukštis: 3 050 mm, bendras ilgis: 1 800 mm, bendras plotis: 800 mm, ekstrakcijos antgalio skersmuo: 300 mm, RAF-POL 5.5 kW Dust Extraction Unit, NEW Specification: Itsdpfx Aowmwxkogfsd • Condition: Brand new • Manufacturer: RAF-POL • Model: RWM 2.2 • Turbine motor power: 5.5 kW • Turbine inlet diameter: 300 mm • Filtering surface: 18 filter bags, 160x1800 mm each • Capacity: approx. 8,000 m³/h • Initial velocity at nozzle: 28 m/s • Collection bag diameter: 2 x 500 mm • Built-in automatic bag cleaning mechanism • Antistatic filter bags; 400 g/m² material weight • Robust construction made of 2 mm galvanized sheet steel • Overall dimensions: 180 x 80 x 305 cm (L x W x H) Additional Information: • Factory-new machine, never used, available immediately • Various 1-, 2-, and 3-bag models in different power ratings and configurations in stock • Delivery time for custom orders: up to 10 business days • We manufacture all ductwork fittings, piping, and complete extraction installations for each unit • The extraction unit and all components are entirely manufactured and assembled in Poland • On-site demonstration and testing of the unit possible About RAF-POL Dust Extractors: Our dust extractors are versatile units designed for extracting sawdust, dust, and other residues generated during woodworking and wood-based materials processing. The durable and strong design is built from high-quality 2 mm galvanized sheet steel. The extractor is equipped with a self-cleaning impeller featuring reinforced construction, made from highly abrasion-resistant HARDOX steel. This extraction unit is ideal for use with CNC machines, plotters, and other woodworking equipment. The filter bags are made from antistatic material with a weight of 400 g/m².

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: ribota funkcionalumas, bendras svoris: 150 kg, GRUNDFOS electronically controlled dry-running pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-stage inline pump Art. 99114824 Itjdpoyc T Apofx Agfjd PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA motor We offer a Grundfos electronically controlled dry-running pump. ⭐︎ Condition: good (used) The electronically controlled dry-running pump is used but operational. The pump was working flawlessly up until a few weeks ago when it was removed. Manufacturer: Grundfos Type: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with variable-speed MGE motor Frequency converter: integrated Pump speed: 2,930 rpm Nominal flow rate: 135 m³/h Nominal head: 20.1 m Mechanical seal: BAQE Pump housing: cast iron Impeller: cast iron Gross weight: 157 kg For further data, please refer to the nameplate. Scope of delivery as shown. Inspection before purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, head piece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the pipework. The pump is fitted with a non-balanced rubber bellows-type mechanical seal. The mechanical seal complies with EN 12756. Pipe connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump is equipped with a fan-cooled permanent magnet synchronous motor. The motor efficiency level meets class IE5 according to IEC 60034-30-2. For speed control, the motor is fitted with a frequency converter and PI controller, both housed in the motor terminal box. The electronic speed control enables continuous adjustment of the motor speed and thus the pump performance according to current demand. The pump is equipped with a differential pressure sensor.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for transporting bulk materials such as seeds, grain, peas, corn, and for conveying wood pellets, sawdust, plastic granulate, sand, abrasive powders (even corundum), and loose steel fibre reinforcement to concrete mixers or batching plants, etc. The conveyor can also be used for aerating various materials, including hay, cereals, herbs, and others. It is perfect for blowing fresh air into production halls, poultry houses, and barns. Additionally, it can be used for extracting smoke, dust, and harmful welding gases. Compatible with flexible hoses. The high-performance blower is equipped with a 5.5 kW/400V motor and features a robust segmental construction made from quality steel. Pipes and elbows are constructed from 3.6 mm thick steel, enabling the transportation of even the most demanding materials while ensuring long durability. We can also deliver flexible hoses (both light and heavy-duty) for transporting the aforementioned materials. It transports materials over long distances without difficulty (distance depends on material type). The high efficiency of the blower allows transport both horizontally and vertically. Our company has extensive production experience. Upon request, we can manufacture certain components or the entire unit in stainless steel (including pipes), or in galvanized finish. Our production process follows the Kaizen methodology. Kaizen—meaning 'change for the better' (in Japanese, 'kai' means change and 'zen' means better)—is a philosophy and management method that emphasizes continuous improvement of processes and company activities. PLEASE SEND INQUIRIES PREFERABLY VIA EMAIL The basic version includes only the blower with a flanged outlet for connecting various pipes. We manufacture steel pipes and elbows using 3.6 mm thick steel. Impeller speed: 2800 RPM. (OPTION: electronically controlled speed reduction available, in stock). Using frequency inverters for three-phase motors offers numerous benefits, including energy savings, precise torque adjustment, and improved overall system efficiency. Additionally, they help reduce energy losses, thereby enhancing production efficiency. Highly efficient blower. The machine is built from easily replaceable segments (bolted with M8 screws), which are always in stock, ensuring versatile applicability. Individual modules are sold separately (e.g., blower only). We can tailor the design to customer requirements. The blower is easy to transport (can be moved by one person), and can be carried even with a small car, van, or trailer. Installation and operation are straightforward. We also manufacture additional wheels to facilitate movement (two types). Net price of the basic set without electronic speed control – 10,300 PLN (EUR 2,453) Net price with electronic speed control – 13,400 PLN (EUR 3,190) Price of the blower only, without feed hopper – 10,300 PLN (EUR 2,452) Price for galvanized air divider (for 2 pipe inlets/outlets, with flanges for pipe mounting) – 1,900 PLN (EUR 452) Price for galvanized air divider (for 3 pipe inlets/outlets, with flanges for pipe mounting) – 2,400 PLN (EUR 571) Additional electronic stepless speed control (wide reduction range) for motor and blower – 2,900 PLN (EUR 690) For more information, please contact us via email. Itedsw Aqamspfx Agfed We operate 24/7.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Myjka dynamiczna model ERFOR® DR8 Urządzenie komponentowe do linii myjących przeznaczone do recyklingu ♻️ ♻️ ♻️ Myjki dynamiczne to maszyny służące do mycia umiarkowanie zabrudzonych i rozdrobnionych odpadów tworzyw sztucznych, takich jak: opakowania PP, PVC, butelki PET, rozdrobniony materiał typu big-bag (LLDPE, LDPE, HDPE, PP, PVC, PS), odpady chemii gospodarczej i wiele innych. Myjki oferowane przez Koltex PRS to łatwe w obsłudze i niezawodne urządzenia, które mogą być skonfigurowane jako wydajniejszy system mycia dynamicznego typu kaskadowego (tandem – 2 x 30 kW, 2 x 55 kW lub 2 x 75 kW). Isdpjuqlmzefx Agfstd Wielopunktowe dozowanie wody do myjek sitowych (system czyszczenia) oraz aktywna ekstrakcja zanieczyszczeń zapewniają wydajniejszą pracę, a dynamiczne podawanie materiału jest możliwe dzięki obrotowym łopatom wirnika. Wydłużony odcinek sita (1400 mm) znacząco poprawia jakość mycia, a odprowadzanie nadmiaru wody zapewnia zastosowanie sita z odpornej na kwasy stali nierdzewnej. Zastosowanie dwóch segmentów sitowych ułatwia konserwację i serwis. Model – DR8 Moc silnika [kW] – 30 / 55 / 75 kW Wydajność suszenia folii [kg/h] – 1000 / 1500 / 2000 kg/h Wydajność suszenia młynu [kg/h] – 4500 W naszej ofercie znajdziesz również: Kompletne linie do recyklingu tworzyw sztucznych Linie myjące DWFS® Linie do granulacji i ekstruzji Więcej informacji na naszej stronie internetowej.

Gamybos metai: 2025, būklė: naujas, DeDietrich oil-fired boiler QUANTROL temperature controller Tube-in-tube heat exchanger LIVERANI stainless steel impeller pump Pre-installed mobile turnkey unit with impeller juice pump, high-efficiency boiler, heat exchanger, and automatic control system, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 63 kW boiler with oil burner Circulation pump Pressure compensation tank Automatic temperature control Tube-in-tube heat exchanger Capacity: 750 l juice/hour Itsdpfx Agogig Igjfod Oil consumption: approx. 6 l/h at full load

Gamybos metai: 2025, veikimo valandos: 20 h, būklė: naujas, Chamber pasteurizer, steam-heated Full stainless steel construction Designed for 1 Euro pallet with a loading height of 1500 mm Maximum 40 crates measuring 400 x 300 x 300 mm (L x W x H) 40 crates with 20 x 0.5 litre bottles = 800 bottles 40 crates with 24 x 0.33 litre bottles = 960 bottles Insulation thickness: approx. 50 mm Standard electronic pasteurization control, consisting of: - Setting the heating rate (also dependent on the steam boiler’s heating capacity) - Setting the desired pasteurization temperature - Setting the required holding time - Setting the shut-off temperature Isdpfxsclq Dqs Agfetd - Electronic temperature logger for product and chamber temperature Air circulation by high-performance radial fan with stainless steel impeller Steam injection into the air duct for optimal steam distribution Pneumatic steam valve Central condensate drainage with DN 70 connection nozzle for drain pipe 4 pcs. adjustable feet on rubber plates Steam consumption: approx. 50 kg per hour at 1 bar Power consumption: 4 kW 16A / 5-pin / 400V

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Full stainless steel construction for 2 Euro pallets with a loading height of 1500 mm max. 80 crates sized 400 x 300 x 300 mm (L x W x H) External dimensions: Width x Height x Depth: 2450 mm x 2678 mm x 2050 mm Chamber internal dimensions: 2066 x 1795 x 1340 mm (Width x Height x Depth) Insulation thickness: 40 mm Standard features: • Electronic pasteurization control, including: – Adjustable heating rate (also depending on the boiler steam output) – Setting of the desired pasteurization temperature – Setting of the desired holding time – Setting of the shut-off temperature • Electronic temperature recorder for product and chamber temperature • Air circulation by 1 high-performance radial fan with stainless steel impeller • Steam injection into the air duct for optimal steam distribution Itjdeclq Ixjpfx Agfed • Pneumatic steam valve • Switchable flap for fresh air supply for cooling • Central condensate drain with DN 100 connection socket for drainage piping • 4 height-adjustable feet on rubber pads Steam consumption: approx. 80 kg per hour at 1 bar Power consumption: 5.5 kW Weight: approx. 650 kg

Gamybos metai: 2009, veikimo valandos: 550 h, būklė: naudotas, Pre-installed mobile complete unit with impeller juice pump, efficient heating boiler, heat exchanger, and automatic control system. Consisting of: - Chassis mounted on 2 fixed and 2 swivel castors - 41 kW Wolf gas heating boiler - Exhaust pipe diameter 180 mm - Circulation pump - Expansion vessel - Automatic temperature control - Plate heat exchanger - For LPG version including gas bottle holder and gas pressure regulator - Output: 500 l juice per hour Isdpfx Ajclttpsgfotd Dimensions (LxWxH): 1450 x 980 x 1700 mm Weight: approx. 468 kg

Būklė: naujas, ruošinio svoris (maks.): 10 kg, rotoriaus skersmuo: 250 mm, Aukštos precizijos vertikalioji balansavimo mašina diskinio tipo rotoriams iki 10 kg Modelis 97V10 – tai universali vertikali balansavimo mašina, sukurta efektyviam diskinio tipo rotorių, neturinčių savo guoliavimo paviršių, balansavimui. Idealiai tinka serijinei, mažos apimties ir vienetinei gamybai, užtikrina optimalų Jūsų gaminių našumą ir patikimumą. SVARBIAUSIOS SAVYBĖS • Didelis tikslumas: užtikrina precizišką disbalanso matavimą, bent 4 g∙mm/kg tikslumu. • Universalus dizainas: tinka plačiam diskinio tipo rotorių spektrui, įskaitant: - Įvairios konstrukcijos diskus - Skriemulius ir smagračius - Ventiliatorių sparnuotes - Stabdžių diskus ir būgnus - Sankabas - Siurblių sparnuotes - Pjovimo įrankius • Efektyvi eksploatacija: - Vertikali sukimosi ašis greitam ruošinių keitimui ir patogiai prieigai. - Pusiau automatinis darbo režimas efektyviam darbui. Itedeu U Nqdjpfx Agfed - Apsauginiai gaubtai ir atitikimas CE bei ISO saugos reikalavimams. • Lanksti komplektacija: - Galima komplektuoti su gręžimo ar frezavimo moduliais disbalanso korekcijai vietoje. - Galimos įvairios veleno tvirtinimo versijos (cilindrinės ar kūginės) bei specialūs tvirtinimo mandreliai. - Pasirinktinai – pneumatiniai arba rankiniai tvirtinimo cilindrai ir hidrauliniai keltuvai sunkiems ruošiniams. TECHNINIAI DUOMENYS Balansuojamų rotorių svoris: 0,1 – 10 kg Didžiausias rotoriaus skersmuo: 250 mm Didžiausias rotoriaus aukštis: 150 mm Minimalus pasiekiamas likutinis specifinis disbalansas: 4 g*mm/kg Matomų korekcijos plokštumų skaičius: 1 arba 2 Rotoriaus sukimosi greičio diapazonas: 300 – 1500 aps./min. Variklio galia: 1,0 kW Maitinimo tinklo parametrai: 380 V, 3 fazės, 50 Hz Norėdami gauti daugiau informacijos ir aptarti Jūsų balansavimo poreikius, kreipkitės į mūsų pardavimo komandą. Mes gaminame balansavimo mašinas visiems poreikiams. Susisiekite ir gaukite geriausią pasiūlymą! 👇

Gamybos metai: 2026, būklė: naujas, Technical Data: - Rated output: 2000 L/h - Power requirement: 0.5 kW, 230 V, 6 A, single-phase - Material: Wnr. 1.4301, AISI 304 stainless steel Ijdpfx Agjfhb I Hsfstd - Dimensions: 550 x 1075 x 350 mm - Weight: 50 kg - IP65 electronics - Stainless steel pump with food-grade rubber scrapers - Fully automatic - Connection: DN 65 - Minimal maintenance - The machine can be operated either fully automatically or manually. -- Compatible with all Maurer presses.

Gamybos metai: 2026, būklė: naujas, Technical Data: - Capacity: 200-600 bottles/h - Nominal output: 300 L/h - Power requirement: 0.1 kW, 24 V Itedjfkz Tqopfx Agfed - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 350 x 1100 x 1250 mm - Weight: 40 kg - Connection: DN 65 - Volumetric filling - Filling accuracy: +/- 0.5% - Filling temperature: 0-100 °C - Filling range: 5 g - 35,000 g - Minimal maintenance - Semi-automatic Optional: - Foot switch - Automatic set: rotary table + capacitive sensors enable fully automatic operation. The impeller simultaneously functions as a self-priming pump and flow meter, enabling the filling of high-viscosity liquids.

Būklė: naujas, Gamybos metai: 2025, Pre-installed mobile complete system with impeller juice pump, efficient heating boiler, heat exchanger, and automatic control. 41 kW gas heating boiler Circulation pump Itsdpfjb Ilnyox Agfsd Expansion vessel Automatic temperature control Tube-in-tube heat exchanger For liquefied gas version, incl. gas bottle holder and gas pressure regulator Capacity: 500 l juice/hour, heating from 10°C to 80°C Weight: 450 kg Filler not included

Gamybos metai: 2020, būklė: naujas, Pre-installed mobile complete unit with impeller juice pump, efficient heating boiler, heat exchanger, and automatic control system, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 160kW WOLF gas heating boiler Circulation pump Expansion tank Automatic temperature control Plate heat exchanger made of stainless steel 1.4401 For liquefied gas version: incl. gas cylinder holder and gas pressure regulator Capacity: 2,000 l juice/hour Iedpfx Agjcl Shvofjtd Weight: approx. 1,000 kg

Gamybos metai: 2022, būklė: naujas, Stainless steel design Motor power: 1.1 kW Left-right rotation direction Stirrer shaft length: 1000 mm Itedpfxo Hnmvs Agfed Stirrer impeller diameter: 150 mm

Būklė: naudotas, BENDRA INFORMACIJA Sparnuotės skersmuo: 200 mm Maišytuvas: Propeleris Kita: Bendras ilgis apie 1 060 mm Vieta: Brėmenas Iedsx Dlnrjpfx Agfstd Veleno skersmuo: 35 mm Veleno ilgis: 910 mm Gaminį liečianti medžiaga: V4A 1.4401/04 (AISI316) Būklė: naudotas

Būklė: geras (naudotas), Used stainless steel pressure vessel with agitator motor Item number: 10470 Previous application: Cosmetics Capacity: approx. 750 liters Type: Vertical, on 4 castors with galvanized forklift tunnels Product-contact material: 1.4301 stainless steel Design: Single-walled Bottom: Conical bottom Top: Dished head Operating pressure (per nameplate): +2.2 bar Tank dimensions: External diameter: 980 mm Height of legs: 190 mm Clearance from outlet to ground: 180 mm Total height: 1960 mm Total width: 1170 mm Total length: 1000 mm Materials: Internal: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Itsdsfdgrnspfx Agfjd Agitator motor, agitator shaft and impeller missing Outlet: DN32 mm Outlet type: Disc valve Manhole: 355 mm Various connections Forklift tunnels

Būklė: naudotas, Used agitator with weighing scale Article number: 10824 Previous application: Pharmaceutical Type: Free-standing on 4 casters Medium-contact material: 1.4301 / AISI 304 Tank dimensions: Iedpfxout U Tpe Agfstd Total width: 500 mm Total length: 1500 mm Total height: 1560 mm Equipment/features: Nameplate: Yes Agitator type: Beam Shaft length: 355 mm Impeller diameter: Ø180 mm Weighing scale

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Agilent 6210 G3258A, G1969A Zeitflug-Flüssigchromatograph-Massenspektrometer LC/MSD TOF. Das Agilent TOF ist ein Massenspektrometer mit orthogonaler Zeitflugachse (oa-TOF). Das bedeutet, die Ionen, die die Flugröhre erreichen, werden in eine Richtung beschleunigt, die senkrecht zu ihrem ursprünglichen Weg verläuft. Ein Agilent Zeitflug-Massenspektrometer-System (TOF) kann in mehreren Konfigurationen eingerichtet werden: - Für LC/MS mit Normalfluss: mit Binär- oder Quaternärpumpe, Well-Plate-Sampler (oder Autosampler) sowie ESI-, APCI-, APPI- oder MMI-Ionenquellen - Für LC/MS mit Mikrofluss: mit Kapillarpumpe, Mikro-Well-Plate-Sampler sowie ESI-, APCI- oder MMI-Ionenquellen - Für LC/MS mit Nanofluss: mit Nanopumpe, Mikro-Well-Plate-Sampler sowie Nanospray- oder Dual-Nanospray-Quelle - TOF-System mit AP-MALDI-Quelle Iodpfx Ajt Ui N Ujgfstd Jede Systemkonfiguration bietet Vorteile für die Arzneimittelforschung – vom Hochdurchsatz-Screening bis zur hochsensitiven Detektion und präzisen Massenbestimmung. Ausstattung/Merkmale: - ESI – Elektrospray-Ionisation - APCI – Atmosphärendruck-Chemische Ionisation - APPI – Atmosphärendruck-Photoionisation - MALDI – Matrix-unterstützte Laserdesorptions-Ionisation - MMI – Multimode-Ionisation Guter, funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Edwards E2M1.5 Vakuumpumpe. Diese E2M1.5 zweistufige, ölgedichtete Drehschieberpumpe wurde speziell entwickelt, um ein maximales Endvakuum sowie hohe Saugförderleistungen zu erreichen – bei geräuscharmem Betrieb und kompakter Bauweise. Diese Pumpen zeichnen sich durch ihre langfristige Zuverlässigkeit aus und haben sich als Industriestandard in verschiedensten wissenschaftlichen und Laboranwendungen etabliert. Die E2M1.5 Vakuumpumpe verfügt zudem über ein druckbeaufschlagtes Ölsystem, das die Lagerflächen der Pumpenwelle sowie die Dichtflächen des Rotors schmiert. Ein Ölverteilerventil verhindert nach Stillstand der Pumpe den Öl-Rückfluss (Suckback) in das Pumpeninnere. Technische Daten: Spannung: 220–230 V Leistung: 0,15 kW inkl. Abluftfilter Itsdjuaxx Iepfx Agfed Endvakuum mit Gasballast: 1 x 10⁻² mbar Abmessungen (B) x (T) x (H): 35 x 20 x 25 cm Guter, voll funktionsfähiger Zustand. Schauen Sie sich auch gerne unsere weiteren Angebote an.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Ijdocnw U Dspfx Agfstd Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Būklė: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips produced by milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows chip extraction from above or below Durable metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bags Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 120 l External diameter extraction inlet 203 mm External diameter extraction outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Iodshk S Sdepfx Agfstd Electrical data No-load speed 2950 rpm Power consumption 2.2 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1.92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal air flow 2800 m³/h Max. negative pressure 1900 Pa Scope of delivery: Two filter bags, two chip collection bags Location: In stock at 54634 Bitburg - Available immediately -