Eisele Vms 120 pirkti naudotą (97)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Bodjuiy Hrepfx Aahold Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Gamybos metai: 2004, Sąlyga: naudotas, Maks. pjūklo disko skersmuo: 500 mm Pjovimo sritis iki 80x200 mm Bodpexn Iq Dofx Aahold Paviršiaus padavimo ilgis: maks. 800 mm su skaitmeniniu rodmeniu Pjūklo disko greitis: 2 aps./min. Detalės skaitiklis su automatiniu išjungimu pasiekus nustatytą kiekį Be laipsnių reguliuojamas pneumatinis medžiagos padavimas Hidropneumatinis pjūklo padavimas Pneumatiniai medžiagos spaustuvai Purškimo įrenginys Įeina naudojimo instrukcija Staklių matmenys: 2100 x 1100 x 1500 mm (P x G x A) 1000 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation Bodpfxjw D T Uie Aahjld * Very high cutting precision * Short cycle times * Burr-free cutting * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Used for cutting corner connectors. Very well-maintained, used machine in ready-to-operate condition. Technical specifications: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / up to 5x reversal possible - Cut-off length: from 8 mm, depending on profile - Remnant length: from 90 mm, depending on cut-off length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (LxWxH): 2,700 x 1,400 x 2,300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feeder - Roller conveyors - Extraction system - Chip bunker - Various accessories - CE marking No guarantee for the completeness or accuracy of technical data or equipment. Subject to prior sale.

Gamybos metai: 2011, Sąlyga: naudotas, Maks. pjūklo disko skersmuo: 500 mm Pjovimo sritis iki 80 x 200 mm Padavimo ilgis: maks. 800 mm su skaitmeniniu indikatoriumi Pjūklo disko greitis: 2 aps./min. Gabalų skaitiklis su automatiniu išsijungimu pasiekus nustatytą kiekį Bedsxl Dz Tepfx Aahsld Be pakopų reguliuojamas pneumatinis medžiagos padavimas Hidropneumatinis pjūklo padavimas Pneumatiniai ruošinio spaustuvai Purškimo įrenginys Tik 4400 darbo valandų Komplekte naudojimo instrukcija Staklių matmenys: 2100 x 1100 x 1500 mm (Pl x G x A)

Gamybos metai: 2006, Sąlyga: naudotas, Didžiausias pjūklo disko skersmuo: 500 mm Pjovimo sritis iki 80 x 200 mm Padavimo ilgis: maks. 800 mm su skaitmeniniu ekranu Pjūklo disko apsukos: 2 aps./min. Vienetų skaitiklis su automatinio išjungimo funkcija pasiekus nustatytą vertę Blodpfjvcmirjx Aahsd Belaipsniškai reguliuojamas pneumatinis medžiagos padavimas Hidropneumatinis pjūklo padavimas Pneumatiniai medžiagos užspaudėjai Purškimo įranga Tik 2 200 darbo valandų Pridedama naudojimo instrukcija Staklių matmenys: 2100 x 1100 x 1500 mm (IxPxA)

Sąlyga: naudotas, Saw blade diameter 275 mm Cutting diameter up to 90 mm Bsdpfjwglgiox Aahjld Flat cutting area 120 x 75 mm Speed 40/80 rpm Mitre cuts 45°/90°/-45° Machine weight approx. 150 kg Manual saw blade feed Accessories: Coolant device Base frame with 2 drawers

Gamybos metai: 1996, Sąlyga: naudotas, Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise clamping width: 100 mm Feed length: max. 500 mm Spindle speed: 2,800 rpm Electric milling feed via foot switch activation Profile clamping via infinitely adjustable swiveling vise. Bodpoq Awg Esfx Aahsld

Gamybos metai: 1998, Sąlyga: naudotas, Long-cut saw for cutting aluminum profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Bsdpfxowx I Hvj Aahold Max. saw blade diameter: 450 mm Maximum feed length of the material pusher: 6,200 mm The machine is currently dismantled and in storage with us. Further technical data available on request.

Gamybos metai: 2009, Sąlyga: naudotas, Sawing system for aluminum featuring 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, outfeed table, chip conveyor, and extraction system included Soundproof enclosure Control via Siemens S7 panel Operating manual and documentation available; further technical details upon request The machine was operational until dismantling Bljdpfx Aajqzmnushod Additional technical specifications available upon request or see photos

Gamybos metai: 1993, Sąlyga: naudotas, Milling cutter diameter: 300 mm Maximum notching width: 350 mm Maximum notching depth: 110 mm Bodpjrv A Hmsfx Aahjld Maximum profile height: 150 mm Feed length: 500 mm Stop adjustable between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity lubrication system Manual feed Weight: approx. 280 kg

Gamybos metai: 2000, Sąlyga: naudotas, Max. saw blade diameter: 350 mm Pneumatic material clamps Blsdew Ddztopfx Aahjd Micro-spray device Saw table can be swiveled in both directions

Gamybos metai: 1967, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 9317, Saw blade diameter: 275 mm Cutting capacity at 90°: 120 x 75 mm Cutting capacity at 45°: 90 x 65 mm Saw blade speed: 2000 rpm Bledpfsb N Eicsx Aahjd Drive motor: 380 V, 1.1 kW Required space: 700 x 900 x 1000 mm

Gamybos metai: 1970, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1258, Saw blade diameter: 315 mm Cutting capacity at 90° round: 90 mm Cutting capacity at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatically steplessly adjustable Cut length: 5 - 1580 mm Bljdpfx Aeh I Dvneahod Saw drive: 380 V, 1.8/2.5 kW Space requirements: 2300 x 1000 x 2800 mm Weight: 940 kg

Sąlyga: geras (naudotas), Gamybos metai: 2000, High-performance universal metal circular saw automatic Circular saw - automatic Eisele PSU 450 CNC 2 Saw blade diameter: 450 mm Cutting diameter: 150 mm Bedpfx Aajvxkc Iehsld Miter cutting – all positions +/-45° Saw motor: 3.6 kW

Sąlyga: geras (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 2038, Offer 24272 Technical Data: - Saw blade dimension: 300 mm - Saw blade speed: 2800 rpm - Cutting capacity - at 90°: 160 x 20 mm 100 x 80 mm - at 45°: 100 x 40 mm - Drive: 400 V / 1.5 kW - Space requirement (approx.): W 400 x H 800 x D 600 mm - Weight (approx.): 80 kg Bedpjt H Ibmsfx Aahsld - Machine stand: W 900 x H 750 x D 500 mm

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 9182, Offer 23168 Technical specifications: - Notching options + mitre cuts on 3 levels - Perpendicular, single-sided, double-sided, and triple-sided bevels Bjdpsmb U E Ajfx Aaheld - Can be used as a shifting cross-cut saw - Pneumatic profile clamping; machining with semi-automatic saw units - Saw blade dimensions – vertical: 500 x 3.5 x 40 mm, positive – horizontal: 500 x 3.5 x 40 mm, negative - Notch width / notch height at 90°: 300 / 285 mm - Vertical saw blade: 60° - 90° - 25°, motorized positioning with digital display - Horizontal saw blade swing range with vertical saw blade: 45° - 90° - 45°, motorized positioning with digital displays - Notch height adjustment with digital displays - Profile stop shoulder manually swivels 30° - 90° - 45° - Pneumatic coolant spray system - Air connection: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirement (approx.): W 2400 x H 2000 x D 1400 mm - Weight (approx.): 1200 kg

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 250-19, Pasiūlymas 25283 Techniniai duomenys: - Pjūklo disko greitis reguliuojamas dažniu labai preciziškam pjovimui - Pjūklo disko skersmuo: 200 mm - Automatinis darbo ciklas Bedow Nhumopfx Aahsld - Spaudimo ribotuvas su SICO skaitikliu stiklui spaudimo jėgos nustatymui – simuliacija - Pneumatinė jungtis: 6 bar - Pavara: 400 V / 0,8 kW - Reikalinga vieta: apie P 400 x A 1200 x G 700 mm - Svoris: apie 80 kg - Mašinos stovas

Sąlyga: geras (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 9155, Offer 24245 Technical specifications: - Pneumatic feed of the milling unit - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop, left and right 20 – 90 – 20° - Milling spindle speed 2,800 rpm - Drive 400 V / 2.2 kW - Compressed air connection 6 – 8 bar - Air consumption per working cycle approx. 10 l Bljdpfx Ajtq Taksahjd - ELGO digital display for material cross stop - Pneumatic profile clamping - Spray device - Required space approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 252-19, Pasiūlymas 25269 Techniniai duomenys: - Pjūklo disko greitis reguliuojamas dažnio keitikliu itin smulkiam pjovimui - Pjūklo disko skersmuo 200 mm - Automatinis darbo ciklas - Presavimo atrama su SICO skaitikliu stiklui spaudimo slėgiui nustatyti – simuliacija - Pneumatinė jungtis 6 bar - Pavara 400 V / 0,8 kW - Užimama vieta apie Pl 400 x A 1200 x G 700 mm - Svoris apie 80 kg - Staklių stovas Bledpfxow R S Nwe Aahsd

Sąlyga: geras (naudotas), Gamybos metai: 2002,

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Complete overhaul 2025 Saw blade: 350 - 400 mm Motor power: 6.5 / 8.5 kW Speed: 1500/3000 rpm Cutting speed: 1650 – 3800 m/min Saw blade height adjustment: electronic Working area, square max.: 120x120 mm Working area, flat max.: 200x100 mm Working area, flat max.: 250x70 mm (extra-wide only) Working area, round max.: 130 mm Saw feed: 0 – 40 mm/s, infinitely variable Cut-off length: 5–600 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Bsdpfx Aaexpqzhohjld Weight approx. 1300 kg Dimensions (LxWxH): 1800mm x 1300mm x 1950mm The machine will be completely overhauled in our facility and will then be in as-new condition. Among other things, the following components will be renewed: - Conversion to PLC control - Upgrade to Siemens HMI operator interface - Conversion to ball screw with servo control - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is additionally equipped with: - Soundproof enclosure - Splitter extension (for superior cut surfaces without drag marks) Optional: - Multi-clamp device for parallel sawing of multiple workpieces - Flat magazine for the automatic feed of raw material up to 6m length - 7.5 kW motor - 12 kW motor - Delivery and installation at your facility - Operator training for your staff

Sąlyga: naudotas, CIRCULAR MIT AUTOMATISCHEM VORSCHUB Bljdpfs Dv Rajx Aahjd Technische Daten: SCHEIBENDURCHMESSER 380 mm Hinweise: Maschine befindet sich in Deutschland