Droop Rein pirkti naudotą (9)

Sąlyga: naudotas, Gamybos metai: 1978, Stalo dydis 2000 x 700 mm Svoris 18 t Plokštės skersmuo s mm Didžiausias montavimo aukštis 1100 mm Iškyša 800 mm Ašies apsisukimai 31,5 - 1600 aps./min Reikalinga vieta apie 3600 x 3900 x 2950 mm yra daugiau nuotraukų Iodpfjuxf Aaex Afwea

Sąlyga: naudotas, Vertikal-Fräsmaschine Droop & Rein Typ FS130 Verfahrweg X: 2000 mm Verfahrweg Y: 1000 mm Verfahrweg Z: 1000 mm Spindelaufnahme: SA 50 Sensible Spindelausladung: 200 mm Drehzahlbereich: 31,5 bis 1600 U/min Tischgröße: 2400 x 1070 mm Ausladung: 950 mm Isdpfx Afexxl Hdjwea Schwenkkopf Spindelmotor: 22 kW HEIDENHAIN Maßstäbe, 3 Achsen Baujahr: 1976 Neue Schalttafel 2006 Spannung: 380 V Breite: 3500 mm Tiefe: 4700 mm Gesamthöhe: 4500 mm Gewicht: 26 t

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m Ijdpfx Afsvy Ihdjwsa 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 500 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 500 mm, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 20 m/min, veleno greitis (maks.): 7 500 aps./min, stalo plotis: 2 500 mm, stalo ilgis: 5 000 mm, stalo apkrova: 25 000 kg, Droop & Rein FOGS in very good condition - 2014 complete overhaul and retrofit by manufacturer - Ongoing maintenance and component renewal up to the present - Heidenhain ITNC 530 control unit Iodpfx Afsuhqmyewoa - Machine can be inspected under power - Spindle Weiss GmbH 1 HSK 100, spindle hours: 14,267 - Spindle Weiss GmbH 2 HSK 100, spindle hours: 10,559 - Spindle 3 Weiss GmbH HSK 50, spindle hours: 6,788 - 2x longitudinal chip conveyors - Tool changer - Blum laser - 3-way camera, remotely controllable - BA4 setup station - Wireless handwheel - C-axis continuous (infinite rotation) - A-axis +-115 degrees - Special enclosure

Sąlyga: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Commissioning: 1992 Control: Fidia CNC 11 Spindle diameter: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling capacity: 30 kW Spindle taper: SK 50 Quill travel: 200 mm Swiveling range: + / - 45° Iodjrrf Rxjpfx Afwea Traverse paths: X-2400 mm Y-1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 t Total connected load: 55 kW Space requirement: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 t Still under power.

Sąlyga: naudotas, Table unit from a DROOP & REIN gantry milling machine Clamping plate with T-slots made of steel/cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Iedpfxothuzpo Afwja Table height (overall height): 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guideway cover - Originates from a DROOP & REIN gantry milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 pcs. T-slots, 28 mm - Drive via SIEMENS Servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Total length: 9500 mm Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Good condition

Sąlyga: geras (naudotas), Gamybos metai: 1999, X-travel 2400 mm Y-travel 2850 mm Z-travel 1000 mm Control unit: FIDIA C20 Table dimensions (longitudinal): 2200 mm Table dimensions (cross): 1800 mm Table load capacity: 12 t 30-position pallet changer Tool holder: ISI SK-50 Spindle speeds: 5000 rpm Spindle drive power: 30 kW This Droop & Rein ModiMill universal machining center is in good condition and can be inspected under power at the seller’s premises by appointment. Description: - 30-position tool changer: 20 positions ISO SK-50 10 positions HSK 63 - Two milling spindles: SK-50 with 5000 rpm Ijdsvwgphjpfx Afwja HSK 63 with 18000 rpm - Rotary table 2200 x 1800 mm

Sąlyga: geras (naudotas), DROOP & REIN - SZ 100 / Tepimo griovelių tempimo staklės - Didžiausias apdirbamas skersmuo: 140 mm - Veleno anga: 40 mm Iedpfxjw R S Rhe Afwea - Griovelio ilgis vienu traukimu: 100 mm - Atstumas tarp griebtuvo / griebtuvo smaigalio: 350 mm - 3 darbo greičiai - Elektrinė griebtuvo apsauga - Gera bendroji būklė Matmenys: IxPxA 0,9x0,6x1,5 m / Svoris: 300 kg Galimos klaidos ir netikslumai.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 400 mm, Y ašies eiga: 2 850 mm, Z ašies eigos atstumas: 1 000 mm, padavimo ilgis X ašis: 20 000 mm, padavimo eiga Y ašimi: 30 000 mm, padavimo ilgis Z ašis: 20 000 mm, Droop & Rein Modimill, année de construction 2001, commande Fidia C20 Isdpfx Aevk Ubxofwja