Chambered Gydytojas Ašmenys pirkti naudotą (2 848)

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Nominal Voltage: 400V 3/N PE 50 Hz Nominal Power: 6.7 kW Nominal Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Chsdpeziycbefx Aa Dja Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display of setpoint and actual temperature values - Easy adjustment using +/- button - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-supplied test specimen sensors Shelving: Stainless steel, support surface 820 x 710 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate: measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Maximum heat radiation: 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Nominal power: 6.7 kW Nominal current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Important security information for buyers! The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), We are offering a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touchpanel" All control and operation commands can be triggered simply by touching the function symbols on the "Touchpanel" control unit. Adjustable Feet To compensate for floor unevenness and ensure sufficient ventilation of the machine components, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring lines and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm (Refrigerant converted to R-452A) Test Chamber Volume: approx. 600 liters External Dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Chsdpsziyb Refx Aa Dsa Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max.: 2500 W Operating Data: Internal lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors excepted!) Feel free to contact us by phone for any further questions.

Būklė: naudotas, Nabertherm Nabertherm N 2260/S kamerinė krosnis su vieliniu kaitinimu, iki 1300 °C Techninės charakteristikos – Nabertherm N 2260/S Parametras / Reikšmė Modelis: Nabertherm N 2260/S Maksimali temperatūra: 1300 °C Įtampa / prijungimas: 400 V, 3~ (trifazė srovė), PE (apsauginis laidas) Šiluminė galia: 75 kW Kaitinimo zonos: penkiasienis (šonai, dugnas, durys, jei reikia, lubos) Vidiniai matmenys (degimo kamera) Matmuo / Reikšmė Plotis (b): 1.500 mm Gylis (l): 1.000 mm Aukštis (h): 1.720 mm Cjdpfx Aszix D Rea Deha Grindų apkrova: 10 kg/dm² Tūris: apie 2.580 litrų Išoriniai matmenys (viso įrenginio) Matmuo / Reikšmė Ilgis (L): 2.000 mm Plotis (B): 2.250 mm Aukštis (H): 2.850 mm Svoris: apie 3.100 kg Būklė: naudotas Pristatymo komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi!) Dėl papildomos informacijos kreipkitės telefonu.

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg Chodpfxspq If Do Aa Dja - immediately available -

Būklė: naudotas, Techniniai duomenys Gamintojas: Stahl Tipas: 8220 Konstrukcija: pramoninis krosnis / kamerinis krosnis Būklė: naudotas Kiti techniniai duomenys, nurodyti ant etiketės Įranga Patvari ir ilgaamžė konstrukcija Elektrinis šildymas Temperatūros reguliavimas, užtikrinantis tikslius procesus Geras šilumos paskirstymas darbo zonoje Tinka naudoti profesionaliose srityse Chodpoznv Eijfx Aa Dja Naudojimo sritys Metalinių dalių terminis apdorojimas Atkaistinimas ir grūdinimas Džiovinimo procesai Ruošinių pašildymas Laboratoriniai ir bandymų pritaikymai Moksliniai tyrimai ir kūrimas Kameros išmatavimai (vidiniai): Plotis 1000 Aukštis 1000 Gylis 800

Būklė: naudotas, Gamintojas: David + Baader, Kandel Tipas: 10880.3 Mašinos tipas: pramoninis krosnis / kamerinis krosnis / terminio apdorojimo krosnis Parduodamas naudotas pramoninis krosnis, gamintojas David + Baader Kandel, tipas 10880.3. Krosnis tinka įvairioms reikmėms pramonėje, amatuose, laboratorijose ir dirbtuvėse, idealiai tinkama terminio apdorojimo, džiovinimo ar kaitinimo procesams. Techniniai duomenys Gamintojas: David + Baader Kandel Tipas: 10880.3 Konstrukcija: elektrinis kamerinis krosnis Būklė: naudotas Papildomi techniniai duomenys teiraujantis arba pagal etiketę Įranga ir privalumai Patvari pramoninė konstrukcija Tolygus šilumos paskirstymas Patikima temperatūros kontrolė Stabili krosnies kamera Tinka nuolatiniam naudojimui Patikima vokiška kokybė Galimi panaudojimo sritys Metalo dalių terminis apdorojimas Kaitinimo ir atleidimo procesai Džiovinimo procesai Chsdpfxsznv Dfe Aa Dsa Laboratorijos ir bandymų pritaikymas Moksliniai tyrimai ir plėtra Dirbtuvių ir gamybos veikla Kameros išmatavimai (vidiniai): Plotis 700 Aukštis 700 Gylis 700

Būklė: naudotas, Gamintojas: W.C. Heraeus Hanau Tipas: KR 260 Mašinos tipas: Elektrinis kamerinis krosnis / laboratorinis krosnis / terminio apdorojimo krosnis Parduodamas aukštos kokybės pramoninis krosnis, pagamintas žymaus gamintojo W.C. Heraeus Hanau, modelis KR 260. Šis krosnis puikiai tinka terminio apdorojimo procesams, atkaistinimo darbams, medžiagų tyrimams, laboratorinėms reikmėms bei mokslinių tyrimų ir kūrimo užduotims. Savybės: Patvari pramoninė konstrukcija Chsdpsznvzdjfx Aa Dea Elektriniu būdu šildomas kamerinis krosnis Tolygus temperatūros paskirstymas Temperatūros reguliavimas, užtikrinantis tikslius procesus Idealiai tinka laboratorijoms, dirbtuvėms, pramonei ir moksliniams tyrimams Aukštos kokybės vokiška gamyba Maksimali temperatūra: 1150 °C Įtampa: 330 V, 50 Hz Galia: 11,4 kW, 20 A Naudojimo sritys: Metalų terminis apdorojimas Atkaistinimas ir grūdinimas Medžiagų tyrimai Keramikos ir laboratorinės reikmės Moksliniai tyrimai ir kūrimas Kameros vidaus matmenys: Plotis: 260 Aukštis: 180 Gylis: 500

Būklė: labai geros būklės (naudotas), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-cooled The Weiss Climate Chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as conditioning of samples and materials within a range of −70 °C to +180 °C. Simcon/32 - Net control system Technical Data: Chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Cjdpfszimg Hjx Aa Doha Height: 1995 mm, Width: 1000 mm, Depth: 800 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Specifications for temperature tests: Temperature range: -70 °C to 180°C Temperature deviation over time at chamber center: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: at +20 °C: 5000 W at -20 °C: 5000 W Specifications for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature deviation over time at chamber center: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time at chamber center: ± 1 to ± 3% r.h. Heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16.5 kW Nominal current: 29 A Required fuse: 32 A slow-blow Permissible test specimen weight: Total load on shelf supports: 80 kg Chamber floor: 80 kg, Shelf insert: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, the following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS Model: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It provides precise temperature and climate simulations over an extremely wide operating range. This professional climate and temperature conditioning system from CTS GmbH comprises: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test spaces or test chambers with precisely controlled temperature and humidity levels. Chodpfx Aozimgaea Dsa Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, and lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% rH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A (slow-blow) Connection type: Hardwired Refrigeration system: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54; Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Important safety information for buyers! The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful completion, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of the water protection classes of enclosures or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests The SWT system can cover a wide range of tests (depending on configuration): Basic configuration: IPX3 / IPX4 tests (spraying or all-direction splash water). Optional: Higher protection classes up to IPX5 / IPX6 (water jets), and — with suitable high-pressure equipment — up to IPX9 or IPX9K. Tests are conducted according to standards such as DIN EN 60529 (for IP protection classes) and ISO 20653 (e.g. for vehicle or outdoor applications), depending on requirements and field of application. Typical areas of application Typical application scenarios for such a test chamber include: Electronic devices or enclosures intended for outdoor use or humid environments, e.g. outdoor lighting, control enclosures, power units, panels. Components for vehicles or machinery, especially when exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). Batteries or electrical components that must be tested for water resistance – e.g. in the automotive industry or for e-mobility. Technical Data: Suitable protection classes: IPX3 / IPX4 Oscillating pipe radius (for IPX3/4 tests): 200 mm as standard (for SWT 1000), optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W×H×D) Cedpfszil T Ssx Aa Dsha Operation / control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Būklė: naudotas, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use incl. PC, Software & Technical Documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber Chsdpfx Aaszil Txs Doa - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Specifications – Scienlab SL1001A: Feature / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, and cycling of battery modules Condition: Very well-maintained, lab use Technical Specifications – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Feature / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year: 2019 Weight: approx. 1,225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% rH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring/Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software PC + Software + Documentation Industrial PC with control and measurement software Enables automated test sequences, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total System approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifecycle evaluation of battery modules (e.g., Li-Ion, LFP, NMC) - Rapid charging and cycle tests - Environmental simulation of temperature and humidity - Research, industrial, and university laboratories Important Note: "The bench shown in the photos is not included in the sale." Scope of Delivery - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) For further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is perfectly suited for rapid temperature change tests (e.g. according to IEC, MIL-STD, JEDEC) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 liters Internal basket/test area dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Changeover Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between zones): < 10 seconds Heating rate up to 17 °C/min Cooling rate up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity Cjdpfx Aaozii A Ro Dsha Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Capacity & Lifting System Basket/lifting system capacity: 20 kg maximum load Transfer basket secured by protective mesh on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Recommended fuse 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Buyer Safety Information: For your safety as a buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Renewal of refrigerant with legally compliant media if necessary 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) We will be happy to answer further questions by phone.

Būklė: naudotas, Liebisch KEA 300 Constanzo Fully functional condensate testing device for material and coating tests Description: The unit is designed for conducting condensation water or water vapor tests according to common standards (e.g., DIN EN ISO 6270). Ideally suited for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The construction is robust and low-maintenance, making it excellent for research, laboratory, and quality testing applications. Technical data: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Rated power: 1,400 W Chamber size: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Control: none / manual operation Chodpfx Aaozii Aqj Dja Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss UV200SB Weathering Chamber / UV Ageing Test Device Air-cooled, approx. 200 litres For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This chamber is used for accelerated ageing tests on plastics, paints, coatings and other materials in accordance with standard norms (e.g. DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp Type: Fluorescent UV lamps Temperature Range (UV Phase): approx. +20 to +80 °C Climate Cycling: Alternating UV exposure, condensation and spray phases Humidity Range: approx. 10% – 95% rH (relative humidity) at temperatures above approx. +10 °C Temperature Change Rate: approx. 3 K/min Test Chamber Dimensions: Height 750 mm, Width 650 mm, Depth 400 mm External Dimensions: Height 1800 mm, Width 920 mm, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated Power: 9.0 kW Rated Current: 15.0 A Refrigerant: R 404A For your security as a buyer, please note the following: The following actions are carried out on our chambers prior to sale: Chsdpfsziiz Hex Aa Dsa 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Specifications and details are subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cedsziizyepfx Aa Deha Cooling: Water-cooled refrigeration unit, Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Būklė: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Chsdeziiztepfx Aa Doa Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Atlas Type: SC 350 MHG Atlas Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climate chamber with sunlight simulation using an MHG lamp). The unit is suitable for conducting standardized weathering and aging tests under combined exposure to radiation, temperature, and climate conditions. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Feedthroughs for measurement lines provided - Control via operating panel or interfaces (RS232 etc.) - Durable test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Illumination unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering: Spectrum 300–3,000 nm, standard-compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Cjdjziizmjpfx Aa Doha Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber Type: C -40/600 Air-Cooled (converted to R-452A refrigerant) Test chamber volume: 600 liters Cjdeziizgepfx Aa Deha Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K (over time, in steady-state conditions) - Average temperature change rate (without test specimen and without radiant heat): Heating: 2.5 K/min Cooling: 3.0 K/min - Radiant heat max. 2500 W at +20°C Climate testing: Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Humidity consistency II: ±1% r.h. to ±3% r.h. Temperature consistency: ±0.1 K to ±0.3 K Test chamber internal dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1115 mm, Depth 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for buyers! For your safety, the following procedures are carried out in advance on our chambers on offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss Codpfx Aaoziiy Nj Doha Tipas: SC/KWT 450 Druskos purškimo kamera Techniniai duomenys: Bandymo kamera: 450 litrų Maksimali apkrova: 100 kg Druskos tirpalo talpa: 180 litrų Išoriniai matmenys: aukštis 920 mm, plotis 1930 mm, gylis 800 mm Bandymo kameros matmenys: aukštis 740 mm, plotis 850 mm, gylis 570 mm Naudojimo sritys: Korozijos bandymai: Druskos purškimo testas: kambario temp. iki +50°C Kondensato vandens testas: kambario temp. iki +45°C Drėkintuvas +75°C Temperatūros pastovumas Laikinis temperatūros nuokrypis ±K. Įtampa: 1/N/PE AC 230V ±10% 50Hz Nominali galia: 2,0 kW; nominali srovė: 8,7 A Kombinacija: Druskos purškimo testas SS: DIN 50021 Kondensato vandens testas KFW: DIN 50017 Normali aplinka (vėdinimas): DIN 50014 Svoris: 180 kg Būklė: naudota Komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi, informacija nėra galutinė!) Dėl papildomos informacijos prašome kreiptis telefonu.

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), Weiss Model: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor loading: Designed for a maximum payload of 250 kg Key data for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating: 25 K/min Cooling: 25 K/min (down to -45°C) Heat compensation: max. 8000 W Key data for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH (relative humidity) Climate performance data (excerpt) Humidity range: 10 to 98 % RH Humidity deviation (over time): At the center of usable space, in steady state, depending on the set point: ±1 to ±3 % RH Temperature deviation (over time): At the center of usable space, in steady state, depending on temperature: ±0.1 to ±0.3 K Temperature homogeneity (spatial): Referring to the set value (for ranges > 20 % RH): ±0.5 to ±1 K Chodpfjziiypjx Aa Dja Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, the following information: The following points are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All details are without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VTS 7018-5 Water-cooled temperature test chamber System converted to R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3,000 W Heat compensation at -20°C: 3,000 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Test chamber volume: 190 liters Nominal voltage: 3/N/PE AC, 400V ±10%, 50Hz Nominal power: 100 kW, Nominal current: 21 A Overcurrent protection (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): < 69 dB(A) Side port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R-452A and R23 Weight: approx. 460 kg For your safety as the buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate Chsdpfx Aoziixxea Doa 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors reserved!) Further questions can gladly be answered by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm Chedpfx Aaeziixre Doa External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability: The temporal temperature deviation is ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard atmosphere (ventilation): DIN 50014 Weight: 180 kg Cjdpfeziixfsx Aa Dsha Condition: used Scope of delivery: (See image) (Specifications and data may be subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Model: VT 7021 Temperature Test Chamber, Air-Cooled 1 Port, nominal width 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ±0.2 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±1.5 K Temperature Change Rate (Heating): 2.5 K/min Temperature Change Rate (Cooling): 2.5 K/min Maximum Heat Compensation: 800 W Test Chamber Dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External Dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical Connection: 1/NPE AC 230 V ±10% 50 Hz Rated Power: approx. 1.8 kW, Rated Current: 12 A Refrigerant: R404A and R23 Weight: 355 kg Important information for your security as a buyer! Chjdpfxsziiw Ij Aa Dsa The following steps are carried out on our offered chambers in advance: 1. Function test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: "Touch Panel" All control and operating commands can be executed by simply touching the functional icons on the "Touch Panel" control unit. Cedpfxeziiwuo Aa Doha Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: Right (R1): nominal width 125 mm Left (L1): nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.H. Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% r.H. Operating Data: Test chamber lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse (on-site): 16 A slow-blow Refrigerants: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional verification and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Modifications and errors in technical data are subject to change!) We will be happy to answer further questions by phone.