Cnc Frezavimo Stakles pirkti naudotą (12 144)

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Control: Mazatrol 640 MT Pro Travel Paths: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid Traverse Speeds of the Axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm SUB SPINDLE Drive power: 26 kW Max. torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/Chip Disposal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure stages PLC - Dual changeover filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Counter-rotating synchronization of turning and milling spindle - C-axis 0.0001 degrees (sub spindle) - Overload monitoring system for the spindle and axis feed system Gedpfoxy Nzujx Abdobg - Automatic power on/off with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1500 U) - Hand type D3 (clamping jaws type A, B, C, D, E) - Max. workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blow device at the chuck CONTROL OPTIONS - Cylinder interpolation - Interface set - Options package for 5-axis simultaneous machining - Synchronous threading, MAZACC2D, - EIA/ISO, tool length compensation, - Fully programmable B-axis 0.0001°, - Software for 5-axis simultaneous mode, - For main and sub spindle - 3-jaw quick-change power chuck Ø 315 mm - Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 17 813 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 700 mm, sukimosi skersmuo virš skersinio stumduko: 750 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 26 W, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 80 mm, tvirtinimo skersmuo: 12 mm, sukimosi greitis (maks.): 6 000 aps./min, Hersteller: Mori-Seiki Modell: NL 2500SY/700 Baujahr: 2011 Steuerung: MXS 850 IV Technische Daten: Max. Umlaufdurchmesser über Bett: 755 mm Max. Umlaufdurchmesser über Support: 740 mm Max. Drehdurchmesser: 366 mm Drehlänge: 785 mm Verfahrwege: - X-Achse: 260 mm - Y-Achse: 100 ±50 mm - Z-Achse: 795 mm Eilgänge X/Y/Z: 30/20/50 m/min Hauptspindelleistung: 26/22 kW Spindeldrehzahl: 4.000 1/min (U/min) Stangendurchlass: 80 mm Futterdurchmesser: 250 mm Spindelaufnahme: JIS A2-8 C-Achse (Spindelindexierung): 0,001° Gegenspindel-Leistung: 11/7,5 kW Gegenspindel-Drehzahl: 6.000 1/min Gbjdpfowtfwhsx Abdog Gegenspindel-Stangendurchlass: 80 mm Gegenspindel-Futterdurchmesser: 150 mm Gegenspindelaufnahme: JIS A2-5 Gegenspindel-Indexierung: 0,001° Revolverplätze gesamt/angetrieben: 12/12 Stück Angetriebene Werkzeuge: 5,5 kW Drehzahl angetriebene Werkzeuge: 6.000 1/min Maschinengewicht: 6.200 kg Maschinenabmessungen (LxBxH): 4,34 x 2,00 x 2,12 m Ausstattung: - Späneförderer - 3-Backenfutter Kitagawa BB-210 auf Hauptspindel - Kitagawa B206 auf Gegenspindel - Teilefänger - Verschiedene Werkzeughalter - Schnittstelle für Stangenlader - Synchrongewindeschneiden Die Maschine hat 17.800 Betriebsstunden.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 800 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 610 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 725 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 260 mm, Y ašies eiga: 80 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, padavimo ilgis X ašis: 260 mm, padavimo eiga Y ašimi: 80 mm, padavimo ilgis Z ašis: 610 mm, sukimo momentas: 250 Nm, strypo praėjimas: 65 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Features: - Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, - On main/counter spindle - Latest control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Tool turret: • 12-station tool turret VDI 30 radial with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40 mm • Hollow clamping cylinder incl. draw tube Gbsdpsx E Dncofx Abdsg • C-axis for main/counter spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Rest material detection • USB interface • Control cabinet air conditioning unit • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (extra pump 3.5 bar) • Parts ejector and flushing through the counter spindle Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed COUNTER SPINDLE AS TAILSTOCK This cycle allows the counter spindle with mounted live center to be used for supporting workpieces. Thus, shaft parts can be supported and machined on machines without a tailstock by using the counter spindle. The maximum contact pressure is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for connecting robots. Implementation via HARTING connector. Signal exchange via Profinet. Safety signals 2-channel/potential-free. Digitization package for Sinumerik Condition monitoring SIEMENS ONE INTERFACE for connection to MDE/BDE systems Standard with the following information: • Machine on - AUX ON • Automatic operation • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 3D data model of the machine including: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts can be transported to a catch box (standard) or via a conveyor belt (option). • Max. finished part length: 175 mm • Max. finished part diameter: 65 mm • Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 For connecting the EMCO SL1200 short bar loader. etc.... Machine is available immediately!

Sąlyga: naudotas, Gamybos metai: 2010, tekėjimo ilgis: 6 500 mm, tekėjimo skersmuo: 880 mm, veleno skylė: 165 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D, Description: General: Year of manufacture: 2010 Control system: Siemens 840 D Turning diameter: 880 (750) mm Swing diameter: 900 mm Turning length: approx. 6,500 mm Spindle bore: 245 mm Tool holder: Capto C8 Main spindle: Technology: Geared spindle Speed: 1,600 rpm Power: 60 kW Torque: 4,472 Nm C-axis: 0.001° Spindle bore: 165 mm 3-jaw chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology: Swivel head with milling spindle Speed: 6,000 rpm Power: 30 kW Tool holder: Capto C8 Torque: 315 Nm X-axis: 920 mm Y-axis: 500 mm (-200/+300 mm) Z-axis: 6,870 mm B-axis: 200° (-110°/+90°) Tailstock + Steadies: Godpfx Ajx Axyljbdjbg Quill diameter: 180 mm Quill stroke: 200 mm Steady rest carriages: 2 units, 400 mm wide Steady rest I: SMW Autoblock SLU (45 - 310 mm) Steady rest II: SMW Autoblock SLU (125 - 460 mm) Tool magazine I: Technology: Drum magazine (double) Number of stations: 72 units Tool changer: Double gripper on shuttle Max. tool diameter: 110 mm (250 mm) Max. tool length: 800 mm Max. tool weight: 25 kg Tool magazine II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure system, 80 bar Coolant temperature control: Immersion recooler Workpiece measurement: Wireless measuring probe Emulsion mist extractor: LTA air clean Work area door: Automatic Set-up mode: Electronic handwheel Tools: Various Capto C8 holders Steadies: 2x SMW Autoblock steady rests 3-jaw chuck: SMW Autoblock KNCS-N-630-165

Sąlyga: geras (naudotas), The machine is in good technical condition. Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 10,500 kg Total table area: 1000 x 5000 mm Number of T-slots: 7/140 mm Width of central slot: 22H7 Longitudinal travel (X axis): 5000 mm Transverse travel (Y axis): 1000 mm Vertical travel (Z axis): 1400 mm Minimum distance from horizontal spindle axis to clamping surface of the table: 150 mm Minimum distance from vertical spindle face to clamping surface of the table: 125 mm Spindle taper: ISO 50 Spindle diameter in front bearing: 100 mm Tool taper: ČSN 22 0434 (DIN 69 871 - A 50) Clamp mechanism pull force: 16,100 N Horizontal spindle rotation – bilateral: +177.5° ÷ -180° Vertical spindle rotation – bilateral: +177.5° ÷ -180° Gbodpfxsx Ai Igs Abdog Usable main drive motor power: 22 kW Spindle speed range: 11–2500 rpm Spindle speed steps: stepless Feed rate range: 1–5000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 15 m/min Maximum feed speed before approaching reference point: 3000 mm/min Spindle head rotation around the machine’s transverse axis: +177.5°, ±180° Partial general overhaul has been performed on the machine.

Sąlyga: naudotas, CNC Gantry Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed-type milling machine, designed similarly to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 “Refurbished 2025” The machine will be fully refurbished in 2025 and can then be inspected at the warehouse in 37235 Hessisch Lichtenau. Travel distances X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 slots, 22 mm width, spacing 130 mm Table load capacity max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed 60–4000 rpm, stepless Feed rate up to 10,000 mm/min, stepless Rapid traverse X + Y 20 m/min Rapid traverse Z 10 m/min Spindle drive 22 / 30 kW Power supply 400 Volt, 50 Hz, 50 kVA - 30-station automatic tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swiveling in two 45° planes – B + C axis - HEIDENHAIN iTNC 530 CNC control, with electronic handwheel - Pre-equipped for wireless touch probe (probe and receiver not included) - Additional HF spindle, 18,000 rpm – for attachment Gbodpoxcgtgofx Abdog - Free-standing control cabinet - Chip conveyor installed between gantry bed and machine table - 32,078 operating hours displayed - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Machine installation footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete) approx. 33 tons Good condition

Sąlyga: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 2 400 h, Funkcionalumas: visiškai funkcionalus, 2-axis universal turning center with driven tools, C-axis, Y-axis and sub-spindle Machine in extremely well-maintained condition Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axis Chip container Hydraulic hollow clamping cylinders, max. bar capacity D80 mm Sub-spindle A2-6" with spindle motor ISM 52, output 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis ± 60 mm DMG MORI IoTconnector Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Part catcher for up to D80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loading device (DMG MORI standard) Right-side chip conveyor Signal lamp with 4 colors Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Pass-through D78 mm (limits bar capacity to D78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Pass-through D66 mm Draw tube inner diameter D52 mm Sub-spindle options External chuck rinse Pneumatic ejector with internal coolant supply Coolant / chip removal 12 bar high-pressure system with double filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Manual tool measuring probe MARPOSS General options Parts conveyor front left instead of parts container Conveyor belt outside the work area Clamping jaw options Set of soft jaws for BB-D 210 (3 pieces per set, 3 sets) Set of soft jaws for BB-D 250 (3 pieces per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle alternating spindle speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Gjdpfx Aex Tg I Ujbdebg Special equipment / accessories Hydrafeed MSV 80 with floor rails, barfeed magazine, and modifications Swarf bin (model 350) VDI40 holder with multiple seats D1 (2 pieces) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pieces) VDI40X25X100 25Ø boring bar holder (1 piece) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 piece) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 piece) Cut-off holder H=32 mm, VDI40, universal toothing (1 piece)

Sąlyga: beveik kaip naujas (naudotas), Parduodu nuotraukose matomą Vokietijos gamintojo Deckel frezavimo staklę FP2A modelį. Staklės yra idealios būklės, kaip naujos. Valdiklyje yra plombos. Paruošta darbui. Suteikiu staklės pakrovimą vietoje. Staklės duomenys: - Dialog 11 valdymas - Apsisukimų diapazonas 0-4000 - X – 300 mm - Y – 300 mm - Z – 400 mm Pilnas dokumentacijos komplektas, tarp jų: - Staklės naudojimo vadovai - Programavimo vadovai - Klaidų aprašymai ir jų šalinimas - Techniniai duomenys - Elektrinės schemos Su staklėmis pridedamas įrankių rinkinys: - 2 spaustuvai 150x300 - 3D ruošinio matavimo jutiklis - Įrankių ilgio matavimo prietaisas Gsdsxq Rymjpfx Abdsbg - ER32 komplektas - Tvirtinimo kotai - Frezavimo galvutė

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, Valdymas: HEIDENHAIN TNC 426, prijungimo galia: 7,7 kW, įskaitant 3R WorkPal vartytuvą, su dokumentacija popieriuje, be atsarginių dalių. Gbjdpfx Abex Tpytjdsg

Sąlyga: naudotas, Description: Main spindle: Technology: Motor spindle Speed: 4,200 rpm Power: 22 kW Torque: 427 Nm Spindle bore: 91 mm Hollow clamping cylinder: 86 mm C-axis: High precision package Chuck: SMW KNCS-N 275-86 K8 Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 22 kW Torque: 420 Nm Spindle bore: 80 mm Hollow clamping cylinder: 77 mm C-axis: High precision package Chuck: SMW BHD-FC 210-52-3 Turret X/Y/Z/B: Technology: Milling spindle Speed: 12,000 rpm Power: 22 kW Torque: 120 Nm Tool interface: HSK 63 Y-axis: 250 mm (+/- 125 mm) B-axis: 240° Tool magazine: Number of stations: 80 Equipment / Accessories: Measuring systems: Direct in X/Y/Z axis (glass scales) Chip disposal: Chip conveyor Gbedpfx Abewu I Iredsg Coolant supply: ICS unit, 70 bar Coolant temperature control: Deltatherm E4 Chip flushing: Working area, hand gun Accuracy package: High-precision C-axes Software package: 5-axis auto-tuning Software option: Multifunction tool Gear machining software: Hobbing, Power skiving Control extension: Conversational programming Workpiece probing: Renishaw probe Tool measurement: Tool setter Tool breakage monitoring: Renishaw TRS2 B-axis: NC function and turning function Bar feeder: LNS Quickload Servo III+ Preparation for automation: Robot interface Work area door: Automatic Setup mode: Electronic handwheel

Sąlyga: geras (naudotas), Description: The machine is in good technical condition; testing is possible by prior arrangement. Control system – Siemens, including filtration. Bed slope, bed material, number of guides: 45° cast iron, 3 (4 with Y-axis option). WORKING AREA (V1-V4): Gbedpfx Abex Apkzedeg - Swing diameter over bed (in): 19.69 - Swing diameter over cross slide (in): 11.42 - Maximum turning diameter (in): 7.87 - Distance between centers (in): 30.71 - Maximum turning length (in): 19.69 (15.82/20) - Max. weight of unsupported workpiece (lb): 35 - Max. center of gravity distance of unsupported workpiece (in): 16.5 from spindle face - Max. weight of workpiece clamped between centers (lb): 100 - Travel X-axis (in): 7.48 - Travel Y-axis (optional) (in): 3.14 (+/- 1.57) - Travel Z1-axis (in): [not specified] - Travel Z3-axis (in): [not specified] - Spindle center height above floor (in): 20.67 / 21.65 / 39.26 (38.77 + 1.18) MAIN SPINDLE: - Spindle nose (flat nose) type: FL 140h5 - Chuck diameter (in): 6.69 (option 8.26) - Bar capacity (in): 2.00 - Spindle bore diameter (in): 2.87 - Guide bushing diameter (in): 2.05 - Inner diameter front bearing (in): 3.94 - Spindle bearing lubrication: grease - Power, max. 100/40% duty cycle (hp): 20.82/36.20 - Speed range, 100% duty cycle (rpm): 6000 - Speed range, 40% duty cycle (rpm): 6000 - Rated speed (rpm): 1500 - Max. torque, 100/40% duty cycle (ft*lb): 93.72/125.46 - Power supply type, number of ranges: AC/1 - Motor type: ISM52

Sąlyga: geras (naudotas), Gamybos metai: 1995, Centras aukštis: 330 mm Atstumas tarp centrų: 2000 mm Darbo sritis: Maks. tekinimo skersmuo virš lovos dangčio: 650 mm Gsdpfx Abjx Sx Htedjbg Maks. tekinimo skersmuo virš skersinio vežimo: 360 mm Pagrindinis velenas: Veleno Ø priekyje: 140 mm Veleno skylė: 107 mm Pagrindinis variklis: 58,5 kW 2 pakopų sūkių diapazonas: 4–750 aps./min. / 750–3060 aps./min. Pajudėjimo pavara: Greitoji eiga X-/Z ašys: 10/10 m/min Būgninis revolveris: Įrankių vietų skaičius: 12 Varomų įrankių vietų: 6 Cilindrinės kotelės laikiklis: VDI 50 mm Matmenys / svoris: Užimamas plotas I x P x A: apie 6400 x 2150 x 2000 mm Svoris: 9400 kg Priedai / ypatingos savybės: • CNC takelio valdymas GRUNDIG EPL 2 su spalvotu ekranu • Veleno orientavimo C ašis • 12 padėčių revolveris, VDI 50, iš jų 6 padėtys su varomais įrankiais, gamintojas SAUTER • Hidraulinis 3 žiužmų griebtuvas • Hidraulinė atrama • Drožlių transporterio konvejeris • Nusiurbimo įranga, gamintojas LTA • Atitinka CE reikalavimus Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: naudotas, Gamybos metai: 2005, Turning diameter: 140 mm Turning length: 600 mm Control: Siemens 840 D PowerLine Distance between spindles: 615 mm Max. spindle speed: 5,000 rpm Main spindle drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar capacity: 65 mm Spindle bearing diameter: 110 mm Max. speed (counter spindle): 5,000 rpm Counter spindle drive power: 20 / 27 kW Max. torque (counter spindle): 105 / 145 Nm C-axis: 0.001° Chuck diameter (counter spindle): 140 - 160 mm Spindle nose (counter spindle): ISO 702/1 A5 Max. bar capacity (counter spindle): 65 mm X-travel: 150 mm Z-travel: 600 mm Spindle bearing diameter: 110 mm Number of turrets: 3 positions Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 positions Number of driven tool stations: 3 x 12 positions Speed range (driven tools): max. 6,000 rpm Drive power (driven tools): 8 kW Max. torque (driven tools): 16 Nm X-travel 1/2/3: 110 mm Z-travel 1/2/3: 360 mm Y-axis 1/2/3: 70 mm B-axis: 2x +/-1° Gbjdpfx Abox R En Iodsg Rapid traverse (X / Y / Z): 25 / 12 / 50 m/min Total power requirement: 53 kVA Machine weight approx.: 6.5 t Space requirements approx.: 8.0 x 3.5 x 2.5 m High-performance CNC turning and milling center INDEX - C65 SpeedLine - Main and counter spindle - 3 tool turrets - 2(3) Y-axes +/-35 mm - 2 B-correction axes (+/-1°) - 3 x 12 driven tool stations - IRCO - Profimat 65.6

Sąlyga: naudotas, Naudotas „Deckel“ FP3a modelio įrankių frezavimo staklės metalo apdirbimui. Įrenginys naudotas, tačiau yra tvarkingas ir paruoštas darbui. Tvirtos konstrukcijos, turintis daugybę funkcijų preciziškam metalo apdirbimui. Kaina nurodyta be PVM (pridedamas 23% PVM). Veleno variklis: 2/4 kW Veleno greitis: 25–2500 aps./min. Velenas: SK 40 Pinolės eiga: 100 mm Padavų variklis: 1,5 kW Padavų greitis: 5–500 mm/min. Padavų korekcija: 0–120% Greiti padavimai: 1500 mm/min. Gbodoxluu Repfx Abdeg Mechaniniai/rankiniai stalo poslinkiai: X 490/500 mm Y 290/300 mm Z 390/400 mm Galvutė gali būti paslinkta 200 mm Staklių svoris: 1750 kg Didžiausias apdirbamo ruošinio svoris: 500 kg

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 used CNC turning-milling center Gildemeister Model TWIN 65 RG 2, year 2008 with Siemens 840 D Maximum turning length (Z-axis travel): 650 mm Maximum turning diameter over bed: 250 mm Maximum X-axis travel: 300 mm Maximum feed rate X-axis: 30 m/min Maximum feed rate Z-axis: 30 m/min Maximum main spindle power: 35 kW Spindle bore diameter: 65 mm Minimum main spindle speed: 20 rpm Maximum main spindle speed: 5,000 rpm Machine length: 7,000 mm Machine width: 4,700 mm Machine height: 2,500 mm Machine weight: 10 t Equipment - Y-axis Godpfx Asq T I Izobdsbg - Irco bar feeder ILS RBK 1200 mm - Workpiece removal device Technical data subject to change Note: The machine is sold without a chuck, as the chuck remains with the seller!

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840 Dsl, Description: General: Year of manufacture: 2013 Control: Siemens 840 Dsl Turning length: 1,185 mm Swing diameter: 540 mm Bar capacity: 75 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing + spindle through-coolant Tool carrier I (X/Y/Z/B): Technology: Milling spindle on travelling column Milling spindle speed: 12,000 rpm Max. power: 22 kW Tool interface: Capto C6 X-axis: 450 mm Y-axis: 200 mm Z-axis: 1,200 mm B-axis: +/- 110° Measuring systems: Direct (glass scales) Tool carrier II (/X/Y/Z): Technology: Tool turret on cross slide Tool drive: Direct drive Speed: 10,000 rpm Power: 14 kW Torque: 34 Nm X-axis: 195 mm Gbodpfoxl Nfqsx Abdeg Y-axis: 80 mm Z-axis: 1,200 mm Tool interface: VDI 40 Number of tool stations: 12 units Automation: Technology: Gantry loader with stack magazine Workpiece diameter: 50 - 200 mm Max. workpiece height: 230 mm Max. workpiece weight: 15 kg Number of stack adapters: 20 units Max. load per stack adapter: 40 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 80 bar Tool magazine: Chain magazine, 120 stations Workpiece measurement: Renishaw probe Tool breakage monitoring: Swing wire Automation: Gantry loader with stack magazine Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Work area door: Automatic Chucks: 2x SMW KNCS 260 Tool holders: Various Capto C6 holders

Sąlyga: naudotas, Gamybos metai: 2005, veikimo valandos: 60 683 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 524 mm, tekėjimo skersmuo: 820 mm, veleno greitis (min.): 3 300 aps./min, veleno skylė: 104 mm, X ašies eiga: 870 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 1 598 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 40 m/min, Įranga: sūkių greitis be galo kintamas, MAZAK CNC Lathe MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control System for sale. The machine is in good condition and can be inspected under power at its current location. Maintenance records for the machine are available for documentation. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Gjdpex Syldsfx Abdsbg Technical Data: - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1,524 mm Main Spindle: - Speed range: 0–3,300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001° Sub Spindle: - Speed: 0–3,300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001° Milling Spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0–10,000 rpm - Tool holder: SK50 Tool Magazine: - Number of tool positions: 120 Travel: - X: 870 mm - Z: 1,598 mm - Z2: 2,458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Rapid Traverse Rate: - X/Y/Z: 40 mm/min Machine Data: - Connected load: 104 kVA - Operating voltage: 400 V / 50 Hz - Required installation space (L x W): 7 x 3.5 m Special Equipment: - Tool magazine with 120 positions - High-pressure coolant system, 70 bar - Renishaw - Laser measuring system for rotating tools - Interface set - Air/water cooling through the spindle - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Sąlyga: naudotas, Gamybos metai: 2019, Eigos ilgis - x 900 mm Eigos ilgis - y 200 mm Eigos ilgis - z 800 mm Godpfex Szmvox Abdebg B ašies pasukimo diapazonas ° Pozicionavimo tikslumas C: 9 '' Valdymas: SIEMENS Veleno apsukų skaičius 0 - 6 000 CNC vertikalus tekinimo ir frezavimo centras | PITTLER - PV 315 Staklės yra labai gerai prižiūrėtos būklės. Išsami techninė informacija apie stakles bus pateikta netrukus. Dėkojame už jūsų supratingumą!

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 1 000 mm, ruošinio plotis (maks.): 800 mm, ruošinio aukštis (maks.): 400 mm, veleno greitis (min.): 1 000 aps./min, veleno greitis (maks.): 36 000 aps./min, Puikiai tinka: itin efektyvus 3D frezavimas mažiems ruošiniams – preciziškas frezavimas su dideliu dalių našumu Medžiagos: plastikai, kompozitai (pvz., anglies ar stiklo pluoštu armuoti kompozitai), modelinės medžiagos, aliuminis Sektoriai: automobilių pramonė, aviacija, transportas ir logistika, laisvalaikio pramonė, santechnika, laivų statyba, automatizacija _____ Nuorodos numeris: 1218 Prieinamumas: 2026 m. kovo mėn. Modelis: 5 ašių CNC frezavimo įrenginys RT-F 1400 Veleno duomenys: 8 kW / 6,4 Nm; 1000–36000 aps./min.; HSK E 40 Greitaeigis X/Y/Z: 40/40/30 Godpexdwndsfx Abdobg Detalės matmenys X/Y/Z: 1000 x 800 x 400 mm Valdiklis: SIEMENS – Sinumerik One su HT 2 Įrankių keitiklis: 12 įrankių Stalai: 1 apvalus stalas Įrankių gedimo ir ilgio kontrolė: Renishaw-TS 27 R Kita: drožlių lovys, perforuotas užlipimo laiptelis Pagaminimo metai: 2026 Būklė: nauja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 403 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 200 mm, veleno skylė: 120 mm, valdiklio modelis: Siemens 840 Dsl, Įranga: dokumentacija / vadovas, Technical Data: Turning length: 1200 mm Chuck diameter: 350 mm Traverse stroke X axis (up/down): 200 mm Traverse stroke Y axis: 210 mm (+130/-80) Traverse stroke Z axis: 1200 mm Maximum rapid traverse speed W/X/Y/Z (m/min): 45/40/40/46 Ball screw diameter W/X/Y/Z (mm): 40/40/40/40 Profile rail guide B/X/Y/Z (mm): 45/45/45/55 Tool swing diameter: 700 mm Maximum distance between centers: 1200 mm Main spindle / sub-spindle: Spindle bearing diameter: 120 mm / 160 mm Spindle bore: 65 / 105 mm Spindle hole diameter: 80 / 120 mm Spindle flange / spindle nose DIN 55026: A6 / A8 Drive power 100% duty cycle: 22 kW / 67.4 kW Drive power 40% duty cycle: 24 kW / 80 kW Nominal speed: 1400 rpm Max. speed: 5,700 rpm Torque 100% duty cycle: 150 Nm / 585 Nm Torque 40% duty cycle: 191 Nm / 795 Nm C-axis resolution: 0.001 degree Both turrets: Tool holder: VDI 40 Gjdpfevw Upcox Abdebg Max. speed (rpm): 6,000 (torque drive), 12,000 (speed drive) Max. drive power (kW): 28.5 (torque drive), 23.5 (speed drive) Max. torque (25% duty cycle, Nm): 85 (torque drive), 56 (speed drive) Dimensions: 4,500 x 2,500 x 2,500 mm Weight approx. 16,000 kg Control: Siemens 840 Dsl

Sąlyga: naudotas, Description: General: Year of manufacture: 2009 Control system: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Gedpfxovxmy Ne Abdsbg Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry loader Bar loader interface: Electrically prepared Tool monitoring: Drill breakage control

Sąlyga: naudotas, Gamybos metai: 2019, Griebtuvo skersmuo: 500 mm Didžiausias apsukimas virš lovos skersinio: 700 mm Valdymas: Siemens X ašies eiga: 630 mm Gjdjx Szlrjpfx Abdobg Z ašies eiga: 500 mm Vertikalus CNC tekinimo ir frezavimo centras | EMAG - VMC 450 MT Staklės yra labai gerai prižiūrėtos. Atkreipkite dėmesį, kad techninės specifikacijos perimtos iš panašių staklių.

Sąlyga: naujas, Gamybos metai: 2026, Puikiai tinka: didelio efektyvumo 3D frezavimui mažiems ruošiniams – tikslus frezavimas su dideliu dalių našumu Medžiagos: plastikai, kompozitai kaip CFK / GFK, modelių gamybos medžiagos, aliuminis Sektoriai: automobilių pramonė, aviacijos pramonė, transportas ir logistika, laisvalaikio industrija, sanitarinė įranga, laivų statyba, automatizavimas _____ Nuorodos numeris: 1221 Gbodpfxox S E Nbo Abdog Prieinamumas: 2026 m. balandis Modelis: 5 ašių CNC frezavimo centras G-S-F/B (25-10) Veleno duomenys: 8 kW / 6,4 Nm; 1000–36000 1/min; HSK E 40 Greitas poslinkis X/Y/Z: 80/80/60 Detalės matmenys X/Y/Z: 2500 x 1300 x 600 Valdymas: SIEMENS – Sinumerik One su rankiniu pultu HT 2 Įrankių keitiklis: 13 įrankių Stalai: 1 apvalus stalas Vakuumo sistema: taip Įrankio lūžio ir ilgio kontrolė: Renishaw-TS 27 R Kita: pagal užklausą Pagaminimo metai: 2026 Būklė: naujas

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 used turning and milling center, manufacturer: Doosan Model: Puma MX 2000 T Year: 2008 with Fanuc 16 i-TB control Maximum turning diameter: 540 mm Maximum turning length: 1,020 mm Milling spindle: Drive power: 18.5 kW Maximum spindle speed: 10,000 rpm B-axis: 240° Tool magazine / ATC: Tool positions: 80 Main spindle: Drive power: 15 kW Maximum spindle speed: 5,000 rpm Maximum bar passage: 65 mm Lower turret: with 12 driven tool positions Gbodpfxeqqivve Abdjg Maximum spindle speed: 4,000 rpm Chip conveyor and coolant system Weight: 12 t Machine height: 2,600 mm Technical data subject to change/errors expected

Sąlyga: naudotas, Gamybos metai: 2024, valdiklių gamintojas: Siemens, valdiklio modelis: 840 Dsl - Operate, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 17 kW Torque (max.): 345 Nm Clamping cylinder: Hollow clamping cylinder Bar capacity: 67 mm Workpiece clamping: 3-jaw chuck, Schunk Rota THW 315-104 Counter Spindle: Technology: Motor spindle Godox Ih Rtjpfx Abdebg Speed: 5,000 rpm Power (max.): 17 kW Torque (max.): 345 Nm Clamping cylinder: Semi-hollow clamping cylinder Workpiece clamping: 3-jaw chuck, SMW Autoblok 250 BB Travel in Z: 1,200 mm Tailstock force: 2.5–6 kN Tool Carrier (X/Y/Z/B): Technology: Traveling column with milling spindle Speed: 12,000 rpm Power (max.): 10.5 kW Torque (max.): 90 Nm Tool interface: HSK-A63 B-axis swivel range: +/- 120° General: Tool magazine: Chain magazine, 60 stations Travel in X/Y/Z: 750/200/1,100 mm Rapid traverse in X/Y/Z: 40 m/min Equipment / Accessories: Position measurement system: Direct (glass scales) in X/Y Chip management: Chip conveyor Coolant management: Through-spindle coolant system with paper band filter and high pressure, 20 bar Workpiece measurement: Wireless probing system, Renishaw RMP 40 Tool breakage detection: Blum Z-Nano Tool monitoring: Easy Tool Monitor Automation: Automation package (automatic work area door, electric interface Robo2Go) Emulsion mist separator: Mechanical separator, AFS 1100 Setup mode: Electronic handwheel Technology cycle: Alternating spindle speed Digital Manufacturing: IoT Connector Additional equipment: Spindle chiller, cleaning gun