Deckel Lk pirkti naudotą (686)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 Ljdpfxeu Nvwvj Af Hshk >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier Lhsdpfou T D Nrsx Af Hsk >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, plunksnos brūkšnys: 90 mm, Dear Sir or Madam, We are pleased to offer you a meticulously maintained milling machine: Deckel FP4M (K) aktiv, equipped with a rotary-swivel tilting table and 4-axis digital readout. Thanks to its comprehensive features, this model is a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately available for operation. We look forward to your inquiry! Availability: Immediately available Machine no.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-swivel tilting table Lhodpfx Afovvtlgo Hsk Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further equipment and accessories include: 4-axis digital readout Heidenhain, 3-axis active control, hydraulic tool clamping, rotary-swivel tilting table, coolant system, machine leveling pads, operating manual, and much more on request... Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - You are free to choose the colour scheme of your machine - Additional accessories such as tooling can be included in your order upon request - We can also install further accessories such as safety devices upon request - We are happy to arrange shipping and/or installation

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3L with Brand New 3-Axis Digital Readout K&C – Excellent Condition Ledevn N Hdopfx Af Hohk Technical Specifications: >> Year of manufacture: approx. 1975, Machine No. 0924 >> Fixed angle table (clamping surface 1000 mm x 440 mm) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed rate: 10 to 500 mm/min >> Rapid traverse: 1500 mm/min in all feed directions >> Drive power: 2.2 kW >> Travels X/Y/Z: 800/300/400 mm (Y-axis can be shifted by 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill extendable, SK40 taper >> Drawbar system S20x2 >> Weight approx. 1900 kg Accessories and Features: >> 3-axis digital readout K&C, newly installed with manufacturer warranty and user manual. Readout unit: Reference points, zero points setting, coordinate input, mm/inch conversion, absolute or incremental coordinates, circle functions, bolt-hole circles, radius milling functions, etc. >> Mechanical central lubrication >> Operating manual >> 160 mm hydraulic vice >> Walter rotary table 500 mm About the machine: Offered is a universal milling machine Deckel FP3L in excellent condition. The vertical head can be shifted by 200 mm to provide an even larger working area. A central pump provides lubrication for the various axes. A distinctive feature of this model is its design: it is a machine with an inclined bed. All movement is assigned to the working spindle—and therefore to the tool. This results in outstanding accuracy, as different workpiece weights have no influence on axis movement. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Būklė: naudotas, Gamybos metai: 2005, X eiga 880 mm Y eiga 630 mm Z eiga 630 mm Valdymas iTNC 530 Heidenhain Pagrindinio veleno sūkių diapazonas maks. 18.000 min⁻¹ Pagrindinio veleno pavara 28 / 19 kW Maks. sukimo momentas 121 / 82 Nm Įrankio tvirtinimas HSK-A 63 B ašis pasukama: +30° / -120° Stalo tvirtinimo paviršiaus skersmuo Ø 700 / 1.250 x 700 mm Maks. stalo apkrova 650 kg C ašis pasukama: 360° Maks. ruošinio skersmuo 850 mm Maks. ruošinio aukštis 550 mm Įrankių vietų skaičius 32 poz. Įrankio tvirtinimas HSK-A 63 Maks. įrankio skersmuo 80 mm Maks. įrankio skersmuo su laisva kaimynine vieta 160 mm Ledpfovn Ur Eox Af Hehk Maks. įrankio svoris 8,0 kg Keitimo laikas nuo drožlės iki drožlės 10 sek. Padavimo greitis maks. 30.000 mm/min Greitas judėjimas 30 m/min Pagreitėjimas 5 m/s² Bendras energijos poreikis 48 kVA Staklių svoris apie 14,0 t Užimama vieta apie 6,5 x 5,0 x 2,9 m 5 ašių CNC universalus apdirbimo centras DECKEL MAHO - DMU 80 monoBLOCK - NC sukamasis stalas (C ašis) integruotas į fiksuotą stalą - Pakreipiama frezavimo galvutė (B ašis) - Tik 6 100 veleno valandų

Būklė: labai geros būklės (naudotas), Jaw width: 160 mm Jaw height: 50 mm Clamping width: 310 mm Lodod Hyfwjpfx Af Hehk Overall height: 170 mm

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 39 000 h, X ašies eiga: 500 mm, Y ašies eiga: 420 mm, Z ašies eigos atstumas: 380 mm, bendras aukštis: 5 600 mm, bendras ilgis: 9 000 mm, bendras svoris: 6 000 kg, valdiklio modelis: Heidenhain Mill Plus IT, For sale is a 5-axis machining center from the brand DMU, model 50 eVolution. Noteworthy is the GMN high-frequency spindle HCS 30,000 / 15 and the tool magazine with 92 positions. The machine is in good condition and fully operational. Technical data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx. 500 mm diameter Travel distances: X-axis: 500 mm Ljdpjtyit Esfx Af Hehk Y-axis: 420 mm Z-axis: 380 mm A-axis: 0–180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool magazine: 92 positions NO chip conveyor Space requirement as per drawing: 9,000 × 5,600 mm Transport dimensions: 2,800 × 3,700 × 2,800 mm Weight: 6,000 kg Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine buying / selling PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Fzho0bc Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good working condition, can be demonstrated under power by arrangement. Lhodpfxstp Nyfe Af Hsk

Būklė: naudotas, Gamybos metai: 2006, X eiga 800 mm Y eiga 800 mm Z eiga 800 mm Valdymas iTNC 530 Heidenhain Maks. sukimų greitis 18 000 aps./min Pagrindinis veleno pavara 28 / 19 kW Maks. sukimo momentas 121 / 82 Nm Įrankio laikiklis HSK A63 Pakreipiamas B: 0 - 190° Pakreipimo laikas 1,2 s Stalo skersmuo 900 x 700 mm Maks. stalo apkrova 1 400 kg Sukinėjimas C: 360° Įrankių pozicijų skaičius 60 vnt. Įrankio laikiklis HSK A63 Įrankio keitimo (span-span) laikas apie 5,0 sek. Greitasis judėjimas (X / Y / Z) 60 m/min Greitasis B: 30 m/min Greitasis C: 30 m/min Maks. padavimo greitis 60 000 mm/min Lodpfxjtqmmze Af Hehk Bendras energijos poreikis 64 kVA Staklių svoris apie 14,0 t Užimamas plotas apie 6,0 x 6,5 x 3,2 m 5 ašių CNC apdirbimo centras universalus DECKEL MAHO - DMU 80 P duoBLOCK - 5 ašių sinchroninis apdirbimas - Pakreipiamoji frezavimo galvutė - Apvalus stalas

Gamybos metai: 1974, būklė: beveik kaip naujas (naudotas), As-new Deckel FP1 tool milling machine, overhauled by FPS, equipped with 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Includes spindle brake and accessories: steady rest and various collets. The machine is in very good, ready-to-operate condition. Can be demonstrated under power by appointment. Lodpfx Aoq A Icqof Hohk

Gamybos metai: 2006, veikimo valandos: 109 000 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Horizontal machining center with 6-pallet station Ljdpfx Asmfrgnof Hjhk Machine has only been used for aluminum – new spindle installed in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001° Spindle speed: max. 18,000 rpm Control: SIEMENS 840D Shopmill Clamping surface: 500 x 500 mm Table load capacity: max. 800 kg Workpiece diameter: max. 800 mm Workpiece height: max. 900 mm Tool holder: HSK 63 Tool changer: 180 positions Spindle power: max. 30 kW Torque: 5,000 Nm Holding torque: 5,000 Nm Rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - Chip conveyor - 6-pallet station - Automatic tool measurement 3D wireless probe M+H - Coolant system with paper band filter - ICS system with band filter, 40 bar 30 tool pockets in the magazine are defective.

Gamybos metai: 1968, būklė: naudotas, Deckel milling machine FP1 with 3-axis digital readout 380V Machine no. 37729 120-1900 rpm Travel path X-axis: 300 mm Travel path Y-axis: 150 mm Travel path Z-axis: 340 mm Tool holder: MK 4 with draw thread S 20 x 2 Milling head type: Vertical milling head Table type: Fixed table Lsdpfx Afspmrpxs Hshk Clamping surface: 600 x 210 mm T-slot size: 12 mm Feed X-axis: 290 mm Feed Y-axis: 150 mm Feed Z-axis: 330 mm Weight: 700 kg Deckel milling machine FP1 ID: M100000409

Gamybos metai: 1982, būklė: visiškai atnaujintas (naudotas), Universal tool milling machine Brand: DECKEL Ledpepn Rgvjfx Af Hehk Model: FP 3 Aktiv Year of manufacture: 1982 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M 16 - Central lubrication, manual operation - Coolant system - Operating manual Used, sold as seen The machine is technically in accordance with the standards as of the year of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. Lhjdpfx Afspy Elde Hsk - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 86-5751 with warranty Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating instructions Including installation of an ON/OFF switch with undervoltage release to provide restart protection, e.g. in case of power failure or mains plug removal including production of a mounting adapter plate Used, as seen Lhsdpsqctnijfx Af Hok The machine is technically in accordance with the state of the art at the time of manufacture.

Gamybos metai: 1980, būklė: labai geros būklės (naudotas), „Deckel FP1“ frezavimo staklės, puikios būklės. Specifikacijos: – X ašis: 300 mm – Y ašis: 160 mm – Z ašis: 340 mm – tvirtinimo įrankio kotas: ISO 40 – greitis: 40–2000 aps./min. Lhsdpskuynuefx Af Hok – matmenys: 1200 x 1100 x 1800 mm – svoris: apie 800 kg Priedai: – „Heidenhain TNC 113“ skaitmeninis valdiklis, valdomas 3 ašimis – besisukantis/pakreipiamas stalas – kintamas padavimas X ir Z ašyse – aušinimo sistema

Gamybos metai: 1996, veikimo valandos: 91 897 h, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 288, TECHNICAL DETAILS X travel: 600 mm y travel: 560 mm z travel: 560 mm Control system: Siemens Lsdpelruxfefx Af Hshk MACHINE DETAILS Connection voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA Total power requirement: 12 kW Machine weight: approx. 10 t EQUIPMENT - 2 machine pallets - 1 measuring probe

Gamybos metai: 2006, veikimo valandos: 44 825 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1167000036, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 800 mm Travel range Z-axis: 800 mm B-axis: 360º B-axis increment: 0.001º Spindle speed: max. 10,000 rpm Spindle drive power: 30/20 kW (40%/100% duty cycle) CNC control: SIEMENS 840D Powerline ShopMill Classic Number of pallets: 2 Pallet dimensions: 500 x 500 mm Workpiece diameter: 800 mm Workpiece height: max. 1,350 mm Tool holder: SK-40 Number of tools in magazine: 45 MACHINE DETAILS Power-on hours: 64,431 h Spindle runtime: 44,825 h Total power consumption: 60 kVA Connection voltage: 400 V / 50 Hz Connection current: 100 A Coolant supply: 40 bar Tank capacity: 980 l Lhedpjlu Ex Rsfx Af Hok EQUIPMENT - Chip conveyor - Rotating inspection windows - Operating mode 4 - High-pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Būklė: paruoštas naudoti (naudotas), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control unit, serial number as shown in photo, used, normal signs of wear, 100% functional, scope of delivery as per photos. Lhjdsi D Upgepfx Af Hok

Būklė: geras (naudotas), Various Deckel FP3 milling machines are available for sale, all of which are in good condition. A notable feature of this machine is the mounted table, which can be tilted, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital readout: 3-axis digital display Lhedpeiz T Exsfx Af Hsk Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feed rates & rapid traverse: on all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices subject to VAT Viewings possible by appointment. Contact us, our team looks forward to assisting you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Būklė: naudotas, mašinos/transporto priemonės numeris: 2414-0075 bzw. 2314-0703, Table clamping surface: 520 x 1000 mm 6 T-slots: 16 mm Slot spacing: 90 mm Clamping plate can be swiveled horizontally to the right and left by: 45° each Tiltable towards/away from the machine by: 15° each Swivels to the right and left by: 15° each Permissible load, movable: approx. 1000 kg Lhodeb Hmbpepfx Af Hek Permissible load, fixed table: approx. 1500 kg Weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Būklė: naudotas, Support bearing Lhodpsctd Rhsfx Af Hsk Manufacturer: Deckel Rail width (inside): 92 mm Rail width (outside): 130 mm

Būklė: paruoštas naudoti (naudotas), Deckel SOE Engraving Cutter Grinding Machine Maximum collet bore: 17.5 mm Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse displacement: 100 mm Fine adjustment: 15 mm Swiveling range of indexing head carrier: 90° Coarse adjustment of indexing slide: 40 mm Fine adjustment of indexing slide: 12 mm Height from tube guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Sale subject to prior sale. If you have any questions, please feel free to contact us by phone. The telephone number can be found at the bottom of the item page in the legal notice / seller's information section. Visit our shop and check out our other offers as well. The listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The setup and electrical connection of the machine/equipment must be carried out or checked by a properly trained professional. Lhsdpfov T T Ivjx Af Hjk Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Shipping is only available to businesses - for private consumers, collection is the only option.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Universalioji įrankinė frezavimo staklė Lhodpfjx A Eddjx Af Hek Gamintojas: DECKEL Modelis: FP 2 Aktiv Pagaminimo metai: 1987 – renovuota, perdažyta su nauja staklių elektros instaliacija RAL7035 šviesiai pilka / RAL7012 bazalto pilka RAL5008 pilkai mėlyna Staklių Nr.: 2202-11579 Frezos galvos tipas: 2271 Frezos galvos numeris: 300-3606 su garantija geometrinis priėmimas su bandymų protokolu Priedai: - 3 ašių aktyvusis skaitmeninis ekranas HEIDENHAIN TNC 113 - Fiksuotas stalas 660 x 380 mm (T formos griovelis: 12 mm) - Vertikali frezavimo galva SK 40 su ištraukimo sriegiu S 20 x 2 - Rankinis centrinis tepimas - Aušinimo skysčio įranga - Eksploatacijos instrukcija - naudota, kaip matyti -

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we request your complete identification, including a correct telephone number and email address, in order to provide a quotation. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel paths: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse, X/Z axis: 1200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Swivel vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear. Lhedpoxyc Tkofx Af Hek 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axis The machine was partially overhauled by a specialist company several years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray unit Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: Good to very good, from training workshop Available from March 2026