Briketai pirkti naudotą (156)

Būklė: naujas, Gamybos metai: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD Kdjdpsnxkrbsfx Albol YOUR ADVANTAGES AT A GLANCE - Fully automated 24/7 operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production lines possible - Over 35 years of experience The RUF LIGNUM Classic wood briquetting press is ideally suited for briquetting medium quantities of wood chips generated in the woodworking industry. The briquetting process enables increased revenues as well as reduced storage and transport costs. Another advantage is the flexibility of our wood briquetting presses, which can process various material sizes into high-quality briquettes—completely without binders. As a result, RUF briquettes, as a valuable energy source, feature a higher utility value and optimal CO2 footprint. Our LIGNUM series also impresses with its innovative RUF hydraulics, delivering high energy efficiency and low wear. Technical Data RUF LIGNUM CLASSIC - Max. throughput rate wood (kg/h): 410 - Motor power (kW): 30 - Max. specific pressing pressure (kg/cm²): 1700 - Briquette size (mm): 150x60 - Dimensions (m) (L x W x H): 2.1 x 1.9 x 2.0 - Approx. weight (t): 3.3 t - with extraction ports - PACKAGING TABLE INCLUDED FREE OF CHARGE

Būklė: naujas, 20-26-537/1 FALACH hidraulinė briketavimo presas (naujas) Tipas: 50 Briketų skersmuo: 50 mm Presavimo našumas: 40 - 60 kg/val. Briketų ilgis (reguliuojamas): apie 35 mm Bunkerio talpa: 0,38 m3 Kdsdpfexrn R Esx Albol Siurblio variklio galia: 5,5 kW Energijos suvartojimas: 3,8 kW/val. Reikalinga įtampa ir srovė: 3x400V, 16 A Alyvos aušintuvas: taip Darbo režimas: nuolatinis Automatinis atraminių ratukų atitraukimas: taip Automatinis išsijungimas: taip Didžiausias drėgmės kiekis: 15 % Briketų savitasis svoris: 900 kg/m3 Didžiausias triukšmo lygis: 68 dB Transportavimo matmenys: 1860 - 890 - 1100 mm Svoris: 390 kg Kaina: 13 030 Eur (EXW Jonava, Lietuva)

Būklė: naujas, 20-26-537/4 FALACH hidraulinė briketavimo presas (naujas) Tipas: CUBE 20 Briketo skersmuo: 30 x 30 mm Presavimo našumas: 10-25 kg/val. Briketo ilgis: apie 6-50 mm Talpos tūris: 0,28 m3 Ksdoxrn Uwepfx Albsdl Siurblio variklio galia: 2,2 kW Elektros suvartojimas: 1,1 kW/val. Reikalinga įtampa ir srovė: 3x400V, 16 A Alyvos aušintuvas: nėra Darbas: nepertraukiamas Atraminių ratukų automatinis grįžimas: nėra Automatinis išjungimas: nėra Max. drėgmės kiekis: 15 % Briketų savitasis svoris: 900-1100 kg/m3 Didžiausias triukšmo lygis: 62 dB Transportavimo matmenys: 1300-740-1120 mm Svoris: 233 kg Kaina: 8190 Eur (EXW Jonava, Lietuva)

Būklė: naujas, 20-26-537 FALACH hidraulinis briketavimo presas (naujas) Tipas: Falach 35 Briketo skersmuo: 50 mm Presavimo našumas: 25 - 40 kg/val. Ksdoxrn Dxepfx Albsdl Briketo ilgis apie 20-40 mm Talpyklos tūris: 0,38 m3 Siurblio variklio galia: 4 kW Energijos sąnaudos: 2,2 kW/val. Reikalinga įtampa: 3x400V, 16 A Alyvos aušintuvas: nėra Darbo režimas: nenutrūkstamas Atraminių ratukų automatinis atbulinis judėjimas: taip Automatinis išjungimas: taip Didžiausias drėgmės kiekis: 15 % Briketo specifinis svoris: 900 kg/m3 Didžiausias triukšmo lygis: 68 dB Transportavimo matmenys: 1860 x 890 x 1100 mm Svoris: 400 kg Kaina: 11 160 Eur (EXW Jonava, Lietuva)

Būklė: naujas, 20-26-537/3 FALACH hidraulinė briketavimo presas (naujas) Tipas 100 Briketo skersmuo 70 mm Presavimo našumas 90–120 kg/val. Briketo ilgis reguliuojamas, apie 45 mm Bunkerio talpa 0,75 m3 Siurblio variklio galia 11 kW Energijos sąnaudos 8,2 kW/val. Reikalinga elektros įtampa ir srovė 3x400 V, 32 A Alyvos aušintuvas: yra Darbo režimas: nepertraukiamas Automatinis atraminių ratų atbulinis režimas: yra Kjdpfx Aoxrn Ukjlbodl Automatinis išjungimas: yra Didžiausias drėgmės kiekis: 15% Briketų savitasis svoris: 900–1100 kg/m3 Didžiausias triukšmo lygis: 68 dB Transportavimo matmenys: 2220 × 1200 × 1510 mm Svoris: 810 kg Kaina: 26 230 Eur (EXW Jonava, Lietuva)

Būklė: naujas, 20-26-537/2 FALACH hidraulinis briketavimo presas (naujas) Tipas 70 Briketo skersmuo: 70 mm Presavimo našumas: 60 - 80 kg/val. Briketo ilgis apie 40–60 mm Bunkerio talpa: 0,75 m3 Siurblio variklio galia: 7,5 kW Energijos suvartojimas: 4,9 kW/val. Reikalinga įtampa ir srovė: 3x400V, 25 A Alyvos aušintuvas: nėra Darbas: nepertraukiamas Automatinis atraminių ratukų grąžinimas: taip Kodpfsxrn Tgjx Albedl Automatinis išjungimas: taip Didžiausias drėgmės kiekis: 15 % Briketų savitasis svoris: 900-1100 kg/m3 Didžiausias triukšmo lygis: 68 dB Transportavimo matmenys: 2220 - 1200 – 1510 mm Svoris: 840 kg Kaina: 20 270 Eur (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7985 TECHNINIAI DUOMENYS - spaudimo jėga: hidraulinė - briketo forma: apvali - briketo skersmuo: 50 mm Kdsdjy Id Smopfx Albsl - talpos skersmuo: 1000 mm - našumas: iki 10 briketų/min, apie 90 kg/val. - automatinis mašinos darbo režimas - variklis: 5,5 kW - matmenys (ilgis/plotis/aukštis): 1720x1100x1500 mm - svoris: apie 650 kg PRIVALUMAI – itališka gamyba – naudota briketavimo mašina – nedažyta – labai gera būklė Grynoji kaina: 32 900 PLN Grynoji kaina: 7 830 EUR pagal kursą 4,2 EUR (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7153 TECHNINIAI DUOMENYS - Spaudimo jėga: hidraulinė - Briketo forma: apvali - Briketo skersmuo: 70 mm - Talpos matmenys (A/P): 920x870 mm - Našumas: apie 110 kg/val. - Automatinis mašinos darbas Ksdpfoyyyuzsx Albjdl - Alyvos aušintuvas - Alyvos šildymas - Apžiūros langelis - Variklis: 7,5 kW - Matmenys (I/P/A): 1750x1300x1460 mm - Svoris: 825 kg PRIVALUMAI – Nedažyta – Italų gamyba – Naudota briketavimo mašina – Labai gera būklė Grynasis kaina: 38 900 PLN Grynasis kaina: 9 260 EUR (pagal kursą 4,2 EUR) (Kainos gali keistis esant didesniems kursų svyravimams)

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, variklio galia: 4 kW Kdodpfxsy Sgrke Albel briketų skersmuo: 50 mm našumas: apie 40 kg/h valdymas iš elektros skydinės

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 900 mm, bendras aukštis: 1 800 mm, bendras ilgis: 2 500 mm, briketo skersmuo: 80 mm, bendras svoris: 2 400 kg, įvesties srovės tipas: trifazis, alyvos bako talpa: 600 l, – after technical inspection – Italian production – year of manufacture: 2006 – Technical Documentation (DTR) TECHNICAL PARAMETERS: – Briquette diameter: 80 mm – Max. briquette length: 80 mm – Output: 350 kg/h – Motor power: 27.5 kW – Hydraulic pressing force: 1400 kg/cm² – Max. working pressure: 150 bar – Oil capacity: 600 l – Hopper diameter: Ø 1200 mm Ksdpfx Ajv T Uphjlbjdl – Hopper height: 90 cm – Dimensions (L/W/H): 2500 x 1900 x 1800 mm – Net weight: 2400 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1113, bendras plotis: 1 170 mm, bendras aukštis: 1 510 mm, bendras ilgis: 1 850 mm, briketo skersmuo: 60 mm, bendras svoris: 770 kg, Never used = as-new machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price quoted without cooling system) - Sufficiently large hopper ensures long machine operation without the need for material replenishment Technical specifications: Motor power: 7.5 kW Briquette output: 40-100 kg/h depending on material Briquette diameter: 60 mm Briquette length steps max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Kdodpjyh Nfhsfx Albol Features: Hydraulic unit: 7 pressing cycles/min SIEMENS LCD touch programmable control panel Manual or fully automatic operation – PLC control – SIEMENS Double manometer for optimal pressure monitoring Level sensor for the briquetting material Oil level sensor Preheating unit for operation in cold environments Inspection window Option for integration with other machines in the line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Būklė: naudotas, Techniniai duomenys: Briketo skersmuo: 50 mm Briketo ilgis: 50 mm Talpos skersmuo: 1000 mm Talpos aukštis: 920+1000 mm Našumas: ~50 kg/val. Maitinimas: 380 V Variklio galia: 4 kW Avarinis jungiklis Bendri matmenys: Ilgis: 1600 mm Plotis: 1100 mm Aukštis: 1500+1000 mm Kedpfey N Taiox Albedl

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Kjdpjd Nm Sijfx Albodl Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density Ksdpfxsgl Nlmj Albedl *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio Kdsdpfxochqxxe Albol The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality *depending on material. The large-sized press cylinder and the 80 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and the hydraulic oil (recommended if the press is to run regularly for longer than approx. 3.5 hours without interruption) Briquette diameter: 80 mm Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Capacity (material dependent): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volts / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Option: cooling for press tongs – yes, with special accessory "coolable press tongs" Option: hydraulic oil cooling – yes Cooling of press tongs and hydraulic oil with cooling unit (special accessory) Option: fill level monitoring – yes Option: continuous briquette – yes (material-dependent) Option: enlarged feed slide – yes, with special accessory "enlarged feed slide" CE compliant . Raw material requirements: - The moisture content (absolutely dry) must be at least 6% and no more than 18% Kdedpfsxfwdex Albjl - Maximum chip length: 20 mm - Installation temperature: temperature-controlled room, at least +5°C - Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration model Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine Including control cabinet with timer operation The press is started manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Output capacity up to max. 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content below 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically Kjdpfsfci D Aex Albedl * NEW!!! Now also available in 230 Volt, Motor 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport Kdsdjgfm Ryopfx Albel • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: geras (naudotas), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Kdedpfxst Hxudo Albel Functional guarantee upon handover

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Ksdpfx Asd N Dnholbedl Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Kdedpfx Alofmqq Ejbjl Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: geras (naudotas), Refurbished Used Machine Base machine price from: €147,700 net Ksdpfx Alo E Dqusbsdl *Options available at extra cost, see below with full 1-year warranty Delivery approx. 16 weeks after order Technical data: Throughput capacity up to 1200 kg/h (material dependent) (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm including 2 m press channel Main motor power: 45 kW Feed screw geared motor: 2 x 2.2 kW Compressor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operational status and load indicator for main drive and feed screws PLC control Siemens S7/300 with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT -Temperature control unit for press tools For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation including corresponding control system €7,850 net -Guillotine, for cutting briquettes to length Compressed air connection required onsite €6,940 net plus VAT -Transport duct / cooling section (nominal: 4 x 2 m) per 2 meters: €990 net Assembly / Commissioning (nominal per press approx. 2-3 days onsite) Billed according to actual effort, at the following rates: Service technician/mechatronics engineer per installation & travel hour: €129.00 Overtime: +25% surcharge Each Saturday & night hour: +50% surcharge Each Sunday & public holiday hour: +100% surcharge Travel expenses per technician per day: country-dependent Per car/transporter & km: €0.98/km Travel and accommodation on submission of receipts or flat rate at the client’s expense. Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net --- Raw material requirements: - Moisture content (oven-dry basis) must be at least 6% and max. 18% - Maximum chip length 20 mm - Installation temperature: heated room with at least +5°C - Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Kdsdpfxod Nnwlj Albjl Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Type Classic – throughput up to 425 kg/h *depending on material Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life Kodpfx Aofhql Telbsdl + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Būklė: geras (naudotas), Gamybos metai: 2001, Gera, naudota būklė Mažai darbo valandų (1675 val.). Variklis: 11 kW Slėgis: reguliuojamas iki maks. 250 bar Našumas iki maks. 220 kg/val. Briketas: 150x60 mm Presavimo matmenys: apie 2200x3000x1920 mm (IxPxA) Valdymo spintos matmenys: 500x1250x2120 mm (IxPxA) Svoris apie 3000 kg Kedpfxswcc D Rj Albedl