Durma pirkti naudotą (204)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
DURMA
Mažas skelbimas
Austrija
963 km
3 ritinėliai asimetriškas lenkimas
DURMAMRB-S 2506
Skambinti
Sąlyga: naujas, Sheet length: 2530 mm
Sheet thickness: 6 mm
Bending capacity: 5 mm
Total power requirement: 5.5 kW
Weight approx.: 3750 kg
Dimensions (LxWxH): 4250 x 1,200 x 1,250 mm
Roll diameter: 190 mm
• 3 rolls
• Asymmetrical roll arrangement – with pre-bending
• Swing-out upper roll to the front
• Motor-driven right-left control
• Conical bending possible via tilting of the rear roll
Itsdpfed Ab E Uox Af Ijb
• Foot pedal operation
• Hardened rolls
• Digital display
(Example photo)
Catalogue available via the following link:
Mažas skelbimas
Austrija
963 km
4 ritinių hidraulinis lenkimas
DURMAHRB-4 2513
Skambinti
Sąlyga: naujas, Pre-bending: 10.0 mm
Sheet length: 2550 mm
Sheet thickness: 13.0 mm
Total power requirement: 15.0 kW
Approx. weight: 10.6 t
Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m
Image similar to actual product
Bending capacity: 13.0 mm
» at 3x top roller diameter
Pre-bending: 10.0 mm
» at 1.5x top roller diameter
Top roller diameter: 270 mm
Lower roller diameter: 250 mm
Side roller diameter: 220 mm
Max. opening: 50 mm
Working height: 1,155 mm
• Fully hydraulic drive of top and bottom rollers via planetary gearbox
• Digital display for side roller positions
• Hydraulic drop-end bearing
• Infinitely variable rolling speed
• Conical bending device
• Hardened rollers
• Hydraulic adjustment of side rollers, synchronized via PLC
• Hydraulic adjustment of lower roller via torsion shaft
Itoded Ab H Iepfx Af Isb
• Pressure-adjustable lower roller
• Electrical and hydraulic overload protection
• Mobile control console
• Machine and equipment comply with CE regulations
See catalog at the following link:
Important points for conical rolling:
• The maximum sheet thickness is 50% of the nominal capacity
• The cone length must be max. 30% or more than 60% of the roller length
• Hardened rollers are recommended
Mažas skelbimas
Austrija
963 km
4 ritinėliai, hidrauliniai lenkimo
DURMAHRB-4 3016
Skambinti
Sąlyga: naujas, Pre-bending: 13.0 mm
Sheet length: 3,100 mm
Iedpfxsd Auaco Af Istb
Sheet thickness: 16.0 mm
Total connected load: 17.5 kW
Approx. weight: 11.6 t
Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m
Image similar to actual product
Bending capacity: 16.0 mm
» at 3x upper roll diameter
Pre-bending: 13.0 mm
» at 1.5x upper roll diameter
Upper roll diameter: 300 mm
Lower roll diameter: 270 mm
Side roll diameter: 210 mm
Max. opening: 50 mm
Working height: 1,140 mm
• Fully hydraulic drive of upper and lower rolls via planetary gearboxes
• Digital display for side roll positions
• Hydraulic drop-end bearing
• Cone bending device
• Hardened rolls
• Hydraulic adjustment of side rolls, synchronized via PLC
• Hydraulic adjustment of lower roll via torsion shaft
• Pressure-adjustable lower roll
• Electric and hydraulic overload protection
• Mobile control console
• Operating manual in GERMAN and ENGLISH
• Machine and equipment conform to CE regulations
Important points for cone rolling:
• Maximum sheet thickness is 50% of the rated capacity
• Cone length may be max. 30%, or must be more than 60%, of the roll length
• Hardened rolls are recommended

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Wijchen
1 253 km
Lakštinės žirklės Durma MS-C 2004 2015
DurmaMS-C 2004
Skambinti
Sąlyga: naudotas, Gamybos metai: 2015, bendras ilgis: 2 700 mm, bendras plotis: 2 300 mm, bendras aukštis: 1 350 mm, Svoris: 2 800 kg
Kaina: Pagal užklausimą
- Pagaminimo metai: 2015
- Dokumentacija prieinama: Taip
- CE žymėjimas: Taip
- CE sertifikatas: Ne
- Serijos numeris: 151107050
- Valdymas: CNC
- Valdymo sistemos tipas: NC-10
- Pavaros tipas: Ekscentrinis
- Konstrukcija: Giljotina
- Galia [kW]: 7,5
- Maks. lakšto storis [mm]: 4
- Maks. darbo plotis [mm]: 2050
- Atramos gylis [mm]: 750
- Transportavimo matmenys: 2700 mm x 2300 mm x 1350 mm (i x p x a)
Itjdjwnix Sjpfx Af Ijb
- Transportavimo svoris [kg]: 2 800 kg
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM/PVM atskaita: PVM atskaitomas įmonėms
Pristatymas ir įrenginių priėmimas galimas bet kuriuo metu iš visos pramonės srities
Lukas van Rossum
Mažas skelbimas
Pietarsaari
949 km
Lenkimo presas
DURMAE 1240
Skambinti
Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 3 300 h, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: Cybelec, darbinis plotis: 1 200 mm, Techniniai duomenys:
Bendroji informacija
Itedsxzi Nbspfx Af Iob
Gamintojas: Durma
Modelis: E 1240
Metai: 2008
Paskirtis: Lankstymas
Staklių tipas: Hidraulinis lenkimo presas
Ašių skaičius: 4
Valdymo blokas: CYBELEC DNC 880S
Galingumas ir judesiai
Lankstymo ilgis: 1200 mm
Eiga: 160 mm
Staklių matmenys
Gylis: 1500 mm
Aukštis: 2400 mm
Svoris: 2900 kg
Mažas skelbimas
Austrija
945 km
Paspauskite stabdį - hidraulinis
HESSE by DURMAAD-S 40220
Skambinti
Sąlyga: naujas, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €100,920
Leasing rate: €1,907.39
Pressing force: 220 tons
Bending length: 4050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Distance between uprights: 3600 mm
Side frame depth: 450 mm
Installation height: 530 mm
Drive concept: Hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oil tank: 250 l
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 3000 mm
Weight: 14,750 kg
Standard equipment:
- 3 axes (Y1, Y2, X)
- CNC control DT-15
- 15" 2D graphical display
- Intuitive touch-screen operation (easy bend contour drawing with finger)
- User-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic flat length calculation for sheet metal blanks
- Graphical product and tool memory
- Correction functionality
- USB interfaces for backup and program transfer
- PC software allowing programs to be written on a PC and then transferred to the machine via USB
- Servo-driven backgauge on linear guides and ball screws
- Backgauge stop blocks on double linear guides
- CNC-controlled crowning
- Upper tool 1010/A/75°, segmented and offset
- 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm)
- Fiessler AKAS laser safety device mounted on upper beam
- Sheet support arms on linear guide
- Equipment according to CE regulations
- Oil fill
- Operating manual in GERMAN or ENGLISH
BENEFITS OF THE AD-S SERIES:
- Increased stroke, installation height, and throat depth
- Higher approach and return speed of the upper beam
- Higher backgauge speed
- Backgauge fingers on double rather than single linear guides
- More available options, e.g., additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem version, alternative CNC controls…
Itodpjwirwgefx Af Ijb
OPTIONS:
- R-axis
- R/Z1/Z2 axes
- DBend, 3D CAD/CAM import and simulation software (STEP, IGES, and DXF file import)
- CNC control SKY22
- CNC control Delem DA66 S
- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
- Quick-action clamping levers for the upper tool
Mažas skelbimas
Trittau
890 km
PRESS STABDYS
DURMAHAP 30120
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, eigos ilgis: 160 mm, spaudimo jėga: 120 t, Hydraulic Press Brake
Manufacturer: DURMA Model: HAP 30120
Year: 1996
Technical Details
Manufacturer: DURMA
Model: HAP 30120
Year of manufacture: 1996
Pressing force: 120 t
Working length: 3050 mm
Iedpfx Asu Iarbjf Istb
Stroke: 160 mm
Motor power: 11 kW
Dimensions: L 4,150 x W 1,950 x H 2,600 mm
Weight: 7.5 t
Equipment
• CNC-controlled backgauge
• Insertion depth adjustable via controller
• Controlled axes: X, Y
• 2 support arms
• Technical documentation
• Tooling:
o Multi-V die V12, V20 (slightly damaged), V13, V16, V45, V15, V10, V65
Length 3,050 mm
o Upper tool, slightly goosenecked, H 150 mm, L 2,970 mm, segmented
All information is supplied without guarantee.
A demonstration is possible at any time in our showroom.
Mažas skelbimas
Dortmund
1 157 km
Rankinis pasukamas lenkimo / sulankstymo staklės
DURMAHCK 1000/1,5
Skambinti
Sąlyga: labai geros būklės (naudotas), Working width: 1010 mm
Maximum sheet thickness at 370 N/mm²: 1.5 mm
Upper beam opening: 80 mm
Itjdpfx Afowg Ru Es Isb
Minimum bending width: 10 x s mm
Minimum internal radius: 1.5–2 x s mm
Adjustment range of bending beam: approx. 40 mm
Maximum bending angle: 130°
Dimensions (L x W x H): 1650 x 500 x 1400 mm
Weight: 380 kg
Accessories / Special Features:
• Upper tool, 45° bending rail
• Flat rail on bending beam
• Degree scale with stop
• Counterweight balancing
• Heavy-duty cast iron design
• Easy adjustment of upper beam via spindle
• Versatile range of applications
• Bending tools suitable for narrow and wide sheets, allowing for precision bending
• Angle adjustment with degree scale
• Effortless bending thanks to counterweight
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
DE - 44143 Dortmund - Wambel
Mažas skelbimas
Werdau
913 km
Giljotinos žirklės
DURMA
Skambinti
Sąlyga: naujas, Standard equipment:
- D-Touch 7 touchscreen CNC control unit
- 50 mm throat depth
- 1,000 mm rear gauge with ball screw spindle
- Plastic inserts for holddown clamps (material-friendly)
- 1 side stop L = 1,500 mm, with scale, T-slot & tilting stop
- 2 support arms L = 1,000 mm, with T-slot and tilting stop
- Table sheets with ball rollers
- Infinitely adjustable cutting length
- Manual blade gap adjustment
- Automatically retractable rear gauge
- Cutting line illumination
- Upper blade can be rotated twice, lower blade four times
Special accessories:
- Light curtain finger guard
- 350 mm throat depth
- 500 mm throat depth
- Pneumatic sheet support device 'Durma I'
- Pneumatic sheet support device without sheet return 'Durma IV'
- Rear sheet guide
Itodon Urhvjpfx Af Isb
- 1,250 mm rear gauge
- Hydraulic anti-rotation device for SBT 3016 and SBT 4013
- Additional support arm, L = 2 m, with vertical support
- Additional support arm, L = 3 m, with vertical support
- Extension arm, L = 2 m, with vertical support
- Extension arm, L = 3 m, with vertical support
- Side stop extension, L = 2 m, with vertical support
- Side stop extension, L = 3 m, with vertical support
- Right side stop, L = 1,500 mm, with scale and T-slot, with vertical support
- Ball insert in side stop or support arms
- Adjustable angle stop 0–180°
- CNC-controlled, motorized blade gap adjustment
- Laser cutting line
- Spare blades – 1 set of upper and lower blades
- Oil cooler
- Special paint finish
- Control panel on the opposite side
- Oil heating
- Control cabinet air conditioning
DURMA D-Touch 7
- 7-inch color touchscreen
- USB interface
- Ethernet: RJ-45 10/100M
- Integrated database for automatic blade gap and cutting angle adjustment depending on material and sheet thickness
- Program creation
- Stroke counter
- User-friendly
- Fast data entry
Control system:
- DURMA D-Touch 7
- 7-inch color touchscreen
- USB interface
- Ethernet: RJ-45 10/100M
- Integrated database for automatic blade gap and cutting angle adjustment depending on material and sheet thickness
- Program creation
- Stroke counter
- User-friendly
- Fast data entry
Are you interested in this specific machine model or do you have any specific questions about it?
Feel free to send us a message via the contact form. We will respond promptly!
Mažas skelbimas
Werdau
913 km
Giljotinos žirklės
DURMA
Skambinti
Sąlyga: naujas, Standard Equipment
- EZM9910 control unit (standard on MS 2004, 2504, 3004)
- Manual backgauge with 550 mm (standard on 1303, 2003, 2525)
- 750 mm motorized backgauge programmable via control unit (standard on 2004, 2504, 3004)
- Plastic inserts for hold-downs (gentle on material)
- 1 side stop and 2 sheet support arms
- Finger guard
- Portable foot switch with emergency stop button
- Spring-loaded stop in T-slot of support arms (standard on MS 2004, 2504, 3004)
- Recirculating ball screw (standard on MS 2004, 2504, 3004)
- Table plates with ball rollers (standard on MS 2004, 2504, 3004)
- Upper and lower blade rotatable twice (MS 1303, 2003, 2525)
- Upper blade rotatable twice, lower blade rotatable four times (MS 2004, 2504, 3004)
Optional Accessories:
- D-Touch 7 touchscreen CNC control unit
- 750 mm motorized backgauge programmable via control unit (option for MS 1303, 2003, 2525)
- 1000 mm motorized backgauge programmable via control unit
- Pneumatic sheet support device
- Adjustable angle gauge 0-180°
Itedon Tpifepfx Af Ijb
- Additional support arm L = 2 m with vertical support
- Additional support arm L = 3 m with vertical support
- Extension arm L = 2 m with vertical support
- Extension arm L = 3 m with vertical support
- Side stop extension L = 2 m with vertical support
- Side stop extension L = 3 m with vertical support
- Cut line illumination (for MS 2004, 2504, 3004)
- Spare blade set (upper and lower blades)
- Special paint finish
Control System:
EZM9910 control unit (standard on MS 2004, 2504, 3004)
DURMA D-Touch 7 (optional)
- 7" color touchscreen
- USB interface
- Ethernet: RJ-45 10/100M
- User-friendly
- Fast data entry
- Easy connection
- Unlimited material types
Are you interested in this machine model or do you have any specific questions? Please send us a message via the contact form. We will get back to you promptly!
Mažas skelbimas
Werdau
913 km
Giljotinos žirklės
DURMA
Skambinti
Sąlyga: naujas, Standard equipment:
- D-Touch 7 touchscreen CNC control unit
- CNC-controlled motorized blade gap adjustment via upper blade (up to VS 4013)
- CNC-controlled motorized blade gap adjustment via lower blade (patented) (from VS 4016)
- Plastic inserts for hold-downs (gentle on material)
- Variable cutting length adjustment via CNC
- Cutting angle adjustment via CNC
- Table plates with ball rollers
- Backgauge on ball screw spindles, 1000 mm
- Folding finger guard over 1000 mm
- 1 side stop L = 1500 mm, with scale, T-slot & flip stop
- 2 support arms L = 1000 mm, with T-slot & flip stop (up to VS 3020)
- 3 support arms L = 1000 mm, with T-slot & flip stop (from VS 4006 to VS 4020)
- 5 support arms L = 1000 mm, with T-slot & flip stop (from VS 6006 to VS 6016)
- Cutting line illumination
- Upper and lower blades rotatable four times (usable on 4 sides)
Optional accessories:
Itedpsn Ut Stjfx Af Ijb
- Light curtain for finger protection
- 500 mm throat depth
- Pneumatic sheet support system "Durma I"
- Pneumatic sheet support system without sheet return "Durma IV"
- Sheet support system with conveyor belt and scrap container
- CNC feeding system
- Rear sheet chute
- Backgauge 1250 mm
- Hydraulically folding backgauge
- X1, X2 axis control
- Adjustable angle gauge 0–180°
- Additional support arm L = 2 m with vertical support
- Additional support arm L = 3 m with vertical support
- Extension arm L = 2 m with vertical support
- Extension arm L = 3 m with vertical support
- Side stop extension L = 2 m with vertical support
- Side stop extension L = 3 m with vertical support
- Right side stop L = 1500 mm, with scale, T-slot and vertical support
- Ball insert in side stop or in support arms
- CNC front feeding system for 3 meters
- Laser cutting line
- Spare blades (standard upper & lower blade)
- Spare blades (upper & lower blade, special for stainless steel)
- Oil cooler
- Hydraulic twist minimization for narrow strips
- Manual central lubrication
- Motorized central lubrication
- Special paint finish
- Control panel on opposite side
- Oil heater
- Control cabinet air conditioning
Control system:
- DURMA D-Touch 7
- 7-inch color touchscreen
- USB interface
- Ethernet: RJ-45 10/100M
- Database for automatic blade gap and cutting angle setting according to material type and sheet thickness
- Program creation
- Stroke counter
- User-friendly
- Fast data entry
Are you interested in this specific machine model or have any questions?
Use the contact form to send us a message. We will respond promptly!
Mažas skelbimas
Drachten
1 180 km
PRESS STABDYS
Knuth DurmaAPH 30120
Skambinti
Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1992, Naudota 3 metrų lenkimo staklės Durma (Knuth licencija)
Tipas: APH 30120
Talpa: 3100 x 120 t
1 komplektas įrankių
Itjdpfsxtp Afsx Af Isb
Pagaminimo metai: 1992
Elektrinis gylio nustatymas + elektrinis galinis atmušimas
Mažas skelbimas
Drachten
1 180 km
Plazminis pjoviklis
DURMAPL 30120
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Labai nauja Durma plazma
Tipas PL 30120
Talpa 3000 x 12000 mm
Iodpsxruc Ujfx Af Iotb
Šaltinis Hypertherm XPR300
CNC nuožulnaus pjovimo galva +/- 45 laipsniai
Įskaitant rotacinę ašį vamzdžių pjovimui ø50–ø400 mm
Pilnas su Donaldson ištraukimo sistema
Mažas skelbimas
Slitu
901 km
Hidraulinės giljotininės žirklės
DURMASBT-3013
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, eigos dažnis (maks.): 13 aps./min, maks. lakšto storis: 13 mm, nerūdijančio plieno lakšto storis (maks.): 8 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, atstumas, kurį nuvažiuoja galinis ribotuvas Z ašis: 1 000 mm, galia: 30 kW (40,79 AG), įėjimo įtampa: 400 V, bendras svoris: 12 500 kg, bendras ilgis: 4 280 mm, bendras plotis: 2 300 mm, bendras aukštis: 2 350 mm, paskutinio kapitalinio remonto metai: 2025, Įranga: apsaugos šviesos užtvara, avarinis stabdymas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Kraftig brukt hydraulisk giljotinsaks – Durma SBT-3013 (2014)
Vi tilbyr en brukt, tungt dimensjonert hydraulisk Durma SBT-3013 giljotinsaks som er klar for umiddelbar levering.
Maskinen er konstruert for krevende arbeidsforhold og gir presis skjæring – ideell for verksteder og produksjonsmiljøer hvor tykkere plater og lange snitt er påkrevd.
Tekniske spesifikasjoner:
Årsmodell: 2014
Strømtilførsel: 230V / 400V – enkelt omstillbar med nøkkelbryter i el-skapet
Klippebredde: 3.100 mm
Maks. platetykkelse (bløtt stål ST42): 13 mm
Maks. platetykkelse (rustfritt stål): ca. 8 mm
Slag per minutt: 13
Mål og vekt:
Maskinbredde: ca. 2.300 mm
Total bredde med støttearmer/verneutstyr: ca. 3.600 mm
Lengde: ca. 4.280 mm
Høyde: ca. 2.350 mm
Vekt: ca. 12.500 kg
Funksjoner og fordeler:
Motorisert bakanslag (1.000 mm)
D-Touch 7 styringssystem med berøringsskjerm
16 nedholdere for sikker platelåsing (alle nylig overhalt)
Justerbart knivgap
Robust ramme og solid konstruksjon
Gjennomgående godt vedlikeholdt med nylig hovedservice:
Nytt hydraulikkolje og filtre
Slipte skjær
Overhalte nedholdere
Itodpfx Afoxd H Dno Isb
Ny hovedbryter
Mažas skelbimas
Darwen
1 703 km
DURMA AD-S 40400
DURMAAD-S 40400
Skambinti
Sąlyga: naudotas, Axe ir Status Durma 400T x 4000 mm CNC lenkimo presas, naujas 2023 m., pagrindinis variklis 37 kW, svoris 28 tonų
Itsdox I R Tqspfx Af Iob
Mažas skelbimas
Austrija
945 km
Giljotininės žirklės - mechaninės
HESSE by DURMAMS 1303
Skambinti
Sąlyga: naujas, Būklė: nauja
Pristatymo laikas: apie 8 savaites nuo užsakymo pateikimo
Kilmės šalis: Turkija
Kaina: 14.400 €
Lizingo įmoka: 276,48 €
Pjovimo ilgis: 1.350 mm
Maks. lakšto storis (konstrukcinis plienas): 3 mm
Kėlimo dažnis: 35 kartų/min
Užpakalinė atrama: 550 mm
Variklio galia: 3 kW
Atraminės rankos: 2 vnt.
Stalo aukštis: 850 mm
Stalo plotis: 400 mm
Ilgis: 1.900 mm
Plotis: 1.350 mm
Aukštis: 1.260 mm
Svoris: 1.060 kg
Rankinė užpakalinė atrama
Itedpfx Aewiq Epjf Iob
Automatiškai veikiantis prispaudėjas
Prispaudėjas su guminiais dangteliais
Mobilus kojinis jungiklis
Šoninė atrama
2 vnt. lakštų atraminės rankos
Šviesos barjeras mašinos galinėje dalyje
Eksploatavimo instrukcija vokiečių ir anglų kalbomis
Mažas skelbimas
Austrija
945 km
Hidraulinės giljotininės žirklės
HESSE by DURMASBT 3016
Skambinti
Sąlyga: naujas, Condition: new
Delivery time: approx. 12-14 weeks from order
Country of origin: Turkey
Price: €92,100
Leasing rate: €1,740.69
Cutting length: 3,100 mm
Max. sheet thickness – mild steel: 16 mm
Max. sheet thickness – stainless steel: 10 mm
Throat depth (side frame): 350 mm
Strokes per minute: 10
Cutting angle: 2°
Number of hold-downs: 14
Hold-down pressure: 61 t
Backgauge: 1,000 mm
Backgauge speed: 200 mm/s
Motor power: 37 kW
Oil tank: 410 l
Support arms: 2 pcs.
Table height: 818 mm
Table width: 550 mm
Table length: 3,580 mm
Length: 4,550 mm
Width: 2,250 mm
Total width incl. support arm and rear safety guard: 3,825 mm
Height: 2,250 mm
Weight: 15,000 kg
Swing cut design
NC pre-selection control D-Touch 7 with touchscreen for backgauge, cutting length, piece count, USB connection
Motorized backgauge up to 1,000 mm on ball screw spindles, tiltable
Clear control panel mounted on swing arm
Hydraulic hold-downs arranged close to the cutting edge
Foot switch
Central manual blade gap adjustment
Cutting line illumination
Wide support table with ball transfers
Piece counter
Single and continuous stroke
Tiltable finger guard 1,000 mm
1 side stop 1,500 mm with scale, T-slot, and cam
2 sheet support arms 1,000 mm with T-slot
Easy blade change and regrinding
Adjustable cutting length for efficient operation
Lower blade can be used on 4 sides
Upper blade can be used on 2 sides
Oil filling
Light barriers at the rear of the machine
Qualified customer service
Operating instructions in GERMAN and ENGLISH
Equipment in accordance with CE regulations
(Symbolic photo)
Ijdpfx Afjwir Dys Ijtb
WE HAVE MORE THAN 850 REFERENCES!
Mažas skelbimas
Austrija
945 km
Giljotininės žirklės - mechaninės
HESSE by DURMAMS 2004
Skambinti
Sąlyga: naujas, Būklė: nauja
Pristatymo laikas: apie 10 savaičių nuo užsakymo
Kilmės šalis: Turkija
Kaina: 29 000 €
Lizingo įmoka: 553,9 €
Pjovimo ilgis: 2050 mm
Maks. lakšto storis - konstrukcinis plienas: 4 mm
Eigos skaičius: 42 kartai/min
Galinė atrama: 750 mm
Variklio galia: 7,5 kW
Stalo aukštis: 800 mm
Iedewir Dtepfx Af Iotb
Stalo plotis: 450 mm
Ilgis: 2700 mm
Plotis: 2300 mm
Aukštis: 1350 mm
Svoris: 2800 kg
Varikliu valdoma galinė atrama su rutuliniu sraigtu ir išankstinio pasirinkimo valdikliu DT5
Paspaudiklis su guminiu gaubtu
Šoninė atrama su T formos grioveliu
2 lakštų atraminės svirtys
Rutuliai stalo viduje
Matavimo juosta
Pasukamas ribotuvas
Šviesos užuolaidos mašinos gale
Pjovimo linijos apšvietimas
Naudojimo instrukcija VOKIEČIŲ ir ANGLŲ kalbomis
Mažas skelbimas
Austrija
945 km
Giljotininės žirklės - mechaninės
HESSE by DURMAMS 3004
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Būklė: nauja
Pagaminimo metai: 2025
Sandėlio numeris: 090080
Pristatymo terminas: iškart, galimas tarpinis pardavimas
Kilmės šalis: Turkija
Kaina: 32.100 €
Lizingo įmoka: 613,11 €
Sandėlyje: 1 vnt.
Itjdpfxswirvpj Af Isb
Pjovimo ilgis: 3100 mm
Didž. lakšto storis - konstrukcinis plienas: 4 mm
Smūgių skaičius: 42 1/min
Pjovimo kampas: 1,5°
Galinė atrama: 750 mm
Variklio galia: 7,5 kW
Atraminės svirtys: 2 vnt.
Stalo aukštis: 800 mm
Stalo plotis: 450 mm
Ilgis: 3700 mm
Plotis: 2300 mm
Aukštis: 1350 mm
Svoris: 3730 kg
Motorizuota galinė atrama su rutuline sraigtine pavara ir DT5 išankstinės parinkties valdikliu
Prispaudėjas su guminiais antgaliais
Šoninė atrama su T formos grioveliu
2 lakštų atramos svirtys
Kamuolys įmontuotas stale
Matavimo juosta
Atverčiamoji atrama
Šviesos barjeras galinėje mašinos dalyje
Pjovimo linijos apšvietimas
Naudojimo instrukcija VOKIEČIŲ ir ANGLŲ kalbomis
Mažas skelbimas
Austrija
945 km
Paspauskite stabdį - hidraulinis
HESSE by DURMAAD-Servo 30220
Skambinti
Sąlyga: naujas, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €112,800
Leasing rate: €2,131.92
Press force: 220 tons
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axes
Stroke: 265 mm
Distance between uprights: 2600 mm
Throat depth: 410 mm
Installation height: 530 mm
Drive system: hydraulic
Rapid traverse Y-axis: 200 mm/s
Working speed Y-axis: 12 mm/s
Return speed Y-axis: 180 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Iedpewirthefx Af Istb
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12,250 kg
ONE SERVO MOTOR AND PUMP PER CYLINDER
Standard equipment:
- 4 axes (Y1, Y2, X, and R)
- CNC control SKY 22
- Full HD graphics display 21.5” with 2D and 3D visualization of the programmed workpiece
- Intuitive touch-screen operation (easily draw bending contours with your finger)
- User-friendly programming in dialog mode, selectable in 2D or 3D mode
- 2D and 3D simulation of the bending process
- Automatic tool selection in 3D mode
- Automatic calculation of the developed length for sheet blanking
- Automatic calculation of bending sequences
- Graphic product and tool storage
- Correction capability
- USB ports and Ethernet connection for import, backup, and program export
- Windows operating system
- Import support for IGES, STEP, DXF files
- Servo-driven backgauge on linear guides and recirculating ball screws
- Backgauge finger blocks on double linear guides
- CNC-controlled crowning
- Upper tool 1010/A/75°, segmented and offset
- 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm)
- Laser safety device Fiessler AKAS mounted on upper beam
- Sheet support arms on linear guides
- Equipment in accordance with CE directives
- Oil fill
- Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- The hydraulics operate only during upper beam movement
- Low energy consumption
- Low noise
- High speed
Options:
- Z1/Z2 axes
- CNC control Delem DA-66 S
- CNC control DELEM DA-69S 3D including Profile-S PC software with 3D file import
- Quick-release clamping lever for upper tool
Mažas skelbimas
Austrija
945 km
Žiedinio profilio lenkimo staklės
HESSE by DURMAPBH 80
Skambinti
Sąlyga: naudotas, Gamybos metai: 2023, Condition: used
Year of manufacture: 2023
Stock number: 9691
Delivery time: immediate, subject to prior sale
Country of origin: Turkey
Price: €24,600
In stock: 1
Shaft diameter: 85 mm
Roller diameter: 247 mm
Driven rollers: 3
Motor power: 7.5 kW
Flat bar vertical (section / min. diameter): 80x20 mm / 500 mm; 30x10
Flat bar horizontal (section / min. diameter): 120x30 mm / 650 mm; 50x10
Square bar (section / min. diameter): 50x50 mm / 500 mm; 30x30
Round bar (section / min. diameter): Ø 50 mm / 500 mm; Ø 20 mm
Tube (section / min. diameter): Ø 100x2.5 mm / 1,300 mm
Rectangular tube vertical (section / min. diameter): 80x40x4 mm
Square tube (section / min. diameter): 70x70x4 mm
Angle steel leg outside (section / min. diameter): 80x8 mm / 1,200 mm; 30x3
Angle steel leg inside (section / min. diameter): 80x8 mm / 800 mm; 30x3 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
Demonstration machine / as new condition
Net price
3 driven rollers (hydraulic motor and planetary gearbox)
Robust steel welded construction
Hydraulic adjustment of lower rollers
Digital display of lower roller positions
Smooth rollers
Lateral straightening rolls (hydraulic forward/reverse, manual rest)
Can be used horizontally and vertically
Control panel for forward and reverse
Machine and equipment according to CE regulations
Including option: infinitely variable speed
Iodpfxswirkme Af Istb
WE HAVE MORE THAN 235 REFERENCES!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Austrija
945 km
Paspauskite stabdį - hidraulinis
HESSE by DURMAAD-S 60220
Skambinti
Sąlyga: naujas, Condition: New
Delivery time: approx. 14 - 16 weeks from order
Country of origin: Turkey
Price: €137,900
Leasing rate: €2,606.31
Press force: 220 tons
Bending length: 6050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Distance between side frames: 5100 mm
Throat depth: 450 mm
Installation height: 530 mm
Drive system: hydraulic
Rapid approach speed Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oil tank: 250 l
Motor: 22 kW
Length: 7500 mm
Width: 1770 mm
Height: 3350 mm
Weight: 20,800 kg
3 axes (Y1, Y2, X)
CNC CONTROL DT-15
- 15" 2D graphic display
- Intuitive touch screen operation (easy bending contour drawing with your finger)
- User-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic calculation of flat length for sheet cutting
- Graphic product and tool memory
- Correction function
- USB ports for backup and program transfer
- PC software to create programs on PC and transfer them to the machine via USB
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks mounted on double linear guides
CNC-controlled crowning system
Upper tool 1010/A/75°, segmented and offset
4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
Fiessler AKASam laser safety device mounted on upper beam
Sheet support arms on linear guides
CE compliant equipment
Oil filled
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE AD-S:
- Increased stroke, installation height, and throat depth
- Higher approach and return speed of the upper beam
- Higher backgauge speed
- Backgauge fingers on double, not single, linear guides
- More options available, e.g.: additional backgauge axes (Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, different CNC controls…
PRICE FCA TURKEY
Options:
R-axis
Itodpfx Aowiq R Sjf Isb
R/Z1/Z2-axis
DBend 3D CAD/CAM import and simulation software (import of step, iges, and dxf files)
CNC control SKY22
CNC control Delem DA66 S
DA-69S 3D incl. PC Software Profile-S with 3D file import capability
Quick-release lever for upper tool
Mažas skelbimas
Austrija
945 km
CNC plazminio pjovimo sistema
HESSE by DURMAPL-C 2060
Skambinti
Sąlyga: naujas, Condition: New
Delivery time: approx. 12 - 14 weeks from order
Country of origin: Turkey
Price: €163,101
Leasing rate: €3,082.61 per month
Working area: 2000 x 6000 mm
Plasma power source: Hypertherm XPR 170 CORE
Max. sheet thickness - Mild steel: 60 mm
Max. sheet thickness - Stainless steel: 38 mm
Max. sheet thickness - Aluminium: 38 mm
Max. piercing thickness - Mild steel: 35 mm
Max. piercing thickness - Stainless steel: 22 mm
Max. piercing thickness - Aluminium: 25 mm
Current: 170 A
Max. cutting speed: 12 m/min
Positioning speed: 35 m/min
Positioning accuracy: +/- 0.1 mm
Repeatability: 0.1 mm
Weight: 6,000 kg
HyPerformance plasma source Hypertherm XPR 170 CORE with True Hole technology
Automatic gas console
Plasma torch height control
Laser for zero point determination
Collision protection (torch break-away system)
CNC control with AURORA plasma cutting software
Lantek CAD/CAM software incl. nesting
Filter unit control via CNC
Ijdpfxewiq Hae Af Istb
Remote diagnostics via network
Sheet alignment function
Operating manual available in GERMAN and ENGLISH
Options:
- Extraction with filter
- Additional charge for Optimix instead of Core
- Further options such as 3D cutting head, drilling head, pipe cutting device, oxy-fuel torch, Durma Cloud, etc. on request.
Mažas skelbimas
Austrija
945 km
Giljotininės žirklės - mechaninės
HESSE by DURMAMS 3004
Skambinti
Sąlyga: naudotas, Gamybos metai: 2021, Condition: used
Year of manufacture: 2021
Stock number: 90004
Delivery time: prompt, subject to prior sale
Country of origin: Turkey
Price: €22,600
In stock: 1 unit
Cutting length: 3100 mm
Max. sheet thickness (mild steel): 4 mm
Strokes per minute: 42 1/min
Cutting angle: 1.5°
Backgauge: 750 mm
Motor power: 7.5 kW
Itodpfowiqqxjx Af Iob
Support arms: 2 pcs.
Table height: 800 mm
Table width: 450 mm
Length: 3700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 3730 kg
Motorized backgauge on ball screw spindle with DT5 pre-selection control
Hold-down devices with rubber pads
Side stop with T-slot
2 sheet support arms
Ball transfer in table
Measuring tape
Swing-up stop
Light barriers at rear of machine
Cutting line illumination
Operating manual in GERMAN
Mažas skelbimas
Austrija
945 km
Paspauskite stabdį - hidraulinis
HESSE by DURMAPBF 30200
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Condition: New
Year of manufacture: 2024
Stock number: 8319
Delivery time: Prompt, subject to prior sale
Country of origin: Turkey
Price: €77,990
Leasing rate: €1,326.78
In stock: 1 unit
Special price: €70,200
Press force: 200 t
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axes
Stroke: 210 mm
Distance between uprights: 2550 mm
Throat depth: 250 mm
Installation height: 445 mm
Drive type: Hydraulic
Rapid traverse Y-axis: 100 mm/s
Working speed Y-axis: 7 mm/s
Return speed Y-axis: 73 mm/s
Backgauge travel X-axis: 620 mm (with optional R-axis)
Backgauge speed X-axis: 250 mm/s
Table height: 858 mm
Table width: 104 mm
Oil tank: 150 l
Motor power: 15 kW
Length: 3750 mm
Width: 1390 mm
Height: 2500 mm
Weight: 8160 kg
4 axes (Y1, Y2, X and R axis)
Ijdpswiqp Iofx Af Ijtb
CNC CONTROL DT-10
- 2D graphic display 10”
- Intuitive touch-screen operation (easy drawing of the bending contour with your finger)
- User-friendly dialog-based programming
- Automatic calculation of bending sequences
- Automatic calculation of flat length for sheet cutting
- Graphical product and tool memory
- Correction function
- USB connections for backup and program outsourcing
- PC software for programming on PC, transferable to the machine by USB
CNC-controlled backgauge with linear guides and ball screws
CNC-CONTROLLED CROWNING DEVICE IN TABLE
Intermediates for clamping the upper tool
Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground
Die holder for 60 mm dies
Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground
Laser safety system Fiessler AKAS mounted on upper beam
Sheet support arms
Side and rear safety screens
Equipment in accordance with CE regulations
Oil filled
Operating instructions in GERMAN or ENGLISH
ADVANTAGES OF THE PBF SERIES:
- Compact design
- Cost-effective model due to series production of standardized models, with no compromise on quality or accuracy
OPTION:
Crowning device motorized, adjustable via CNC control
Included:
CNC-controlled R axis (adjustment range in X = 500 mm)
Included:
DBend, 3D CAD/CAM import and simulation software (STEP, IGES, and DXF file import)
WE HAVE MORE THAN 600 REFERENCES!
Palengviname jums paiešką: "durma"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Durma (204)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo



















































































































































































