Deckel So pirkti naudotą (679)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
DECKEL
mažas skelbimas
Ubstadt-Weiher
1 232 km
Gręžimo staklės
DeckelFP2
Skambinti
Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C
Technical Data:
>> Machine No. 5983, Year of Manufacture approx. 1975
>> Fixed angle table (newly refurbished)
>> Spindle speed: 40 - 2000 rpm
>> Feed and rapid traverse in 3 axes
>> Drive power: 2.2 kW
>> Travel X/Y/Z: 400/200/400 mm
>> Features: vertical & horizontal spindle
>> Extendable vertical and horizontal quills – SK 40
>> Drawbar system S20x2
>> Weight approx. 1100 kg
Accessories and Equipment:
>> 3-axis digital readout K+C, newly installed with manufacturer’s warranty.
Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc.
>> Operating manual for the digital readout
>> Coolant unit
Iodsu I Rm Nepfx Afwoa
About the Machine:
Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.
mažas skelbimas
Düsseldorf
1 215 km
5 ašių - DECKEL MAHO DMU 100P duoBLOCK
DECKEL MAHODMU 100 P duoBLOCK
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2005, veikimo valandos: 48 898 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio svoris (maks.): 2 000 kg, bendras aukštis: 3 400 mm, bendras ilgis: 6 000 mm, bendras plotis: 4 500 mm, sukimosi greitis (min.): 30 aps./min, bendras svoris: 15 800 kg, veleno greitis (min.): 18 000 aps./min, įrankių magazino lizdų skaičius: 40, Year of manufacture: 2005
Isdexur Sxspfx Afwsa
CNC control: Heidenhain iTNC 530
Axes
Travel X-axis [mm]: 1000
Travel Y-axis [mm]: 1000
Travel Z-axis [mm]: 1000
C-axis indexing [°]: 360° (0.001)
A-axis indexing [°]: 130°
B-axis indexing [°]: 0-190°
Feed rates [m/min]: 60
Rapid traverse [m/min]: 60
NC milling/turning table:
Number of pallets: 1
Pallet dimensions [mm]: Ø1100 x 900
Max. workpiece weight [kg]: 2000
Table speed [rpm]: 30
Spindle
Max. spindle speed [rpm]: 18000
Cooling
Coolant supply through spindle [bar]: 40
Tank capacity [L]: 980
High-pressure cooling [bar]: 40-80
Tool system
Tool holder: HSK-A 63
Number of tools in magazine: 40
Tool changer type: Double gripper
Equipment
Electronic handwheel
Chip conveyor
Infrared probe
Rinsing pistol
Blow air through spindle center selectable via M function
Laser tool measurement for tool length and diameter
3D quickSET
Prepared for internal cooling (40/80 bar)
Paper band filter
Machine operating time:
Hours powered on: 144180
Spindle operating hours: 48898
Total power requirement [kVA]: 65
Basic machine: dimensions / weight
Length [mm]: 6000
Width [mm]: 4500
Height [mm]: 3400
Weight [kg]: 15800
mažas skelbimas
Saal an der Donau
1 073 km
Kampinis frezavimo velenas Deckel FP1 ir FP2
DECKEL
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Typ: 2034 Nr. 374, veleno tvirtinimas: MK 2, Angular milling spindle for Deckel FP1 and FP2, D70, D80 mm, suitable for Deckel milling machines FP1 and FP2.
The angular milling spindle is 360-degree rotatable. The spindle is pre-owned but in excellent condition. This is an original Deckel angular milling spindle, Type: 2034, Serial No. 374. The spindle was used exclusively for precision work.
Technical data for the angular milling spindle:
- Tool milling spindle with MK2 tool holder
- For collets type: Morse taper 2 (with internal thread)
The spindle comes with a reducing sleeve.
Reducing sleeve: (for FP1)
- Outer diameter = 80 mm
Isdpfxexk T Hie Afwea
- Inner diameter = 70 mm
(A reducing sleeve is not required for FP2)
Weight:
- Spindle: 6.5 kg
- Reducing sleeve: 0.8 kg
- Total: 7.3 kg
Price: ex works
Payment:
- Cash upon collection or payment in advance
Delivery:
- Shipping via DHL parcel service is possible
- Collection in person is possible
Terms of delivery:
- Delivery according to Machineseeker standard contract for used machinery
- Standard sales contract for used machines from Machineseeker
- A standard contract can be downloaded from Machineseeker
Availability:
- Immediately available.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
mažas skelbimas
Vokietija
1 106 km
Graverio šlifavimo staklės
DECKELS0
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 1998, Spaustuvo skersmuo 17,5 mm
Kūginio spaustuvo vidinis kūgis MK 1, MK 2, Ga
Šlifavimo veleno apsisukimai 2800 aps./min
Bendras galios poreikis 0,25 kW
Mašinos svoris apie 67 kg
Iedpfx Afoxr Raiswoa
Vietos poreikis apie 510 x 565 x 290 mm
Frėziukų šlifavimo staklės su apatine spintele, skirtos frezų arba zondavimo antgalių šlifavimui vidurinėje arba paslinktoje pozicijoje. Dėl dalinės galvutės laikiklio galimi apskritimo judesiai visomis kryptimis ir įrankio ašies išilginis bei skersinis judėjimas. Įrankio tvirtinimo išilginis poslinkis 40 mm, šoninis reguliavimas 10 mm, dalinės galvutės laikiklio precizinis reguliavimas iki šlifavimo veleno 15 mm.
Tai naudota mašina, todėl parduodama be jokios garantijos.
SANDĖLIUOJANTIS PREKYBININKAS SU 1600 m² PARODŲ SALE.
mažas skelbimas
Gescher
1 168 km
Universalus apdirbimo centras
Deckel MahoDMU 100T
Skambinti
Sąlyga: reikia remonto (naudotas), Gamybos metai: 2002, veikimo valandos: 54 981 h, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 1114 000273 3, X ašies eiga: 1 080 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 15 m/min, Y ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 15 m/min, valdiklių gamintojas: Haidenhain, valdiklio modelis: HEIDENHAIN TNC 530, bendras aukštis: 2 500 mm, bendras ilgis: 6 200 mm, bendras plotis: 3 802 mm, stalo plotis: 795 mm, stalo ilgis: 1 500 mm, stalo apkrova: 900 kg, bendras svoris: 9 500 kg, veleno veikimo valandos: 14 170 h, veleno nosis: SK40, įrankių magazino lizdų skaičius: 32, įrankio svoris: 8 000 g, Įranga: dokumentacija / vadovas, drožlių transporteris, Technical Details
Machine: DMG DMU 100T
Year of manufacture: 2002
Control: HEIDENHAIN TNC 530
Spindle taper: SK40
Operating hours: 54,981 h
Travel Paths:
X-axis: 1,080 mm
Y-axis: 710 mm
Z-axis: 710 mm
Isdpjxxamxsfx Afwsa
Weight: approx. 9,500 kg
Additional Equipment:
NC rotary table (Nikken)
Large NC rotary table
Tailstock
Handwheel
Inspection
An inspection under power is possible at any time by appointment.
Condition:
Used condition corresponding to the age and previous use
Known Defects:
Ball screw of X-axis worn / overhaul required
Y-axis likely cable or motor damage
Completed Repairs:
2017 – Handwheel retrofit kit
2022 – Replacement of auger in chip conveyor
2024 – New cylinder/linear guide for tool magazine
2024 – New monitor
Further defects cannot be excluded
Important Note / Disclaimer
The machine is expressly sold as defective, without warranty, without guarantee, and with exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge, but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and with the exclusion of any subsequent negotiation.
mažas skelbimas
Schlüchtern
1 101 km
Įrankių frezavimo staklės
DeckelFP1Aktiv
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 1985, Deckel FP1 Aktiv su 3 ašių Heidenhain skaitmenine indikacija, 3 aktyvios ašys, standus stalas, SK 40 M16 veleno laikiklis. Centrinis tepimas, naudojimo instrukcijos. Geros, darbingos būklės, atvežta iš profesinio mokymo centro. Pagal susitarimą galima parodyti veikiančią.
Iodpjxwunzefx Afwea
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1
with 3-axis Heidenhain Digital Readout Original Condition!!!
Technical Data:
Iedpfsu Nvxmsx Afwoa
>> Machine No. 56560/08, Year of manufacture approx. 1975
>> Fixed angle table
>> Speed: 40 – 2000 rpm
>> Feed on 2 axes
>> Drive power: 1 / 1.5 kW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical quill SK40 and horizontal quill - SK40
>> Drawbar system S20x2
>> Weight approx. 700 kg
Ecvf9Jfv9
Accessories and features:
>> 3-axis Heidenhain digital readout
>> Coolant system
About the machine:
For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels, and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel onsite under power.
mažas skelbimas
Düsseldorf
1 215 km
DECKEL MAHO DMC 60 FD duoBLOCK
DECKEL MAHODMC 60 FD duoBlock
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2015, veikimo valandos: 26 156 h, X ašies eiga: 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 600 mm, valdiklių gamintojas: Siemens 840D, ruošinio ilgis (maks.): 850 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 500 kg, bendras aukštis: 3 100 mm, bendras ilgis: 4 150 mm, sukimosi greitis (min.): 1 200 aps./min, veleno greitis (min.): 12 000 aps./min, Year of manufacture: 2012
CNC control: Siemens 840D
Axes
Travel X-axis mm: 600
Travel Y-axis mm: 700
Travel Z-axis mm: 600
C-axis indexing degrees: 360º (0.001)
B-axis indexing degrees: -30º/180º (0.001)
Feed speed m/min: 60
Rapid traverse m/min: 60
Axis acceleration m/s²: 6/6/5
NC milling/turning table:
Number of pallets: 2
Pallet dimensions mm: Ø630
Max. workpiece size (D x H) mm: Ø630x850
Max. workpiece weight kg: 500
Table speed rpm: 1200
Spindle
Max. spindle speed rpm: 12000
Spindle drive power kW: 35/24 (40% duty cycle/continuous)
Spindle torque Nm: 111/77
Ijdpfsxuiibox Afwoa
Cooling
Coolant supply through spindle bar: 40
Tank capacity liters: 980
Tool system
Tool holder: HSK-A 63
Number of tools in magazine: 60
Tool changer type: Double gripper
With free adjacent tool positions mm: 120
With occupied adjacent tool positions mm: 80
Max. tool length mm: 450
Max. tool weight kg: 15
Chip-to-chip time sec.: 4
Equipment
Electronic handwheel
Chip conveyor
Infrared probe
Rotating inspection windows
Rinsing gun
Operating mode 4
Blow air through spindle center, selectable via M-function
NC rotary swiveling table
3D quickSET
MPC – Machine Protection Control
Machine operating hours:
Power-on hours: 26,156
Spindle operating hours: 16,472
Main machine: Dimensions/Weight
Length mm: 4,150
Height mm: 3,100
Weight kg: 10,000
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 stufenlos
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C, Infinitely Variable Feed, in Light Grey – Excellent Condition
Technical Data:
>> Year of manufacture: 1978 Machine No.: 2101-0465
>> Fixed angle table
>> Spindle speed: 40 - 2000 rpm
>> Infinitely variable feed on 2 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Rapid traverse
>> Travel X/Y/Z: 300/160/340 mm
>> Vertical milling head adjustable on spindle support by 100 mm
Iedpot Aav Ijfx Afwea
>> Vertical and horizontal quill - ISO 40 taper
>> Drawbar system S20x2
>> Weight approx. 700 kg
Equipment and Accessories:
>> 3-axis digital readout system (K&C), newly installed, with manufacturer's warranty and operating manual. The display unit features: reference points, zero point setting, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc.
>> Coolant system
About the Machine:
Offered is a universal milling machine Deckel FP1 in excellent condition. The machine has very little backlash and all the spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is infinitely variable on two axes, and the machine is also equipped with rapid traverse. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 3 Achs Vorschub
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition
Technical Data:
>> Year of manufacture: 1985
>> Machine no.: 2102-2867
>> Swiveling-tilting rotary table (newly ground)
>> Spindle speeds: 40 – 2000 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel X/Y/Z: 300/160/340 mm
>> Vertical milling head adjustable by 100 mm on spindle carrier
>> Vertical quill and horizontal quill – SK40 taper
>> Clamping system: M16
>> Weight approx. 800 kg
Iodst Aarpepfx Afwsa
Accessories and Equipment:
>> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual.
Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc.
>> Coolant device
>> Operator’s manual, spare parts list
About the machine:
For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
Deckel repowered by FPSFP1
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, like new condition!!
Technical data:
>> Machine No.: 2101-51084, year 2011
>> Fixed angle table
>> Spindle speed: 40 - 2000 rpm
>> Power feed on 2 axes
>> Drive power: 1 / 1.5 kW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical quill SK40 and horizontal quill SK40
>> Drawbar system S20x2
>> Weight approx. 700 kg
Accessories and equipment:
>> 3-axis digital readout Heidenhain ND 780
>> Hydraulic machine vice
>> Collets
>> Tool holders
>> Milling cutters
Isdpswpi Dqjfx Afwsa
>> Operating manual
>> Coolant system
About the machine:
Offered is a universal milling machine Deckel FP1 repowered by FPS in like-new condition. Included in the accessories are the hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You have the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 2006 Generalüberholt
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition
Technical Data:
>> Machine No. 53819/08
>> Fixed Angle Table
>> Spindle Speed: 40 - 2000 rpm
>> Feed on 2 Axes
>> Motor Power: 1 / 1.5 kW
>> Travels X/Y/Z: 300/150/340 mm
>> Vertical and Horizontal Quill - ISO 40 taper
>> Spindle Brake
>> Drawbar System S20x2
>> Weight approx. 700 kg
Accessories and Equipment:
Iodevb Ud Ujpfx Afwoa
>> 3-axis digital readout by RSF Elektronik
>> Coolant device
>> Machine leveling feet
About the Machine:
Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 Aktiv
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION
Technical Data:
>> Year of manufacture: 1984 Machine No. 2102-2601
>> Swivel-tilting rotary table
>> Spindle speed: 40 - 2000 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel X/Y/Z: 300/160/340 mm
>> Vertical milling head can be shifted 100 mm on spindle carrier
>> Vertical quill and horizontal quill – ISO 40 (SK40)
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain TNC113
>> Coolant system
>> Operating manual, spare parts diagram
About the machine:
Iedju Racrepfx Afwoa
For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 Aktiv
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed
Very Good CONDITION
Technical Data:
>> Year of manufacture: 1992 Machine number: 2102-6289
>> Rigid angle table (newly planed)
>> Spindle speed: 40 - 2000 rpm
Isdpfju T D Nrex Afwoa
>> Infinitely variable feed on 3 axes
>> Rapid traverse on 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel distances X/Y/Z: 300/160/340 mm
>> Vertical milling head adjustable by 100mm on spindle carrier
>> Vertical quill and horizontal quill - SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain TNC113
>> Coolant system
>> Operating manual, spare parts list
About the machine:
Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 Aktiv 2008 Retrofit FA Huttelmaier
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736
Universal Milling Machine Deckel FP1
with 3-axis active digital readout TNC 111 Heidenhain
2008 retrofit carried out by FA Huttelmaier
In very good condition
Technical Data:
>> Year of manufacture: 1985 Machine No.: 2102-2891
>> Rigid angle table
>> Spindle speed: 40 – 2000 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel (X/Y/Z): 300/160/340 mm
Isdpfxou Nvwvo Afwja
>> Vertical milling head transversely adjustable on spindle carrier by 100 mm
>> Vertical and horizontal quill - SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain TNC111
>> Coolant system
>> Operating manual, spare parts plan
About the Machine:
Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 repowered by FPS
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition!
Technical Data:
>> Machine No. 55249/08, Year 2010
>> Fixed Angle Table
>> Spindle Speed: 40 - 2000 rpm
Isdpexu Hbhofx Afwsa
>> Feed on 2 Axes
>> Drive Power: 1 / 1.5 kW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical Quill SK40 and Horizontal Quill SK40
>> Drawbar System S20x2
>> Weight approx. 700 kg
Accessories and Equipment:
>> 3-axis Digital Readout Heidenhain ND 780
>> Hydraulic Vice
>> Collets
>> Tool Holders
>> Cutters
>> Operating Manual
>> Coolant System
About the Machine:
Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP2 Aktiv
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed - TOP Condition
Technical Data:
>> Year of manufacture: 1979 Serial No.: 2202-10777
>> Fixed angle table (newly planed)
>> Spindle speed: 25 – 2,500 rpm
>> Infinitely variable feed on 3 axes
>> Rapid traverse on 3 axes
>> Drive power: 2.2 kW
>> Spindle brake
>> Traversing paths X/Y/Z: 400/220/400 mm
>> Vertical milling head can be moved 150mm on the column
>> Vertical and horizontal quill - SK40 extendable
>> Drawbar system S20x2
>> Weight approx. 1,400 kg
Accessories and Equipment:
>> 3-axis TNC 113 active digital readout by Heidenhain
>> Coolant unit
>> Central lubrication
About the Machine:
Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw only limited use. The machine has minimal play in the handwheels, and all spindle movements operate smoothly. Even at maximum speed, the milling machine runs quietly. On this later FP2 model, feed is infinitely variable on all three axes; the machine also features rapid traverse for each axis. A key advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions for the machine to automatically move to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise operation.
Ijdpfx Asuc Ubwefwja
Take the opportunity to inspect and test this machine under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 Aktiv
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION
Technical data:
>> Year of manufacture: 1987 Machine No.: 2102-3536
>> Fixed angle table
>> Spindle speed: 40 - 2000 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel (X/Y/Z): 300/160/340 mm
>> Vertical milling head adjustable on spindle carrier by 100 mm
Iodpju R D I Sefx Afwja
>> Vertical quill and horizontal quill – SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Equipment and accessories:
>> 3-axis digital readout Heidenhain TNC113
>> Centralized electric lubrication
>> Machine lamp
>> Coolant system
>> Operating manual, spare parts list
About the machine:
Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP1 Aktiv
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition
Technical Data:
Iedpjxu E R Isfx Afwsa
>> Year of manufacture: approx. 1990, Machine no. 2102-5231
>> Fixed angle table
>> Spindle speed: 40 – 2000 rpm
>> Infinitely variable feed on 3 axes
>> Rapid traverse on 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel (X/Y/Z): 300/160/340 mm
>> Vertical milling head can be shifted 100 mm on the spindle head
>> Vertical and horizontal quill – SK40
>> Drawbar system M16
>> Weight: approx. 800 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain TNC113
>> Centralized electrical lubrication
>> Coolant system
>> Operating manual, spare parts diagram
About the Machine:
Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises.
The machine is available immediately.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių šlifavimo mašina
DeckelS11 speed
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Universal Tool Grinding Machine Michael Deckel S11 speed, Year of Manufacture 2002, Excellent Condition!!
Technical Data:
>> Year of Manufacture: 2002
>> Serial No.: 2197
Clamping Range:
>> Clamping surface of tool slide: 500 x 180 mm
>> Max. tool diameter between centers: 130 mm
>> Max. tool length between centers: 270 mm
>> T-slot on machine base: 12 mm
Movement Range:
>> Working travel:
Grinding stroke: 190 mm
Grinding stroke for helical grinding: 190 mm
Cross movement of tool slide: 100 mm
Vertical adjustment of grinding head: 325 mm
Longitudinal adjustment of grinding spindle: 5 mm
>> Coarse adjustment travel:
Tool carrier: 220 mm
Grinding head carrier: 800 mm
>> Swivel angles:
Grinding head carrier: 360°
Grinding head: 360°
Tool carrier: 360°
Grinding Spindle:
Three-phase drive motor: 1.1 kW at 2800 rpm
Spindle speeds, stepless: 2000 to 12000 rpm
Isdpjwrnf Eefx Afwea
Max. grinding wheel diameter: 125 mm
Max. cutting disc diameter: 200 mm
Dimensions:
Weight: 520 kg
Dimensions (D x W x H): 800 x 1100 x 1760 mm
Space requirements (including operator): 2.5 x 2.3 m
Accessories and Equipment:
>> See pictures
About the Machine:
A universal tool grinding machine of the Michael Deckel S11 speed model is being offered. This machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground incredibly quickly, economically, and flexibly, while maintaining the highest level of user comfort. The Deckel S11 speed is in very good condition. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių šlifavimo mašina
Michael DeckelS11
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Universal Tool Grinding Machine Michael Deckel S11 – Very Good Condition!
Technical Data:
>> Year of manufacture: 1992
>> Serial no.: 1651
Clamping Range:
>> Clamping table surface of the tool slide: 500 x 180mm
>> Max. tool diameter between centers: 130mm
>> Max. tool diameter with cantilever clamping in the universal dividing head: 620mm
>> Max. tool length between centers: 270mm
>> T-slot base width (machine stand): 12mm
>> T-slots (grinding head, tool slide, and accessories): 8mm
Movement Range:
>> Working travels
Grinding stroke: 190mm
Grinding stroke for helical grinding: 190mm
Cross movement of the tool slide: 100mm
Vertical adjustment of the grinding head: 325mm
Longitudinal adjustment of the grinding spindle: 5mm
>> Coarse adjustments
Tool holder: 220mm
Grinding head carrier: 800mm
Universal dividing head on tool slide: 330mm
>> Swivel angles
Grinding head carrier: 360 degrees
Grinding head: 360 degrees
Tool holder: 360 degrees
Grinding Spindle:
Iedpsm E T Ansfx Afwoa
Three-phase drive motor 1.1 kW at 2800 rpm
Spindle speeds, stepless: 2000 to 10000 rpm
Max. grinding wheel diameter: 125mm
Max. cut-off wheel diameter: 200mm
Dimensions:
Weight: 520 kg
Dimensions (depth x width x height): 800 x 1100 x 1760mm
Space requirement (including operation): 2.5 x 2.3 m
Equipment and accessories:
>> Opto-electronic measuring device with microscope and digital display
>> Radius grinding attachment SK40
>> Manual handwheel device for tool slide
>> Suction device
>> Machine lamp
About the machine:
Offered for sale is a universal tool grinding machine, brand Michael Deckel S11. The machine is suitable for precision grinding of high-accuracy components. The S11 enables fast, economical, and flexible grinding of single parts and small batches – all with the highest level of operating comfort. The Deckel S11 is in very good condition, mechanically and electrically tested. Take this opportunity to view and test the machine under power on site.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių šlifavimo mašina
Deckel MichaelS5
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Michael Deckel S5 tool grinding machine in very good condition
Technical data:
>> Year of manufacture: 03/1995
>> Maximum grinding wheel diameter: 100 mm
>> Spindle speed: 5,600 rpm
>> Power consumption: 1.5 kW
>> Weight: 450 kg
Accessories:
>> Swiveling indexing head SK40
>> Various SK40 tool holders
About the machine:
Offered here is a Michael Deckel S5 tool grinding machine. The machine is suitable for grinding high-precision components. The Deckel S5 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.
Iedspr U Etjpfx Afwja
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių šlifavimo mašina
DeckelS11
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal Tool Grinding Machine Michael Deckel S11 with accessories and tool cabinet in very good condition!!
Technical Data:
>> Year of manufacture: 1992
>> Serial no.: 1673
Clamping Range:
>> Clamping table area of the tool slide: 500 x 180 mm
>> Max. tool diameter between centers: 130 mm
>> Max. tool diameter with overhung mounting in the universal dividing head: 620 mm
>> Max. tool length between centers: 270 mm
>> T-slot width on machine base: 12 mm
>> T-slot width on grinding head, tool slide, and accessories: 8 mm
Range of Movement:
>> Working travels
Grinding stroke: 190 mm
Grinding stroke with helical grinding: 190 mm
Cross adjustment of tool slide: 100 mm
Vertical adjustment of grinding head: 325 mm
Longitudinal adjustment of grinding spindle: 5 mm
>> Coarse adjustment travels
Tool holder: 220 mm
Grinding head carrier: 800 mm
Universal dividing head on tool slide: 330 mm
>> Swivel angles
Grinding head carrier: 360°
Grinding head: 360°
Tool holder: 360°
Grinding Spindle:
Three-phase drive motor 1.1 kW at 2800 rpm
Spindle speeds, stepless: 2000 to 10000 rpm
Max. grinding wheel diameter: 125 mm
Max. cutoff wheel diameter: 200 mm
Dimensions:
Isdpfx Afoxu E Nqowoa
Weight: 520 kg
Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm
Required space (including operation): 2.5 x 2.3 m
Accessories and equipment:
1 pc. tool cabinet with contents:
>> See pictures
About the machine:
Offered here is a universal tool grinding machine by Michael Deckel, model S11. The machine is suitable for grinding highly precise parts. With the S11, individual parts and small series can be ground surprisingly fast, efficiently, and flexibly, all while offering maximum operator comfort. The Deckel S11 is in very good condition and comes with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test the machine under power on site.
mažas skelbimas
Ubstadt-Weiher
1 232 km
Įrankių frezos
DeckelFP3
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with 3-Axis Digital Display RSF Elektronik Z-530!!
Technical Data:
>> Year of manufacture: approx. 1975, Machine No. 0681
>> Swiveling-tilting rotary table (completely overhauled)
>> Spindle speed: 40 - 2000 rpm
>> Feed and rapid traverse in 3 axes
>> Drive power: 3 kW
>> Travel X/Y/Z: 500/300/400 mm
>> Equipment: Vertical & horizontal spindle
Iodsxu E I Hjpfx Afwja
>> Vertical quill and horizontal quill extendable – SK-40
>> Drawbar system M16
>> Weight: approx. 1300 kg
Accessories and Features:
>> 3-axis digital readout RSF Elektronik Z-530
>> Coolant system
>> Central lubrication
About the Machine:
A Universal Milling Machine Deckel FP3 is being offered in good condition. All spindles move smoothly. Most of the bellows are almost new. The swiveling-tilting rotary table is as new. Oil change has been carried out. Mechanically and electrically tested. The digital display makes work easier and more precise. You are welcome to inspect and test the Deckel on site under power.
The machine is available immediately!!!
mažas skelbimas
Ubstadt-Weiher
1 232 km
ĮRANKIŲ ŠLIFAVIMO STAKLĖS
Michael DeckelS11
Skambinti
Sąlyga: labai geros būklės (naudotas), Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Very Good Condition!!
Technical Data:
>> Year of manufacture: 1986
>> Serial number: 759
Clamping Range:
>> Clamping surface of the tool slide: 500 x 180 mm
>> Max. tool diameter between centers: 130 mm
>> Max. tool diameter with overhung mounting in the universal dividing head: 620 mm
>> Max. tool length between centers: 270 mm
>> T-slots on machine base: 12 mm
>> T-slots on grinding head, tool slide, and accessories: 8 mm
Range of Movement:
>> Traverse paths
Grinding stroke: 190 mm
Grinding stroke for helical grinding: 190 mm
Cross travel of tool slide: 100 mm
Vertical adjustment of grinding head: 325 mm
Longitudinal adjustment of grinding spindle: 5 mm
>> Coarse adjustment paths
Tool holder: 220 mm
Grinding head carrier: 800 mm
Universal dividing head on tool slide: 330 mm
>> Swivel angles
Grinding head carrier: 360 degrees
Grinding head: 360 degrees
Tool holder: 360 degrees
Grinding Spindle:
Three-phase drive motor: 1.1 kW at 2800 rpm
Spindle speeds, stepless: 2000 to 12000 rpm
Max. grinding wheel diameter: 125 mm
Max. cut-off wheel diameter: 200 mm
Dimensions:
Weight: 520 kg
Dimensions (D x W x H): 800 x 1100 x 1760 mm
Space requirement (including operation): 2.5 x 2.3 m
Accessories and Equipment:
1 piece tool cabinet containing:
>> Universal dividing head SK40
>> Helical and clearance grinding attachment
>> Radius grinding attachment SK40
>> Tailstock
>> Swiveling support finger
>> Machine vise
>> SK40 tool holders
>> Measuring holder
>> Intermediate bearing
>> Setting gauge
>> Support finger for radius cutters
>> Tooth supports
>> Dividing head tip
>> Protective covers
>> 1 set of collets, as new, from 1 to 17.5 mm in 0.5 mm increments
>> Grinding wheel holders
>> Various grinding wheels
>> Dividing disks
>> Extraction unit with vacuum
>> Various holders and much more (as shown in the pictures)
About the Machine:
Isdpsqd N S Djfx Afwoa
For sale is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground remarkably quickly, economically, and flexibly, all while maintaining the highest level of operating comfort. The Deckel S11 is in very good condition and comes equipped with a wide range of accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.
Palengviname jums paiešką: "deckel so"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Deckel So (679)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo


















































































































































































































































