Deckel Maho Dmu 200 P pirkti naudotą (330)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Veleno apsukų diapazonas: 9000 aps./min, eiga X/Y/Z: 500 mm / 400 mm / 400 mm, padavimo greitis: 10000 mm/min, greitas poslinkis: 12 m/min. Stalo matmenys X/Y: 700 mm / 500 mm, didžiausia stalo apkrova: 200 kg, T-formos griovelių skaičius: 7, atstumas tarp griovelių: 63 mm. Valdymo sistema: Heidenhain, įrankių keitiklis: 16 pozicijų, matmenys X/Y/Z: 4000 mm / 2200 mm / 2450 mm, svoris: apie 3500 kg. Dcedpfjw Tc Nysx Ab Sjb

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, veikimo valandos: 37 369 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1112.000594 3, X ašies eiga: 630 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 560 mm, stalo plotis: 1 000 mm, stalo ilgis: 600 mm, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Main Spindle Tool holder: SK 40 Dcedpfxowx Ekxj Ab Ssb Work Table Clamping surface: 1,000 × 600 mm T-slot spacing: 63 mm Number of T-slots / size: 9 / 14 H7 Tool Magazine Magazine positions (2 × 12): 24 units Tool diameter magazine 1: 130 mm Tool diameter magazine 2: 80 mm Tool length from spindle nose: 315 mm Tool weight for automatic tool change: 8 kg Total tool weight in magazine: 100 kg Main Drive Speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain TNC 426/430 Electrics Machine connection: 3N/PE–50/60 Hz, 400/230 V Basic equipment current draw: 38 A Basic equipment power consumption: 26 kVA Basic equipment fuse: 50 A Rated power: 35 kVA Transport Transport weight machine with tool changer: approx. 6,700 kg Transport dimensions machine (L x W x H): approx. 3.50 x 2.70 x 2.21 m EQUIPMENT Tool changer included

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 8 725 h, Funkcionalumas: visiškai funkcionalus, Deckel Maho DMU 50 EVO with ITNC 530 About the machine: Only 2,684 spindle hours! Like-new condition! All hoses (pneumatics, coolant, cooling) have been replaced. The machine has been thoroughly cleaned. It has been checked and measured, and a geometry protocol was created. Geometry is excellent. Top features! - Control: Heidenhain ITNC 530 - Travel (X, Y, Z axis): 500/420/380 mm - Rapid traverse: 50 m/min - Spindle speed: 20-18,000 rpm - Tool holder: SK40 DIN 69871 - Tool magazine with 32 positions - Machine weight approx. 6,500 kg - Chip conveyor - Through-spindle coolant 40 bar with band filter (new rotary union) - Rinsing gun - Coolant/air blast switching (M25) - Heidenhain TS 640 probe - NEW Renishaw tool probe (automatic swing-out) - Kinematic Qickset - Network connectivity - Automation interface possible Inspection or test under power at our premises is, of course, possible. We would be happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co.KG, are a company specialized in: - Service Djdpfx Ajxf Ud Seb Secb - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We guide you! From purchase, through transport and installation, to commissioning and subsequent maintenance or repair work—you can rely on us.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11025512744, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 4 500 aps./min, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Heidenhain TNC 310 Tool holder: SK 40 Spindle speeds: 20–4,500 rpm MACHINE DETAILS Machine weight: approx. 3,000 kg Dodpfjwr D Ehsx Ab Socb Space requirements: approx. 2.15 x 2.00 x 2.50 m EQUIPMENT - Swiveling rotary table - Documentation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control - Excellent Condition Dedpfx Asvyr Tdsb Sjcb Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Type: iTNC 530 >> Travels: X500/Y450/Z400 mm >> C axis: 360 degrees >> B axis: 0 degrees to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y-/Z- axis: 50 m/min X- axis: 80 m/min (linear drive) B- axis: 40 rpm C- axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping area: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 meters, Width: 2.4 meters, Height: 2.6 meters Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> IKZ (internal coolant supply) 40 bar >> Coolant filtration unit (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Preparation for robotic loading >> 3D probe: Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following work has been carried out: >> Overhauled main spindle >> Complete maintenance: All coolant and pneumatic hoses replaced, new filters, fluids and belts renewed. Scrapers, etc., and complete cleaning performed. >> Geometric inspection (acceptance protocol) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection protocol has been prepared. Take the opportunity to view and test the machine under power on site.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 500mm/400mm/400mm, spindle speed: 9000 rpm, spindle power: 9kW/13kW, tool holder: SK40, feed rate X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot pitch: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control system: MillPlus. Documentation available. On-site inspection possible. Dcodpfx Aeu T Rilsb Ssb

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 570035, X ašies eiga: 710 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, bendras aukštis: 3 300 mm, bendras ilgis: 4 600 mm, bendras plotis: 5 500 mm, stalo plotis: 500 mm, stalo ilgis: 700 mm, bendras svoris: 6 000 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 12 000 aps./min, ašies variklio galia: 25 000 W, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, 5-axis machining center, Manufacturer: DECKEL MAHO, Model: DMU 70 V, Year of manufacture: 1996, Serial No.: 570035, Travel paths (X/Y/Z): 710/520/520 mm, Control: HEIDENHAIN, max. spindle speed: 12,000 rpm, 60-tool automatic tool changer, compact filtration unit INTERLIT SUK200/900, year of manufacture: 1997, capacity: 900 l, filter area: 0.2 m³, chip conveyor, internal coolant supply Dcsdpsrkz A Iefx Ab Ssb Note: One tool changer is defective.

Sąlyga: naudotas, x-travel 500 mm y-travel 400 mm Dcedpfov Td Eljx Ab Seb z-travel 400 mm

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 52 964 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, valdiklio modelis: Heidenhain MillPlus, veleno greitis (maks.): 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 800 mm Dedpfx Aewnbqgjb Sjcb Y-axis travel: 650 mm Z-axis travel: 550 mm Control system: Heidenhain MillPlus Table Table length: 1,100 mm Table width: 650 mm Max. table load: 800 kg Feed Rate X-axis: 20,000 mm/min Y-axis: 20,000 mm/min Z-axis: 20,000 mm/min Spindle Spindle taper: 40 ISO / BT / MT Spindle power: 15 kW Max. speed: 12,000 rpm Tool Changer Tool positions: 24 Number of controlled axes: 3 MACHINE DETAILS Length: 3,400 mm Width: 2,400 mm Height: 2,800 mm Weight: 8,700 kg EQUIPMENT - 4th axis - Chip conveyor - Coolant system - Control cabinet

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 24 128 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 530 mm, Y ašies eiga: 380 mm, Z ašies eigos atstumas: 380 mm, sukimosi greitis (maks.): 8 000 aps./min, įrankių magazino lizdų skaičius: 24, B ašies pasukimo kampas (maks.): 180 °, C ašies pasukimo kampas (maks.): 360 °, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Heidenhain Millplus Spindle speed: 8,000 rpm Power: 15 kW Torque: 130 Nm Tool holder: SK40 NC rotary-tilt table B-axis: 180°, 16 rpm C-axis: 360°, 18 rpm Clamping surface: Ø500 × 380 mm Maximum table load: 200 kg T-slot spacing / size: 63 / 14 H7 mm Centering bore: Ø30 H7 mm Max. torque (rotary axis): 1,000 Nm Max. table rotation speed (rotary axis): 18 rpm Max. tilting torque: 1,100 Nm Tilting speed: 16 rpm Traverse and Position Measurement Rapid traverse (X/Y/Z axes): 30 m/min Measuring system: Direct in X/Y/Z (glass scales) Tool magazine Tool magazine capacity: 24 stations Max. tool length from spindle nose: 280 mm Dcsdpev Tp Dmefx Ab Sjb Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 80 kg Required compressed air: approx. 5.5 – 8.0 bar Compressed air consumption: approx. 7 m³/h Chip management Chip management: Chip tray MACHINE DETAILS Power-on hours: 58,886 h Spindle hours: 24,128 h Weight: 4,400 kg Installation dimensions: 5.2 x 4.0 x 3.1 m (without peripherals) Transport dimensions: 2.45 x 1.76 x 3.38 m, 3.5 t The zero-point plate on the worktable is not included in the scope of delivery.

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 64 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1505709006, X ašies eiga: 750 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 520 mm, sukimosi greitis (maks.): 42 000 aps./min, įrankių magazino lizdų skaičius: 60, B ašies pasukimo kampas (maks.): 180 °, Machine in good condition, measurement protocol available Dcjdpfxjwrz Nwe Ab Sob TECHNICAL DETAILS Travel X: 750 mm Travel Y: 600 mm Travel Z: 520 mm Table Clamping surface: Ø 700 × 500 mm Central/max table load: 350 kg NC rotary swivel table: 700 × 500 mm B-axis: 180° C-axis: 360° Spindle Spindle speed: 42,000 rpm Tool holder: HSK E50 Spindle chiller: available Control CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: available Prepared for 3D probe HEIDENHAIN TS 641: without probe BA: 4 Tool management Tool changer: 60 positions Speed Rapid traverse: 50 m/min MACHINE DETAILS Machine dimensions (L × W × H): 3,200 × 2,650 × 2,800 mm Machine weight: 9 t Total power requirement: 50 kVA Power supply: 400 V Operating hours Power-on hours: 141,300 h Spindle hours: 64,500 h Control power-on hours: 146,100 h EQUIPMENT - 5-axis simultaneous HSC machining center - NC rotary swivel table with B and C axis - Chip conveyor installed - Electronic handwheel for manual operation - Laser for tool measurement - Prepared for 3D probe HEIDENHAIN TS 641 - Integrated oil mist extractor - Spindle cooling system available - No internal coolant supply (IKZ)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 240 mm, Z ašies eigos atstumas: 340 mm, valdiklių gamintojas: Heidenhain, C ašies pasukimo kampas (maks.): 360 °, TECHNINĖ INFORMACIJA Dcsdpfx Aew N Im Ajb Ssb Eigos ilgiai X ašis: 350 mm Y ašis: 240 mm Z ašis: 340 mm C ašis: 360° rankinis B ašis: +105° / -15° rankinis ĮRENGINIO INFORMACIJA Valdymas: Heidenhain

Sąlyga: naudotas, Gamybos metai: 2008, x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN Control: MillPlus iT Table clamping surface: Ø 500 x 380 mm B-axis: 0 - 161.955° Dedpewlvi Eofx Ab Secb C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Rapid traverse B-axis: 40 rpm Rapid traverse C-axis: 50 rpm Number of tool magazine stations: 30 Tool diameter with 2 free positions: 130 mm Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Internal coolant supply: 40 bar Total power demand: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, NEW ARRIVAL 1 pre-owned, very well-maintained 5-axis CNC machining center D E C K E L D M U 50, year 2001, with only 14,056 spindle hours! X 500 - Y 380 - Z 380 mm – NC rotary table 500 x 380 mm with 180° swivel axis Display increment 0.001 Spindle SK 40 / 15,000 rpm – 24-position tool changer HEIDENHAIN CNC 426 – electronic handwheel – zero-point clamping system – tool breakage control with laser length measurement – infrared probe preparation Coolant unit – machine feet – many tool holders, etc. The machine comes from a surgical production facility with regular maintenance! Complete spindle cooling system replaced in 2024. We would be pleased to demonstrate the machine under power in our showroom. Delivery time: immediate – subject to prior sale and errors. Price: ex stock, plus 19% VAT, unpacked, uninsured. Payment: as is customary for used machinery, in advance before collection, immediately upon receipt of invoice. -- Best regards Mathias Becker Induba GmbH 78628 Rottweil Dcedpeg Rhnnjfx Ab Sjb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 1 380 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 350 mm, veleno greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 30, B ašies pasukimo kampas (maks.): 108 °, C ašies pasukimo kampas (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool magazine capacity: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control unit: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on time: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary swivel table - Through-spindle coolant (prepared for 40 bar) - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement Dcedpfewu Evtox Ab Sob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, X ašies eiga: 1 600 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 1 000 mm, sukamosios stalo skersmuo: 1 500 mm, veleno greitis (min.): 18 000 aps./min, veleno greitis (maks.): 18 000 aps./min, Heidenhain iTNC 530 valdymas Įrankių keitimo sistema 60 pozicijų Dcjdow Ngk Hjpfx Ab Sob Automatinė galva 180/-7° bepakopė

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 27 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 710 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, veleno greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 32, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Number of machining axes: 5 Simultaneous CNC axes: 3 Table clamping surface: 700 mm Djdpfjwqgrhjx Ab Sjcb Workpiece weight capacity: 350 kg Tool holder: HSK A63 Drive power S1 100%: 15 kW Maximum spindle speed: 18,000 rpm Spindle type: vertical Maximum tool diameter: 40 mm Magazine type: chain magazine Number of tool positions: 32 MACHINE DETAILS Overall height: 2,760 mm Total weight: 6,000 kg Required installation length: 2,710 mm Required installation width: 2,750 mm Connected load: 32 kVA Spindle hours: 27,000 h Operating hours: 83,450 h EQUIPMENT - Coolant system - Fully enclosed work area - CE compliant

Sąlyga: naudotas, Deckel Maho DMU 70 eVolution Dodpfx Absw Rtd Ao Socb

Sąlyga: naudotas, Gamybos metai: 2002, x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Table clamping area: 1250 x 700 mm NC rotary table integrated, 700 mm diameter Spindle taper: SK 40 Spindle mount: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Control: HEIDENHAIN Control model: TNC 430 Feed rates x/y/z - stepless: 20 - 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 32 positions (2 x 16) Tool diameter: 80 / 130 mm Max. tool length: 315 mm Max. tool weight: 8 kg NC rotary table - max. speed: 15 rpm Table load: 600 / 500 kg Milling head - swiveling: + / - 12 / 90 ° Total power requirement: 60 kW Djdpfx Abjtqqmbj Secb Machine weight: approx. 9.6 t Machine dimensions (L x W x H): 4.53 x 2.60 x 2.50 m = 5-axis machining center, table clamping area 1250 x 700 mm with integrated NC rotary table (= 4th axis), programmable milling head (= 5th axis) Accessories: electronic hand-held control pendant, chip conveyor (auger conveyor), coolant system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Control system: Heidenhain TNC 310 Accessories included Working area: X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Main drive: Infinitely variable spindle speed programmable: 20 – 4,500 rpm Tool holder: SK 40 Worktable: B/C-axis drive: manual Dcedpop H S Uxsfx Ab Ssb Clamping surface: ø 700 x 500 mm T-slot spacing/size: 63/14H7 mm Rotary range: 360° Swivel range: +95° / -10° Dimensions: Length: 1800 mm (750 mm control unit) Depth: 1800 mm Machine weight: 2,600 kg

Sąlyga: paruoštas naudoti (naudotas), Vertical machining center, travels: X 630 mm, Y 560 mm, Z 560 mm, spindle taper SK 40, 20-position tool magazine, table size 1000x600 mm, CNC Heidenhain TNC426 Dcedpfx Aewf U Ndeb Sob

Sąlyga: naudotas, DECKEL MAHO Modell: DMU 50 M Vertikal-Ausführung Dsdpfsrh Epysx Ab Sscb Guter Zustand

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 17 362 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 15035703814, X ašies eiga: 750 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, valdiklio modelis: Heidenhain 426, veleno greitis (maks.): 18 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Dcedsv R Ez Nspfx Ab Sob C-axis: available B-axis: available Controls Control unit: Heidenhain 426 Handwheel: Heidenhain HR410 Table Table size: 700 x 500 mm Max. table load: 350 kg Spindle Speed range: 20 – 18,000 rpm Tool holder: SK40 Tool capacity: 32 tools Feed & Capacity Rapid traverse: 20,000 mm/min MACHINE DETAILS Connected load: 50 kVA On-time: 75,856 h Program run time: 17,363 h EQUIPMENT - Rotating B and C axes - Coolant tank with pump - Various tools

Sąlyga: geras (naudotas), Gamybos metai: 2001, MACHINE SPECIFICATIONS Control system: HEIDENHAIN Machining area: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm Main drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Dedpfsxq Hb Tjx Ab Sjcb Torque (40/100% duty cycle): 130/87 Nm Feed rates: Working feed rates (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (res. 0.001º) B-axis travel: 180º (res. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Spindle taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Coolant through spindle Automatic tool changer: ATC-32 - Max tool weight / Max tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity coolant system: Interlit SUK-200-900 Equipped with interface for Renishaw probe: probe included