Dažai Stendu pirkti naudotą (1 087)

Būklė: naudotas, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-Hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The system comes from an industrial environment and was fully operational until decommissioning. All servicing and maintenance were professionally carried out. Comprehensive technical documentation (operating, assembly, and circuit manuals) is included. The test stand is suitable for tensile/compression tests, torsion tests, as well as combined loading of components and assemblies, e.g. for fatigue, durability, and functional tests. Main Technical Data – Test Stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Maximum torque (torsion): ± 4,000 Nm - Maximum linear actuator stroke: ± 75 mm - Maximum rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test Stand Dimensions: - Overall height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Maximum clamping fixture weight: 250 kg Hydraulic Power Unit (included): - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank volume: approx. 1,500 liters Power Unit Dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical Data: Control Cabinet / Test Stand: - 400 V / 50 Hz - Connection: CEE 5-pin - Fuse: 16 A Hydraulic Power Unit: - 400 V / 50 Hz three-phase - Fixed connection - Fuse: approx. 160 A Scope of Delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit Cgsdpfx Afox H Rtnj Aet - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is mechanically rated up to 150 kN. The value 125 kN refers to the typical operating configuration. Test stand weight: approx. 4.7 t Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Būklė: naudotas, SincoTec Cgedpfx Afox H Ndle Aet Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Bench – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test bench from an industrial facility. This system is ideal for dynamic and static testing of components and assemblies, e.g., in automotive, mechanical engineering, or research applications. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Operation via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Bench: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Overall height of test bench: approx. 3.30 m - Hydraulic power unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm - Fully functional prior to dismantling Power supply / Electrical data (from nameplates): - Single units / motors - 230 V / 50 Hz - Leakage oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: “The table shown in the pictures is not included in the sale.” Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Technical Data Manufacturer: ZEISS / Stiefelmayer Model: SMM C Cgedpfjiwurcsx Af Aet Year of manufacture: 2001 Measuring range X = 12,000 mm Y = 2 x 1,400 mm Z = 2,100 mm Measurement uncertainty U3 = (50 + L/40) µm

Gamybos metai: 2025, būklė: naujas, GeoBoost-7000 Kombinierter Prüfstand für die Kalibrierung der Turbolader-Geometrie und Leistungsüberprüfung. Prüfstand zur statischen und dynamischen Kalibrierung sowie zum Testen von Turboladern. Der Prüfstand verfügt über eine kombinierte Zweipositionen-Ausführung, die eine Testung des Turboladers in zwei Modi ermöglicht: - Schnelle statische Kalibrierung der Turbolader-Geometrie - Vollständige dynamische Diagnostik bei verschiedenen Betriebszuständen Der GeoBoost-7000 ermöglicht die professionelle Prüfung des Turboladerbetriebs bei Reparatur, Tuning oder Modernisierung. Die zwei Arbeitsbereiche der Maschine – je nach Prüfverfahren – erlauben eine umfassende Diagnose. HIGHLIGHTS • Simuliert realistische Betriebsbedingungen für präzise Turbolader-Diagnose und -Abstimmung. • Flexibel und vielseitig einsetzbar für unterschiedlichste Turbolader-Modelle. • Alle Turboladertypen können mit dem beiliegenden Zubehör aufgenommen werden. • Öl-Leckprüfung mit beheiztem Öl und Druckluft. • Test des N75-Turbolader-Steuerventils. HAUPTMERKMALE - Möglichkeit zur Einstellung der Extremposition der Schaufeln des Luftstromregelsystems. - Anpassung der Gestängelänge zur Kalibrierung des Auslösedrehmoments des Luftstromregelsystems. - Realitätsnahe Turbolader-Prüfung. - Geometrieabstimmung in Echtzeit. - Leistungsprüfung der Aktuatoren: Vakuum-, Pneumatik- und Elektromotorische Ausführung. - Diagnose von Servoantrieben elektrischer Aktuatoren (optional). - Nachmontageprüfung des Turboladers auf Ölundichtigkeit. - Hochleistungs-Vakuumpumpe zur Erzeugung des erforderlichen Vakuums und Luftstroms. Cjdovtn Hmepfx Af Aegt - Prüfung der Turbine nach Hersteller-Prüfplan. - Berechnung der Turbolader-Performance. - Darstellung des Ladedrucks am Verdichterein- und -ausgang im Verhältnis zum Volumenstrom. - Erstellung der zugehörigen Charakteristik-Kurven. - Generierung und Druck von Prüfberichten. TECHNISCHE DATEN Maximale Rotor­drehzahl: 99.000 U/min Maximaler Verdichter-Luftdurchsatz: 110 m³/min Maximaler Verdichterdruck: 900 mbar Maximal erzeugtes Vakuum der Vakuumpumpe: -800 mbar Stromversorgung: 380 V, 3 Ph, 50 Hz Leistungsaufnahme: 6 kW Abmessungen: 1700 x 900 x 1500 mm Gewicht: 400 kg

Būklė: naujas, Gamybos metai: 2025, Punctual delivery, reliable equipment! Are you looking for quality and expert service for your sheet metal bending machine? Then we are the right partner by your side. Folding Machine ZGR-2000T/0.8 incl. Transport Wheels - Maximum working length of folding machine: 2140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.2 mm, copper sheet: 1.25 mm - Maximum bending angle: 145 degrees - Cutting with the rotary shear across the entire working width - Bending beam thickness: 15 mm - Cutting with the rotary shear across the entire working width - Upper beam can be raised in three positions - Upper beam stroke: 80 mm - Degree scale - Weight of folding machine: approx. 180 kg - Rotary shear for 0.8 mm sheet: additional €350 - Manual seam closer: €75 Delivery costs: €180 Price: €1350 Delivery time: weekly Cash payment on delivery We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community delivery or plus 19% VAT if applicable. Cedpscxu Uxjfx Af Aogt

Būklė: naujas, Gamybos metai: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy maintenance, long filter service life - Universally applicable, variable accessories - High flexibility Cjdobpg E Eopfx Af Ajgt - Mobile construction - Extraction technology with front sheet system Technical Data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Air volume: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter: 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Būklė: naujas, Gamybos metai: 2025, Paint mist extraction unit AL-KO Colour Jet 1 Paint mist extraction unit, ready for operation, 1 sqm filter area with pre-filter and fine filter, connection diameter 300 mm, 1.5 kW ex-rated motor (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and throttle valve. • Compact, space-saving sheet steel construction • Chassis with wheels • Indirect extraction near the floor • Completely pre-assembled • With connection cable and phase reverser • Adjustable side panels Cjdpfebumr Sjx Af Aogt • Optimized spray mist capture thanks to patented front panel hood • Long filter service life • High-performance fans with low noise level • Filter wall with special mats • Exhaust nozzle with integrated throttle valve Motor power: 1.5 kW Speed: 1400 rpm Nominal airflow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (Width 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, WIWA High-Pressure Pump 235.42R / 38042, Year 2000 With high delivery rate, ideal as a feed pump for airless spray units (suitable for medium- and low-viscosity coating materials) Material handling in stainless steel (suitable for water-based coatings) Transmission ratio: 42:1 Maximum air inlet pressure: 8 bar Delivery per double stroke: 235 cm³ Maximum flow rate: 38 l/min Maximum permissible operating pressure: 335 bar Piston diameter of air motor: 230 mm Piston stroke of air motor: 120 mm The units have seen very little use! Technical and visual condition is very good. Cgedpfothcflex Af Aet PLEASE NOTE: The price of EUR 1,900 (net) is for 1 unit!!!

Būklė: naujas, Gamybos metai: 2024, Pressing area: 3000 mm x 1800 mm Design: free-standing Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing force per cylinder: 2000 kg Cylinder stroke: 70 mm Cgodpfx Afjxzfw Us Aet Hold-down device: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 3 500 mm, bendras ilgis: 7 050 mm, bendras plotis: 4 100 mm, tūrio srautas: 36 000 m³/val, temperatūra: 80 °C, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), Įranga: apšvietimas, kabina, Paint and Drying Booth It is the centerpiece of your entire painting process: the combined paint and drying booth. (Optionally also available as a separate paint booth with a separate dryer.) Here, we rely on full-surface ceiling filters and, optionally, a full-surface floor extraction system with drive-over grating or wall extraction at the position of your choice. If you would like to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converters, we are pleased to offer you a sectional control system. This allows you to activate only the section where the parts are located—in the case of repair painting or partial booth loading (for example, if you only want to paint add-on parts). You benefit from being able to operate with reduced air volume, maintain the same quality standards, and save energy—and, ultimately, real money. Just ask us—we would be happy to demonstrate these options to you in more detail. Codpfx Ajxa H Ewsf Asgt Do you have questions or suggestions? We're happy to assist you.

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. Cgsdpjwzmcbsfx Af Ajt FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. Csdewzl Hxopfx Af Ajgt * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. * COOLING PROCESS: After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Connection rating 4 kW 1x control cabinet Pipe connection 350 mm Length 2000 mm, width 700 mm, height 1950 mm Side impact plates 1x extraction pipe D= 350 mm, 3900 mm long 1x 90° bend 350 mm 1x 45° bend 350 mm Deflector hood 350 mm Wiring diagram, operating instructions Recirculation system Air capacity max. 6500 m³/h Motor output 2 kW Cgsdpfjiau Tzjx Af Aot with heat exchanger, 1" water connection LxWxH 2150x820x820 mm 2x recirculation duct 2000x950x400 mm 1x recirculation duct 950x950x400 mm External wall connection 700x700 mm Bird screen 660x590 mm Heat exchanger outlet 400x400 mm Unfortunately, we cannot respond to enquiries without complete contact details.

Būklė: naudotas, mašinos/transporto priemonės numeris: 18331, Test stand for power up to 2.2 kW Cgjdpfx Aeghwwxjf Ast Speed control Speed changeover Hand-held remote control with cable for speed and rotation direction changeover For inverter data, see nameplate Connection cable CEE 32A Output CEE 16A Required space: W - 600 x D - 650 x H - 1,750 mm Mobile (on castors) Weight approx. 85 kg

Būklė: naudotas, Gamybos metai: 1990, Motor power: 1 kW Cgodpfx Ajwv Nbcjf Aot Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Gamybos metai: 1996, būklė: naudotas, Spaudimas 80 t Eiga 8-140 mm Eigos dažnis 105 eiga/min Kumštelio reguliavimas 100 mm Cgodporc Ipnjfx Af Aet Stalo plotas 900x625 mm Kumštelio plotas 600x280 mm Stalo pralaidos anga Ø 150 mm Stalo aukštis 1000 mm Kumštelio kiaurymė Ø 40 mm Įstatymo aukštis, kumštelio reguliavimas viršuje 490 mm Mašinos svoris apie 7 t Užimama erdvė apie PxGxA 1800x2200x2600 mm Rankinis eigos reguliavimas Rankinis kumštelio reguliavimas Mechaninė lūžimo plokštė Hidraulinė sankabos-stabdžio kombinacija Centrinis rankinis tepimas 2x volinis padavimas Zehnder+Sommer EV 320 (įėjimo ir išėjimo pusė)

Gamybos metai: 2003, būklė: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Cjdpfx Afsra Rr Es Aegt Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Būklė: naujas, Wet paints contain, in addition to pigments and additives, other hazardous components that must be mandatorily extracted. AL‑KO COLOUR JET extraction units are the ideal solution here and—with four output levels—always provide ample reserves. Cgsdpfewv T R Uox Af Aet The COLOUR JET series units are optimally designed for extracting paint mist and solvents at wet painting workstations. The front baffle plate ensures effective capture at the bottom and lateral intakes, as solvents in paints sink and accumulate near the floor. At the same time, the baffle plate facilitates even air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated by a large-area replaceable filter, and the cleaned exhaust air is then directed outdoors via a pipe or hose system. Applications: - Wet painting workstations in craft, industry, and workshops - Painting stations within ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an efficient filtration system - Flexibility due to mobile design - Cost-effective and powerful, often replaces an enclosed spray booth - Safety assured through certification for use in potentially explosive atmospheres (ATEX Zone 2) - Customizable with a wide range of accessories

Gamybos metai: 2009, būklė: nepatikrintas (naudotas), Test bench DTB 2 Cjdpfx Aokvn R Ref Aogt Year of manufacture: 2009 Disassembled Sale as individual parts This offer is exclusively for business customers as defined by § 14 BGB (German Civil Code) No sale to private individuals!

Būklė: naujas, TURBO-BOOST-TEST – Przystawka do testowania ciśnienia doładowania turbosprężarek umożliwia profesjonalną kalibrację oraz ocenę wydajności turbosprężarek. Stanowisko testowe znajduje zastosowanie w strojeniach i udoskonalaniu turbin, podczas produkcji turbosprężarek hybrydowych, a także do sprawdzania zmian parametrów turbiny po tuningu. Nasze stanowiska testowe to zaawansowane systemy do strojenia i testowania turbosprężarek w trybie dynamicznym. Umożliwiają badania pracy turbosprężarki w warunkach zbliżonych do rzeczywistych, oferując pełną kontrolę nad procesem oraz wykrywanie potencjalnych problemów, takich jak nieszczelności olejowe. ZALETY • Kompleksowe testy końcowe i strojenie turbosprężarek samochodowych dla silników do 3 litrów • Dynamiczne testowanie turbosprężarek • Instalacja na standardowych powierzchniach montażowych Cgjdpsttg S Usfx Af Aet • Dotarcie oraz sprawdzenie szczelności olejowej • Strojenie turbosprężarek z napędem elektronicznym przy użyciu testera zewnętrznego ATP-3000 • Możliwość montażu turbosprężarek dowolnej konstrukcji KLUCZOWE FUNKCJE • Baza danych ponad 2000 modeli turbosprężarek • Obliczanie wydajności turbosprężarki • Wykres ciśnienia doładowania w odniesieniu do przepływu powietrza na wlocie i wylocie • Generowanie wynikowych wykresów • Testowanie siłowników: podciśnieniowych, pneumatycznych i elektrycznych • Diagnostyka serwonapędów siłowników elektrycznych (opcja dodatkowa) • Wszystkie pomiary wykonywane w czasie rzeczywistym • Kalibracja stanowiska testowego przed rozpoczęciem pracy • Funkcja testowania zaworu N75 • Wbudowana dmuchawa zapewniająca stały przepływ powietrza • Autorskie oprogramowanie Boost Test • Tworzenie i drukowanie raportów ze strojenia • Funkcja autodiagnozy SPECYFIKACJA Maksymalna prędkość obrotowa wirnika: 99 000 obr./min Maksymalny przepływ powietrza kompresora: 110 m³/min Maksymalne ciśnienie kompresora: 900 mbar Maksymalne podciśnienie generowane przez pompę: -800 mbar Zasilanie: 380V, 3 fazy, 50 Hz Pobór mocy: 6 kW Wymiary: 1330 х 770 х 1440 mm Masa: 265 kg

Būklė: naudotas, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Ref. No.: PT-065 Description: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for the determination and analysis of bearing characteristics and values at vehicle operating points Cgjdowhdnhepfx Af Ast bearing characteristics and values at operating points under specified temperatures bearing behavior under operational load (compression set, change in characteristics) operational noise at operating points on elastomer mounts in the chassis/powertrain area Test specimens are mounted between an upper fixed plate and a lower movable plate. The movable plate is driven by a hydraulic hexapod. The fixed platform is connected to the test structure via a 6-axis force sensor. A linear actuator allows for adjustment of the distance between the two plates to accommodate a wide range of specimens and fixtures. Degrees of Freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-sectional area of 12.53 cm². Each cylinder is equipped with two parallel servo valves (38 l/min). The six cylinders drive the movable plate via six connecting rods. The connecting rods are equipped with a hydraulic spherical bearing at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear Actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a ball screw system. The linear actuator is equipped with an absolute encoder, which is mounted on the input shaft of the gearbox. Hydraulic Actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Būklė: naudotas, Gamybos metai: 1990, Used machine Year of manufacture: approx. 1990 Csdpfxewb Ehvo Af Asgt Technical specifications: BXH 2000 x 1600 mm plus 2x side impact plates and 1x upper impact plate Fan diameter 500 mm Availability: short-term Location: Rhineland-Palatinate

Būklė: naujas, Powder Coating Systems For years, powder coating has been evolving as an alternative to wet painting and has recently gained even greater importance due to its lower environmental impact, with no solvents or paint sludge produced. Especially the possibility of powder recovery enables an exceptionally high level of efficiency. For the user, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface, which is significantly more impact-resistant than what paint can provide. Additionally, post-processing such as sanding or drilling coated parts is easily possible without the coating chipping off. Pony Luxury Coating powder coating systems thus offer you tangible benefits: they are efficient, environmentally friendly, and, of course, unbeatable in terms of flexibility, as always. We achieve this with various system types. Manual Powder Coating Systems Systems that are operated manually are the ideal solution for demanding and complex workpieces. Trained staff can flexibly adapt to new conditions and continually changing product sizes. Flexibility is the top priority and is also complemented by an attractive entry price into the world of powder coating. Large-Volume Powder Spray Booths Cgedpfsxa Hzxox Af Ajt No matter how large and challenging your workpieces are, our systems are bigger! Due to the high demands in the commercial and utility vehicle sectors, powder coating has established itself here as the perfect solution. To accommodate increasingly larger components, we offer our large-volume powder booth, which allows for unrestricted manual coating and, in combination with a conveyor system, can handle workpieces of any size. Automatic Powder Coating Systems If your focus is on high throughput and rapid process speed, then an automated powder coating system is the future for your operation. Coupled with a conveyor system, light grids precisely detect and, as a result, perfectly dose the powder quantity to ensure optimal efficiency. Of course, the system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Adhesion Water Dryers The perfect finish to a powder coating process: the curing oven. Equipped with the highest insulation class, our unwavering efficiency continues in this area as well. Precise temperature control also allows use as an adhesion water dryer, enabling pre-treated materials to be dried after pre-cleaning. Additionally, temperatures up to 250°C are possible, allowing for use as a tempering oven, for example, for hot-dip galvanized materials. The typical use as a powder curing oven is, of course, easily accomplished. Optimal air distribution and a visualized control panel prevent burning and even allow for simultaneous curing of different color tones. Do you have questions or suggestions? We are happy to help you!

Būklė: naujas, Įranga: kabina, Stationary Small Spray Booth Dixi █████ Perfect and uniform coating of small parts. The extraction system ensures optimal results in minimal space. Optionally equipped with a rotary table or a wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side panels effectively limit overspray distribution, making it possible to work in small areas without contaminating surrounding spaces. Integrated lighting is also available. In addition, thanks to its low weight and minimal connections, it can be relocated to a new site in no time, maintaining your operational flexibility at all times. The system comes fully pre-assembled. Your Advantages With its compact design, flexible dimensions, and adaptable accessories, this unit offers a wide range of applications. The sophisticated modular system has a minimal footprint, making it suitable for use in any space. The various filter media and stages ensure highly efficient operation and make filter changes a matter of minutes. Cjdpjxa Hx Rofx Af Ajgt Application and Safety Thanks to the use of ATEX-certified explosion-proof motors, processing both water-based and solvent-based coatings is possible without issue. Optionally, it can also be configured for adhesive spraying. The large filter surface ensures uniform extraction throughout the booth.

Būklė: naujas, Gamybos metai: 2025, We offer you a wide selection of sheet metal bending machines and guillotine shears. What you can expect from us: fast and reliable delivery without complications, as well as professional advice and service during and after the warranty period. Guaranteed. Csdehbcxmjpfx Af Ajgt Our machine inventory is regularly updated; we use only the best machines to ensure top quality. We know our equipment inside and out, for years. And as a manufacturer, we are always up to date. Bending beam just 15 mm RED 3200/0.8mm Technical specifications: - Maximum working length: 3200 mm - Bending capacity: 0.8 mm (steel) - 1.2 mm (aluminum, copper, zinc) - Bending beam thickness: 15 mm - Bending angle: max. 150 degrees - Upper beam opening: 80 mm - Weight: approx. 600 kg - Rotary shear available for an additional 350 euros - The price includes the front depth stops and rear frame. - Bending from 3 sides -> side cut-outs - Cut-out: 60 mm/45° Delivery costs: 360.00 EUR Delivery schedule: every week Cash payment upon delivery. We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community deliveries or plus 19% VAT, as applicable.