Apdirbimo centras - vertikalus

Deckel Maho DMU 125 T UNTER STROHM

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Podpfx Aov T Np Aefwjgw Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2002, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 220 mm, stalo plotis: 515 mm, stalo ilgis: 640 mm, Wire EDM machine Chmer EDM Model: CD 305G X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 220 mm Table size: 515 x 640 mm Year of manufacture: 2002 Pgodpjqgcimofx Afwow Operating hours: 16,333 Including documentation and parameters Dimensions: 245 x 200 x 203 cm (LxWxH)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08.2000 in Germany. This machining center operates along three axes, with maximum X / Y / Z travel of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN cable connection to an external computer. Additionally, the machining center is outfitted with a chip conveyor, hydraulic clamping, a 87-tool magazine, a swiveling probe, and a control cabinet air conditioning unit. The spindle operates at a maximum speed of 15,000 rpm. Spindle hours: approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of the Hermle C 800 V CNC Machining Center – X / Y / Z axis travel: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW Pgedpfx Afeiva Dkewow – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7000 kg Equipment of the Hermle C800V CNC Machining Center – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Coolant supply through the tool: 40 bar – Control cabinet air conditioning – Swiveling probe – Chip conveyor Additionally available for separate purchase, also visible in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 touch probe (as new)

Sąlyga: geras (naudotas), Gamybos metai: 1990, CNC cylindrical grinding machine Manufacturer: TSCHUDIN Type: HTG 22 - 862, Year 1990 Equipped with MARPOSS E14 control system and E5 measurement-control system. Centre distance: 650 mm Centre height: 100 mm Grinding length: 620 mm Weight: approx. 4,500 kg. For further details, see: TECHNICAL DATA SHEET Pgjdpfx Afjid Aphewsw Includes numerous grinding wheels and holders. Complete machine documentation available. Machine in stock.

Gamybos metai: 2006, Sąlyga: naudotas, Cross Stacker Gaemmerler KL 540 with Attached Blocker VM 500 The cross stacker KL 540 operates with the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and fully operational Technical Data: Cycle time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo pusher (depending on product) Number of pages: 4 – 96 (heatset/gravure) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal pusher) B: 140 – 500 mm D max.: 560 mm Layer height: max. 200 mm Pedpfx Afjh Nrh Uswjgw Stack height: max. 300 mm Weight: approx. 1,500 kg Blocker Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and a blocking time of 2 sec. The cycle time per package will increase if the blocking time is extended and if the package height is reduced. The cycle time is also strongly influenced by the ejection speed of the cross stacker and, thus, by the product (surface, format). Formats: Width: 140 to 500 mm (5.5" to 19.7") Length: 105 to 330 mm (4.13" to 13") Stack height: 55 to 400 mm (2.16" to 15.7") Infeed height: 890 mm (35") Outfeed height: 890 mm (35") Connection power: 16A (2 kW, 380/480 volts, 3 phase, neutral) Air requirement: 1000 Nl/min, 6 bar; oil-free, dry air Weight: approx. 500 kg

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Pgjdpfxofz I Ehj Afwow Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: naudotas, Gamybos metai: 1997, Heidenhain 355 valdymas x eiga: 850 mm y eiga: 550 mm Pedpfx Aod N Smhsfwjgw z eiga: 450 mm Įrankio tvirtinimas: SK50 Mašinos svoris apie 5,5 t +++++ Atkreipkite dėmesį, kad staklės yra išardytos ir paruoštos pakrovimui. Dėl šios priežasties parodymas įjungtomis staklėmis ar vaizdo įrašo gamyba negalima. Be to, mūsų skelbime yra informatyviausios ir aukščiausios kokybės nuotraukos. Papildomų nuotraukų atsiuntimas, deja, neįmanomas. +++++

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, We offer you the following: Universal Machining Center Manufacturer: Deckel Maho Model: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Centering bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Pgjdpfxevx Tmco Afwow Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - ICS (internal coolant supply) Accessories: - Chip conveyor - Measuring probe Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information may be subject to change and error. Prior sale reserved!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Directly available from toolmaking facility Vertical Machining Centre Pjdpfx Afot I Di Aewogw Brand: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Tool holder: SK 40 Spindle speed: 1 – 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 positions Equipment/features: - Linear drive on X-axis - Bed flushing system - Spiral chip conveyor - Direct path measuring system - Drill breakage control via laser - Z-axis temperature compensation via sensor incl. active chiller unit - Through-spindle coolant supply (IKZ) - External air blast via 2 pipes - Coolant system 700 litres, paper band filtration unit with high-pressure system 40 bar - Visiport inspection window on operator door - Additional machine door on left side - Bader cooling unit on control cabinet - Prepared for connection to a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with sealing air 0.5 bar

Sąlyga: geras (naudotas), Tovaglieri parallel lathe Pjdpfx Afjkt U E Ijwsgw Used, from an educational environment. Excellent condition. Centre height: 180 mm. Distance between centres: 700 mm. Spindle bore: 45 mm. Included accessories. No. 4 units available, subject to prior sale.