Bsm 100 pirkti naudotą (25 088)

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 17 700 € Lizingo įmoka: 339,84 € Spaudimo jėga: 100 t Cilindras: fiksuotas Eiga: 300 mm Įrengimo aukštis: 680 mm Gjdpfx Aeypbq Iecysip Atvira stovo plotis: 1520 mm Greitas eiga: 8 mm/s Darbo greitis: 5 mm/s Grįžtamoji eiga: 10 mm/s Stalas: 500x1520 mm Atvira skylė stale: 100 mm Skylių atstumas: 190 mm Ilgis: 2630 mm Plotis: 1000 mm Aukštis: 2350 mm Svoris: 2500 kg 2 kreiptuvai Presavimo plokštė su T formos grioveliais Stalas su T formos grioveliais Manometras Greita eiga su automatiniu perjungimu į darbo greitį Spaudimo gylis reguliuojamas kumšteliu Valdymas dviem rankom Reguliuojamas stalo aukštis Įranga pagal CE reikalavimus Eksploatavimo instrukcija VOKIEČIŲ ir ANGLŲ kalbomis

Būklė: naudotas, didžiausias leistinas svoris: 2 000 kg, bendras svoris: 2 600 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 02/2026, krovimo vietos ilgis: 2 675 mm, krovinių skyriaus plotis: 1 515 mm, krovos erdvės aukštis: 30 mm,

Būklė: naudotas, didžiausias leistinas svoris: 2 184 kg, bendras svoris: 2 700 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 02/2026, krovimo vietos ilgis: 3 070 mm, krovinių skyriaus plotis: 1 830 mm, bendras plotis: 2 320 mm, bendras aukštis: 980 mm,

Būklė: naudotas, didžiausias leistinas svoris: 615 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, pirmoji registracija: 01/2026, krovimo vietos ilgis: 2 011 mm, krovinių skyriaus plotis: 1 100 mm, krovos erdvės aukštis: 350 mm,

Būklė: naudotas, didžiausias leistinas svoris: 2 094 kg, bendras svoris: 2 700 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 02/2026, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 1 830 mm, krovos erdvės aukštis: 350 mm, bendras plotis: 1 960 mm, bendras aukštis: 1 020 mm,

Būklė: naudotas, didžiausias leistinas svoris: 911 kg, bendras svoris: 1 300 kg, ašių konfigūracija: 1 ašis, pirmoji registracija: 02/2026, krovimo vietos ilgis: 3 070 mm, krovinių skyriaus plotis: 1 530 mm, krovos erdvės aukštis: 350 mm, bendras plotis: 1 660 mm, bendras aukštis: 1 000 mm,

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 8 300 € Lizingo įmoka: 160,19 € Populiariausias modelis 1 Presavimo jėga: 100 t Cilindras: fiksuotas arba horizontaliai stumdomas Eiga: 300 mm Atvira rėmo erdvė: 1070 mm Darbo greitis: 5 mm/s Grįžimo greitis: 10 mm/s Ilgis: 2110 mm Plotis: 1000 mm Aukštis: 2430 mm Svoris: 1500 kg Horizontaliai stumdomas cilindras su fiksavimo svirtimi Giodpswirtzofx Acyjp Plieninė suvirinta konstrukcija Bet koks stabdymo taškas Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V prizmės Reguliuojamo aukščio stalas Stalo pakėlimo/nuleidimo įtaisas Valdymas su valdymo svirtimi Įranga pagal CE reikalavimus Eksploatacijos instrukcija VOKIEČIŲ ir ANGLŲ kalbomis

Būklė: naudotas, Gamybos metai: 2008, x-axis travel: 410 mm y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Max. machining diameter: 545 mm Max. machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance/Capacity: Max. swiveling range: 545 mm Max. machining diameter: 545 mm Max. bar work outer diameter: 51 mm Max. machining length: 519 mm Gisdpfx Acsyt R Idoysp Max. workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35–6,000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (engaged/return): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15–12,000 rpm Equipment/Accessories: - Chip conveyor - Mist extraction - Tools - Documentation

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 175 kW (237,93 AG), kuro tipas: hibridas, spalva: kitas, Gamybos metai: 2026, Įranga: borto kompiuteris, hidraulika, kabina, CONSTMACH Compact-100 vollautomatische Betonmischanlage ist eine Hochleistungs-Produktionsanlage, die speziell für Anwender entwickelt wurde, die maximale Effizienz bei begrenzten Platzverhältnissen suchen. Trotz ihres kompakten Designs erreicht dieses Modell eine Produktionskapazität von 100 m³/h und bietet so die Leistung einer stationären Betonmischanlage in einem portablen System. Das platzsparende Design bietet insbesondere bei innerstädtischen Projekten und beengten Aufstellflächen erhebliche Vorteile. Die Zuschlagstoff-Bunker des Compact-100 können je nach Projektanforderung linear oder quadratisch ausgeführt werden, was maximale Flexibilität bei der Anpassung an unterschiedliche Baustellenlayouts bietet. Dank schneller Montage und einfacher Transportfähigkeit zeichnet sich das Modell durch niedrige Betriebskosten bei minimalem Infrastrukturaufwand aus. Stahlgestützte Zementsilos und eine, mit Metallwänden versehene, Zuschlagstofframpe machen ein Fundament aus Beton überflüssig und verkürzen die Montagezeit erheblich. Für den Mischer stehen folgende Alternativen zur Auswahl: Doppelwellen-, Einfachwellen-, Teller- oder Planetenmischer. Gjdoxp U Dmjpfx Acyjip Diese Flexibilität ermöglicht die Anpassung an verschiedene Anwendungen wie die Herstellung von Transportbeton, Trockenbeton oder Fertigteilproduktion. Das Automatisierungssystem mit SIEMENS- und SCHNEIDER-Komponenten bietet dem Bediener über eine benutzerfreundliche Oberfläche vollständige Kontrolle. Compact-100 Betonmischanlage – Technische Daten Produktionskapazität: 100 m³/h Gewicht: 32 t Gesamtmotorleistung: 175 kW Erforderlicher Stromgenerator: 250 kVA Mischertypen: Tellermischer – Einfachwelle – Doppelwelle – Planetenmischer Benötigte Aufstellfläche: 300 m² Zuschlagstoff-Bunker: 4 x 20 m³ Zuschlagstoff-Wiegebehälter: 3 m³ Zuschlagstoff-Wiegeband: 1000 x 11.100 mm Zuschlagstoff-Transferkübel: 3 m³ Mischer-Füllmenge Frischbeton: 2 m³ Zementwiegebehälter: 1.200 kg Wasserwiegebehälter: 600 Liter Zusatzmittel-Wiegebehälter: 50 Liter Luftkompressor: 500 Liter, 5,5 kW Zementsilo: 50 – 500 Tonnen Steuerung: Vollautomatisch Warum die Compact-100 Betonmischanlage wählen? Die CONSTMACH Compact-100 bietet eine innovative Lösung, die hohe Kapazität mit kompakter Bauweise vereint. Dank schneller Montage, geringem Energieverbrauch und minimalem Infrastrukturbedarf verschafft sie Ihrem Projekt Zeit- und Kostenvorteile. Die nach CE-Norm gefertigte Anlage garantiert höchste Zuverlässigkeit durch langlebige Materialqualität und erstklassige Komponenten. Das flexible Design ermöglicht die einfache Anpassung an unterschiedliche Fertigungstypen. Wer nachhaltig hochwertigen Beton herstellen will, findet in der von CONSTMACH garantierten Compact-100 die ideale Wahl für Profis, die Wert auf Leistung und Langlebigkeit legen. Was macht Constmach? Constmach ist ein führender Maschinenhersteller für die Bau- und Bergbauindustrie mit einem umfangreichen Angebot, das auf die spezifischen Anforderungen zugeschnitten ist. Das Produktspektrum umfasst Betonsteinmaschinen, stationäre und mobile Betonmischanlagen, Brech- und Siebanlagen, Sandwaschmaschinen, Sandherstellungsanlagen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher und mobile Brechanlagen. Mit höchsten Qualitätsstandards, innovativen Produktionsmethoden und kundenorientierten Lösungen ist Constmach eine zuverlässige Marke auf nationalen wie internationalen Märkten. Dank Langlebigkeit, Effizienz und dauerhafter Leistungsfähigkeit bleiben unsere Produkt

Būklė: naudotas, didžiausias leistinas svoris: 574 kg, bendras svoris: 750 kg, ašių konfigūracija: 1 ašis, pirmoji registracija: 08/2022, krovimo vietos ilgis: 2 600 mm, krovinių skyriaus plotis: 1 550 mm, krovos erdvės aukštis: 145 mm, bendras plotis: 2 047 mm, bendras aukštis: 905 mm,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Tandem roller Bomag BW 100 AD-5, year of manufacture 2015, 2941 operating hours, 3-cylinder Kubota diesel engine, weight 2662 kg, edge cutter with 2 cutting blades, front drum has been replaced, serial no. 101880191338 Gijdpfx Acsidqp Neyop

Būklė: naudotas, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC control: HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical travel of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Table clamping area: 1570 x 500 mm Distance spindle nose - table: 130 - 720 mm Distance spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total connected load: 20 kW Power supply: 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y, and Z quill adjustment - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of milling head with cut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool carrier with 21 tool stations - Coolant system integrated in machine base - Control cabinet fixed to the machine Giedpfx Acjhik Ezsyjp - Documentation: operating manual, control manual, and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Very good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 4 000 mm, konvejerio juostos plotis: 1 000 mm, bendras ilgis: 4 100 mm, bendras plotis: 1 100 mm, galia: 0,12 kW (0,16 AG), įėjimo dažnis: 50 Hz, Gamintojas: SCHUMA Tipas: PRO-EU 4000/1000/GL Gedpfx Aceylzuxeyjip Ilgis: 4000 mm Plotis: 1000 mm Aukštis reguliuojamas

Būklė: labai geros būklės (naudotas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Gsdpfxsx Eabpo Acysip Device Description: The climate test chamber enables evaluation of the function or material properties of test objects under the influence of temperature and humidity. Efficient air circulation with a correspondingly high airflow ensures excellent transfer conditions to the test item. The air-handling module is located at the rear of the chamber. The plant aggregates are mounted in a separate frame behind the unit for easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature fluctuation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiation, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temperature accuracy: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test item, no radiant load, and without auxiliary equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Viewing available by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see image) (Subject to changes and errors in technical data and descriptions!) Feel free to contact us by phone with any further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: Giedpfx Acsx Eaxboysp - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Gijdpfx Acjx D Abpsysp - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Giodpfjvtl Hqsx Acysp Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Gsdpfx Asvb Hanjcyoip Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Godpjvb E Uqsfx Acysip Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), Gamybos metai: 2006, galia: 3 kW (4,08 AG), Zentner Soltec sietų plovimo įrenginys ST 100 Gamintojas: Zentner Systems GmbH Modelis: Soltec ST 100 Pagaminimo metai: 2006 Serijos numeris: 0505 / 06 Darbinė įtampa: 3 × 400 V Tinklo dažnis: 50 Hz Gedpfsyrndgex Acyoip Darbinė galia: 3 kW Darbinis slėgis (oras): 6,0 bar Konstrukcija: Uždara nerūdijančio plieno sietų plovimo kabina Taikymo sritis: Automatinis šilkografijos rėmelių valymas Ypatumai: – Yra EX ženklinimas – Integruota ištraukimo/ventiliacijos sistema – Kompaktiškas dizainas su atskiru valdymo skydeliu Vieta: Šierlingas Apžiūrėti galima susitarus dėl laiko.

Būklė: naudotas, Gamybos metai: 1996, Baldwin 851-100 1996 Puikios būklės Gsdpoytb S Tjfx Acyeip

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Uždarymo jėga 500 kN Atidarymo jėga 40 kN Giodpfx Acsxrymloyop Atidarymo eiga 250 mm Sraigto skersmuo 15 mm Įeina 2 vnt. WITTMANN temperatūros reguliavimo prietaisų Įeina 15 mm atsarginė sraigė Įeina visa dokumentacija

Būklė: naudotas, rida: 50 000 km, galia: 73 kW (99,25 AG), pirmoji registracija: 05/2019, kuro tipas: dyzelinas, tuščias svoris: 1 848 kg, bendras svoris: 2 340 kg, kita apžiūra (TÜV): 07/2027, kuras: dyzelinas, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: kitas, sėdimų vietų skaičius: 2, bendras ilgis: 4 403 mm, statybinis aukštis: 1 880 mm, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, stumdomos durys, suodžių filtras,

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 4 mėnesiai nuo užsakymo Kilmės šalis: Italija Kaina: 31 400 € Lizingo įmoka: 599,74 € Presavimo jėga: 100 t Eiga: 500 mm Stalas: 800x600 mm Įdiegimo aukštis: 615 mm Greitas judėjimas: 26 mm/s Darbo greitis: 4 mm/s Variklis: 4 kW Ilgis: 1600 mm Giedoynnd Sopfx Acyep Plotis: 900 mm Aukštis: 2300 mm Svoris: 3100 kg 2 greičiai Reguliuojamas maksimalus slėgis Manometras

Būklė: naudotas, Gamybos metai: 2023, Būklė: naudota Pagaminimo metai: 2023 Sandėlio numeris: 7280 Pristatymo laikas: iš karto, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 15 700 € Sandėlyje: 1 Presavimo jėga: 100 t Cilindras fiksuotas arba slankus: fiksuotas Lankstymo ilgis: 1020 mm Eiga: 300 mm Atstumas tarp rėmų: 1020 mm Atstumas tarp stalo ir įrankio laikiklio: 680 mm Greitasis eiga: 9 mm/s Darbinis greitis: 5 mm/s Grįžimo greitis: 10 mm/s Maks. lankstymo pajėgumas (statybinis plienas): 6 mm Stalas: 500x1020 mm Skersinis skylė stalo viduryje: 100 mm Skylių atstumas: 190 mm Ilgis: 2110 mm Plotis: 1000 mm Aukštis: 2275 mm Svoris: 2082 kg Demonstracinis įrenginys / beveik kaip naujas Grynoji kaina (naujos kaina € 19.550,00) 2 kreipiančiosios Didelė smūginė plokštė ir didelis prilaikantis stalas su T formos grioveliais Viršutinis ir apatinis įrankiai lankstymui Manometras Greitas padavimas su automatiniu perjungimu į darbinį greitį Stūmoklis gali būti sustabdytas bet kurioje padėtyje Valdymas dviem rankomis IR PEDALU Stalas reguliuojamo aukščio Atitiktis CE reikalavimams Godoynm Nmspfx Acyjip Eksploatavimo instrukcija vokiečių ir anglų kalbomis